Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
emerge --sync error
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Tue Feb 10, 2015 3:37 pm    Post subject: emerge --sync error Reply with quote

Code:

 >>>> Starting retry 4 of 4 with rsync://[2a01:90:200:10::1a]/getnoo-portage
 rsync: getaddrinfo:  rsync.gentoo.org 873: Address family for hostname not supported
 rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9]
 >>>>Retrying ...
 !!!!Exhaused addresses for rsync.gentoo.org


After 4 retry ??? So now gentoo need ipv6 addresses?
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
evetsnameloc
n00b
n00b


Joined: 14 Dec 2014
Posts: 26
Location: Colorado Springs, CO

PostPosted: Tue Feb 10, 2015 5:16 pm    Post subject: Reply with quote

Quote:
rsync://[2a01:90:200:10::1a]/getnoo-portage


Could this have anything to do with it?
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Tue Feb 10, 2015 11:24 pm    Post subject: Reply with quote

Maybe you right, but
USE=-ipv6
rsync recompiled with new use flags. But kernel i have compilled with ipv6 support.

today emerge --sync is doesn't worked

emerge-webrsync updated portage without errors...
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Wed Feb 11, 2015 2:05 am    Post subject: Reply with quote

But i have more question, cause i need use ipv6 for emerge --sync and if i use ipv4 i need to use emerge-webrsync !?!?!?!?!?!!?!?!

bla bla sommething changed.................... i just need to know what is changed... that may change my choise not in gentooway!
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
Hu
Moderator
Moderator


Joined: 06 Mar 2007
Posts: 13970

PostPosted: Wed Feb 11, 2015 2:16 am    Post subject: Reply with quote

DNS maintainers published an IPv6 AAAA record for that host. If you are using a broken ISP that still cannot route IPv6 correctly, you should sync to a hostname that does not offer AAAA records or change your rsync configuration to use IPv4.
Back to top
View user's profile Send private message
kurly
Apprentice
Apprentice


Joined: 02 Apr 2012
Posts: 253

PostPosted: Wed Feb 11, 2015 2:21 am    Post subject: Reply with quote

TigerJr wrote:
But i have more question, cause i need use ipv6 for emerge --sync and if i use ipv4 i need to use emerge-webrsync !?!?!?!?!?!!?!?!

bla bla sommething changed.................... i just need to know what is changed... that may change my choise not in gentooway!

As someone already told you in this thread, gentoo and getnoo are not the same thing. This is not an IPv4 vs IPv6 issue, though you seem to have an issue there as well. Correct your typo in /etc/portage/repos.conf/gentoo.conf and try again. Threatening to change to another type of Linux will not persuade anyone on these forums.
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Wed Feb 11, 2015 10:37 am    Post subject: Reply with quote

kurly wrote:
TigerJr wrote:
But i have more question, cause i need use ipv6 for emerge --sync and if i use ipv4 i need to use emerge-webrsync !?!?!?!?!?!!?!?!

bla bla sommething changed.................... i just need to know what is changed... that may change my choise not in gentooway!

As someone already told you in this thread, gentoo and getnoo are not the same thing. This is not an IPv4 vs IPv6 issue, though you seem to have an issue there as well. Correct your typo in /etc/portage/repos.conf/gentoo.conf and try again. Threatening to change to another type of Linux will not persuade anyone on these forums.

Still didn't synced today. And that is not an ISP problem.



I didn't want to threaten. But i confronted with problems that make me mad and that is not only ipv6 - ipv4 sync. Sorry for emotion questions if you can uderstand me.
evetsnameloc wrote:
Quote:
rsync://[2a01:90:200:10::1a]/getnoo-portage


Could this have anything to do with it?


Thats only forum mistake cause i didn't copy\paste. In config all is right.
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Thu Feb 19, 2015 9:22 pm    Post subject: Reply with quote

Still can't sync without ipv6
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
evetsnameloc
n00b
n00b


Joined: 14 Dec 2014
Posts: 26
Location: Colorado Springs, CO

PostPosted: Fri Feb 20, 2015 5:29 pm    Post subject: Reply with quote

Since this seems to be affecting only you (I have seen no other complaints here about not being able to "emerge --sync" without ipv6) I would conclude that the problem is with your installation, not with portage.

Could you post your /etc/portage/make.conf? And, if you have one, your /etc/portage/repos.conf/gentoo.conf?
Back to top
View user's profile Send private message
psva00
n00b
n00b


Joined: 05 Sep 2011
Posts: 16

PostPosted: Mon Feb 23, 2015 4:19 pm    Post subject: Reply with quote

Edit: Sorry, didn't see your post about copy/paste error.

Can you post the new errors for failing rsync after disabling IPV6?
Please also post your make.conf
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Mon Feb 23, 2015 9:29 pm    Post subject: Reply with quote

evetsnameloc wrote:
Since this seems to be affecting only you (I have seen no other complaints here about not being able to "emerge --sync" without ipv6) I would conclude that the problem is with your installation, not with portage.

Could you post your /etc/portage/make.conf? And, if you have one, your /etc/portage/repos.conf/gentoo.conf?


I haven't /etc/portage/repos.conf in this installation.
Here my make.conf and emerge.log


Code:

aegis ~ # cat /etc/portage/make.conf

# These settings were set by the catalyst build script that automatically
# built this stage.
# Please consult /usr/share/portage/config/make.conf.example for a more
# detailed example.
CFLAGS="-O2 -march=opteron -mmmx -msse2 -msse3 -m3dnow -pipe -fomit-frame-pointer -ftracer"
CXXFLAGS="${CFLAGS}"
# WARNING: Changing your CHOST is not something that should be done lightly.
# Please consult http://www.gentoo.org/doc/en/change-chost.xml before changing.
MAKEOPTS="-j4"
ACCEPT_KEYWORDS="amd64"
CPU_FLAGS_X86="3dnow 3dnowext mmx mmxext sse sse2 sse3"
CHOST="x86_64-pc-linux-gnu"
# These are the USE flags that were used in addition to what is provided by the
# profile used for building.
USE="bindist threads ncurses nptl X aqua -qt -qt4 -systemd -cups -polymouth udev -gusb -colord -ipv6 policykit opengl opencl icu alsa vorbis png jpeg -gtk -gtk2 opencl clang -openmp -perl aio"
VIDEO_CARDS="nouveau"
PORTDIR="/usr/portage"
DISTDIR="${PORTDIR}/distfiles"
PKGDIR="${PORTDIR}/packages"


aegis ~ # tail -n 20 /var/log/emerge.log
1424724678: Started emerge on: Feb 23, 2015 23:51:17
1424724678:  *** emerge  --sync
1424724678:  === sync
1424724678: >>> Synchronization of repository 'gentoo' located in '/usr/portage'...
1424724678: >>> Starting rsync with rsync://81.91.253.252/gentoo-portage
1424724864: >>> Starting retry 1 of 4 with rsync://176.28.50.119/gentoo-portage
1424725052: >>> Starting retry 2 of 4 with rsync://91.186.30.235/gentoo-portage
1424725241: >>> Starting retry 3 of 4 with rsync://[2a01:488:67:1000:b01c:3277:0:1]/gentoo-portage
1424725241: >>> Starting retry 4 of 4 with rsync://[2a01:90:200:10::1a]/gentoo-portage
1424725241:  *** terminating.
1424725408: Started emerge on: Feb 24, 2015 00:03:28
1424725408:  *** emerge  --sync
1424725408:  === sync
1424725408: >>> Synchronization of repository 'gentoo' located in '/usr/portage'...
1424725408: >>> Starting rsync with rsync://81.91.253.252/gentoo-portage
1424725616: >>> Starting retry 1 of 4 with rsync://176.28.50.119/gentoo-portage
1424725809: >>> Starting retry 2 of 4 with rsync://91.186.30.235/gentoo-portage
1424726005: >>> Starting retry 3 of 4 with rsync://[2a01:488:67:1000:b01c:3277:0:1]/gentoo-portage
1424726005: >>> Starting retry 4 of 4 with rsync://[2a01:90:200:10::1a]/gentoo-portage
1424726005:  *** terminating.





Sync for details:

Code:

aegis ~ # emerge --sync

>>> Synchronization of repository 'gentoo' located in '/usr/portage'...
>>> Starting rsync with rsync://81.91.253.252/gentoo-portage...
Welcome to starling.gentoo.org / rsync.gentoo.org

Server Address : 81.91.253.252, 2a01:90:200:10::1a
Contact Name   : mirror-admin@gentoo.org
Hardware       : 2 x Intel(R) Xeon(R) CPU E5649 @ 2.53GHz, 3959MB RAM
Sponsor        : Qube Managed Services Limited, Zurich, Switzerland, EU

Please note: common gentoo-netiquette says you should not sync more
than once a day.  Users who abuse the rsync.gentoo.org rotation
may be added to a temporary ban list.

MOTD autogenerated by update-rsync-motd on Thu Jul 24 06:39:12 UTC 2014

receiving incremental file list
timestamp.chk

Number of files: 1
Number of files transferred: 1
Total file size: 32 bytes
Total transferred file size: 32 bytes
Literal data: 32 bytes
Matched data: 0 bytes
File list size: 27
File list generation time: 0.001 seconds
File list transfer time: 0.000 seconds
Total bytes sent: 98
Total bytes received: 669

sent 98 bytes  received 669 bytes  306.80 bytes/sec
total size is 32  speedup is 0.04
Welcome to starling.gentoo.org / rsync.gentoo.org

Server Address : 81.91.253.252, 2a01:90:200:10::1a
Contact Name   : mirror-admin@gentoo.org
Hardware       : 2 x Intel(R) Xeon(R) CPU E5649 @ 2.53GHz, 3959MB RAM
Sponsor        : Qube Managed Services Limited, Zurich, Switzerland, EU

Please note: common gentoo-netiquette says you should not sync more
than once a day.  Users who abuse the rsync.gentoo.org rotation
may be added to a temporary ban list.

MOTD autogenerated by update-rsync-motd on Thu Jul 24 06:39:12 UTC 2014


-----------Too mcuh output cut out here----------

metadata/md5-cache/app-office/gnumeric-1.12.19
metadata/md5-cache/app-office/gnumeric-1.12.20
metadata/md5-cache/app-office/grisbi-1.0.0
metadata/md5-cache/app-office/libreoffice-4.3.5.2
metadata/md5-cache/app-office/libreoffice-4.3.6.2
metadata/md5-cache/app-office/libreoffice-4.3.9999
metadata/md5-cache/app-office/libreoffice-4.4.0.3
metadata/md5-cache/app-office/libreoffice-4.4.9999
metadata/md5-cache/app-office/libreoffice-9999
metadata/md5-cache/app-office/libreoffice-bin-4.3.5.2
metadata/md5-cache/app-office/passepartout-0.7.0-r1
metadata/md5-cache/app-office/pinpoint-0.1.5_pre20141026
metadata/md5-cache/app-office/planner-0.14.6_p20130520
metadata/md5-cache/app-office/pybliographer-1.2.15
metadata/md5-cache/app-office/pybliographer-1.2.15-r1
metadata/md5-cache/app-office/rubrica-2.1.6-r1
metadata/md5-cache/app-portage/epm-1.40
metadata/md5-cache/app-text/atril-1.8.0
metadata/md5-cache/app-text/atril-1.8.1
metadata/md5-cache/app-text/evince-3.12.2
metadata/md5-cache/app-text/evince-3.12.2-r1
metadata/md5-cache/app-text/evince-3.14.1
metadata/md5-cache/app-text/evince-3.14.1-r1
metadata/md5-cache/app-text/gnome-doc-utils-0.20.10-r1
metadata/md5-cache/app-text/gtkspell-3.0.4
metadata/md5-cache/app-text/gtranslator-2.91.6
metadata/md5-cache/app-text/libgxps-0.2.2
metadata/md5-cache/app-text/pdf2djvu-0.7.16
metadata/md5-cache/app-text/pdf2djvu-0.7.17
metadata/md5-cache/app-text/pdf2djvu-0.7.19
metadata/md5-cache/app-text/rman-3.2-r1
metadata/md5-cache/app-text/stardict-3.0.4
metadata/md5-cache/app-text/stardict-3.0.5
metadata/md5-cache/app-text/t1utils-1.38
metadata/md5-cache/app-text/xournal-0.4.7
metadata/md5-cache/app-text/xournal-0.4.8
metadata/md5-cache/app-text/xournal-9999
metadata/md5-cache/app-text/yelp-tools-3.12.1
metadata/md5-cache/app-text/yelp-tools-3.14.1
metadata/md5-cache/dev-cpp/atkmm-2.22.6
metadata/md5-cache/dev-cpp/atkmm-2.22.7
metadata/md5-cache/dev-cpp/cairomm-1.10.0
metadata/md5-cache/dev-cpp/gconfmm-2.28.3
metadata/md5-cache/dev-cpp/glibmm-2.40.0
metadata/md5-cache/dev-cpp/glibmm-2.42.0
metadata/md5-cache/dev-cpp/gnome-vfsmm-2.26.0
metadata/md5-cache/dev-cpp/gstreamermm-0.10.11
metadata/md5-cache/dev-cpp/gstreamermm-1.0.10
metadata/md5-cache/dev-cpp/gtkglextmm-1.2.0-r1
metadata/md5-cache/dev-cpp/gtkmm-2.24.4
metadata/md5-cache/dev-cpp/gtkmm-3.12.0
metadata/md5-cache/dev-cpp/gtkmm-3.14.0
metadata/md5-cache/dev-cpp/gtksourceviewmm-2.10.3
metadata/md5-cache/dev-cpp/gtksourceviewmm-3.2.0
metadata/md5-cache/dev-cpp/libglademm-2.6.7
metadata/md5-cache/dev-cpp/libgnomecanvasmm-2.26.0-r1
metadata/md5-cache/dev-cpp/libgnomemm-2.30.0
metadata/md5-cache/dev-cpp/libgnomeuimm-2.28.0-r1
metadata/md5-cache/dev-cpp/libxmlpp-2.36.0
metadata/md5-cache/dev-cpp/mm-common-0.9.6
metadata/md5-cache/dev-cpp/mm-common-0.9.7
metadata/md5-cache/dev-cpp/pangomm-2.28.4
metadata/md5-cache/dev-cpp/pangomm-2.34.0
metadata/md5-cache/dev-db/jxtray-0.5-r4
metadata/md5-cache/dev-db/mongodb-2.4.12
metadata/md5-cache/dev-db/mysql-connector-c++-1.1.5
metadata/md5-cache/dev-db/mysql-workbench-5.2.47
metadata/md5-cache/dev-db/mysql-workbench-5.2.47-r1
metadata/md5-cache/dev-db/mysql-workbench-6.0.9
metadata/md5-cache/dev-db/mysql-workbench-6.2.3
metadata/md5-cache/dev-db/mysql-workbench-6.2.3-r1
metadata/md5-cache/dev-db/postgresql-9.0.19
metadata/md5-cache/dev-db/postgresql-9.1.15
metadata/md5-cache/dev-db/postgresql-9.2.10
metadata/md5-cache/dev-db/postgresql-9.3.6
metadata/md5-cache/dev-db/postgresql-9.4.1
metadata/md5-cache/dev-embedded/gnome-avrdude-0.1
metadata/md5-cache/dev-haskell/fgl-5.5.0.1
metadata/md5-cache/dev-haskell/hscolour-1.20.3-r1
metadata/md5-cache/dev-haskell/libxml-sax-0.7.5
metadata/md5-cache/dev-haskell/unix-compat-0.4.1.3
metadata/md5-cache/dev-java/jflex-1.4.3
metadata/md5-cache/dev-java/jflex-1.4.3-r1
metadata/md5-cache/dev-java/jflex-1.5.0
metadata/md5-cache/dev-java/jflex-1.5.1
metadata/md5-cache/dev-java/jflex-1.6.0
metadata/md5-cache/dev-java/pdfbox-1.8.8
deleting metadata/md5-cache/dev-libs/grantlee-0.3.0
metadata/md5-cache/dev-java/qdox-1.12-r1

[receiver] io timeout after 180 seconds -- exiting
rsync error: timeout in data send/receive (code 30) at io.c(140) [receiver=3.0.9]
rsync: connection unexpectedly closed (2902 bytes received so far) [generator]
rsync error: error in rsync protocol data stream (code 12) at io.c(605) [generator=3.0.9]
>>> Retrying...


>>> Starting retry 2 of 4 with rsync://91.186.30.235/gentoo-portage
Welcome to boobie.gentoo.org / rsync.gentoo.org

Server Address :
Contact Name   : mirror-admin@gentoo.org
Hardware       : 2 x Intel(R) Xeon(R) CPU 3050 @ 2.13GHz, 3956MB RAM
Sponsor        : EUKhost, Maidenhead, England

Please note: common gentoo-netiquette says you should not sync more
than once a day.  Users who abuse the rsync.gentoo.org rotation
may be added to a temporary ban list.

MOTD autogenerated by update-rsync-motd on Thu Jul 24 06:32:46 UTC 2014

receiving incremental file list
timestamp.chk

Number of files: 1
Number of files transferred: 1
Total file size: 32 bytes
Total transferred file size: 32 bytes
Literal data: 32 bytes
Matched data: 0 bytes
File list size: 27
File list generation time: 0.001 seconds
File list transfer time: 0.000 seconds
Total bytes sent: 98
Total bytes received: 607

sent 98 bytes  received 607 bytes  470.00 bytes/sec
total size is 32  speedup is 0.05
Welcome to boobie.gentoo.org / rsync.gentoo.org

Server Address :
Contact Name   : mirror-admin@gentoo.org
Hardware       : 2 x Intel(R) Xeon(R) CPU 3050 @ 2.13GHz, 3956MB RAM
Sponsor        : EUKhost, Maidenhead, England

Please note: common gentoo-netiquette says you should not sync more
than once a day.  Users who abuse the rsync.gentoo.org rotation
may be added to a temporary ban list.

MOTD autogenerated by update-rsync-motd on Thu Jul 24 06:32:46 UTC 2014

receiving incremental file list
metadata/timestamp.chk

rsync error: timeout in data send/receive (code 30) at io.c(137) [sender=3.0.9]
rsync: connection unexpectedly closed (2564959 bytes received so far) [receiver]
rsync error: error in rsync protocol data stream (code 12) at io.c(605) [receiver=3.0.9]
rsync: connection unexpectedly closed (2902 bytes received so far) [generator]
rsync error: error in rsync protocol data stream (code 12) at io.c(605) [generator=3.0.9]
>>> Retrying...


>>> Starting retry 3 of 4 with rsync://[2a01:488:67:1000:b01c:3277:0:1]/gentoo-portage
rsync: getaddrinfo: 2a01:488:67:1000:b01c:3277:0:1 873: Address family for hostname not supported
rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9]
>>> Retrying...


>>> Starting retry 4 of 4 with rsync://[2a01:90:200:10::1a]/gentoo-portage
rsync: getaddrinfo: 2a01:90:200:10::1a 873: Address family for hostname not supported
rsync error: error in socket IO (code 10) at clientserver.c(122) [Receiver=3.0.9]
>>> Retrying...
!!! Exhausted addresses for rsync.gentoo.org


_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
psva00
n00b
n00b


Joined: 05 Sep 2011
Posts: 16

PostPosted: Tue Feb 24, 2015 7:07 pm    Post subject: Reply with quote

The additional retries are because your system is not built with IPv6, but the real error is at the end of the first attempt over IPv4:
Quote:

Code:
[receiver] io timeout after 180 seconds -- exiting
rsync error: timeout in data send/receive (code 30) at io.c(140) [receiver=3.0.9]
rsync: connection unexpectedly closed (2902 bytes received so far) [generator]
rsync error: error in rsync protocol data stream (code 12) at io.c(605) [generator=3.0.9]
>>> Retrying...



You're getting connected, but timing out.
Try setting RSYNC_TIMEOUT=500 in your make.conf
(See here: https://forums.gentoo.org/viewtopic-t-305269-highlight-rsync.html)

You also don't have any mirrors chosen in your make.conf, I would set that to something local. I don't know where you're located, but it looks like you're getting a server in England.
Code:

mirrorselect -i -o >> /mnt/gentoo/etc/portage/make.conf

mirrorselect -i -r -o >> /mnt/gentoo/etc/portage/make.conf


Cheers
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Tue Feb 24, 2015 9:42 pm    Post subject: Reply with quote

Tried to find nearest mirrors and tried setting RSYNC_TIMEOUT="500"

But emerge --sync still doesn't worked.


I update rsync-3.0.9 to rsync-3.1.1
Recompilled portage and python:2.7

But nothing.
_________________

Do not update portage without hotdog!

Xenogentooway?


Last edited by TigerJr on Tue Feb 24, 2015 10:25 pm; edited 1 time in total
Back to top
View user's profile Send private message
psva00
n00b
n00b


Joined: 05 Sep 2011
Posts: 16

PostPosted: Tue Feb 24, 2015 10:04 pm    Post subject: Reply with quote

Well then I'd say get rid of clang and emerge @world and @system a few times to let your system rebuild itself.
Quote:

Please note that although clang tries to be compatible with gcc, not all packages build correctly with it. Although some of them simply fail to build, there are also cases when packages build fine but fail horribly when run.

See: http://wiki.gentoo.org/wiki/Clang

If that doesn't do it, I think I'm at the end of what I can do for you here. Good luck.

Also, I think you want -plymouth rather than -polymouth.


EDIT:

Also, the post I linked earlier is pretty old, and I noticed this further down, may want to try again with this instead of the other tag:
Quote:

Note: RSYNC_TIMEOUT is now depricated and it's just a matter of time before it's no longer supported. Change your /etc/make.conf to use PORTAGE_RSYNC_EXTRA_OPTS="--timeout=500" if you were previously using RSYNC_TIMEOUT=500.
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Tue Feb 24, 2015 10:53 pm    Post subject: Reply with quote

psva00 wrote:
Well then I'd say get rid of clang and emerge @world and @system a few times to let your system rebuild itself.
Quote:

Please note that although clang tries to be compatible with gcc, not all packages build correctly with it. Although some of them simply fail to build, there are also cases when packages build fine but fail horribly when run.

See: http://wiki.gentoo.org/wiki/Clang

If that doesn't do it, I think I'm at the end of what I can do for you here. Good luck.

Also, I think you want -plymouth rather than -polymouth.


EDIT:

Also, the post I linked earlier is pretty old, and I noticed this further down, may want to try again with this instead of the other tag:
Quote:

Note: RSYNC_TIMEOUT is now depricated and it's just a matter of time before it's no longer supported. Change your /etc/make.conf to use PORTAGE_RSYNC_EXTRA_OPTS="--timeout=500" if you were previously using RSYNC_TIMEOUT=500.


Thanks for a tips with clang and plymouth, but i only recompilled llvm with clang support for mesa.

It's interresting thing to recompile @world or @system with clang - i would wait than it's done %) But in first gentoo-sources needs to recompile with clang if could it be better??? But i don't think that i could use it in near future.


If it's problem with ipv6 support, than you can't install gentoo properly on non ipv6 systems... Thats bad for gentoo.

I don't think that is my errors or problems of my provider, i think that is bakward compability problem.
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
psva00
n00b
n00b


Joined: 05 Sep 2011
Posts: 16

PostPosted: Wed Feb 25, 2015 2:30 am    Post subject: Reply with quote

I was suggesting you recompile WITHOUT clang. It's noted as giving unstable performance. If you're just using it for a single build, then you should put that in /etc/portage/package.use as it's currently a global USE flag on your system. This will cause problems as it means either you build what you want and then remove it, which causes it to rebuild later without the flag when you update, or you leave it there and your whole system builds with it.

IPv6 support does work on Gentoo, you currently have it disabled. Your other failure is unrelated to that, and is the cause of the IPv6 addresses being used as a fallback. I would start googling around for the messages from the rsync error I posted earlier. For example, the error references io.c line 140 (struct work_struct complete_work;/* deferred AIO completion */) and you have aio in your use flags. Might try rebuild without that.

Not to keep telling you to recompile everything, but I think your setup is the problem here, not Gentoo, or IPv6.

Cheers
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Wed Feb 25, 2015 12:07 pm    Post subject: Reply with quote

psva00 wrote:
I was suggesting you recompile WITHOUT clang. It's noted as giving unstable performance. If you're just using it for a single build, then you should put that in /etc/portage/package.use as it's currently a global USE flag on your system. This will cause problems as it means either you build what you want and then remove it, which causes it to rebuild later without the flag when you update, or you leave it there and your whole system builds with it.

I understand that if i leave clang feature and recompile whole system - i can get segmentation and other problems. Don't ask how...

Maybe may, but not must. If i using it for testing purpose for short time. It's just my testing desktop.
I using the whole system for single build - if it die, than i install new, that isn't a main system.

Rebuilding system those no need to updates. It's waste of my time.

Gentoo changing portage package very often(deleting old ebuild package, those installed on system, inluding updated version of the package those need сyclic dependencies without backward compability support), every new gentoo system install i get unique distribution system those lifetime can be low especialy if i updates system or even syncing of portage.

So i didn't update i using somme version of portage those package can live in system without conflicts.

If i needed to update somme package - i install on testing desktop stages and portage, testing updates for somme packages and if it works - then install updates on main system...

I helped in actualise http://openvz.org/Gentoo_template_creation wiki page. And i asked people who read this wiki-page not to bind portage from host system:
Quote:

Independed Gentoo portage tree for each container would be good idea, because newer portage can delete older ebuilds already installed in container with other dependences. Otherwise you can't reinstall already installed packages if you bind the newer version of portage in gentoo containers.


So now with systemd and ipv6 support i confronted with problems of actualization of those information.

I thinking about - frozzing the portage and use selected updates(only for packages those used in container work, cycling dependensies can't give you that updates... ). Especialy for containers, there not all the packages can work without conflicts.

psva00 wrote:

IPv6 support does work on Gentoo, you currently have it disabled. Your other failure is unrelated to that, and is the cause of the IPv6 addresses being used as a fallback. I would start googling around for the messages from the rsync error I posted earlier. For example, the error references io.c line 140 (struct work_struct complete_work;/* deferred AIO completion */) and you have aio in your use flags. Might try rebuild without that.

Not to keep telling you to recompile everything, but I think your setup is the problem here, not Gentoo, or IPv6.

Cheers

My strategy is simple IPv6 isn't hardcoded, so why system can't work without him?

I already start googling but i just wanted ask here. Maybe i have acurate advice.

You give me interesting tip with aio. I just try recompile rsync or whatever...
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Wed Feb 25, 2015 1:35 pm    Post subject: Reply with quote

I didn't find programms or libraries those need USE=aio - installed on my system



p.s.

[quote]
Today with two retries portage synced!!!!

I didn't do anything only reinstalled somme packages those didn't have relations to ipv6?

Quote:

1424870975: Started emerge on: Feb 25, 2015 16:29:34
1424870975: *** emerge libXext kmod libpipeline
1424870981: >>> emerge (1 of 3) sys-apps/kmod-19 to /
1424870985: === (1 of 3) Cleaning (sys-apps/kmod-19::/usr/portage/sys-apps/kmod/kmod-19.ebuild)
1424870985: === (1 of 3) Compiling/Merging (sys-apps/kmod-19::/usr/portage/sys-apps/kmod/kmod-19.ebuild)
1424871010: === (1 of 3) Merging (sys-apps/kmod-19::/usr/portage/sys-apps/kmod/kmod-19.ebuild)
1424871011: >>> AUTOCLEAN: sys-apps/kmod:0
1424871011: === Unmerging... (sys-apps/kmod-18-r1)
1424871013: >>> unmerge success: sys-apps/kmod-18-r1
1424871015: === (1 of 3) Updating world file (sys-apps/kmod-19)
1424871015: === (1 of 3) Post-Build Cleaning (sys-apps/kmod-19::/usr/portage/sys-apps/kmod/kmod-19.ebuild)
1424871015: ::: completed emerge (1 of 3) sys-apps/kmod-19 to /
1424871015: >>> emerge (2 of 3) x11-libs/libXext-1.3.3 to /
1424871015: === (2 of 3) Cleaning (x11-libs/libXext-1.3.3::/usr/portage/x11-libs/libXext/libXext-1.3.3.ebuild)
1424871016: === (2 of 3) Compiling/Merging (x11-libs/libXext-1.3.3::/usr/portage/x11-libs/libXext/libXext-1.3.3.ebuild)
1424871037: === (2 of 3) Merging (x11-libs/libXext-1.3.3::/usr/portage/x11-libs/libXext/libXext-1.3.3.ebuild)
1424871039: >>> AUTOCLEAN: x11-libs/libXext:0
1424871039: === Unmerging... (x11-libs/libXext-1.3.2)
1424871041: >>> unmerge success: x11-libs/libXext-1.3.2
1424871043: === (2 of 3) Updating world file (x11-libs/libXext-1.3.3)
1424871043: === (2 of 3) Post-Build Cleaning (x11-libs/libXext-1.3.3::/usr/portage/x11-libs/libXext/libXext-1.3.3.ebuild)
1424871043: ::: completed emerge (2 of 3) x11-libs/libXext-1.3.3 to /
1424871043: >>> emerge (3 of 3) dev-libs/libpipeline-1.4.0 to /
1424871043: === (3 of 3) Cleaning (dev-libs/libpipeline-1.4.0::/usr/portage/dev-libs/libpipeline/libpipeline-1.4.0.ebuild)
1424871043: === (3 of 3) Compiling/Merging (dev-libs/libpipeline-1.4.0::/usr/portage/dev-libs/libpipeline/libpipeline-1.4.0.ebuild)
1424871097: === (3 of 3) Merging (dev-libs/libpipeline-1.4.0::/usr/portage/dev-libs/libpipeline/libpipeline-1.4.0.ebuild)
1424871098: >>> AUTOCLEAN: dev-libs/libpipeline:0
1424871098: === Unmerging... (dev-libs/libpipeline-1.2.5)
1424871100: >>> unmerge success: dev-libs/libpipeline-1.2.5
1424871102: === (3 of 3) Updating world file (dev-libs/libpipeline-1.4.0)
1424871102: === (3 of 3) Post-Build Cleaning (dev-libs/libpipeline-1.4.0::/usr/portage/dev-libs/libpipeline/libpipeline-1.4.0.ebuild)
1424871102: ::: completed emerge (3 of 3) dev-libs/libpipeline-1.4.0 to /
1424871102: *** Finished. Cleaning up...
1424871103: *** exiting successfully.
1424871104: *** terminating.
1424874459: Started emerge on: Feb 25, 2015 17:27:39
1424874459: *** emerge --sync
1424874459: === sync
1424874459: >>> Synchronization of repository 'gentoo' located in '/usr/portage'...
1424874460: >>> Starting rsync with rsync://91.186.30.235/gentoo-portage
1424874655: >>> Starting retry 1 of 4 with rsync://81.91.253.252/gentoo-portage
1424874721: === Sync completed with rsync://81.91.253.252/gentoo-portage
1424874724: *** terminating.



I think that situation can repeated and problem is amount of information transfered by rsync protocol OR DoS?
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
psva00
n00b
n00b


Joined: 05 Sep 2011
Posts: 16

PostPosted: Mon Mar 02, 2015 9:01 pm    Post subject: Reply with quote

Bit of a necro here, but I just encountered this exact error on my machine and wanted to follow up. May not be the same problem but...I tried to execute as a normal user, and that's what caused it for me. Rerunning emerge --sync as root solved the problem.

Cheers
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Tue Mar 03, 2015 2:34 pm    Post subject: Reply with quote

need debug rsync command without python script...

emerge --sync - Still showed error!

emerge-webrsync - Now timestamp.x updated with erorr of emerge --sync and says that current local timestamp is possibly identical to the latest snapshot.

emerge-webrsync --revert option doesn't work?

I lost updates need reinstall portage tree with my hands!
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
psva00
n00b
n00b


Joined: 05 Sep 2011
Posts: 16

PostPosted: Wed Mar 11, 2015 6:08 am    Post subject: Reply with quote

If this is a new install, have you updated your system time and configured timezone and clock info properly?
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Thu Mar 12, 2015 2:30 pm    Post subject: Reply with quote

This is no longer new install, i installed system on 10th of february, from that day rsync works 3-4 times well and sometimes only after emerge-webrsync. I think this is amount of information transfered through rsync stops synchronization process with timeout error.

clock=local; hwclock use time from bios.

Sometimes i get portage-latest.tar.bz2 from distfiles.gentoo.org remove old portage and manual install new portage .
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Wed Apr 08, 2015 8:26 pm    Post subject: Reply with quote

Manual tests showed error on gentoo IP side cause other mirrors are works fine. Reason is not in ipv6 support.
Code:

rsync --recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --verbose rsync://mirror.yandex.ru/gentoo-portage/ /usr/portage

Works fast.



Code:

rsync --recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --verbose rsync://81.91.253.252/gentoo-portage/ /usr/portage

rsync error: timeout in data send/receive (code 30) at io.c(137) [sender=3.0.9]
rsync: connection unexpectedly closed (4778913 bytes received so far) [receiver]
rsync error: error in rsync protocol data stream (code 12) at io.c(226) [receiver=3.1.1]
rsync: connection unexpectedly closed (1269428 bytes received so far) [generator]
rsync error: error in rsync protocol data stream (code 12) at io.c(226) [generator=3.1.1]

Quote:
xo # strace -p 3395
Process 3395 attached
select(5, [4], [], [4], {28, 383685}
^CProcess 3395 detached
<detached ...>

Rsync stops on select call and didn't get information through protocol.

Guess why? ISP problem?
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Fri Aug 14, 2015 10:30 pm    Post subject: Reply with quote

So if gentoo-developers confronted with problems of rsync, they use git ))))))).

But if someone get problems with emerge --sync please don't use emerge python scripts for that, use rsync command.

Code:
rsync --recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --verbose rsync://mirror.yandex.ru/gentoo-portage/ /usr/portage

_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum