Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] No sound( FCH Azalia Controller )
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Jozpod
n00b
n00b


Joined: 14 May 2015
Posts: 22

PostPosted: Sat May 16, 2015 9:47 pm    Post subject: [SOLVED] No sound( FCH Azalia Controller ) Reply with quote

Hi again,

I cannot get any sound from a mentioned soundcard.
I used the command
Code:
speaker-test -t wav -c 2

...and also alsamixer stopped working : cannot open mixer: invalid argument


Last edited by Jozpod on Sun May 17, 2015 10:25 am; edited 2 times in total
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43742
Location: 56N 3W

PostPosted: Sat May 16, 2015 9:54 pm    Post subject: Reply with quote

Jozpod,

That's a codec, not a sound card.
What does lspci say your sound card is?
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Jozpod
n00b
n00b


Joined: 14 May 2015
Posts: 22

PostPosted: Sat May 16, 2015 10:05 pm    Post subject: Reply with quote

Oh, so that is a codec...
Here are soundcards...
Code:
lspci | grep Audio

Code:
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43742
Location: 56N 3W

PostPosted: Sat May 16, 2015 10:12 pm    Post subject: Reply with quote

Jozpod,

They are both Intel-HDA compatable devices.

However there is a gotcha ..

Code:
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
will be your default sound card as its first on the PCI bus.
It provides digital audio out over the HDMI port only.
Code:
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
will be your second sound card.
If your kernel is set up correctly now,
Code:
alsamixer -c0
will only show the HDMI mute control.
Code:
alsamixer -c1
will show all the controls for your analogue sound card.

That leaves some setup so your analogue card is used for your sound
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Jozpod
n00b
n00b


Joined: 14 May 2015
Posts: 22

PostPosted: Sat May 16, 2015 10:51 pm    Post subject: Reply with quote

Code:
alsamixer -c0
shows S/PDIF low bar
Code:
alsamixer -c1
has many options, i set master, headphone,speaker,pcm to full.
here is paste from /etc/asound.conf
Code:

pcm.!default {
type hw
card 1
device 0
}
ctl.!default {
type hw
card 1
device 0
}

Code:
aplay -l


Code:
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0, [HDMI 0]
Sebdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC269VB Analog, [ALC269VB Analog]
Sebdevices: 1/1
Subdevice #0: subdevice #0

There is something in dmesg ...

Code:
[1.527740] snd_hda_intel 0000:00:00:01.1: Force to non-snoop mode
[1.528172] snd_hda_intel 0000:00:00:01.1: irq 27 for MSI/MSI-X
Back to top
View user's profile Send private message
Jozpod
n00b
n00b


Joined: 14 May 2015
Posts: 22

PostPosted: Sun May 17, 2015 10:24 am    Post subject: Reply with quote

By god, the whole time i had sound muted. I thought no sound issue was involved with Auto-Mute Mode option in alsamixer, faulty device driver and didn't pay attention to number/double letters below the bars. MM option was set all the time

Thanks for help
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum