Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Solved] Lenovo Z500 Backlight not working
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
DanTac
n00b
n00b


Joined: 23 Dec 2014
Posts: 3

PostPosted: Tue Dec 23, 2014 8:07 pm    Post subject: [Solved] Lenovo Z500 Backlight not working Reply with quote

Hello,
I'm having a hard time trying to get the backlight control on my Lenovo Z500 Notebook working, unfortunately I wasn't lucky thus far. So I hope you guys might help me out here.

First of all, my Notebook has a dual GPU, intel and nvidia, as follows the lspci output:

Code:
00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM76 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 3D controller: NVIDIA Corporation GK208M [GeForce GT 740M] (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)


I'm using the nouveau driver for the nvidia card.


I have a /sys/class/backlight/intel_backlight folder where I can write into the brightness file. However, changing the brightness' file value doesn't change the actual screen brightness. There are no other subfolders in /sys/class/backlight.

I've tried booting with acpi_backlight=vendor and acpi_osi=linux parameters, nothing changed.

grep BACKLIGHT /boot/config lists the following output:

Code:
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_FB_BACKLIGHT=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set


My dmesg:

Code:
[    4.712718] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[    4.713114] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    4.713212] audit: initializing netlink subsys (disabled)
[    4.713281] audit: type=2000 audit(1419356841.700:1): initialized
[    4.713722] VFS: Disk quotas dquot_6.5.2
[    4.713792] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.714039] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.714141] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    4.714465] ocfs2: Registered cluster interface o2cb
[    4.714550] OCFS2 User DLM kernel interface loaded
[    4.714858] gfs2: GFS2 installed
[    4.714917] msgmni has been set to 15707
[    4.715198] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    4.715261] io scheduler noop registered
[    4.715317] io scheduler deadline registered
[    4.715387] io scheduler cfq registered (default)
[    4.715589] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    4.715891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.716269] Linux agpgart interface v0.103
[    4.716425] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    4.716541] ACPI: AC Adapter [ACAD] (off-line)
[    4.716661] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0
[    4.716736] ACPI: Power Button [PWRB]
[    4.716838] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    4.716915] ACPI: Lid Switch [LID0]
[    4.717006] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    4.717066] ACPI: Power Button [PWRF]
[    4.717440] Monitor-Mwait will be used to enter C-1 state
[    4.717451] Monitor-Mwait will be used to enter C-2 state
[    4.717459] Monitor-Mwait will be used to enter C-3 state
[    4.717474] ACPI: acpi_idle registered with cpuidle
[    4.720439] thermal LNXTHERM:00: registered as thermal_zone0
[    4.720533] ACPI: Thermal Zone [TZ00] (45 C)
[    4.720605] [drm] Initialized drm 1.1.0 20060810
[    4.720923] [drm] Memory usable by graphics device = 2048M
[    4.720980] [drm] Replacing VGA console driver
[    4.721897] Console: switching to colour dummy device 80x25
[    4.772947] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    4.772956] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.772959] [drm] Driver supports precise vblank timestamp query.
[    4.773040] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.824436] fbcon: inteldrmfb (fb0) is primary device
[    4.853051] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[    4.853055] ACPI: Battery Slot [BAT1] (battery present)
[    5.222563] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[    5.222565] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[    5.607096] Console: switching to colour frame buffer device 170x48
[    5.610518] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.610541] i915 0000:00:02.0: registered panic notifier
[    5.643720] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[    5.643911] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[    5.643994] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input3
[    5.674159] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.674284] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input4
[    5.674346] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.674428] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    5.674552] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    5.674672] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[    5.674866] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[    5.674906] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[    5.675123] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x108120a1
[    5.675147] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK208 (NV108)
[    5.675170] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[    5.675203] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    5.675236] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    5.676320] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    5.677457] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    5.678532] nouveau  [   VBIOS][0000:01:00.0] checking ACPI for image...
[    5.713524] tsc: Refined TSC clocksource calibration: 2594.107 MHz
[    6.004072] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    6.714307] Switched to clocksource tsc
[   10.236639] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[   10.237701] nouveau  [   VBIOS][0000:01:00.0] using image from ACPI
[   10.238860] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[   10.239889] nouveau  [   VBIOS][0000:01:00.0] version 80.28.22.00.14
[   10.241257] nouveau  [ DEVINIT][0000:01:00.0] adaptor not initialised
[   10.242266] nouveau  [   VBIOS][0000:01:00.0] running init tables
[   10.306504] nouveau 0000:01:00.0: irq 42 for MSI/MSI-X
[   10.306514] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[   10.307524] nouveau  [     PFB][0000:01:00.0] RAM type: DDR3
[   10.308737] nouveau  [     PFB][0000:01:00.0] RAM size: 1024 MiB
[   10.309931] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[   10.311176] nouveau E[   PIBUS][0000:01:00.0] GPC0: 0x4188ac 0x00000001 (0x1c70822e)
[   10.312472] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 600000uv
[   10.341227] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[   10.342185] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[   10.343132] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[   10.344081] nouveau  [     CLK][0000:01:00.0] 07: core 405 MHz memory 810 MHz
[   10.345084] nouveau  [     CLK][0000:01:00.0] 0a: core 405-1058 MHz memory 1620 MHz
[   10.346090] nouveau  [     CLK][0000:01:00.0] 0f: core 405-1058 MHz memory 2002 MHz
[   10.347048] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz
[   10.358425] vga_switcheroo: enabled
[   10.359399] [TTM] Zone  kernel: Available graphics memory: 4021196 kiB
[   10.360257] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   10.361088] [TTM] Initializing pool allocator
[   10.361903] [TTM] Initializing DMA pool allocator
[   10.362716] nouveau  [     DRM] VRAM: 1024 MiB
[   10.363521] nouveau  [     DRM] GART: 1048576 MiB
[   10.364315] nouveau E[     DRM] Pointer to TMDS table invalid
[   10.365102] nouveau  [     DRM] DCB version 4.0
[   10.365864] nouveau E[     DRM] Pointer to flat panel table invalid
[   10.372028] nouveau  [     DRM] MM: using COPY for buffer copies
[   10.372764] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 1
[   10.374504] brd: module loaded
[   10.375688] loop: module loaded
[   10.376434] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[   10.392893] serio: i8042 KBD port at 0x60,0x64 irq 1
[   10.393575] serio: i8042 AUX port at 0x60,0x64 irq 12
[   10.394353] mousedev: PS/2 mouse device common for all mice
[   10.395349] hidraw: raw HID events driver (C) Jiri Kosina
[   10.396071] TCP: cubic registered
[   10.396733] NET: Registered protocol family 17
[   10.397703] registered taskstats version 1
[   10.398774] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   10.400504] Freeing unused kernel memory: 824K (ffffffff8187f000 - ffffffff8194d000)
[   10.411752] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[   10.455387] libata version 3.00 loaded.
[   10.547230] ahci 0000:00:1f.2: version 3.0
[   10.547349] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[   10.566787] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x6 impl SATA mode
[   10.566790] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[   10.587414] scsi0 : ahci
[   10.587523] scsi1 : ahci
[   10.587647] scsi2 : ahci
[   10.587718] scsi3 : ahci
[   10.587804] scsi4 : ahci
[   10.587883] scsi5 : ahci
[   10.587942] ata1: DUMMY
[   10.587946] ata2: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617180 irq 43
[   10.587950] ata3: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617200 irq 43
[   10.587951] ata4: DUMMY
[   10.587952] ata5: DUMMY
[   10.587953] ata6: DUMMY
[   10.936978] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   10.937075] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   10.938905] ata2.00: supports DRM functions and may not be fully accessible
[   10.938956] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[   10.938957] ata2.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0BB6Q, max UDMA/133
[   10.938959] ata2.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[   10.939166] ata2.00: supports DRM functions and may not be fully accessible
[   10.939225] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[   10.939228] ata2.00: configured for UDMA/133
[   10.941797] ata3.00: ATAPI: PLDS    DVD-RW DU8A5SH, NL61, max UDMA/100
[   10.942591] ata3.00: configured for UDMA/100
[   10.957146] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 840  BB6Q PQ: 0 ANSI: 5
[   10.957521] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[   10.957591] sd 1:0:0:0: [sda] Write Protect is off
[   10.957594] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   10.957609] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   10.958572]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[   10.958982] sd 1:0:0:0: [sda] Attached SCSI disk
[   10.964398] scsi 2:0:0:0: CD-ROM            PLDS     DVD-RW DU8A5SH   NL61 PQ: 0 ANSI: 5
[   10.983337] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   10.983341] cdrom: Uniform CD-ROM driver Revision: 3.20
[   10.983507] sr 2:0:0:0: Attached scsi CD-ROM sr0
[   10.998827] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   10.998865] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   11.030776] scsi: <fdomain> Detection failed (no card)
[   11.068367] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[   11.109839] imm: Version 2.05 (for Linux 2.4.0)
[   11.167945] Fusion MPT base driver 3.04.20
[   11.167946] Copyright (c) 1999-2008 LSI Corporation
[   11.170603] Fusion MPT SPI Host driver 3.04.20
[   11.172396] Fusion MPT FC Host driver 3.04.20
[   11.174194] Fusion MPT SAS Host driver 3.04.20
[   11.175451] 3ware Storage Controller device driver for Linux v1.26.02.003.
[   11.177622] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[   11.181944] HP CISS Driver (v 3.6.26)
[   11.188821] Adaptec aacraid driver 1.2-0[30300]-ms
[   11.191263] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[   11.191456] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[   11.193666] megasas: 06.803.01.00-rc1 Mon. Mar. 10 17:00:00 PDT 2014
[   11.195730] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.08-k.
[   11.202733] Emulex LightPulse Fibre Channel SCSI driver 10.2.8001.0.
[   11.202734] Copyright(c) 2004-2014 Emulex.  All rights reserved.
[   11.205876] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[   11.213293] ACPI: bus type USB registered
[   11.213318] usbcore: registered new interface driver usbfs
[   11.213327] usbcore: registered new interface driver hub
[   11.213352] usbcore: registered new device driver usb
[   11.213618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.213726] ehci-pci: EHCI PCI platform driver
[   11.213854] ehci-pci 0000:00:1a.0: EHCI Host Controller
[   11.213860] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   11.213872] ehci-pci 0000:00:1a.0: debug port 2
[   11.217757] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[   11.217773] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd3619000
[   11.237118] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[   11.237332] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   11.237335] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.237336] usb usb1: Product: EHCI Host Controller
[   11.237337] usb usb1: Manufacturer: Linux 3.16.5-gentoo ehci_hcd
[   11.237338] usb usb1: SerialNumber: 0000:00:1a.0
[   11.237527] hub 1-0:1.0: USB hub found
[   11.237545] hub 1-0:1.0: 2 ports detected
[   11.237874] ehci-pci 0000:00:1d.0: EHCI Host Controller
[   11.237880] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[   11.237892] ehci-pci 0000:00:1d.0: debug port 2
[   11.240884] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00, board id: 2334, fw id: 1214756
[   11.241789] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[   11.241803] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd3618000
[   11.257134] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[   11.257254] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   11.257255] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.257256] usb usb2: Product: EHCI Host Controller
[   11.257257] usb usb2: Manufacturer: Linux 3.16.5-gentoo ehci_hcd
[   11.257258] usb usb2: SerialNumber: 0000:00:1d.0
[   11.257398] hub 2-0:1.0: USB hub found
[   11.257408] hub 2-0:1.0: 2 ports detected
[   11.269158] usbcore: registered new interface driver usb-storage
[   11.270947] uhci_hcd: USB Universal Host Controller Interface driver
[   11.272343] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   11.273840] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   11.273846] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[   11.273931] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[   11.273950] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[   11.274034] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[   11.274036] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.274037] usb usb3: Product: xHCI Host Controller
[   11.274038] usb usb3: Manufacturer: Linux 3.16.5-gentoo xhci_hcd
[   11.274039] usb usb3: SerialNumber: 0000:00:14.0
[   11.274157] hub 3-0:1.0: USB hub found
[   11.274168] hub 3-0:1.0: 4 ports detected
[   11.274456] xhci_hcd 0000:00:14.0: xHCI Host Controller
[   11.274460] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[   11.274507] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[   11.274508] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   11.274509] usb usb4: Product: xHCI Host Controller
[   11.274510] usb usb4: Manufacturer: Linux 3.16.5-gentoo xhci_hcd
[   11.274511] usb usb4: SerialNumber: 0000:00:14.0
[   11.274599] hub 4-0:1.0: USB hub found
[   11.274610] hub 4-0:1.0: 4 ports detected
[   11.279661] usbcore: registered new interface driver usbhid
[   11.279663] usbhid: USB HID core driver
[   11.307003] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[   11.324611] led_class: exports duplicate symbol led_classdev_register (owned by kernel)
[   11.376951] device-mapper: uevent: version 1.0.3
[   11.377005] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[   11.393227] md: raid0 personality registered for level 0
[   11.394669] md: raid1 personality registered for level 1
[   11.557301] raid6: sse2x1    7997 MB/s
[   11.557319] usb 1-1: new high-speed USB device number 2 using ehci-pci
[   11.707778] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[   11.707779] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.708041] hub 1-1:1.0: USB hub found
[   11.708131] hub 1-1:1.0: 6 ports detected
[   11.727414] raid6: sse2x2   10049 MB/s
[   11.827491] usb 2-1: new high-speed USB device number 2 using ehci-pci
[   11.897525] raid6: sse2x4   11676 MB/s
[   11.897527] raid6: using algorithm sse2x4 (11676 MB/s)
[   11.897528] raid6: using ssse3x2 recovery algorithm
[   11.897736] async_tx: api initialized (async)
[   11.897849] xor: automatically using best checksumming function:
[   11.977931] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[   11.977933] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   11.978098] hub 2-1:1.0: USB hub found
[   11.978180] hub 2-1:1.0: 6 ports detected
[   11.997585]    avx       : 22662.400 MB/sec
[   11.998407] md: raid6 personality registered for level 6
[   11.998408] md: raid5 personality registered for level 5
[   11.998409] md: raid4 personality registered for level 4
[   12.006202] md: raid10 personality registered for level 10
[   12.007481] md: linear personality registered for level -1
[   12.008750] md: multipath personality registered for level -4
[   12.026543] JFS: nTxBlock = 8192, nTxLock = 65536
[   12.031008] RPC: Registered named UNIX socket transport module.
[   12.031009] RPC: Registered udp transport module.
[   12.031010] RPC: Registered tcp transport module.
[   12.031010] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.040936] fuse init (API version 7.23)
[   12.044075] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   12.044076] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   12.046113] pps_core: LinuxPPS API ver. 1 registered
[   12.046114] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   12.046306] PTP clock support registered
[   12.050236] Loading iSCSI transport class v2.0-870.
[   12.097731] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[   12.172052] EXT3-fs (sda6): error: couldn't mount because of unsupported optional features (240)
[   12.172119] EXT2-fs (sda6): error: couldn't mount because of unsupported optional features (240)
[   12.174035] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[   12.332659] usb 3-4: New USB device found, idVendor=13d3, idProduct=5170
[   12.332661] usb 3-4: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[   12.332663] usb 3-4: Product: Lenovo EasyCamera
[   12.332664] usb 3-4: Manufacturer: Azurewave
[   12.332665] usb 3-4: SerialNumber: NULL
[   12.428006] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[   12.432495] systemd-udevd[1947]: starting version 216
[   12.435517] random: systemd-udevd urandom read with 77 bits of entropy available
[   12.474622] rtc_cmos 00:01: RTC can wake from S4
[   12.474889] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[   12.474918] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[   12.517806] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   12.518153] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[   12.518157] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   12.525678] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   12.525687] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.525920] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[   12.526086] r8169 0000:02:00.0 eth0: RTL8105e at 0xffffc900045fe000, 20:89:84:e4:bf:48, XID 00c00000 IRQ 45
[   12.537016] cfg80211: Calling CRDA to update world regulatory domain
[   12.537829] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   12.542446] usb 1-1.3: New USB device found, idVendor=8087, idProduct=07da
[   12.542449] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   12.551605] Intel(R) Wireless WiFi driver for Linux, in-tree:
[   12.551606] Copyright(c) 2003- 2014 Intel Corporation
[   12.551759] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[   12.551885] iwlwifi 0000:03:00.0: irq 47 for MSI/MSI-X
[   12.557167] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   12.557170] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.557172] sound hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   12.557174] sound hdaudioC0D0:    mono: mono_out=0x0
[   12.557175] sound hdaudioC0D0:    inputs:
[   12.557177] sound hdaudioC0D0:      Mic=0x18
[   12.557179] sound hdaudioC0D0:      Internal Mic=0x12
[   12.560778] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[   12.562254] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[   12.562279] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[   12.562294] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[   12.562307] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[   12.562601] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   12.565074] nvidia: module license 'NVIDIA' taints kernel.
[   12.565076] Disabling lock debugging due to kernel taint
[   12.568088] sound hdaudioC0D3: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[   12.568090] sound hdaudioC0D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.568091] sound hdaudioC0D3:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   12.568092] sound hdaudioC0D3:    mono: mono_out=0x0
[   12.568093] sound hdaudioC0D3:    dig-out=0x5/0x0
[   12.568094] sound hdaudioC0D3:    inputs:
[   12.588126] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[   12.588128] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[   12.588130] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[   12.588131] NVRM: No NVIDIA graphics adapter probed!
[   12.588132] [drm] Module unloaded
[   12.588226] NVRM: NVIDIA init module failed!
[   12.589436] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[   12.589438] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[   12.589439] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[   12.589442] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[   12.589685] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   12.618358] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[   12.619666] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[   12.698335] systemd-udevd[1970]: renamed network interface eth0 to enp2s0
[   12.698585] cfg80211: World regulatory domain updated:
[   12.698586] cfg80211:  DFS Master region: unset
[   12.698587] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.698590] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.698591] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.698593] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.698594] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.698596] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
[   12.729047] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=0129
[   12.729051] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.729052] usb 1-1.4: Product: USB2.0-CRW
[   12.729054] usb 1-1.4: Manufacturer: Generic
[   12.729055] usb 1-1.4: SerialNumber: 20100201396000000
[   12.768219] systemd-udevd[1976]: renamed network interface wlan0 to wlp3s0
[   12.854599] EXT4-fs (sda6): re-mounted. Opts: discard,data=ordered,commit=600
[   13.581386] random: nonblocking pool is initialized
[   13.690536] Adding 2097148k swap on /dev/sda8.  Priority:-1 extents:1 across:2097148k SS
[   13.730266] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard
[   14.716749] EXT4-fs (sda6): re-mounted. Opts: discard,data=ordered,commit=600
[   14.733773] EXT4-fs (sda7): re-mounted. Opts: discard,commit=600
[   14.920126] r8169 0000:02:00.0: Direct firmware load failed with error -2
[   14.920131] r8169 0000:02:00.0: Falling back to user helper
[   14.920952] r8169 0000:02:00.0 enp2s0: unable to load firmware patch rtl_nic/rtl8105e-1.fw (-12)
[   15.052727] r8169 0000:02:00.0 enp2s0: link down
[   15.263037] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   15.270786] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[   15.519229] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[   15.526967] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[   16.277464] wlp3s0: authenticate with 64:d1:a3:16:ba:2a
[   16.289001] wlp3s0: send auth to 64:d1:a3:16:ba:2a (try 1/3)
[   16.291581] wlp3s0: authenticated
[   16.300486] wlp3s0: associate with 64:d1:a3:16:ba:2a (try 1/3)
[   16.304759] wlp3s0: RX AssocResp from 64:d1:a3:16:ba:2a (capab=0x411 status=0 aid=1)
[   16.311428] wlp3s0: associated
[   21.063555] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[   21.063679] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
[   21.063682] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[  770.205298] usb 1-1.1: new high-speed USB device number 5 using ehci-pci
[  770.488393] usb 1-1.1: New USB device found, idVendor=058f, idProduct=6387
[  770.488398] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  770.488401] usb 1-1.1: Product: Mass Storage
[  770.488404] usb 1-1.1: Manufacturer: USB
[  770.488406] usb 1-1.1: SerialNumber: C1676394
[  770.488940] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[  770.489165] scsi6 : usb-storage 1-1.1:1.0
[  771.487187] scsi 6:0:0:0: Direct-Access     USB      USB 2.0 Flash    8.07 PQ: 0 ANSI: 2
[  771.488054] sd 6:0:0:0: Attached scsi generic sg2 type 0
[  771.489395] sd 6:0:0:0: [sdb] 2050048 512-byte logical blocks: (1.04 GB/1001 MiB)
[  771.490109] sd 6:0:0:0: [sdb] Write Protect is off
[  771.490117] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[  771.490726] sd 6:0:0:0: [sdb] No Caching mode page found
[  771.490731] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[  771.739231]  sdb: sdb1
[  771.742186] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[  788.572795] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.


I'd appreciate any help a lot.


Last edited by DanTac on Sat Dec 27, 2014 8:13 pm; edited 1 time in total
Back to top
View user's profile Send private message
ShanaXXII
Apprentice
Apprentice


Joined: 29 Jun 2014
Posts: 283
Location: Canada

PostPosted: Fri Dec 26, 2014 1:38 pm    Post subject: Reply with quote

There should be another folder besides Intel_backlight.
Something like acpi_video0 or something.
Try changing the brightness value in that folder.
/sys/class/backlight/acpi_video0/*
Back to top
View user's profile Send private message
DanTac
n00b
n00b


Joined: 23 Dec 2014
Posts: 3

PostPosted: Fri Dec 26, 2014 5:01 pm    Post subject: Reply with quote

Hi, thanks for your answer. Unfortunately there are no other subfolders in /sys/class/backlight
Back to top
View user's profile Send private message
DanTac
n00b
n00b


Joined: 23 Dec 2014
Posts: 3

PostPosted: Sat Dec 27, 2014 8:11 pm    Post subject: Reply with quote

I have finally found a solution. The CONFIG_IDEAPAD_LAPTOP driver wasn't built into the kernel. In combination with acpi_backlight=vendor I have a /sys/class/backlight/ideapad folder from where I can control the brightness.
Back to top
View user's profile Send private message
ShanaXXII
Apprentice
Apprentice


Joined: 29 Jun 2014
Posts: 283
Location: Canada

PostPosted: Sat Dec 27, 2014 8:29 pm    Post subject: Reply with quote

Great! :D
Glad you fixed it.
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 7328
Location: Saint Amant, Acadiana

PostPosted: Sat Dec 27, 2014 8:37 pm    Post subject: Reply with quote

Thanks for posting the solution!
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum