Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Brother MFC 5890CN - device descripter read/64 [solved]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
ChrisJumper
Advocate
Advocate


Joined: 12 Mar 2005
Posts: 2224
Location: Germany

PostPosted: Sun Jun 21, 2015 10:58 am    Post subject: Brother MFC 5890CN - device descripter read/64 [solved] Reply with quote

Hello together,
actually i have a malfunction with my brother-MFC-5890CN printer after upgrading to Kernel 4.0.0 and 4.0.5:

Quote:
1073.392845] scsi 12:0:0:0: Direct-Access Brother MFC-5890CN 1.00 PQ: 0 ANSI: 2
[ 1073.394468] sd 12:0:0:0: Attached scsi generic sg3 type 0
[ 1073.452447] sd 12:0:0:0: [sdc] Attached SCSI removable disk
[ 1114.327483] usb 2-4: USB disconnect, device number 11
[ 1114.734026] usb 6-2: new full-speed USB device number 14 using uhci_hcd
[ 1114.848012] usb 6-2: device descriptor read/64, error -71
[ 1115.062016] usb 6-2: device descriptor read/64, error -71
[ 1115.265012] usb 6-2: new full-speed USB device number 15 using uhci_hcd
[ 1115.580016] usb 6-2: device descriptor read/64, error -71
[ 1115.995017] usb 6-2: device descriptor read/64, error -71
[ 1116.198016] usb 6-2: new full-speed USB device number 16 using uhci_hcd
[ 1116.607013] usb 6-2: device not accepting address 16, error -71
[ 1116.910016] usb 6-2: new full-speed USB device number 17 using uhci_hcd
[ 1117.319008] usb 6-2: device not accepting address 17, error -71
[ 1117.319019] usb usb6-port2: unable to enumerate USB device


The Error comes every time i try to print. If i pull and replug the printers power plug, it seems to work as normal. Till i print a new document.

First i thought it could it be a electrical bypass or electrostatic charge, but the printer and computer itself have a grounding through the power supply.

After some searching about the error and printer itself i found someone who propose irqpolling as Kernel option. Which did not solve the issue for me.

Try to use different usb-Ports did not help.
Back to top
View user's profile Send private message
ChrisJumper
Advocate
Advocate


Joined: 12 Mar 2005
Posts: 2224
Location: Germany

PostPosted: Mon Jun 22, 2015 11:06 am    Post subject: Reply with quote

I am not sure if the issue is solved because in the past it came and gos randomly.

1. I compiled Kernel 3.18.11 and went backwards. Malfunction was still there.
2. So i unplugged the Printer for more then a minute. Changed the USB-Cable (i done that before too but that did not solved the issue) back from the 2 meter hama brand to the original 1m cable. But don't plugged it into the Computer.
3. Pluged in the Printer Power supply.
4. Switched the USB-Mouse to the USB Port where the Printer was before.
5. Plug the Printer in that quondam USB-Port, which was used by the Mouse.

Yeeha - It worked like before.

The other Tips like unbind or bind over /sys/bus/pci/drivers/ehci-pci/ didn`t chance the result before.

Edit: spelling


Last edited by ChrisJumper on Mon Jun 22, 2015 6:30 pm; edited 1 time in total
Back to top
View user's profile Send private message
charles17
Advocate
Advocate


Joined: 02 Mar 2008
Posts: 2613

PostPosted: Mon Jun 22, 2015 1:12 pm    Post subject: Reply with quote

Are you having the latest printer driver (03/12/2014)?
Anyway, you should get rid of the USB trouble if the printer were connected via network.
Back to top
View user's profile Send private message
ChrisJumper
Advocate
Advocate


Joined: 12 Mar 2005
Posts: 2224
Location: Germany

PostPosted: Mon Jun 22, 2015 6:26 pm    Post subject: Reply with quote

I am still using the drivers from 2008 LPR 1.1.2-2, the Driver Install Tool from 03/12/2014 seems to be a Skript which don't contain the driver itself.

LPR-Printer 1,82 MB
Cups-Wrapper 0,01 MB
Driver Install Tool 0,02 MB

I think i will not have a Printer in my Network, where i can not update or secure the System itself.

Thank you for this advice.

I rebooted twice and the System still works. Use the Kernel 3.18.11. If the error appear again I'll be back.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum