Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Solved] Xorg + Intel ICH9 will nicht
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
curator
Apprentice
Apprentice


Joined: 10 Apr 2007
Posts: 193

PostPosted: Fri Apr 08, 2011 6:13 pm    Post subject: [Solved] Xorg + Intel ICH9 will nicht Reply with quote

Hallo,

habe mir eben seit längerem die neue Gentoo Variante installiert (frisch vom Server, kernel 2.6.36-r8)
Habe genkernel genutzt, am kernel sollte mein Problem aber nicht liegen.

Ich habe xorg-server installiert

Code:

emerge xorg-server


und vorher in der make.conf
Code:

VIDEO_CARDS="intel"


eingetragen.

Nun wollte ich mal (ohne xorg.conf, wie ich nachgelesen habe) einfach mal versucht X zu starten. Dat geht net
Da auf anderem Rechner zitiere ich nur auszuüge aus dem Log
Code:

(II) LoadModule: "intel"
....
(EE) Failed to load module "vesa"
..
(EE) Failed to load module "fbdev"
...
(EE) No devices detected.
Fatal server error:
no screens found
...

So, intel lädt also, die anderen nicht, aber die brauche ich imho ja auch nicht, oder?
Ach ja auszug aus lspci
Code:

00:02:0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)


Was mache ich falsch? Bzw. was muss ich tun, damit das geht?

Besten Gruß,
Alex


Last edited by curator on Wed Apr 13, 2011 5:15 pm; edited 1 time in total
Back to top
View user's profile Send private message
MarcenX
n00b
n00b


Joined: 30 Mar 2005
Posts: 46

PostPosted: Fri Apr 08, 2011 9:33 pm    Post subject: Reply with quote

Hast du auch xorg-drivers instaliert?
Hast du unter /etc/X11 eine xorg.conf angelegt? Wenn ja versuch es mal ohne.
Die ganze Log von xorg wäre schon besser.
Mit wgetpaste
mehr unter https://forums.gentoo.org/viewtopic-t-870739.html
Back to top
View user's profile Send private message
curator
Apprentice
Apprentice


Joined: 10 Apr 2007
Posts: 193

PostPosted: Sat Apr 09, 2011 7:23 am    Post subject: Reply with quote

Hallo,

xorg-drivers in version 1.9 installiert.

Und es exisitert keine xorg.conf

Hier die vollständige Xorg.0.log
Code:

[   441.805]
X.Org X Server 1.9.4
Release Date: 2011-02-04
[   441.808] X Protocol Version 11, Revision 0
[   441.808] Build Operating System: Linux 2.6.36-gentoo-r8 x86_64 Gentoo
[   441.808] Current Operating System: Linux X200_Gentoo 2.6.36-gentoo-r8 #1 SMP Thu Apr 7 16:20:49 CEST 2011 x86_64
[   441.808] Kernel command line: root=/dev/ram0 real_root=/dev/sda3
[   441.809] Build Date: 08 April 2011  10:35:46PM
[   441.809] 
[   441.809] Current version of pixman: 0.20.2
[   441.809]    Before reporting problems, check http://wiki.x.org
   to make sure that you have the latest version.
[   441.809] Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   441.811] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr  9 11:01:21 2011
[   441.857] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   441.873] (==) No Layout section.  Using the first Screen section.
[   441.873] (==) No screen section available. Using defaults.
[   441.873] (**) |-->Screen "Default Screen Section" (0)
[   441.873] (**) |   |-->Monitor "<default monitor>"
[   441.873] (==) No monitor specified for screen "Default Screen Section".
   Using a default monitor configuration.
[   441.873] (==) Automatically adding devices
[   441.873] (==) Automatically enabling devices
[   441.898] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[   441.898]    Entry deleted from font path.
[   441.898] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   441.898]    Entry deleted from font path.
[   441.898] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   441.898]    Entry deleted from font path.
[   441.898] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   441.898]    Entry deleted from font path.
[   441.898] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[   441.898]    Entry deleted from font path.
[   441.899] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[   441.899]    Entry deleted from font path.
[   441.899] (==) FontPath set to:
   
[   441.899] (==) ModulePath set to "/usr/lib64/xorg/modules"
[   441.899] (II) The server relies on udev to provide the list of input devices.
   If no devices become available, reconfigure udev or disable AutoAddDevices.
[   441.899] (II) Loader magic: 0x7cc140
[   441.899] (II) Module ABI versions:
[   441.899]    X.Org ANSI C Emulation: 0.4
[   441.899]    X.Org Video Driver: 8.0
[   441.899]    X.Org XInput driver : 11.0
[   441.899]    X.Org Server Extension : 4.0
[   441.901] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 rev 7, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[   441.901] (--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 rev 7, Mem @ 0xf2400000/1048576
[   441.901] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   441.901] (II) LoadModule: "extmod"
[   441.958] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[   441.970] (II) Module extmod: vendor="X.Org Foundation"
[   441.970]    compiled for 1.9.4, module version = 1.0.0
[   441.970]    Module class: X.Org Server Extension
[   441.970]    ABI class: X.Org Server Extension, version 4.0
[   441.970] (II) Loading extension MIT-SCREEN-SAVER
[   441.970] (II) Loading extension XFree86-VidModeExtension
[   441.971] (II) Loading extension XFree86-DGA
[   441.971] (II) Loading extension DPMS
[   441.971] (II) Loading extension XVideo
[   441.971] (II) Loading extension XVideo-MotionCompensation
[   441.971] (II) Loading extension X-Resource
[   441.971] (II) LoadModule: "dbe"
[   441.971] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[   441.996] (II) Module dbe: vendor="X.Org Foundation"
[   441.996]    compiled for 1.9.4, module version = 1.0.0
[   441.996]    Module class: X.Org Server Extension
[   441.996]    ABI class: X.Org Server Extension, version 4.0
[   441.996] (II) Loading extension DOUBLE-BUFFER
[   441.996] (II) LoadModule: "glx"
[   442.012] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[   442.045] (II) Module glx: vendor="X.Org Foundation"
[   442.045]    compiled for 1.9.4, module version = 1.0.0
[   442.045]    ABI class: X.Org Server Extension, version 4.0
[   442.045] (==) AIGLX enabled
[   442.045] (II) Loading extension GLX
[   442.046] (II) LoadModule: "record"
[   442.047] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[   442.052] (II) Module record: vendor="X.Org Foundation"
[   442.052]    compiled for 1.9.4, module version = 1.13.0
[   442.052]    Module class: X.Org Server Extension
[   442.052]    ABI class: X.Org Server Extension, version 4.0
[   442.052] (II) Loading extension RECORD
[   442.053] (II) LoadModule: "dri"
[   442.053] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[   442.083] (II) Module dri: vendor="X.Org Foundation"
[   442.083]    compiled for 1.9.4, module version = 1.0.0
[   442.083]    ABI class: X.Org Server Extension, version 4.0
[   442.083] (II) Loading extension XFree86-DRI
[   442.083] (II) LoadModule: "dri2"
[   442.084] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[   442.084] (II) Module dri2: vendor="X.Org Foundation"
[   442.084]    compiled for 1.9.4, module version = 1.2.0
[   442.084]    ABI class: X.Org Server Extension, version 4.0
[   442.084] (II) Loading extension DRI2
[   442.085] (==) Matched intel as autoconfigured driver 0
[   442.085] (==) Matched vesa as autoconfigured driver 1
[   442.085] (==) Matched fbdev as autoconfigured driver 2
[   442.085] (==) Assigned the driver to the xf86ConfigLayout
[   442.085] (II) LoadModule: "intel"
[   442.085] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[   442.121] (II) Module intel: vendor="X.Org Foundation"
[   442.121]    compiled for 1.9.4, module version = 2.14.0
[   442.121]    Module class: X.Org Video Driver
[   442.121]    ABI class: X.Org Video Driver, version 8.0
[   442.121] (II) LoadModule: "vesa"
[   442.122] (WW) Warning, couldn't open module vesa
[   442.122] (II) UnloadModule: "vesa"
[   442.122] (EE) Failed to load module "vesa" (module does not exist, 0)
[   442.122] (II) LoadModule: "fbdev"
[   442.123] (WW) Warning, couldn't open module fbdev
[   442.123] (II) UnloadModule: "fbdev"
[   442.123] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   442.123] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
   965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
   4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
   Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
   Sandybridge, Sandybridge
[   442.124] (--) using VT number 7

[   442.505] (EE) No devices detected.
[   442.505]
Fatal server error:
[   442.505] no screens found
[   442.505]
Please consult the The X.Org Foundation support
    at http://wiki.x.org
 for help.
[   442.505] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   442.505]
Back to top
View user's profile Send private message
astaecker
Guru
Guru


Joined: 28 Apr 2003
Posts: 403
Location: Hamburg / Germany

PostPosted: Sat Apr 09, 2011 8:51 am    Post subject: Reply with quote

Werden die DRM-Treiber auch richtig geladen ?:
Code:
dmesg | grep i915
Back to top
View user's profile Send private message
curator
Apprentice
Apprentice


Joined: 10 Apr 2007
Posts: 193

PostPosted: Sat Apr 09, 2011 9:06 am    Post subject: Reply with quote

Hallo und danke für die schnelle Antwort.

Code:

dmesg | grep i915

liefert KEINE ergebnisse

Wenn ich das Teil separat lade
Code:

dmesg -c
modprobe i915

Dann passiert was
Code:

dmesg
[drm] Initialized drm 1.1.0 20060810


Der Rest bleibt leider unverändert, X startet nicht nicht identischer Xorg.0.log

Weitere Ideen?
Back to top
View user's profile Send private message
Hollowman
Guru
Guru


Joined: 19 Apr 2007
Posts: 584

PostPosted: Sat Apr 09, 2011 9:25 am    Post subject: Reply with quote

Starte die Kiste mal neu und mach mal ein

lspci -k

Sebastian
Back to top
View user's profile Send private message
curator
Apprentice
Apprentice


Joined: 10 Apr 2007
Posts: 193

PostPosted: Sat Apr 09, 2011 9:32 am    Post subject: Reply with quote

Mach ich doch gern!

Code:

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
   Subsystem: Lenovo Device 20e0
   Kernel driver in use: agpgart-intel
   Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
   Subsystem: Lenovo Device 20e4
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
   Subsystem: Lenovo Device 20e4
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
   Subsystem: Lenovo Device 20e6
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
   Subsystem: Lenovo Device 20ec
   Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
   Subsystem: Lenovo Device 20ee
   Kernel driver in use: e1000e
   Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
   Subsystem: Lenovo Device 20f0
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
   Subsystem: Lenovo Device 20f0
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
   Subsystem: Lenovo Device 20f0
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
   Subsystem: Lenovo Device 20f1
   Kernel driver in use: ehci_hcd
   Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
   Subsystem: Lenovo Device 20f2
   Kernel driver in use: HDA Intel
   Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
   Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
   Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
   Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
   Subsystem: Lenovo Device 20f0
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
   Subsystem: Lenovo Device 20f0
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
   Subsystem: Lenovo Device 20f0
   Kernel driver in use: uhci_hcd
   Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
   Subsystem: Lenovo Device 20f1
   Kernel driver in use: ehci_hcd
   Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
   Subsystem: Lenovo Device 20f5
00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03)
   Subsystem: Lenovo Device 20f7
   Kernel driver in use: ata_piix
   Kernel modules: pata_acpi, ata_piix
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
   Subsystem: Lenovo Device 20f9
   Kernel driver in use: i801_smbus
   Kernel modules: i2c-i801
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5300
   Subsystem: Intel Corporation Device 1011
Back to top
View user's profile Send private message
Josef.95
Advocate
Advocate


Joined: 03 Sep 2007
Posts: 3720
Location: Germany

PostPosted: Sat Apr 09, 2011 12:07 pm    Post subject: Reply with quote

Die ganzen Ratschläge aus dem schon genannten Thread hast du schon durch?

>=xf86-video-intel-2.13.0 wrote:
Code:
* This driver requires KMS support in your kernel
* Device Drivers --->
* Graphics support --->
* Direct Rendering Manager (XFree86 4.1.0 and higher DRI support) --->
* <*> Intel 830M, 845G, 852GM, 855GM, 865G (i915 driver) --->
* i915 driver
* [*] Enable modesetting on intel by default

Die Infos von der Treiber Installation hast du umgesetzt?
Zudem stelle auch sicher das ALLE anderen Framebuffer Treiber deaktiviert sind, das sind die unter
(make menuconfig)
Code:
Device Drivers  --->
Graphics support  --->
<*> Support for frame buffer devices  --->  Hier bitte ALLE Treiber deaktivieren

Dann wird es vermutlich schon funktionieren.
Back to top
View user's profile Send private message
curator
Apprentice
Apprentice


Joined: 10 Apr 2007
Posts: 193

PostPosted: Sat Apr 09, 2011 4:40 pm    Post subject: Reply with quote

Hi, kann mal gucken, zZ ist der genkernel kernel drin. Geht das damit nicht?
Back to top
View user's profile Send private message
MarcenX
n00b
n00b


Joined: 30 Mar 2005
Posts: 46

PostPosted: Mon Apr 11, 2011 8:28 pm    Post subject: Reply with quote

Doch geht auch mit dem genkernel
Code:
genkernel --splash --clean --install --menuconfig --mountboot all

Da bekommst du das Menü und nach dem Abspeichert wird der Kernel fertig gestellt.
http://www.gentoo.org/doc/de/genkernel.xml

Wenn das Modul nicht mit geladen wird, schreib es mal in die /etc/modules.autoload.d/kernel-2.6
Back to top
View user's profile Send private message
curator
Apprentice
Apprentice


Joined: 10 Apr 2007
Posts: 193

PostPosted: Wed Apr 13, 2011 5:15 pm    Post subject: Reply with quote

Hi, hat leider etwas gedauert, bis ich den eigenen Kernel am laufen hatte. SATA - Controller - länger Geschichte.

Mit dem neuen Kernel funktioniert es aber aller reibungslos. Also vielen Dank.

Mit genkernel geht es nicht meinte ich, dass es nicht mit genkernel out-of-the-box geht.
Den letzten hint habe ich daher noch nicht probiert, denn wenn ich mir schon einen eigenen Kernel baue, nutze ich den jetzt auch.

Vielen Dank nochmal
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum