Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Motherboard kaputt. Wie bekommen ich mein System auf UEFI
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

Goto page Previous  1, 2  
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
Erdie
Advocate
Advocate


Joined: 20 May 2004
Posts: 2032
Location: Heidelberg - Germany

PostPosted: Sat Oct 25, 2014 1:38 pm    Post subject: Reply with quote

Na super,

jetzt ist er tot.

ich hatte die Speichergeschwindigkeit im BIOS auf standard zurückgesetzt und wollte rebooten. Der Reboot ging schief und jetzt bootet er noch nicht einmal in das Bios. Es passiert schlichtweg gar ncihts mehr ausser dass das DVD Laufwerk gescannt wird. Der Bildschirm bleicht schwarz. Wahrscheinlich ist jetzt das Board kaputt.

Update: Nachdem ich eine Weile gewartet hatte, startet er wieder. Dieses Mal in einen Kernel Panic.
_________________
Desktop AMD FX-4300 12GB RAM, Asus GF GTX 650. Sound RME Multiface + PCI + Cardbus, 2x RME Quadmic, 1x Behringer ADA8000 + ganz viele Modellflugzeuge, ein Tandem, Rennrad und DFXL ;)
2x IBM Thinkpad T60
Zotag Mag Mini Atom
Raspberry Pi 1 + 2 + Zero W
Back to top
View user's profile Send private message
Erdie
Advocate
Advocate


Joined: 20 May 2004
Posts: 2032
Location: Heidelberg - Germany

PostPosted: Sat Oct 25, 2014 1:56 pm    Post subject: Reply with quote

Wenn ich es schaffe, in den schwarzen Schirm zu starten, zeigt dmesg folgendes:

[code:1:dffa042158]
0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.14.14-gentoo (root@kellerkind) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #2 SMP PREEMPT Sat Oct 18 12:37:26 CEST 2014
[ 0.000000] Command line: root=/dev/sda2
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba870fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba871000-0x00000000bab4cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bab4d000-0x00000000bab5cfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bab5d000-0x00000000bb95afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb95b000-0x00000000bca37fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bca38000-0x00000000bca38fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bca39000-0x00000000bcc3efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bcc3f000-0x00000000bd082fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000023fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 R2.0, BIOS 2501 04/07/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BD800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 base 0000BE000000 mask FFFFFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000240000000 aka 9216M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3032MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC
[ 0.000000] total RAM covered: 3032M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3032MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 3040MB, range: 32MB, type UC
[ 0.000000] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01cb5000, 0x01cb5fff] PGTABLE
[ 0.000000] BRK [0x01cb6000, 0x01cb6fff] PGTABLE
[ 0.000000] BRK [0x01cb7000, 0x01cb7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23fe00000-0x23fffffff]
[ 0.000000] [mem 0x23fe00000-0x23fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23fdfffff]
[ 0.000000] [mem 0x23c000000-0x23fdfffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
[ 0.000000] [mem 0x200000000-0x23bffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xba870fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xba7fffff] page 2M
[ 0.000000] [mem 0xba800000-0xba870fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbca38000-0xbca38fff]
[ 0.000000] [mem 0xbca38000-0xbca38fff] page 4k
[ 0.000000] BRK [0x01cb8000, 0x01cb8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbcc3f000-0xbd082fff]
[ 0.000000] [mem 0xbcc3f000-0xbcdfffff] page 4k
[ 0.000000] [mem 0xbce00000-0xbcffffff] page 2M
[ 0.000000] [mem 0xbd000000-0xbd082fff] page 4k
[ 0.000000] BRK [0x01cb9000, 0x01cb9fff] PGTABLE
[ 0.000000] BRK [0x01cba000, 0x01cbafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbd7f4000-0xbd7fffff]
[ 0.000000] [mem 0xbd7f4000-0xbd7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M
[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G
[ 0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000bab55070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000bab5c200 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131218/tbfadt-634)
[ 0.000000] ACPI: DSDT 00000000bab55168 007095 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bb955f80 000040
[ 0.000000] ACPI: APIC 00000000bab5c310 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000bab5c390 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000bab5c3d8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000bab5c418 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: BGRT 00000000bab5cd68 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000bab5c4a8 0008BC (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23fffffff]
[ 0.000000] NODE_DATA [mem 0x23fff7000-0x23fffafff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880237600000-ffff88023f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xba870fff]
[ 0.000000] node 0: [mem 0xbca38000-0xbca38fff]
[ 0.000000] node 0: [mem 0xbcc3f000-0xbd082fff]
[ 0.000000] node 0: [mem 0xbd7f4000-0xbd7fffff]
[ 0.000000] node 0: [mem 0x100001000-0x23fffffff]
[ 0.000000] On node 0 totalpages: 2075742
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11892 pages used for memmap
[ 0.000000] DMA32 zone: 761026 pages, LIFO batch:31
[ 0.000000] Normal zone: 20480 pages used for memmap
[ 0.000000] Normal zone: 1310719 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba871000-0xbab4cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbab4d000-0xbab5cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbab5d000-0xbb95afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb95b000-0xbca37fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbca39000-0xbcc3efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd800000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xbd800000-0xfebfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88023fc00000 s78848 r8192 d23552 u524288
[ 0.000000] pcpu-alloc: s78848 r8192 d23552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2043285
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda2
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b0000000
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xb3ffffff]
[ 0.000000] Memory: 8026564K/8302968K available (5609K kernel code, 721K rwdata, 2224K rodata, 1036K init, 984K bss, 276404K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3210.779 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6421.55 BogoMIPS (lpj=3210779)
[ 0.000602] pid_max: default: 32768 minimum: 301
[ 0.000933] ACPI: Core revision 20131218
[ 0.003503] ACPI: All ACPI Tables successfully acquired
[ 0.212821] Security Framework initialized
[ 0.213580] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.216250] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.217544] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.217851] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.218656] tseg: 00bd800000
[ 0.218659] CPU: Physical Processor ID: 0
[ 0.218952] CPU: Processor Core ID: 0
[ 0.219245] mce: CPU supports 6 MCE banks
[ 0.219582] LVT offset 0 assigned for vector 0xf9
[ 0.219879] process: using AMD E400 aware idle routine
[ 0.220176] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[ 0.221085] Freeing SMP alternatives memory: 16K (ffffffff81bb9000 - ffffffff81bbd000)
[ 0.222030] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.232330] smpboot: CPU0: AMD Phenom(tm) II X4 955 Processor (fam: 10, model: 04, stepping: 03)
[ 0.334474] Performance Events: AMD PMU driver.
[ 0.334810] ... version: 0
[ 0.335136] ... bit width: 48
[ 0.335430] ... generic registers: 4
[ 0.335718] ... value mask: 0000ffffffffffff
[ 0.336013] ... max period: 00007fffffffffff
[ 0.336341] ... fixed-purpose events: 0
[ 0.336639] ... event mask: 000000000000000f
[ 0.336960] process: System has AMD C1E enabled
[ 0.337259] process: Switch to broadcast mode on CPU0
[ 0.341381] MCE: In-kernel MCE decoding enabled.
[ 0.343382] x86: Booting SMP configuration:
[ 0.350072] .... node #0, CPUs: #1
[ 0.363343] process: Switch to broadcast mode on CPU1
[ 0.365391] #2
[ 0.378588] process: Switch to broadcast mode on CPU2
[ 0.380396] #3
[ 0.393624] x86: Booted up 1 node, 4 CPUs
[ 0.393630] process: Switch to broadcast mode on CPU3
[ 0.394505] smpboot: Total of 4 processors activated (25686.23 BogoMIPS)
[ 0.399180] devtmpfs: initialized
[ 0.399642] PM: Registering ACPI NVS region [mem 0xbab5d000-0xbb95afff] (14671872 bytes)
[ 0.400453] PM: Registering ACPI NVS region [mem 0xbca39000-0xbcc3efff] (2121728 bytes)
[ 0.401182] kworker/u8:0 (27) used greatest stack depth: 5912 bytes left
[ 0.401413] NET: Registered protocol family 16
[ 0.402069] cpuidle: using governor ladder
[ 0.402355] cpuidle: using governor menu
[ 0.402671] node 0 link 0: io port [d000, ffff]
[ 0.402674] TOM: 00000000c0000000 aka 3072M
[ 0.402955] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.402957] node 0 link 0: mmio [c0000000, fef0ffff] ==> [c0000000, dfffffff] and [f0000000, fef0ffff]
[ 0.402962] TOM2: 0000000240000000 aka 9216M
[ 0.403243] bus: [bus 00-1f] on node 0 link 0
[ 0.403245] bus: 00 [io 0x0000-0xffff]
[ 0.403246] bus: 00 [mem 0xc0000000-0xdfffffff]
[ 0.403247] bus: 00 [mem 0xf0000000-0xffffffff]
[ 0.403248] bus: 00 [mem 0x240000000-0xfcffffffff]
[ 0.403298] ACPI: bus type PCI registered
[ 0.403697] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.404252] PCI: not using MMCONFIG
[ 0.404535] PCI: Using configuration type 1 for base access
[ 0.404817] PCI: Using configuration type 1 for extended access
[ 0.412354] bio: create slab <bio-0> at 0
[ 0.412884] ACPI: Added _OSI(Module Device)
[ 0.413165] ACPI: Added _OSI(Processor Device)
[ 0.413449] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.413763] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.415464] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.423768] ACPI: Interpreter enabled
[ 0.424056] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
[ 0.424694] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[ 0.425309] ACPI: (supports S0 S3 S4 S5)
[ 0.425590] ACPI: Using IOAPIC for interrupt routing
[ 0.426016] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.426571] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.427407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.494465] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.494785] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.495317] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.495863] PCI host bridge to bus 0000:00
[ 0.496178] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.496464] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.496748] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.497032] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.497350] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.497635] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.497921] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.498207] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.498536] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.498701] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.498741] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.498782] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.499155] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.499192] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.499234] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.499576] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[ 0.499646] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.499686] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.500057] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
[ 0.500094] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.500134] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.500491] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.500508] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.500516] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.500524] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.500532] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.500540] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.500548] pci 0000:00:11.0: reg 0x24: [mem 0xfe30b000-0xfe30b3ff]
[ 0.500672] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.500683] pci 0000:00:12.0: reg 0x10: [mem 0xfe30a000-0xfe30afff]
[ 0.500763] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.501175] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.501191] pci 0000:00:12.2: reg 0x10: [mem 0xfe309000-0xfe3090ff]
[ 0.501257] pci 0000:00:12.2: supports D1 D2
[ 0.501259] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.501300] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.501649] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.501660] pci 0000:00:13.0: reg 0x10: [mem 0xfe308000-0xfe308fff]
[ 0.501739] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.502108] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.502123] pci 0000:00:13.2: reg 0x10: [mem 0xfe307000-0xfe3070ff]
[ 0.502190] pci 0000:00:13.2: supports D1 D2
[ 0.502192] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.502235] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.502580] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.502719] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.502737] pci 0000:00:14.2: reg 0x10: [mem 0xfe300000-0xfe303fff 64bit]
[ 0.502790] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.502830] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.503199] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.503357] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.503443] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.503815] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.503829] pci 0000:00:14.5: reg 0x10: [mem 0xfe306000-0xfe306fff]
[ 0.503918] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.504313] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.504325] pci 0000:00:16.0: reg 0x10: [mem 0xfe305000-0xfe305fff]
[ 0.504405] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.504820] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.504836] pci 0000:00:16.2: reg 0x10: [mem 0xfe304000-0xfe3040ff]
[ 0.504902] pci 0000:00:16.2: supports D1 D2
[ 0.504904] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.504945] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.505332] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.505428] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.505519] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.505609] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.505702] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.505867] pci 0000:01:00.0: [10de:0fc6] type 00 class 0x030000
[ 0.505877] pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.505889] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.505900] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.505907] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.505915] pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
[ 0.506036] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 0.506046] pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
[ 0.507379] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.507665] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.507668] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.507672] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.507771] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.507784] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.507804] pci 0000:02:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
[ 0.507817] pci 0000:02:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[ 0.507883] pci 0000:02:00.0: supports D1 D2
[ 0.507885] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.509379] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.509699] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.509703] pci 0000:00:04.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 0.509806] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
[ 0.509825] pci 0000:03:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
[ 0.509921] pci 0000:03:00.0: PME# supported from D3cold
[ 0.511377] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.511664] pci 0000:00:05.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.511768] pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330
[ 0.511786] pci 0000:04:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
[ 0.511916] pci 0000:04:00.0: PME# supported from D3cold
[ 0.513377] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.513665] pci 0000:00:07.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.513782] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 0.514073] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.514075] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.514077] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.514079] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.514081] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.514083] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.514085] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.514263] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.514992] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.515717] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.516407] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[ 0.517115] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.517786] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.518489] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.519158] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.519929] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 0.520312] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.520773] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.521295] vgaarb: loaded
[ 0.521579] vgaarb: bridge control possible 0000:01:00.0
[ 0.522061] SCSI subsystem initialized
[ 0.522458] libata version 3.00 loaded.
[ 0.522462] ACPI: bus type USB registered
[ 0.522815] usbcore: registered new interface driver usbfs
[ 0.523164] usbcore: registered new interface driver hub
[ 0.523498] usbcore: registered new device driver usb
[ 0.523869] Linux video capture interface: v2.00
[ 0.524351] Advanced Linux Sound Architecture Driver Initialized.
[ 0.524635] PCI: Using ACPI for IRQ routing
[ 0.531897] PCI: pci_cache_line_size set to 64 bytes
[ 0.531949] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.531951] e820: reserve RAM buffer [mem 0xba871000-0xbbffffff]
[ 0.531952] e820: reserve RAM buffer [mem 0xbca39000-0xbfffffff]
[ 0.531954] e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
[ 0.531955] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
[ 0.532297] cfg80211: Calling CRDA to update world regulatory domain
[ 0.532632] NetLabel: Initializing
[ 0.532947] NetLabel: domain hash size = 128
[ 0.533228] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.533542] NetLabel: unlabeled traffic allowed by default
[ 0.533960] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.534438] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.536777] Switched to clocksource hpet
[ 0.547434] pnp: PnP ACPI init
[ 0.547754] ACPI: bus type PNP registered
[ 0.548193] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.548479] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.548834] system 00:01: [io 0x040b] has been reserved
[ 0.549121] system 00:01: [io 0x04d6] has been reserved
[ 0.549405] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.549689] system 00:01: [io 0x0c14] has been reserved
[ 0.550018] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.550301] system 00:01: [io 0x0c52] has been reserved
[ 0.550584] system 00:01: [io 0x0c6c] has been reserved
[ 0.550878] system 00:01: [io 0x0c6f] has been reserved
[ 0.551161] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.551474] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.551758] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.552058] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.552342] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.552659] system 00:01: [io 0x0800-0x089f] could not be reserved
[ 0.552952] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.553238] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.553522] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.553850] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.554135] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.554420] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.554705] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.555034] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.555319] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.555604] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.555900] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[ 0.556218] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.556447] system 00:02: [io 0x0290-0x02af] has been reserved
[ 0.556735] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.556753] pnp 00:03: [dma 4]
[ 0.556835] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.556908] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.556970] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.557074] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.557391] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.557454] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.557529] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.557679] pnp 00:09: [dma 0 disabled]
[ 0.557765] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.557934] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.558067] system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.558353] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.558611] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.558616] pnp: PnP ACPI: found 13 devices
[ 0.558912] ACPI: bus type PNP unregistered
[ 0.563841] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.564124] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.564409] pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
[ 0.564695] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.565262] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.565545] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.565842] pci 0000:00:04.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 0.566397] pci 0000:00:05.0: PCI bridge to [bus 03]
[ 0.566680] pci 0000:00:05.0: bridge window [mem 0xfe200000-0xfe2fffff]
[ 0.566979] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.567294] pci 0000:00:07.0: bridge window [mem 0xfe100000-0xfe1fffff]
[ 0.567581] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 0.567882] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.567884] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.567886] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.567888] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.567890] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.567892] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.567893] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.567895] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.567897] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[ 0.567899] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.567901] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.567903] pci_bus 0000:02: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[ 0.567905] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe2fffff]
[ 0.567907] pci_bus 0000:04: resource 1 [mem 0xfe100000-0xfe1fffff]
[ 0.567909] pci_bus 0000:05: resource 4 [io 0x0000-0x03af]
[ 0.567911] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7]
[ 0.567912] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df]
[ 0.567914] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff]
[ 0.567916] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.567918] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.567919] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.567949] NET: Registered protocol family 2
[ 0.568392] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.569137] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.569649] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.569983] TCP: reno registered
[ 0.570271] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.570600] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.571009] NET: Registered protocol family 1
[ 0.571395] RPC: Registered named UNIX socket transport module.
[ 0.571681] RPC: Registered udp transport module.
[ 0.571971] RPC: Registered tcp transport module.
[ 0.572285] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.826149] pci 0000:01:00.0: Boot video device
[ 0.826397] PCI: CLS 64 bytes, default 64
[ 0.826779] PCI-DMA: Disabling AGP.
[ 0.828732] PCI-DMA: aperture base @ b0000000 size 65536 KB
[ 0.829059] PCI-DMA: using GART IOMMU.
[ 0.829341] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.833386] microcode: CPU0: patch_level=0x010000c8
[ 0.833679] microcode: CPU1: patch_level=0x010000c8
[ 0.834016] microcode: CPU2: patch_level=0x010000c8
[ 0.834305] microcode: CPU3: patch_level=0x010000c8
[ 0.834730] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.835301] LVT offset 1 assigned for vector 0x400
[ 0.835590] IBS: LVT offset 1 assigned
[ 0.835897] perf: AMD IBS detected (0x0000001f)
[ 0.836919] Scanning for low memory corruption every 60 seconds
[ 0.837895] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.844342] audit: initializing netlink subsys (disabled)
[ 0.844640] audit: type=2000 audit(1414245103.522:1): initialized
[ 0.845427] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.851385] NFS: Registering the id_resolver key type
[ 0.851678] Key type id_resolver registered
[ 0.851973] Key type id_legacy registered
[ 0.852418] msgmni has been set to 15805
[ 0.853319] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.853886] io scheduler noop registered
[ 0.854264] io scheduler cfq registered (default)
[ 0.855119] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.855484] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.876375] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.877827] Non-volatile memory driver v1.3
[ 0.878158] Linux agpgart interface v0.103
[ 0.878721] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.879290] ACPI: Power Button [PWRB]
[ 0.879696] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.880230] ACPI: Power Button [PWRF]
[ 0.880773] ACPI: processor limited to max C-state 1
[ 0.881592] [drm] Initialized drm 1.1.0 20060810
[ 0.884387] brd: module loaded
[ 0.885956] loop: module loaded
[ 0.886501] ahci 0000:00:11.0: version 3.0
[ 0.886651] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
[ 0.887195] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.888524] scsi0 : ahci
[ 0.889081] scsi1 : ahci
[ 0.889524] scsi2 : ahci
[ 0.889939] ata1: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b100 irq 19
[ 0.890491] ata2: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b180 irq 19
[ 0.891027] ata3: SATA max UDMA/133 abar m1024@0xfe30b000 port 0xfe30b200 irq 19
[ 0.891793] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.892097] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.892810] r8169 0000:02:00.0: irq 72 for MSI/MSI-X
[ 0.893094] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc90000c76000, 54:a0:50:50:e2:8d, XID 08000800 IRQ 72
[ 0.893622] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.894407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.894691] ehci-pci: EHCI PCI platform driver
[ 0.895070] QUIRK: Enable AMD PLL fix
[ 0.895087] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.895526] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.896066] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.896630] ehci-pci 0000:00:12.2: debug port 1
[ 0.896955] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe309000
[ 0.902932] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.903249] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.903535] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.904101] usb usb1: Product: EHCI Host Controller
[ 0.904383] usb usb1: Manufacturer: Linux 3.14.14-gentoo ehci_hcd
[ 0.904666] usb usb1: SerialNumber: 0000:00:12.2
[ 0.905197] hub 1-0:1.0: USB hub found
[ 0.905482] hub 1-0:1.0: 5 ports detected
[ 0.905954] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.906389] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.906924] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.907488] ehci-pci 0000:00:13.2: debug port 1
[ 0.907796] ehci-pci 0000:00:13.2: irq 21, io mem 0xfe307000
[ 0.913932] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.914244] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.914530] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.915094] usb usb2: Product: EHCI Host Controller
[ 0.915378] usb usb2: Manufacturer: Linux 3.14.14-gentoo ehci_hcd
[ 0.915662] usb usb2: SerialNumber: 0000:00:13.2
[ 0.916194] hub 2-0:1.0: USB hub found
[ 0.916479] hub 2-0:1.0: 5 ports detected
[ 0.916945] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 0.917371] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 0.917903] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.918433] ehci-pci 0000:00:16.2: debug port 1
[ 0.918773] ehci-pci 0000:00:16.2: irq 23, io mem 0xfe304000
[ 0.924935] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 0.925248] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.925533] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.926099] usb usb3: Product: EHCI Host Controller
[ 0.926382] usb usb3: Manufacturer: Linux 3.14.14-gentoo ehci_hcd
[ 0.926666] usb usb3: SerialNumber: 0000:00:16.2
[ 0.927205] hub 3-0:1.0: USB hub found
[ 0.927490] hub 3-0:1.0: 4 ports detected
[ 0.927942] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.928230] ohci-pci: OHCI PCI platform driver
[ 0.928618] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.929026] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 0.929594] ohci-pci 0000:00:12.0: irq 18, io mem 0xfe30a000
[ 0.984995] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.985282] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.985802] usb usb4: Product: OHCI PCI host controller
[ 0.986119] usb usb4: Manufacturer: Linux 3.14.14-gentoo ohci_hcd
[ 0.986402] usb usb4: SerialNumber: 0000:00:12.0
[ 0.986921] hub 4-0:1.0: USB hub found
[ 0.987208] hub 4-0:1.0: 5 ports detected
[ 0.987681] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 0.988092] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.988667] ohci-pci 0000:00:13.0: irq 20, io mem 0xfe308000
[ 1.044006] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.044293] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.044812] usb usb5: Product: OHCI PCI host controller
[ 1.045131] usb usb5: Manufacturer: Linux 3.14.14-gentoo ohci_hcd
[ 1.045415] usb usb5: SerialNumber: 0000:00:13.0
[ 1.045934] hub 5-0:1.0: USB hub found
[ 1.046220] hub 5-0:1.0: 5 ports detected
[ 1.046694] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.047110] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.047677] ohci-pci 0000:00:14.5: irq 18, io mem 0xfe306000
[ 1.103015] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.103301] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.103821] usb usb6: Product: OHCI PCI host controller
[ 1.104141] usb usb6: Manufacturer: Linux 3.14.14-gentoo ohci_hcd
[ 1.104423] usb usb6: SerialNumber: 0000:00:14.5
[ 1.104946] hub 6-0:1.0: USB hub found
[ 1.105266] hub 6-0:1.0: 2 ports detected
[ 1.105678] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.106081] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.106654] ohci-pci 0000:00:16.0: irq 22, io mem 0xfe305000
[ 1.162029] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.162315] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.162835] usb usb7: Product: OHCI PCI host controller
[ 1.163154] usb usb7: Manufacturer: Linux 3.14.14-gentoo ohci_hcd
[ 1.163438] usb usb7: SerialNumber: 0000:00:16.0
[ 1.163952] hub 7-0:1.0: USB hub found
[ 1.164270] hub 7-0:1.0: 4 ports detected
[ 1.164710] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.165134] usbcore: registered new interface driver usblp
[ 1.165510] usbcore: registered new interface driver usb-storage
[ 1.165987] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.166691] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.167001] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.167448] mousedev: PS/2 mouse device common for all mice
[ 1.168048] rtc_cmos 00:04: RTC can wake from S4
[ 1.168469] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.168770] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.169625] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.170252] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.171188] usbcore: registered new interface driver usbhid
[ 1.171471] usbhid: USB HID core driver
[ 1.172099] Netfilter messages via NETLINK v0.30.
[ 1.172390] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.172826] ctnetlink v0.93: registering with nfnetlink.
[ 1.173189] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.173491] TCP: cubic registered
[ 1.173771] Initializing XFRM netlink socket
[ 1.174433] NET: Registered protocol family 10
[ 1.174918] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.175235] sit: IPv6 over IPv4 tunneling driver
[ 1.175800] NET: Registered protocol family 17
[ 1.176117] Key type dns_resolver registered
[ 1.177119] registered taskstats version 1
[ 1.177820] acpi-cpufreq: overriding BIOS provided _PSD data
[ 1.178304] ALSA device list:
[ 1.178582] No soundcards found.
[ 1.207006] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.352017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.358454] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.358762] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.359142] ata2.00: ATA-9: M4-CT128M4SSD2, 000F, max UDMA/100
[ 1.359428] ata2.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.359987] ata3.00: ATA-8: Hitachi HDS721010DLE630, MS2OA5Q0, max UDMA/133
[ 1.360282] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.360921] ata2.00: configured for UDMA/100
[ 1.361413] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL04, max UDMA/100
[ 1.362001] ata3.00: configured for UDMA/133
[ 1.365237] ata1.00: configured for UDMA/100
[ 1.373811] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL04 PQ: 0 ANSI: 5
[ 1.392811] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.393340] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.393860] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.394042] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.394503] scsi 1:0:0:0: Direct-Access ATA M4-CT128M4SSD2 000F PQ: 0 ANSI: 5
[ 1.395336] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.395451] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.395647] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 MS2O PQ: 0 ANSI: 5
[ 1.395914] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.395916] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 1.396019] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.396038] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.396040] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.396084] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.398849] sd 1:0:0:0: [sda] Write Protect is off
[ 1.399162] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.399176] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.400093] sda: sda1 sda2
[ 1.400702] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.418514] sdb: sdb1 sdb2 sdb3
[ 1.419361] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.419659] md: Waiting for all devices to be available before autodetect
[ 1.419996] md: If you don't use raid, use raid=noautodetect
[ 1.420547] md: Autodetecting RAID arrays.
[ 1.420830] md: Scanned 0 and added 0 devices.
[ 1.421159] md: autorun ...
[ 1.421438] md: ... autorun DONE.
[ 1.423159] kjournald starting. Commit interval 5 seconds
[ 1.423192] EXT3-fs (sda2): mounted filesystem with writeback data mode
[ 1.423201] VFS: Mounted root (ext3 filesystem) readonly on device 8:2.
[ 1.423510] devtmpfs: mounted
[ 1.425460] Freeing unused kernel memory: 1036K (ffffffff81ab6000 - ffffffff81bb9000)
[ 1.426033] Write protecting the kernel read-only data: 10240k
[ 1.427805] Freeing unused kernel memory: 524K (ffff88000157d000 - ffff880001600000)
[ 1.433070] Freeing unused kernel memory: 1872K (ffff88000182c000 - ffff880001a00000)
[ 1.442299] usb 1-3: New USB device found, idVendor=046d, idProduct=080f
[ 1.442594] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[ 1.442898] usb 1-3: SerialNumber: 4E498E80
[ 1.474002] kbd_mode (929) used greatest stack depth: 5808 bytes left
[ 1.479402] loadkeys (930) used greatest stack depth: 3920 bytes left
[ 1.479858] init-early.sh (928) used greatest stack depth: 3792 bytes left
[ 1.648071] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.692233] systemd-udevd[1082]: starting version 216
[ 1.697572] random: systemd-udevd urandom read with 92 bits of entropy available
[ 1.757786] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.769924] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.769966] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 1.774649] usb 3-1: New USB device found, idVendor=05e3, idProduct=0745
[ 1.774653] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 1.774656] usb 3-1: Product: USB Storage
[ 1.774658] usb 3-1: SerialNumber: 000000000901
[ 1.775329] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 1.775419] scsi3 : usb-storage 3-1:1.0
[ 1.792118] hda_intel: Disabling MSI
[ 1.793563] kvm: Nested Virtualization enabled
[ 1.793567] kvm: Nested Paging enabled
[ 1.805422] random: nonblocking pool is initialized
[ 1.827278] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 1.827802] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[ 1.827881] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 1.827967] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 1.828866] input:
_________________
Desktop AMD FX-4300 12GB RAM, Asus GF GTX 650. Sound RME Multiface + PCI + Cardbus, 2x RME Quadmic, 1x Behringer ADA8000 + ganz viele Modellflugzeuge, ein Tandem, Rennrad und DFXL ;)
2x IBM Thinkpad T60
Zotag Mag Mini Atom
Raspberry Pi 1 + 2 + Zero W
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Sat Oct 25, 2014 2:08 pm    Post subject: Reply with quote

Zu den Werten würde ich erst mal so sagen, das kannst du bis auf die vom k10-temp komplett in die Tonne treten. Was für ne CPU hast du genau?

Ups, habe gerade gesehen, da ist noch etwas hinzugekommen. Klingt nicht gut.
Back to top
View user's profile Send private message
Erdie
Advocate
Advocate


Joined: 20 May 2004
Posts: 2032
Location: Heidelberg - Germany

PostPosted: Sat Oct 25, 2014 2:43 pm    Post subject: Reply with quote

Oder ich erneuere einfach mal das Netzteil und hoffe der Dinge, die da kommen. Speicher sollte doch ausscheiden, wenn es sowohl mit einem, als auch mit dem anderen Reigel nicht funktioniert.
Oder könnte es doch an der CPU liegen? Evtl, dass die auf die Bretter geht bei bestimmten Funktionen, die erst beim Initialisieren des Xorg gebraucht werden?
_________________
Desktop AMD FX-4300 12GB RAM, Asus GF GTX 650. Sound RME Multiface + PCI + Cardbus, 2x RME Quadmic, 1x Behringer ADA8000 + ganz viele Modellflugzeuge, ein Tandem, Rennrad und DFXL ;)
2x IBM Thinkpad T60
Zotag Mag Mini Atom
Raspberry Pi 1 + 2 + Zero W
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Sat Oct 25, 2014 3:40 pm    Post subject: Reply with quote

Also, ich stecke in deiner Kiste nicht drin. Meine Erfahrungen:
CPU, ja oder nein. Wenn sie geht, dann geht sie, wenn nicht, dann geht gar nichts. Dazwischen kenne ich nichts.
Speicher genauso. Wenn du einen raus nimmst und dann auch gegen den anderen wechselst und es ändert sich nichts, dann ist es nicht der Speicher.
GPU und das Mainboard können wir inzwischen auch ausschließen.
dmesg sieht auch gut aus, also ich hab da jetzt nicht jede Zeile genau geprüft aber so beim Überfliegen wird eigentlich alles erkannt. Das spricht dafür, dass CPU und Board ok sind.
Was hast du für ein Netzteil? Hersteller? Leistung? Wenn du da so nen Chinaböller für 19€ drin hast, das würde einiges erklären.

Will damit nicht sagen, dass ich richtig liege, aber per Ferndiagnose ohne die Kiste unter den Fingern zu haben, sehe ich das halt so.
Back to top
View user's profile Send private message
Erdie
Advocate
Advocate


Joined: 20 May 2004
Posts: 2032
Location: Heidelberg - Germany

PostPosted: Sat Oct 25, 2014 3:49 pm    Post subject: Reply with quote

Netzteil ist ein Coolermaster mit angeblich 450 Watt.
_________________
Desktop AMD FX-4300 12GB RAM, Asus GF GTX 650. Sound RME Multiface + PCI + Cardbus, 2x RME Quadmic, 1x Behringer ADA8000 + ganz viele Modellflugzeuge, ein Tandem, Rennrad und DFXL ;)
2x IBM Thinkpad T60
Zotag Mag Mini Atom
Raspberry Pi 1 + 2 + Zero W
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Sat Oct 25, 2014 3:53 pm    Post subject: Reply with quote

Klingt ja schon mal besser als Chinaböller. Letzte Rettung würde ich jetzt sagen...

Was für eine Grafikkarte hast du da jetzt genau drin und was für eine CPU? Wegen der Leistungsaufnahme. Aber 450 Watt sind erst mal ok für fast alles. Wenn sie denn funktionieren...
Back to top
View user's profile Send private message
Erdie
Advocate
Advocate


Joined: 20 May 2004
Posts: 2032
Location: Heidelberg - Germany

PostPosted: Sat Oct 25, 2014 4:41 pm    Post subject: Reply with quote

Grafikkarte ist eine GTX 650-e mit max. 60W Leistungsaufnahme. CPU ist eine AMD Phenom XII 4Kern mit, wenn ich mich nicht irre, 95 Watt TDP..
_________________
Desktop AMD FX-4300 12GB RAM, Asus GF GTX 650. Sound RME Multiface + PCI + Cardbus, 2x RME Quadmic, 1x Behringer ADA8000 + ganz viele Modellflugzeuge, ein Tandem, Rennrad und DFXL ;)
2x IBM Thinkpad T60
Zotag Mag Mini Atom
Raspberry Pi 1 + 2 + Zero W
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Sat Oct 25, 2014 4:47 pm    Post subject: Reply with quote

Na, ich denke, dass passt schon. Aber jetzt ist Samstag Abend und du stehst da mit dem, was du hast. Und das funktioniert nicht. Scheiße.
Back to top
View user's profile Send private message
Erdie
Advocate
Advocate


Joined: 20 May 2004
Posts: 2032
Location: Heidelberg - Germany

PostPosted: Sat Oct 25, 2014 5:47 pm    Post subject: Reply with quote

Ich werde das Ganze am WE erstmal ad acta legen. Aber da ja nur noch CPU, Speicher und Netzteil zur Debatte stehen, werde ich evtl doch eine neue CPU kaufen, weil wie am billigsten ist (61€) und weil ich mit einfach vorstellen kann, dass es der Speicher ist. Das klingt komisch aber wenn nichts mehr hilft, muß ich eben das unwahrscheinliche als wahrscheinlich annehmen. Die Spannungen wurden alle im BIOS korrekt angezeigt. Jetzt kann es noch sein, dass die erst unter Belastung einbrechen aber wenn dann die CPU nicht war, tausche ich auch noch das Netzteil. Wenn dann immer noch nichst geht, schmeiß ich alles in die Tonne.
_________________
Desktop AMD FX-4300 12GB RAM, Asus GF GTX 650. Sound RME Multiface + PCI + Cardbus, 2x RME Quadmic, 1x Behringer ADA8000 + ganz viele Modellflugzeuge, ein Tandem, Rennrad und DFXL ;)
2x IBM Thinkpad T60
Zotag Mag Mini Atom
Raspberry Pi 1 + 2 + Zero W
Back to top
View user's profile Send private message
Klaus Meier
Advocate
Advocate


Joined: 18 Apr 2005
Posts: 2903
Location: Bozen

PostPosted: Sat Oct 25, 2014 5:57 pm    Post subject: Reply with quote

No. Keine CPU. Wenn schon, dann Netzteil. Und das dann Enermax. Die CPU ist OK. Zu 100%. Jetzt nicht schauen, was am billigsten ist. Und Speicher ist es auch nicht. Speicher ist entweder ganz kaputt dann geht gar nichts mehr oder du hast sporadische Abstürze. Die hast du aber nicht,

Ich bimmelle dich morgen Nachmittag noch mal an. Sag dir dann noch einiges dazu. Jetzt ruhig bleiben.
Back to top
View user's profile Send private message
Jean-Paul
Apprentice
Apprentice


Joined: 13 Apr 2009
Posts: 269

PostPosted: Sat Oct 25, 2014 6:59 pm    Post subject: Reply with quote

Nein, keine neue CPU und auch kein Netzteil. So wie ich das sehe funktioniert alles.

Du solltest erstmal den Kernel neu bauen - z.B. funktioniert dein Sound nicht.
Im Prinzip ist es so wie wenn du die Festplatte mit deinem Gentoo in einen anderen Rechner steckst. Mit Binär-Distries die einen Kernel haben in dem alles eingeschaltet ist funktioniert das, mit Gentoo nicht.

@platinumviper hat die richtige Anleitung geschrieben.
_________________
”Everything should be made as simple as possible, but no simpler.” – Albert Einstein
Back to top
View user's profile Send private message
Erdie
Advocate
Advocate


Joined: 20 May 2004
Posts: 2032
Location: Heidelberg - Germany

PostPosted: Sat Oct 25, 2014 8:41 pm    Post subject: Reply with quote

Jean-Paul wrote:
Nein, keine neue CPU und auch kein Netzteil. So wie ich das sehe funktioniert alles.



Sound funktioniert (wenn er denn hochkommt)

Mir ist noch nicht vorgekommen, dass Softwarefehler manchmal auftreten, und manchmal nicht. Wie ist zu erklären, dass der Rechner manchmal erst gar nicht in das Bios kommt , machmal mit Kernel Panic hochkommt, machmal ohne Kernel Panic aber mit Desktop, er dann sofort einfriert sobald firefox gestartet wird usw? Alles völlig unsystematisch! Am meisten kommt es zu Fehlern, wenn er wärmer ist und wenn der Speicher nicht runtergetaktet ist.
Und genauso sah es aus, bevor ich irgendetwas an der Hardware geändert hatte und zwar unmotiviert ohne World Update oder ähniches. Irgendwann kam es einfach.

Das kann einfach kein reines Software - basiertes Problem sein.

Oder wie stellst Du Dir vor, dass noch nicht einmal das BIOS startet und wenn der Rechner ne Weile rumgestanden hat, dann wieder doch?
_________________
Desktop AMD FX-4300 12GB RAM, Asus GF GTX 650. Sound RME Multiface + PCI + Cardbus, 2x RME Quadmic, 1x Behringer ADA8000 + ganz viele Modellflugzeuge, ein Tandem, Rennrad und DFXL ;)
2x IBM Thinkpad T60
Zotag Mag Mini Atom
Raspberry Pi 1 + 2 + Zero W
Back to top
View user's profile Send private message
Jean-Paul
Apprentice
Apprentice


Joined: 13 Apr 2009
Posts: 269

PostPosted: Sun Oct 26, 2014 11:10 am    Post subject: Reply with quote

Erdie wrote:
Oder wie stellst Du Dir vor, dass noch nicht einmal das BIOS startet und wenn der Rechner ne Weile rumgestanden hat, dann wieder doch?

Das deutet eigentlich auf ein Mainboard Problem hin. Du kannst versuchsweise mal für 15 Minuten die Batterie entfernen. Oder gleich ersetzten, wer weiß wie lange das Mainboard im Lager gelegen hat.

Nach dem dmesg zu urteilen das du gepostet hast, wird sowohl deine CPU als auch deine 8GB RAM erkannt. Von daher würde ich diese Komponenten erstmal ausschließen. Bleibt Mainboard und Netzteil. Wie du sagst hat das neue Mainboard das selbe Verhalten wie das Alte (manchmal geht's manchmal nicht), was dann auf das Netzteil schließen läßt.
Das Problem ist, dass Hardwarefehler oft schwer zu lokalisieren sind.

Und ja, auch Software kann schon ein merkwürdiges Verhalten hervorrufen.
_________________
”Everything should be made as simple as possible, but no simpler.” – Albert Einstein
Back to top
View user's profile Send private message
Child_of_Sun_24
Guru
Guru


Joined: 28 Jul 2004
Posts: 454

PostPosted: Fri Oct 31, 2014 7:21 pm    Post subject: Reply with quote

Hehe, da werden erinnerungen wach, hatte mal ein Problem mit der Festplatte, dachte ok ist sie halt kaputt, tauscht du sie aus und gut ist, bis die zweite innerhalb von zwei Tagen die selben Fehler hatte, lag am Netzteil das Fehlerhafte Spannungen geliefert hatte, ohne Oszilloskop kann man so etwas aber nicht feststellen da im Bios auch nicht alle Werte angezeigt werden.

Den Speicher solltest du mal mit memtest86+ testen, am besten 12-16 Std., wenn da keine Fehler auftreten ist der in Ordnung.

Die CPU könntest du mit Prime95 überprüfen (Am besten bootest du dazu nur in die Konsole gibt im pentoo Overlay ein ebuild mit dem namen sci-mathematics/gimps läuft auch in der Console ohne Grafische ausgabe.

Das Netzteil könntest du am besten von einem Fachmann mal durchmessen lassen, wie ich schon sagte die Bios Werte allein sind nicht zuverlässig genug.

Wie alt ist das Netzteil denn schon ?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Goto page Previous  1, 2
Page 2 of 2

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum