Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
terminalprogramme starten beim wiederhochholen xserver neu
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page 1, 2, 3, 4  Next  
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Fri Mar 12, 2010 3:32 pm    Post subject: terminalprogramme starten beim wiederhochholen xserver neu Reply with quote

ich benutze kde (4.3.5) und hab dort das programm konsole auf und darin 10 oder mehr tabs laufen
wenn ich das programm in die taskleiste ablege und wieder hochholen will kommt es gelegentlich vor das sich der xorg neustartet
ich habe schon sämtliche nvidia treiber durchprobiert, nutze zur zeit den aktuellen x11-drivers/nvidia-drivers-190.42-r3
hab die 3d funktionen im kde auch ganz abgeschaltet, aber es hilft nicht

/var/log/Xorg.0.log.old
Code:

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r10 i686
Current Operating System: Linux desktop 2.6.31-gentoo-r10 #8 SMP Sun Mar 7 03:49:00 CET 2010 i686
Build Date: 26 February 2010  02:13:17AM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 10 23:52:41 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/misc/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi/" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x3aa0
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 5.0
   X.Org XInput driver : 4.0
   X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0402:1043:8243 nVidia Corporation G84 [GeForce 8600 GT] rev 161, Mem @ 0xe6000000/16777216, 0xd0000000/268435456, 0xe4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Server Extension
(II) NVIDIA GLX Module  190.42  Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  190.42  Tue Oct 20 20:26:00 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Mar 10 23:52:41 NVIDIA(0): Enabling RENDER acceleration
(II) Mar 10 23:52:41 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Mar 10 23:52:41 NVIDIA(0):     enabled.
(II) Mar 10 23:52:43 NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
(--) Mar 10 23:52:43 NVIDIA(0): Memory: 524288 kBytes
(--) Mar 10 23:52:43 NVIDIA(0): VideoBIOS: 60.84.41.00.00
(II) Mar 10 23:52:43 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Mar 10 23:52:43 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Mar 10 23:52:43 NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0:
(--) Mar 10 23:52:43 NVIDIA(0):     HP LP3065 (DFP-0)
(--) Mar 10 23:52:43 NVIDIA(0): HP LP3065 (DFP-0): 330.0 MHz maximum pixel clock
(--) Mar 10 23:52:43 NVIDIA(0): HP LP3065 (DFP-0): Internal Dual Link TMDS
(II) Mar 10 23:52:43 NVIDIA(0): Assigned Display Device: DFP-0
(==) Mar 10 23:52:43 NVIDIA(0):
(==) Mar 10 23:52:43 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Mar 10 23:52:43 NVIDIA(0):     will be used as the requested mode.
(==) Mar 10 23:52:43 NVIDIA(0):
(II) Mar 10 23:52:43 NVIDIA(0): Validated modes:
(II) Mar 10 23:52:43 NVIDIA(0):     "nvidia-auto-select"
(II) Mar 10 23:52:43 NVIDIA(0): Virtual screen size determined to be 2560 x 1600
(--) Mar 10 23:52:43 NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
(--) Mar 10 23:52:43 NVIDIA(0):     option
(==) Mar 10 23:52:43 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) Mar 10 23:52:43 NVIDIA(0): Initialized GPU GART.
(II) Mar 10 23:52:43 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Mar 10 23:52:43 NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) Mar 10 23:52:43 NVIDIA(0):     configuration option may not be set correctly.  When the
(II) Mar 10 23:52:43 NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) Mar 10 23:52:43 NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) Mar 10 23:52:43 NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) Mar 10 23:52:43 NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) Mar 10 23:52:43 NVIDIA(0):     Config Options in the README.
(II) Mar 10 23:52:43 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Mar 10 23:52:43 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Mar 10 23:52:43 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 2.3.2
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Wired Keyboard 600
(**) Microsoft Wired Keyboard 600: always reports core events
(**) Microsoft Wired Keyboard 600: Device: "/dev/input/event5"
(II) Microsoft Wired Keyboard 600: Found 1 mouse buttons
(II) Microsoft Wired Keyboard 600: Found scroll wheel(s)
(II) Microsoft Wired Keyboard 600: Found relative axes
(II) Microsoft Wired Keyboard 600: Found absolute axes
(II) Microsoft Wired Keyboard 600: Found x and y absolute axes
(II) Microsoft Wired Keyboard 600: Found keys
(II) Microsoft Wired Keyboard 600: Configuring as mouse
(II) Microsoft Wired Keyboard 600: Configuring as keyboard
(**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
(**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
(**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
(**) Microsoft Wired Keyboard 600: (accel) filter chain progression: 2.00
(**) Microsoft Wired Keyboard 600: (accel) filter stage 0: 20.00 ms
(**) Microsoft Wired Keyboard 600: (accel) set acceleration profile 0
(II) Microsoft Wired Keyboard 600: initialized for absolute axes.
(II) config/hal: Adding input device Microsoft Wired Keyboard 600
(**) Microsoft Wired Keyboard 600: always reports core events
(**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
(II) Microsoft Wired Keyboard 600: Found keys
(II) Microsoft Wired Keyboard 600: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Microsoft IntelliMouse® Explorer
(**) Microsoft Microsoft IntelliMouse® Explorer: always reports core events
(**) Microsoft Microsoft IntelliMouse® Explorer: Device: "/dev/input/event3"
(II) Microsoft Microsoft IntelliMouse® Explorer: Found 9 mouse buttons
(II) Microsoft Microsoft IntelliMouse® Explorer: Found scroll wheel(s)
(II) Microsoft Microsoft IntelliMouse® Explorer: Found relative axes
(II) Microsoft Microsoft IntelliMouse® Explorer: Found x and y relative axes
(II) Microsoft Microsoft IntelliMouse® Explorer: Configuring as mouse
(**) Microsoft Microsoft IntelliMouse® Explorer: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft IntelliMouse® Explorer: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft IntelliMouse® Explorer" (type: MOUSE)
(**) Microsoft Microsoft IntelliMouse® Explorer: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft IntelliMouse® Explorer: (accel) filter chain progression: 2.00
(**) Microsoft Microsoft IntelliMouse® Explorer: (accel) filter stage 0: 20.00 ms
(**) Microsoft Microsoft IntelliMouse® Explorer: (accel) set acceleration profile 0
(II) Microsoft Microsoft IntelliMouse® Explorer: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Mar 10 23:52:48 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Mar 10 23:52:48 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Mar 10 23:52:48 NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) Mar 10 23:52:48 NVIDIA(0):     configuration option may not be set correctly.  When the
(II) Mar 10 23:52:48 NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) Mar 10 23:52:48 NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) Mar 10 23:52:48 NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) Mar 10 23:52:48 NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) Mar 10 23:52:48 NVIDIA(0):     Config Options in the README.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Microsoft Wired Keyboard 600: Device reopened after 1 attempts.
(II) Microsoft Wired Keyboard 600: Device reopened after 1 attempts.
(II) Microsoft Microsoft IntelliMouse® Explorer: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Mar 11 00:29:04 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Mar 11 00:29:04 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Mar 11 00:29:04 NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) Mar 11 00:29:04 NVIDIA(0):     configuration option may not be set correctly.  When the
(II) Mar 11 00:29:04 NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) Mar 11 00:29:04 NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) Mar 11 00:29:04 NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) Mar 11 00:29:04 NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) Mar 11 00:29:04 NVIDIA(0):     Config Options in the README.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Microsoft Wired Keyboard 600: Device reopened after 1 attempts.
(II) Microsoft Wired Keyboard 600: Device reopened after 1 attempts.
(II) Microsoft Microsoft IntelliMouse® Explorer: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.

Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x812f37b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80c6a71]
2: [0xb77a5400]
3: /usr/lib/libpixman-1.so.0 [0xb7701cf5]
4: /usr/lib/libpixman-1.so.0 [0xb76d22e9]
5: /usr/lib/libpixman-1.so.0 [0xb76f8fd0]
6: /usr/lib/libpixman-1.so.0 [0xb77023ba]
7: /usr/lib/libpixman-1.so.0 [0xb77031b7]
8: /usr/lib/libpixman-1.so.0 [0xb76f8c9b]
9: /usr/lib/libpixman-1.so.0 [0xb76d2fe3]
10: /usr/lib/libpixman-1.so.0 [0xb76faef5]
11: /usr/lib/libpixman-1.so.0 [0xb76d2fe3]
12: /usr/lib/libpixman-1.so.0 [0xb7707333]
13: /usr/lib/libpixman-1.so.0 [0xb76d2fe3]
14: /usr/lib/libpixman-1.so.0 [0xb770e6bb]
15: /usr/lib/libpixman-1.so.0 [0xb76d2fe3]
16: /usr/lib/libpixman-1.so.0(pixman_image_composite+0x16c) [0xb76f9c2c]
17: /usr/lib/xorg/modules//libwfb.so(wfbComposite+0x1b2) [0xb5b73442]
18: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0xb5ea5c47]

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support
    at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Microsoft Wired Keyboard 600: Close
(II) UnloadModule: "evdev"
(II) Microsoft Wired Keyboard 600: Close
(II) UnloadModule: "evdev"
(II) Microsoft Microsoft IntelliMouse® Explorer: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"


/var/log/messages
Code:
Mar 12 15:16:46 desktop kernel: [141878.545141] usb 1-6.1.1: unlink qh8-0601/f6ca3480 start 5 [1/2 us]
Mar 12 15:16:47 desktop su[4760]: pam_unix(su:session): session closed for user root
Mar 12 15:16:47 desktop su[4724]: pam_unix(su:session): session closed for user root
Mar 12 15:16:47 desktop su[4822]: pam_unix(su:session): session closed for user root
Mar 12 15:16:47 desktop su[4743]: pam_unix(su:session): session closed for user root
Mar 12 15:16:47 desktop su[4710]: pam_unix(su:session): session closed for user root
Mar 12 15:16:47 desktop kernel: [141879.163918] X used greatest stack depth: 5032 bytes left
Mar 12 15:16:47 desktop kdm[4033]: X server for display :0 terminated unexpectedly
Mar 12 15:16:47 desktop su[4695]: pam_unix(su:session): session closed for user root
Mar 12 15:16:47 desktop kdm: :0[4041]: pam_unix(kde:session): session closed for user peter
Mar 12 15:16:49 desktop kernel: [141880.647142] ehci_hcd 0000:00:1a.7: reused qh f6ca3480 schedule
Mar 12 15:16:49 desktop kernel: [141880.647146] usb 1-6.1.1: link qh8-0601/f6ca3480 start 5 [1/2 us]
Mar 12 15:16:58 desktop kdm: :0[19251]: pam_unix(kde:session): session opened for user peter by (uid=0)


dmesg
Code:
[141878.545141] usb 1-6.1.1: unlink qh8-0601/f6ca3480 start 5 [1/2 us]
[141879.163918] X used greatest stack depth: 5032 bytes left
[141880.647142] ehci_hcd 0000:00:1a.7: reused qh f6ca3480 schedule
[141880.647146] usb 1-6.1.1: link qh8-0601/f6ca3480 start 5 [1/2 us]


emerge --info
Code:
Portage 2.1.7.17 (default/linux/x86/10.0/desktop, gcc-4.3.4, glibc-2.10.1-r1, 2.6.31-gentoo-r10 i686)
=================================================================                                   
System uname: Linux-2.6.31-gentoo-r10-i686-Intel-R-_Core-TM-2_Duo_CPU_E8400_@_3.00GHz-with-gentoo-1.12.13
Timestamp of tree: Fri, 12 Mar 2010 11:45:03 +0000                                                       
ccache version 2.4 [enabled]                                                                             
app-shells/bash:     4.0_p35                                                                             
dev-java/java-config: 2.1.10
dev-lang/python:     2.6.4-r1
dev-util/ccache:     2.4-r7
dev-util/cmake:      2.6.4-r3
sys-apps/baselayout: 1.12.13
sys-apps/sandbox:    1.6-r2
sys-devel/autoconf:  2.13, 2.63-r1
sys-devel/automake:  1.8.5-r4, 1.9.6-r3, 1.10.3, 1.11.1
sys-devel/binutils:  2.18-r3
sys-devel/gcc:       4.3.4
sys-devel/gcc-config: 1.4.1
sys-devel/libtool:   2.2.6b
virtual/os-headers:  2.6.30-r1
ACCEPT_KEYWORDS="x86"
ACCEPT_LICENSE="* -@EULA"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="assume-digests ccache distlocks fixpackages news parallel-fetch protect-owned sandbox sfperms strict unmerge-logs unmerge-orphans userfetch"
LANG="de_DE.UTF-8"
LDFLAGS="-Wl,-O1"
LINGUAS="de"
MAKEOPTS="-j4"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
USE="X a52 aac acl acpi alsa berkdb bluetooth branding bzip2 cairo cdr cli consolekit cracklib crypt cxx dbus dri dts dvd dvdr eds emboss encode evo fam ffmpeg firefox flac fortran gdbm gif gnome gpm gstreamer gtk hal httpd iconv id3tag ipv6 jpeg kde ldap libnotify lm_sensors mad matroska mikmod mmx mmxext mng modules mp3 mp4 mpeg mudflap mysql ncurses nls nptl nptlonly nvidia ogg opengl openmp pam pcre pdf perl png ppds pppd python qt3support qt4 quicktime readline reflection sdl session spell spl sql sqlite sse sse2 ssl ssse3 startup-notification svg sysfs tcpd thunar tiff truetype unicode usb vorbis webkit win32codecs x264 x86 xml xorg xulrunner xv xvid zlib" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mmap_emul mulaw multi null plug rate route share shm softvol" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" ELIBC="glibc" INPUT_DEVICES="evdev keyboard mouse" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LINGUAS="de" RUBY_TARGETS="ruby18" USERLAND="GNU" VIDEO_CARDS="nv nvidia vesa vga"
Unset:  CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, FFLAGS, INSTALL_MASK, LC_ALL, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, PORTDIR_OVERLAY


/etc/X11/xorg.conf
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Tue Oct 20 21:00:15 PDT 2009

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"   
EndSection                                   

Section "Files"
EndSection

Section "InputDevice"
    # generated from data in "/etc/conf.d/gpm"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol"
    Option         "Device" "/dev/input/mice"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection


vor enigen tagen habe ich mir diese 31 pakete per "emerge --sync ; emerge -uaDvN" world ins system geholt
Code:
1268253184:  ::: completed emerge (1 of 31) sys-libs/timezone-data-2010b to /
1268253200:  ::: completed emerge (2 of 31) dev-libs/libffi-3.0.9 to /
1268253259:  ::: completed emerge (3 of 31) dev-db/sqlite-3.6.22-r2 to /
1268253451:  ::: completed emerge (4 of 31) sys-devel/gettext-0.17-r1 to /
1268253484:  ::: completed emerge (5 of 31) app-text/recode-3.6_p16 to /
1268253543:  ::: completed emerge (6 of 31) media-gfx/exiv2-0.19 to /
1268253884:  ::: completed emerge (7 of 31) dev-db/mysql-5.0.90-r2 to /
1268254009:  ::: completed emerge (8 of 31) dev-libs/glib-2.22.4 to /
1268254033:  ::: completed emerge (9 of 31) dev-libs/atk-1.28.0 to /
1268254045:  ::: completed emerge (10 of 31) x11-misc/shared-mime-info-0.70 to /
1268254103:  ::: completed emerge (11 of 31) dev-cpp/glibmm-2.22.1 to /
1268254394:  ::: completed emerge (12 of 31) x11-libs/gtk+-2.18.6 to /
1268254419:  ::: completed emerge (13 of 31) dev-cpp/pangomm-2.26.0 to /
1268254443:  ::: completed emerge (14 of 31) x11-libs/libsexy-0.1.11-r1 to /
1268254630:  ::: completed emerge (15 of 31) dev-cpp/gtkmm-2.18.2 to /
1268254657:  ::: completed emerge (16 of 31) net-libs/libsoup-2.28.2 to /
1268254681:  ::: completed emerge (17 of 31) net-libs/libsoup-gnome-2.28.2 to /
1268255802:  ::: completed emerge (18 of 31) net-libs/webkit-gtk-1.1.15.4 to /
1268256163:  ::: completed emerge (19 of 31) x11-libs/qt-core-4.6.2-r1 to /
1268256212:  ::: completed emerge (20 of 31) x11-libs/qt-dbus-4.6.2 to /
1268256255:  ::: completed emerge (21 of 31) x11-libs/qt-sql-4.6.2 to /
1268256376:  ::: completed emerge (22 of 31) x11-libs/qt-script-4.6.2 to /
1268256401:  ::: completed emerge (23 of 31) x11-libs/qt-test-4.6.2 to /
1268256604:  ::: completed emerge (24 of 31) x11-libs/qt-xmlpatterns-4.6.2 to /
1268257310:  ::: completed emerge (25 of 31) x11-libs/qt-gui-4.6.2 to /
1268257510:  ::: completed emerge (26 of 31) x11-libs/qt-qt3support-4.6.2 to /
1268257567:  ::: completed emerge (27 of 31) x11-libs/qt-opengl-4.6.2 to /
1268257609:  ::: completed emerge (28 of 31) x11-libs/qt-svg-4.6.2 to /
1268257624:  ::: completed emerge (29 of 31) media-sound/musepack-tools-444-r1 to /
1268258874:  ::: completed emerge (30 of 31) x11-libs/qt-webkit-4.6.2 to /
1268259281:  ::: completed emerge (31 of 31) dev-python/PyQt4-4.7 to /

emerge war noch nicht vollständig fertig (?hatte glaub nicht mal die hälfte) da hatte ich schon probleme mit den vmware-server-console fenster, das ich aber nun gelöst habe -> https://forums.gentoo.org/viewtopic-t-818884.html

die frage "wie kann ich hinterher sehen welche paketversionen ich vor dem update im system hatte ?" ist immer noch da

vielleicht nur zufall das jetzt kurz danach ich probleme mit dem programm konsole habe, davor lief das system 10 tage (am stück) ohne das durch das wiederhochholen von konsole sich der xorg neugestartet hat


Last edited by pieter_parker on Fri Apr 02, 2010 4:02 am; edited 3 times in total
Back to top
View user's profile Send private message
Josef.95
Advocate
Advocate


Joined: 03 Sep 2007
Posts: 3655
Location: Germany

PostPosted: Fri Mar 12, 2010 3:48 pm    Post subject: Reply with quote

Ein Schuss ins blaue...
bei deinem Update war ja anscheinend auch ein Upgrade von den ganzen x11-libs/qt-* Modulen dabei,
hast du danach schon mal zumindest die kdelibs neugebaut?

................................................................................
BTW
die beiden Zeilen
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"

solltest du auch mal aus der xorg.conf entfernen, denn du nutzt doch scheinbar HAL für die Eingabegeräte.
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Fri Mar 12, 2010 3:59 pm    Post subject: Reply with quote

hatte ich nicht gemacht, hab nun emerge -av1 kdelibs gemacht

ja, benutze hal und die beiden zeilen müssen noch raus aus der xorg.conf
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Sun Mar 21, 2010 6:52 pm    Post subject: Reply with quote

eben hat sich beim wiederhochholen von konsole das kde und der xorg neugestartet
alle daten an den denen ich am schreiben war und die nicht abgespeichert waren sind weg, mal wieder
es lässt sich unmöglich so damit arbeiten

was muss ich tun damit konsole beim wiederhochholen aus der taskleiste nicht xorg und kde neustartet ?!?!
Back to top
View user's profile Send private message
franzf
Advocate
Advocate


Joined: 29 Mar 2005
Posts: 4408

PostPosted: Sun Mar 21, 2010 7:06 pm    Post subject: Reply with quote

Ich weiß nicht, aber das ist alles so mysteriös, dass ich fast von nem Hardwaredefekt ausgeh...
Oder es ist eine zerschossene Installation, wo noch alte Files rumliegen die jetzt in die Quere kommen.
Hast du irgendwo eine Festplatte, auf der du eine Neuinstallation versuchen könntest?
Denn so ein Verhalten hatte ich bisher noch nicht.
Dass das Hochholen eines Programms aus der Taskleiste den X killt...

// edit:
Wie viel Ram hast du?
Kannst du da Riegel rausnehmen oder austauschen?
Liegt Konsole da sehr lange im Tray? Kann es sein, dass die aus der SWAP-Partition geladen wird?
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Sun Mar 21, 2010 7:45 pm    Post subject: Reply with quote

naja der pc hat 4 gb ram, ich habe keine swap datei
das system ist keine 4 wochen alt, hatte das gleiche problem aber davor auf der gleichen hardware auch gehabt
damals hatte ich von kde3 nach kde4 geupdatet, und dachte vielleicht das sei der grund gewesen
ich hab immer zwischen 8 und 16 tabs offen in konsole
ist verschieden wie oft und wie lange konsole minimiert in der taskleiste liegt
aber das konsole beim hochholen den x killt darf einfach nicht sein - wie soll man so gescheit das sys nutzen können
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Mon Mar 22, 2010 9:38 am    Post subject: Reply with quote

Ist zwar blöde bei deinem Speicher, aber leg doch mal etwas Swap an. Und lass memtest laufen. Für mich klingt das auch wie ein Speicherproblem. Hast doch bestimmt 2 Riegel auf dem Board. Also mal einen raus nehmen und schauen, was passiert.
Back to top
View user's profile Send private message
franzf
Advocate
Advocate


Joined: 29 Mar 2005
Posts: 4408

PostPosted: Mon Mar 22, 2010 9:48 am    Post subject: Reply with quote

Code:
20 Feb 2010; Samuli Suominen <ssuominen@gentoo.org> kdelibs-4.3.5.ebuild:
  amd64/x86 stable wrt #300393

Ist aus dem kdelibs-ChangeLog.
Das sind 4 Wochen, und seitdem hat er den Rechner. Ich nehme an dass er direkt kde-4.3.5 installiert hat drum hat sich an den Settings noch nix geändert.

// edit:
Mist, hast den Teil mit dem neuen User rauseditiert. Schande! :D
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Mon Mar 22, 2010 10:43 am    Post subject: Reply with quote

franzf wrote:
// edit:
Mist, hast den Teil mit dem neuen User rauseditiert. Schande! :D
Jo, die Idee hatte ich am Anfang, hab dann aber gesehen, dass das KDE erst vier Wochen alt ist...

Ich hab bei mir manchmal das Problem, dass Anwendungen, die sehr lange in der Taskleiste schlummern, da nur sehr schwer wieder rauskommen. Also man muss da dreimal draufklicken und es dauert ewig. Konnte das aber bislang noch nicht so richtig einkreisen, um daraus eine richtige Meldung zu machen. Könnte vielleicht in die gleiche Richtung gehen.
Back to top
View user's profile Send private message
mrsteven
Veteran
Veteran


Joined: 04 Jul 2003
Posts: 1938

PostPosted: Mon Mar 22, 2010 1:24 pm    Post subject: Reply with quote

Das hier schon probiert: :arrow: https://forums.gentoo.org/viewtopic-p-6185132.html#6185132 :?:
_________________
Unix philosophy: "Do one thing and do it well."
systemd: "Do everything and do it wrong."
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Thu Mar 25, 2010 12:02 am    Post subject: Reply with quote

nein, noch nicht
das war damals auch noch zu den alten zeiten wo ich das kde3 nach kde4 auf dem system geupdatet hatte
das system jetzt ist eine direkte kde4 installation
ich lese zwar immer alles durch und mache es auch was emerge nach dem bauen zu schreibt
aber gibt es wo listen welche pakete man generel nach einem update von bestimmten anderen paketen neubauen _muss_ ?
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Thu Mar 25, 2010 8:21 am    Post subject: Reply with quote

pieter_parker wrote:
aber gibt es wo listen welche pakete man generel nach einem update von bestimmten anderen paketen neubauen _muss_ ?
Normalerweise stehen die in den Elogs. Ansonsten war da mal was (obs immer noch so ist weiß ich nicht, weil ich es schon lange nicht mehr hatte), dass qt und die kdelibs mit dem gleichen gcc und den gleichen CFLAGS übersetzt werden müssen.
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Sat Mar 27, 2010 6:29 pm    Post subject: Reply with quote

unter windows in videospielen hab ich nie probleme mit abstuerzen oder aehnlichen, darum schliese ich den ram schon so gut wie aus
hab sogut wie immer alles gemacht was die elogs vorgeschlagen haben
um es einfach auszuschliessen
welche pakete in welcher reinfolge sollte ich neubauen ?
kdelibs
xorg-server
pixman
alles was qlist -I -C x11-drivers/ ausgibt
nvidia-drivers
welche qt sachen sollte ich neubauen ?
alle die "eix x11-libs/qt-*" ausgibt ?
was noch ? und in welcher reinfolge sollte ich diese pakete neubauen ?
starte ich den rechner neu, laeuft das system auch bis zu 5..6 tage ohne diese x restarts problemlos, es tritt immer erst nach einigen tagen auf - das ist irgendwie seltsam

welche alternativen programme gibt es zu "konsole" ?
Back to top
View user's profile Send private message
Max Steel
Advocate
Advocate


Joined: 12 Feb 2007
Posts: 2048
Location: My own world! I and Gentoo!

PostPosted: Sat Mar 27, 2010 11:37 pm    Post subject: Reply with quote

pieter_parker wrote:
welche alternativen programme gibt es zu "konsole" ?


Da wären
  • xterm
  • tty?
  • lxterminal
  • wterm
  • eterm
  • tilda
  • xvt
  • gnome-terminal
  • terminal
  • ...


Noch fragen?
_________________
mfg
Steel
___________________
Sorry for my bad English.

Heim-PC: Intel i7-5820K, 32GB RAM, GTX 1080
Laptop: Intel Core i5-4300U, 16GB RAM, Intel Graphic
Arbeit-PC: Intel i5-3470S, 16GB RAM, Intel Graphic
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Sun Mar 28, 2010 10:15 am    Post subject: Reply with quote

ja, ich hatte vergessen zu sagen das das programm tabs können soll
Back to top
View user's profile Send private message
franzf
Advocate
Advocate


Joined: 29 Mar 2005
Posts: 4408

PostPosted: Sun Mar 28, 2010 10:26 am    Post subject: Reply with quote

terminal kann das.
Das gnome-terminal auch.
Alternative: Auf kde-4.4 aktualisieren und die xterm-Fenster gruppieren ("Kwin window tabbing").
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Sun Mar 28, 2010 10:57 am    Post subject: Reply with quote

ich glaub mit dem gnmome-terminal kann ich auch glücklich werden
bis auf eine sache, wie bekomme ich die anzeige der reiter der anderen tabs nach unten, oben stören die
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Tue Mar 30, 2010 11:15 am    Post subject: Reply with quote

wie bekomme ich die anzeige mit den reitern nach unten ?
Back to top
View user's profile Send private message
franzf
Advocate
Advocate


Joined: 29 Mar 2005
Posts: 4408

PostPosted: Tue Mar 30, 2010 1:56 pm    Post subject: Reply with quote

pieter_parker wrote:
wie bekomme ich die anzeige mit den reitern nach unten ?

In der Zeit, die du hier auf ne Antwort wartest, kannst du alle Menüs durchsehen und sämtliche Config-Optionen durchgrasen. Wenn du nichts findest wird es wohl auch schwer das umzustellen. Auf einen Tip, irgend was manuell in Configfiles zu editieren würde ich in diesem Fall nicht hoffen.
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Tue Mar 30, 2010 8:17 pm    Post subject: Reply with quote

das gnome-terminal bringt auch keine verbesserung
eben wollte ich eins der beiden abgelegten gnome-terminal programm aus der taskleiste wieder hochholen, da hat sich das grafische wiedereinmal neugestartet
woran liegt das ?!?!?
es ist unmöglich so zuarbeiten wenn ständig alle ungespeicherten sachen weg sind




/var/log/Xorg.0.log.old
Code:
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-gentoo-r10 i686
Current Operating System: Linux desktop 2.6.31-gentoo-r10 #9 SMP Fri Mar 19 11:54:27 CET 2010 i686
Build Date: 26 February 2010  02:13:17AM
 
   Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 27 19:09:29 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Device0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/misc/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/100dpi/" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/share/fonts/75dpi/" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(II) Loader magic: 0x3aa0
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 5.0
   X.Org XInput driver : 4.0
   X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 10de:0402:1043:8243 nVidia Corporation G84 [GeForce 8600 GT] rev 161, Mem @ 0xe6000000/16777216, 0xd0000000/268435456, 0xe4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Server Extension
(II) NVIDIA GLX Module  190.42  Tue Oct 20 20:55:08 PDT 2009
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.13.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(WW) Warning, couldn't open module dri
(II) UnloadModule: "dri"
(EE) Failed to load module "dri" (module does not exist, 0)
(II) LoadModule: "dri2"
(WW) Warning, couldn't open module dri2
(II) UnloadModule: "dri2"
(EE) Failed to load module "dri2" (module does not exist, 0)
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
   compiled for 4.0.2, module version = 1.0.0
   Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver  190.42  Tue Oct 20 20:26:00 PDT 2009
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) Mar 27 19:09:29 NVIDIA(0): Enabling RENDER acceleration
(II) Mar 27 19:09:29 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) Mar 27 19:09:29 NVIDIA(0):     enabled.
(II) Mar 27 19:09:30 NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
(--) Mar 27 19:09:30 NVIDIA(0): Memory: 524288 kBytes
(--) Mar 27 19:09:30 NVIDIA(0): VideoBIOS: 60.84.41.00.00
(II) Mar 27 19:09:30 NVIDIA(0): Detected PCI Express Link width: 16X
(--) Mar 27 19:09:30 NVIDIA(0): Interlaced video modes are supported on this GPU
(--) Mar 27 19:09:30 NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0:
(--) Mar 27 19:09:30 NVIDIA(0):     HP LP3065 (DFP-0)
(--) Mar 27 19:09:30 NVIDIA(0): HP LP3065 (DFP-0): 330.0 MHz maximum pixel clock
(--) Mar 27 19:09:30 NVIDIA(0): HP LP3065 (DFP-0): Internal Dual Link TMDS
(II) Mar 27 19:09:30 NVIDIA(0): Assigned Display Device: DFP-0
(==) Mar 27 19:09:30 NVIDIA(0):
(==) Mar 27 19:09:30 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
(==) Mar 27 19:09:30 NVIDIA(0):     will be used as the requested mode.
(==) Mar 27 19:09:30 NVIDIA(0):
(II) Mar 27 19:09:30 NVIDIA(0): Validated modes:
(II) Mar 27 19:09:30 NVIDIA(0):     "nvidia-auto-select"
(II) Mar 27 19:09:30 NVIDIA(0): Virtual screen size determined to be 2560 x 1600
(--) Mar 27 19:09:30 NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
(--) Mar 27 19:09:30 NVIDIA(0):     option
(==) Mar 27 19:09:30 NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   [0] -1   0   0xffffffff - 0xffffffff (0x1) MX[B]
   [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX[B]
   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX[B]
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX[B]
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX[B]
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX[B]
(II) Mar 27 19:09:30 NVIDIA(0): Initialized GPU GART.
(II) Mar 27 19:09:30 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Mar 27 19:09:30 NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) Mar 27 19:09:30 NVIDIA(0):     configuration option may not be set correctly.  When the
(II) Mar 27 19:09:30 NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) Mar 27 19:09:30 NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) Mar 27 19:09:30 NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) Mar 27 19:09:30 NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) Mar 27 19:09:30 NVIDIA(0):     Config Options in the README.
(II) Mar 27 19:09:30 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Loading extension NV-GLX
(II) Mar 27 19:09:30 NVIDIA(0): Initialized OpenGL Acceleration
(==) NVIDIA(0): Disabling shared memory pixmaps
(II) Mar 27 19:09:30 NVIDIA(0): Initialized X Rendering Acceleration
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(II) Loading extension XINERAMA
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing extension GLX
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
   compiled for 1.6.5, module version = 2.3.2
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Wired Keyboard 600
(**) Microsoft Wired Keyboard 600: always reports core events
(**) Microsoft Wired Keyboard 600: Device: "/dev/input/event5"
(II) Microsoft Wired Keyboard 600: Found 1 mouse buttons
(II) Microsoft Wired Keyboard 600: Found scroll wheel(s)
(II) Microsoft Wired Keyboard 600: Found relative axes
(II) Microsoft Wired Keyboard 600: Found absolute axes
(II) Microsoft Wired Keyboard 600: Found x and y absolute axes
(II) Microsoft Wired Keyboard 600: Found keys
(II) Microsoft Wired Keyboard 600: Configuring as mouse
(II) Microsoft Wired Keyboard 600: Configuring as keyboard
(**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
(**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
(**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
(**) Microsoft Wired Keyboard 600: (accel) filter chain progression: 2.00
(**) Microsoft Wired Keyboard 600: (accel) filter stage 0: 20.00 ms
(**) Microsoft Wired Keyboard 600: (accel) set acceleration profile 0
(II) Microsoft Wired Keyboard 600: initialized for absolute axes.
(II) config/hal: Adding input device Microsoft Wired Keyboard 600
(**) Microsoft Wired Keyboard 600: always reports core events
(**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
(II) Microsoft Wired Keyboard 600: Found keys
(II) Microsoft Wired Keyboard 600: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Microsoft Microsoft IntelliMouse® Explorer
(**) Microsoft Microsoft IntelliMouse® Explorer: always reports core events
(**) Microsoft Microsoft IntelliMouse® Explorer: Device: "/dev/input/event3"
(II) Microsoft Microsoft IntelliMouse® Explorer: Found 9 mouse buttons
(II) Microsoft Microsoft IntelliMouse® Explorer: Found scroll wheel(s)
(II) Microsoft Microsoft IntelliMouse® Explorer: Found relative axes
(II) Microsoft Microsoft IntelliMouse® Explorer: Found x and y relative axes
(II) Microsoft Microsoft IntelliMouse® Explorer: Configuring as mouse
(**) Microsoft Microsoft IntelliMouse® Explorer: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft IntelliMouse® Explorer: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft IntelliMouse® Explorer" (type: MOUSE)
(**) Microsoft Microsoft IntelliMouse® Explorer: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft IntelliMouse® Explorer: (accel) filter chain progression: 2.00
(**) Microsoft Microsoft IntelliMouse® Explorer: (accel) filter stage 0: 20.00 ms
(**) Microsoft Microsoft IntelliMouse® Explorer: (accel) set acceleration profile 0
(II) Microsoft Microsoft IntelliMouse® Explorer: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Mar 30 15:05:04 NVIDIA(0): Setting mode "nvidia-auto-select"
(II) Mar 30 15:05:04 NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
(II) Mar 30 15:05:04 NVIDIA(0):     may not be running or the "AcpidSocketPath" X
(II) Mar 30 15:05:04 NVIDIA(0):     configuration option may not be set correctly.  When the
(II) Mar 30 15:05:04 NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
(II) Mar 30 15:05:04 NVIDIA(0):     try to use it to receive ACPI event notifications.  For
(II) Mar 30 15:05:04 NVIDIA(0):     details, please see the "ConnectToAcpid" and
(II) Mar 30 15:05:04 NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
(II) Mar 30 15:05:04 NVIDIA(0):     Config Options in the README.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Microsoft Wired Keyboard 600: Device reopened after 1 attempts.
(II) Microsoft Wired Keyboard 600: Device reopened after 1 attempts.
(II) Microsoft Microsoft IntelliMouse® Explorer: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.

Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x812f37b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80c6a71]
2: [0xb7750400]
3: /usr/lib/libpixman-1.so.0 [0xb76accf5]
4: /usr/lib/libpixman-1.so.0 [0xb767d2e9]
5: /usr/lib/libpixman-1.so.0 [0xb76a3fd0]
6: /usr/lib/libpixman-1.so.0 [0xb76ad3ba]
7: /usr/lib/libpixman-1.so.0 [0xb76ae1b7]
8: /usr/lib/libpixman-1.so.0 [0xb76a3c9b]
9: /usr/lib/libpixman-1.so.0 [0xb767dfe3]
10: /usr/lib/libpixman-1.so.0 [0xb76a5ef5]
11: /usr/lib/libpixman-1.so.0 [0xb767dfe3]
12: /usr/lib/libpixman-1.so.0 [0xb76b2333]
13: /usr/lib/libpixman-1.so.0 [0xb767dfe3]
14: /usr/lib/libpixman-1.so.0 [0xb76b96bb]
15: /usr/lib/libpixman-1.so.0 [0xb767dfe3]
16: /usr/lib/libpixman-1.so.0(pixman_image_composite+0x16c) [0xb76a4c2c]
17: /usr/lib/xorg/modules//libwfb.so(wfbComposite+0x1b2) [0xb5b1e442]
18: /usr/lib/xorg/modules/drivers//nvidia_drv.so [0xb5e50c47]

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support
    at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) Microsoft Wired Keyboard 600: Close
(II) UnloadModule: "evdev"
(II) Microsoft Wired Keyboard 600: Close
(II) UnloadModule: "evdev"
(II) Microsoft Microsoft IntelliMouse® Explorer: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev





die letzten zeilen aus dmesg
Code:
[953248.817137] usb 1-6.1.1: unlink qh8-0601/f6cf5480 start 5 [1/2 us]
[957265.757018] ehci_hcd 0000:00:1a.7: reused qh f6cf5480 schedule
[957265.757022] usb 1-6.1.1: link qh8-0601/f6cf5480 start 5 [1/2 us]
[982445.439141] usb 1-6.1.1: unlink qh8-0601/f6cf5480 start 5 [1/2 us]
[982447.957019] ehci_hcd 0000:00:1a.7: reused qh f6cf5480 schedule
[982447.957024] usb 1-6.1.1: link qh8-0601/f6cf5480 start 5 [1/2 us]

was hat das mit diesen usb meldungen aufsich ?
die kommen auch wenn ich im grafischen bin und strg+f1 z.b. drücke, und sie kommen wieder wenn ich dann strg+f7 drücke
was bedeuten sie ?




/var/log/messages
Code:
Mar 30 22:04:44 desktop su[11005]: pam_unix(su:session): session closed for use
Mar 30 22:04:44 desktop su[11084]: pam_unix(su:session): session closed for user root
Mar 30 22:04:44 desktop su[10974]: pam_unix(su:session): session closed for user root
Mar 30 22:04:45 desktop kdm[24163]: X server for display :0 terminated unexpectedly
Mar 30 22:04:45 desktop su[11470]: pam_unix(su:session): session closed for user root
Mar 30 22:04:45 desktop kdm: :0[9010]: pam_unix(kde:session): session closed for user pieter
Mar 30 22:04:45 desktop su[10947]: pam_unix(su:session): session closed for user root
Mar 30 22:04:45 desktop su[11567]: pam_unix(su:session): session closed for user root
Mar 30 22:04:45 desktop su[11616]: pam_unix(su:session): session closed for user root
Mar 30 22:04:45 desktop su[12706]: pam_unix(su:session): session closed for user root
Mar 30 22:04:45 desktop su[11533]: pam_unix(su:session): session closed for user root
Mar 30 22:04:45 desktop su[11491]: pam_unix(su:session): session closed for user root
Mar 30 22:04:46 desktop kernel: [982447.957019] ehci_hcd 0000:00:1a.7: reused qh f6cf5480 schedule
Mar 30 22:04:46 desktop kernel: [982447.957024] usb 1-6.1.1: link qh8-0601/f6cf5480 start 5 [1/2 us]
Mar 30 22:04:55 desktop kdm: :0[16488]: pam_unix(kde:session): session opened for user pieter by (uid=0)


aus der xorg.conf hab ich die beiden einträge entfernt
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"

pixman und xorg hab ich schon neugebaut gehabt

welche pakete in welcher reinfolge sollte ich neubauen ?
Back to top
View user's profile Send private message
franzf
Advocate
Advocate


Joined: 29 Mar 2005
Posts: 4408

PostPosted: Tue Mar 30, 2010 8:43 pm    Post subject: Reply with quote

Ich hab dich schon mal vor Ewigkeiten gefragt, welchen font du in deinem Terminal gesetzt hast.
Ist das ein Pixmap-Font? Oder ein Skalierbarer?
Setz mal dejavu sans mono (media-fonts/dejavu), oder libertine mono (media-fonts/libertine-ttf), ob das dann besser wird.

Hintergrund: Es gibt scheinbar manchmal Probleme mit Pixmap-Fonts im Terminal.
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Tue Mar 30, 2010 9:04 pm    Post subject: Reply with quote

tut mir leid, ich muss es überlesen haben (kann mich auch nicht dran errinern)

im "konsole" von kde steht es auf "monospace" , "normal" , und "10"

im gnome-terminal steht es auf
die dicktengleiche systemschrift verwenden
schrift: monospace 12"
fetten text erlauben
menuleiste in neuen terminals per vorgabe anzeigen
terminalglocke
form der eingabe: block
zeichen für wortweise auswahl: -A-Za-z0-9,./?%&#:_=+@~

weiss nicht ob es was zubedeuten hat, aber wenn ich aus dem gnome-terminal herraus "konsole" aufrufe sehe ich
Undecodable sequence: \001b(hex)[?1034h
stehen, aber "konsole" kommt... hat das was zubedeuten ?


ich hab es in "konsole" nun auf dejavu sans mono eingestellt und benutze nun auch wieder "konsole"
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Tue Mar 30, 2010 9:15 pm    Post subject: Reply with quote

die umstellung auf dejavu sans mono hat nichts gebracht, eben hat sich das grafische wieder neugestartet
Back to top
View user's profile Send private message
franzf
Advocate
Advocate


Joined: 29 Mar 2005
Posts: 4408

PostPosted: Tue Mar 30, 2010 9:20 pm    Post subject: Reply with quote

pieter_parker wrote:
die umstellung auf dejavu sans mono hat nichts gebracht, eben hat sich das grafische wieder neugestartet

Hmmm.
Nimm doch mal ein anderes Environment. Fluxbox, lxde, etc sind gute Alternativen, wenn du nicht zu Gnome oder XFCE greifen willst.
Bist du immer noch bei kde-4.3.5? Heute wurde 4.4.2 released, dröppelt schon so langsam ins Portage. Ein Update schadet sicher nicht. Ich fand 4.4.1 schon stabiler als 4.3.5...
Wenn es denn am kde liegt.
Back to top
View user's profile Send private message
pieter_parker
Veteran
Veteran


Joined: 07 Aug 2006
Posts: 1488
Location: 127.0.0.1

PostPosted: Tue Mar 30, 2010 9:29 pm    Post subject: Reply with quote

ja ich hab noch das 4.3.5 in benutzung
bei "konsole" bei den profil einstellung gibt es eine option mit "kantenglättung für schriftarten" die ist jetzt nicht mehr, keine ahnung ob das was bringt oder nicht
wie schon vorgeschlagen, werd ich es auch noch mit nur einem ram riegel versuchen (wobei wenn ich windows boot und videogames laufen lassen gab es nie abstürze, naja...)

was mir grad noch einfföllt
manchmal, egal ob bei "konsole" oder dem gnome-terminal, kam es vor das es ca 0,5 sek gedauert hat bis nach dem clicken das programm aus der taskleiste hochkam, weiss nicht ob das was zu bedeuten hat oder ob das normal ist....


Last edited by pieter_parker on Tue Mar 30, 2010 10:21 pm; edited 2 times in total
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Goto page 1, 2, 3, 4  Next
Page 1 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum