Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] SATA errors?
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
pgu
Guru
Guru


Joined: 30 Jul 2009
Posts: 594
Location: Oslo, Norway

PostPosted: Tue Mar 31, 2015 10:35 am    Post subject: [SOLVED] SATA errors? Reply with quote

I've experienced lots of pauses in my shells/editors lately. I suspect it's related to these messages

Code:
[7412759.551236] ata4: hard resetting link
[7412762.509573] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[7412762.574223] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[7412762.574227] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88080f050d70), AE_NOT_FOUND (20140724/psparse-536)
[7412762.575194] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[7412762.575202] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88080f050d70), AE_NOT_FOUND (20140724/psparse-536)
[7412762.575533] ata4.00: configured for UDMA/133
[7412762.575538] ata4.00: retrying FLUSH 0xea Emask 0x4
[7412762.575708] ata4.00: device reported invalid CHS sector 0
[7412762.575713] ata4: EH complete


Are these hard SATA errors, or are they related to ACPI or file system problems?

My /proc/mdstat does not give any indication of faulty drives.


Last edited by pgu on Fri Apr 03, 2015 6:36 am; edited 1 time in total
Back to top
View user's profile Send private message
roarinelk
Guru
Guru


Joined: 04 Mar 2004
Posts: 501

PostPosted: Tue Mar 31, 2015 11:26 am    Post subject: Re: SATA errors? Reply with quote

pgu wrote:
I've experienced lots of pauses in my shells/editors lately. I suspect it's related to these messages

Code:

[7412762.575708] ata4.00: device reported invalid CHS sector 0


This looks like a broken or dying drive. Back up your data and replace it!
Back to top
View user's profile Send private message
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7071

PostPosted: Tue Mar 31, 2015 1:30 pm    Post subject: Re: SATA errors? Reply with quote

pgu wrote:
My /proc/mdstat does not give any indication of faulty drives.

You can lookup what drive it is, as it will gave you its name in dmesg
Code:
dmesg | grep "ata4.00"

You can get also this kind of error on faulty configure controller (like ahci turn into ide mode) or bad cable.
So check your cable and make sure controller is setup as before.
Back to top
View user's profile Send private message
pgu
Guru
Guru


Joined: 30 Jul 2009
Posts: 594
Location: Oslo, Norway

PostPosted: Tue Mar 31, 2015 2:33 pm    Post subject: Reply with quote

I was suspecting a faulty drive, but previously the raid has discovered the faulty drive and marked it as bad in /proc/mdstat.

The dmesg log contains nothing but messages like the ones I posted above.
Back to top
View user's profile Send private message
pgu
Guru
Guru


Joined: 30 Jul 2009
Posts: 594
Location: Oslo, Norway

PostPosted: Tue Mar 31, 2015 3:03 pm    Post subject: Reply with quote

How can I emerge smartctl?
Back to top
View user's profile Send private message
pgu
Guru
Guru


Joined: 30 Jul 2009
Posts: 594
Location: Oslo, Norway

PostPosted: Tue Mar 31, 2015 3:08 pm    Post subject: Reply with quote

Seem to be sys-apps/smartmontools
Back to top
View user's profile Send private message
pgu
Guru
Guru


Joined: 30 Jul 2009
Posts: 594
Location: Oslo, Norway

PostPosted: Tue Mar 31, 2015 5:55 pm    Post subject: Reply with quote

One of the drives results in:

Code:
Read SMART Data failed: scsi error aborted command

=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error aborted command
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.


So at least I have the serial number from smartctl.
Back to top
View user's profile Send private message
pgu
Guru
Guru


Joined: 30 Jul 2009
Posts: 594
Location: Oslo, Norway

PostPosted: Thu Apr 02, 2015 6:47 pm    Post subject: Reply with quote

I replaced the drive and smartctl is happy with the new drive. The raid will take several hours to rebuild.

What's different from previous failures is that mdadm did not marke the drive as bad.

I still have errors like these:

Code:
[    0.833096] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
[    0.833627] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff88080f04ee60), AE_NOT_FOUND (20140926/psparse-536)
[    0.834239] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
[    0.834779] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT3._GTF] (Node ffff88080f04ed70), AE_NOT_FOUND (20140926/psparse-536)
[    0.835365] ata6.00: configured for UDMA/133
[    0.835617] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
[    0.836158] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff88080f04ec08), AE_NOT_FOUND (20140926/psparse-536)
[    0.836762] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359)
[    0.837295] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT4._GTF] (Node ffff88080f04ede8), AE_NOT_FOUND (20140926/psparse-536)
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum