Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Erro na compilacao do Kernel na maquina com LiveDVD
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Portuguese
View previous topic :: View next topic  
Author Message
Xinitrc
n00b
n00b


Joined: 06 Aug 2019
Posts: 8
Location: Jaraguá do Su/SC

PostPosted: Thu Aug 08, 2019 2:56 pm    Post subject: Erro na compilacao do Kernel na maquina com LiveDVD Reply with quote

livecd linux # genkernel all
* Gentoo Linux Genkernel; Version 3.4.52.4
* Running with options: all

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* Linux Kernel 4.5.2-aufs for x86_64...
* .. with config file /usr/share/genkernel/arch/x86_64/generated-config
* kernel: Using config from /usr/share/genkernel/arch/x86_64/generated-config
* Previous config backed up to .config--2019-08-08--14-49-58.bak
* kernel: >> Running mrproper...
* >> Running oldconfig...
* kernel: >> Cleaning...
* ERROR: Failed to compile the "prepare" target...
*
* -- Grepping log... --
*
* SHIPPED scripts/kconfig/zconf.lex.c
* SHIPPED scripts/kconfig/zconf.hash.c
* HOSTCC scripts/kconfig/zconf.tab.o
* HOSTLD scripts/kconfig/conf
*scripts/kconfig/conf --oldconfig Kconfig
*.config:76:warning: override: reassigning to symbol UV_MMTIMER
*.config:125:warning: symbol value 'm' invalid for X86_INTEL_PSTATE
*.config:2390:warning: override: FB_MB862XX_LIME changes choice state
*.config:2811:warning: symbol value 'm' invalid for AB3100_CORE
*.config:2820:warning: symbol value 'm' invalid for MFD_WM8400
*.config:2821:warning: symbol value 'm' invalid for MFD_WM8350_I2C
*.config:2822:warning: symbol value 'm' invalid for MFD_WM8350
*.config:2823:warning: symbol value 'm' invalid for MFD_WM831X
*.config:3460:warning: symbol value 'm' invalid for POWER_SUPPLY
*--
*Allow for memory compaction (COMPACTION) [Y/n/?] y
* Page migration (MIGRATION) [Y/?] y
*Enable bounce buffers (BOUNCE) [Y/n/?] (NEW)
*Enable KSM for page merging (KSM) [Y/n/?] y
*Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] 4096
*Enable recovery from hardware memory errors (MEMORY_FAILURE) [Y/n/?] y
*--
* Debug Statements (ACPI_DEBUG) [N/y/?] (NEW)
* PCI slot detection driver (ACPI_PCI_SLOT) [Y/n/?] y
* Container and Module Devices (ACPI_CONTAINER) [Y/?] (NEW) y
* Memory Hotplug (ACPI_HOTPLUG_MEMORY) [Y/n/?] y
* Smart Battery System (ACPI_SBS) [N/m/y/?] (NEW)
* Hardware Error Device (ACPI_HED) [Y/?] y
* Allow ACPI methods to be inserted/replaced at run time (ACPI_CUSTOM_METHOD) [N/m/y/?] (NEW)
* Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] (NEW)
* ACPI NVDIMM Firmware Interface Table (NFIT) (ACPI_NFIT) [N/m/y/?] (NEW)
* ACPI Platform Error Interface (APEI) (ACPI_APEI) [Y/n/?] y
* APEI Generic Hardware Error Source (ACPI_APEI_GHES) [Y/n/?] y
* APEI PCIe AER logging/recovering support (ACPI_APEI_PCIEAER) [Y/n/?] y
* APEI memory error recovering support (ACPI_APEI_MEMORY_FAILURE) [Y/n/?] y
* APEI Error INJection (EINJ) (ACPI_APEI_EINJ) [M/n/y/?] m
* APEI Error Record Serialization Table (ERST) Debug Support (ACPI_APEI_ERST_DEBUG) [M/n/y/?] m
* Extended Error Log support (ACPI_EXTLOG) [N/m/y/?] (NEW)
*--
* Bus options (PCI etc.)
*
*PCI support (PCI) [Y/n/?] y
* Support mmconfig PCI config space access (PCI_MMCONFIG) [N/y] (NEW)
* PCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
* Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
* PCI Express ECRC settings control (PCIE_ECRC) [Y/n/?] y
* PCIe AER error injector support (PCIEAER_INJECT) [M/n/y/?] m
*--
* *
* round-robin scheduling (IP_VS_RR) [M/n/?] m
* weighted round-robin scheduling (IP_VS_WRR) [M/n/?] m
* least-connection scheduling (IP_VS_LC) [M/n/?] m
* weighted least-connection scheduling (IP_VS_WLC) [M/n/?] m
* weighted failover scheduling (IP_VS_FO) [N/m/?] (NEW)
*--
* * Wireless
* *
* Wireless (WIRELESS) [Y] y
* cfg80211 - wireless configuration API (CFG80211) [M/n/?] m
* nl80211 testmode command (NL80211_TESTMODE) [N/y/?] n
* enable developer warnings (CFG80211_DEVELOPER_WARNINGS) [N/y/?] n
*--
*SCSI CDROM support (BLK_DEV_SR) [M/n/y/?] m
* Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
*SCSI generic support (CHR_DEV_SG) [M/n/y/?] m
*SCSI media changer support (CHR_DEV_SCH) [M/n/y/?] m
*SCSI Enclosure Support (SCSI_ENCLOSURE) [M/n/?] m
*Verbose SCSI error reporting (kernel size +=75K) (SCSI_CONSTANTS) [Y/n/?] y
*--
* Compile All OSD modules with lots of DEBUG prints (SCSI_OSD_DEBUG) [N/y/?] n
*
* Serial ATA and Parallel ATA drivers (libata)
*
*Serial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
* Verbose ATA error reporting (ATA_VERBOSE_ERROR) [Y/n/?] y
*--
* IP-over-InfiniBand data path debugging (INFINIBAND_IPOIB_DEBUG_DATA) [N/y/?] n
* InfiniBand SCSI RDMA Protocol (INFINIBAND_SRP) [M/n/?] m
* InfiniBand SCSI RDMA Protocol target support (INFINIBAND_SRPT) [N/m/?] (NEW)
* iSCSI Extensions for RDMA (iSER) (INFINIBAND_ISER) [M/n/?] m
*
* EDAC (Error Detection And Correction) reporting
*
*EDAC (Error Detection And Correction) reporting (EDAC) [Y/n/?] y
* EDAC legacy sysfs (EDAC_LEGACY_SYSFS) [Y/n/?] y
* Debugging (EDAC_DEBUG) [N/y/?] n
* Decode MCEs in human-readable form (only on AMD for now) (EDAC_DECODE_MCE) [M/n/y/?] m
* Main Memory EDAC (Error Detection And Correction) reporting (EDAC_MM_EDAC) [M/n/y/?] m
* AMD64 (Opteron, Athlon64) (EDAC_AMD64) [M/n/?] m
* Sysfs HW Error injection facilities (EDAC_AMD64_ERROR_INJECTION) [Y/n/?] y
*--
* JFS statistics (JFS_STATISTICS) [N/y/?] n
*XFS filesystem support (XFS_FS) [M/n/y/?] m
* XFS Quota support (XFS_QUOTA) [Y/n/?] y
* XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
* XFS Realtime subvolume support (XFS_RT) [N/y/?] n
* XFS Verbose Warnings (XFS_WARN) [N/y/?] (NEW)
*--
*Inotify support for userspace (INOTIFY_USER) [Y/n/?] y
*Filesystem wide access notification (FANOTIFY) [Y/n/?] y
* fanotify permissions checking (FANOTIFY_ACCESS_PERMISSIONS) [N/y/?] (NEW)
*Quota support (QUOTA) [Y/n/?] y
*Report quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [Y/n/?] y
*Print quota warnings to console (OBSOLETE) (PRINT_QUOTA_WARNING) [Y/n/?] y
*--
*RCU CPU stall timeout in seconds (RCU_CPU_STALL_TIMEOUT) [21] (NEW)
*Enable tracing for RCU (RCU_TRACE) [N/y/?] n
*Provide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
*Force round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
*Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
*Notifier error injection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] (NEW)
*--
* CHK include/generated/utsrelease.h
* UPD include/generated/utsrelease.h
* HOSTLD arch/x86/tools/relocs
* CC kernel/bounds.s
* CHK include/generated/timeconst.h
*kernel/bounds.c:1:0: error: CPU you selected does not support x86-64 instruction set
* /*
* ^
*make[1]: *** [Kbuild:45: kernel/bounds.s] Error 1
*make[1]: *** Waiting for unfinished jobs....
* UPD include/generated/timeconst.h
*make: *** [Makefile:993: prepare0] Error 2
*--
* Running with options: all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
*
* ERROR: Failed to compile the "prepare" target...
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*
livecd linux #

O que tenho que fazer para corrigir o problema?
Back to top
View user's profile Send private message
Xinitrc
n00b
n00b


Joined: 06 Aug 2019
Posts: 8
Location: Jaraguá do Su/SC

PostPosted: Thu Aug 08, 2019 4:51 pm    Post subject: Resolvido Reply with quote

Eu so tinha que escolher no comeco (quando liga o computador) arquitetura x86 somente e dai compilou sem erro.
Back to top
View user's profile Send private message
Xinitrc
n00b
n00b


Joined: 06 Aug 2019
Posts: 8
Location: Jaraguá do Su/SC

PostPosted: Thu Aug 08, 2019 6:11 pm    Post subject: Me iludi Reply with quote

Me iludi,pensei que estava compilando sem erro,mas quando chegou no final, disse que faltava espaco no disco.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Portuguese All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum