Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED]Not working 3G modem ZTE MF192+ (MF652)
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Oschtan
n00b
n00b


Joined: 27 Dec 2008
Posts: 66
Location: Russia, Novosibirsk

PostPosted: Sun Aug 30, 2015 3:56 am    Post subject: [SOLVED]Not working 3G modem ZTE MF192+ (MF652) Reply with quote

kernel 3.18.6
Code:
lsusb
Bus 001 Device 010: ID 19d2:1218 ZTE WCDMA Technologies MSM MF652

messages
Code:
kernel: usb 1-1: new high-speed USB device number 5 using ehci-pci
kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1216
kernel: usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
kernel: usb 1-1: Product: MF192+
kernel: usb 1-1: Manufacturer: ZTE
kernel: usb 1-1: SerialNumber: 42E621180E4317FEF62E21D98F7AD69103D16078
kernel: usb-storage 1-1:1.0: USB Mass Storage device detected
kernel: scsi host4: usb-storage 1-1:1.0
mtp-probe[5405]: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1"
mtp-probe[5405]: bus: 1, device: 5 was not an MTP device
kernel: scsi 4:0:0:0: CD-ROM            ZTE      Datacard CD-ROM  0001 PQ: 0 ANSI: 0
kernel: scsi 4:0:0:0: Attached scsi generic sg1 type 5
usb_modeswitch[5442]: switch device 19d2:1216 on 001/005
kernel: usb 1-1: USB disconnect, device number 5
cron[5467]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons)
kernel: usb 1-1: new high-speed USB device number 6 using ehci-pci
kernel: usb 1-1: New USB device found, idVendor=19d2, idProduct=1218
kernel: usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3
kernel: usb 1-1: Product: MF192+
kernel: usb 1-1: Manufacturer: ZTE
kernel: usb 1-1: SerialNumber: 42E621180E4317FEF62E21D98F7AD69103D16078
kernel: cdc_acm 1-1:1.1: ttyACM0: USB ACM device
kernel: cdc_acm 1-1:1.3: ttyACM1: USB ACM device
kernel: cdc_acm 1-1:1.5: ttyACM2: USB ACM device
kernel: cdc_acm 1-1:1.7: ttyACM3: USB ACM device
kernel: usb-storage 1-1:1.9: USB Mass Storage device detected
kernel: scsi host5: usb-storage 1-1:1.9
root[5527]: usb_modeswitch: switched to 19d2:1218 on 001/006
kernel: scsi 5:0:0:0: CD-ROM            ZTE      Datacard CD-ROM  0001 PQ: 0 ANSI: 0
kernel: scsi 5:0:0:0: Attached scsi generic sg1 type 5
mtp-probe[5563]: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1"
mtp-probe[5563]: bus: 1, device: 6 was not an MTP device
ModemManager[4049]: <info>  Creating modem with plugin 'ZTE' and '4' ports
ModemManager[4049]: <warn>  Could not grab port (tty/ttyACM2): 'Cannot add port 'tty/ttyACM2', unhandled serial type'
ModemManager[4049]: <info>  Modem for device at '/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1' successfully created
ModemManager[4049]: <warn>  Modem couldn't be initialized: couldn't load current capabilities: Failed to determine modem capabilities.
NetworkManager[4036]: <info>  (ttyACM3): new Broadband device (carrier: UNKNOWN, driver: 'cdc_acm', ifindex: 0)
NetworkManager[4036]: <info>  (ttyACM3): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[4036]: <info>  (ttyACM3): modem state 'unknown'
Back to top
View user's profile Send private message
Oschtan
n00b
n00b


Joined: 27 Dec 2008
Posts: 66
Location: Russia, Novosibirsk

PostPosted: Mon Aug 31, 2015 7:32 am    Post subject: Reply with quote

It should be added file /etc/usb_modeswitch.d/19d2:1216
Code:
########################################################
# ZTE MF192+

DefaultVendor= 0x19d2
DefaultProduct=0x1216

TargetVendor= 0x19d2
TargetProduct= 0x1217

MessageContent="555342430800498200000000000010FF000000000000000000000000000000"

CheckSuccess=20

MessageContent only for ZTE MF192+, not for ZTE MF192!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum