Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
M5A99X EVO - does anyone use this motherboard?
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Oniryczny
Guru
Guru


Joined: 01 Dec 2011
Posts: 388
Location: Poland

PostPosted: Sat Oct 31, 2015 8:36 am    Post subject: M5A99X EVO - does anyone use this motherboard? Reply with quote

Hello

I am seeking users who are using this motherboard with gentoo
I would like to talk about kernel settings to it as I'm poor with compilling kernels :P
_________________
cogito ergo sum
Back to top
View user's profile Send private message
russK
l33t
l33t


Joined: 27 Jun 2006
Posts: 630

PostPosted: Wed Nov 04, 2015 3:57 am    Post subject: Reply with quote

I don't have that motherboard but I have the M5A99FX PRO R2.0, very similar.

I'm lazy and use genkernel. I have been quite happy with the mobo. My attempt to use a 4.2 kernel was miserable, so I'm still on 4.0.5 I have no pressing reason to upgrade at the moment, 4.0.5 has been rock solid. I wouldn't mind getting a leaner .config and initrd but I don't have tons of time to work on it.

Here is my .config if you want a starting point, I suppose much of it may not be necessary: https://bpaste.net/show/ea3f4bf7d7c1


HTH
Back to top
View user's profile Send private message
russK
l33t
l33t


Joined: 27 Jun 2006
Posts: 630

PostPosted: Wed Nov 04, 2015 4:06 am    Post subject: Reply with quote

I should have mentioned I'm using systemd on this box, if you are not you should undo some of these things if you start with that .config: https://wiki.gentoo.org/wiki/Systemd
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Wed Nov 04, 2015 4:56 pm    Post subject: Re: M5A99X EVO - does anyone use this motherboard? Reply with quote

Oniryczny wrote:
Hello

I am seeking users who are using this motherboard with gentoo
I would like to talk about kernel settings to it as I'm poor with compilling kernels :P


Can you list lspci -k output from livecd to check what kernel drivers needed to make your mainboard work? Or use genkernel guide from gentoo wiki...
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
Oniryczny
Guru
Guru


Joined: 01 Dec 2011
Posts: 388
Location: Poland

PostPosted: Thu Nov 05, 2015 8:18 pm    Post subject: Reply with quote

that's the point
I would like not to use genkernel
_________________
cogito ergo sum
Back to top
View user's profile Send private message
charles17
Advocate
Advocate


Joined: 02 Mar 2008
Posts: 2616

PostPosted: Fri Nov 06, 2015 7:31 am    Post subject: Reply with quote

Oniryczny wrote:
that's the point

So what's your output of lspci?
Quote:
# lspci -nnkv
Back to top
View user's profile Send private message
Anon-E-moose
Advocate
Advocate


Joined: 23 May 2008
Posts: 3954
Location: Dallas area

PostPosted: Fri Nov 06, 2015 10:31 am    Post subject: Reply with quote

Like russK I have the M5A99FX (uses the same onboard chips as the evo, if I'm not mistaken)

Any this is a cut down version minus dupes and video cards as that will depend on what you put in your system.

Code:
PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
        Kernel driver in use: pcieport

SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
        Kernel driver in use: ahci

USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
        Kernel driver in use: ohci-pci

USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
        Kernel driver in use: ehci-pci

SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller
        Kernel driver in use: piix4_smbus
        Kernel modules: i2c_piix4

Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
        Kernel driver in use: oss_hdaudio

Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
        Kernel driver in use: k10temp
        Kernel modules: k10temp

Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
        Kernel modules: fam15h_power

Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
        Kernel modules: r8169

USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller
        Kernel driver in use: xhci_hcd

_________________
Asus m5a99fx, FX 8320 - nouveau, oss4, rx550 for qemu passthrough
Acer laptop E5-575, i3-7100u - i965, alsa
---both---
5.0.13 zen kernel, profile 17.0 (no-pie) amd64-no-multilib
gcc 8.2.0, eudev, openrc, openbox, palemoon
Back to top
View user's profile Send private message
Roman_Gruber
Advocate
Advocate


Joined: 03 Oct 2006
Posts: 3806
Location: Austro Bavaria

PostPosted: Fri Nov 06, 2015 10:37 am    Post subject: Reply with quote

Oniryczny wrote:
that's the point
I would like not to use genkernel


Where is the issue?

I used genkernel as a starting point and than adaped the config, because my self generated kernel did not booted at first.

Genkernel is a decent piece of software to get a box working, than you can adapt, clean the config of unneeded config settings and modules.

You may use a kernel seed as an alternative and adapt it than.
Back to top
View user's profile Send private message
TigerJr
Guru
Guru


Joined: 19 Jun 2007
Posts: 509
Location: /dev/x0

PostPosted: Fri Nov 06, 2015 3:29 pm    Post subject: Reply with quote

Quote:
because my self generated kernel did not booted at first


So you think that other people can't make configuration better than you?
_________________

Do not update portage without hotdog!

Xenogentooway?
Back to top
View user's profile Send private message
Oniryczny
Guru
Guru


Joined: 01 Dec 2011
Posts: 388
Location: Poland

PostPosted: Sun Nov 08, 2015 3:10 pm    Post subject: Reply with quote

I did the same
used genkernel and made some checks or unchecks
but in most cases I unchecked an important thing (which I hadn't known) and finished with kernel panic
then another genker finished up with kernel panic again because it was still keeping the old (wrong settings) tho I have genkernel with clean and mrproper (I thought they are helping)
Code:
# lspci -nnkv
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14] (rev 02)
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) [1002:5a14]
   Flags: fast devsel
   Capabilities: [f0] HyperTransport: MSI Mapping Enable+ Fixed+
   Capabilities: [c4] HyperTransport: Slave or Primary Interface
   Capabilities: [40] HyperTransport: Retry Mode
   Capabilities: [54] HyperTransport: UnitID Clumping
   Capabilities: [9c] HyperTransport: #1a
   Capabilities: [70] MSI: Enable- Count=1/4 Maskable- 64bit-

00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a16] (prog-if 00 [Normal decode])
   DeviceName:  Onboard IGD
   Flags: bus master, fast devsel, latency 0, IRQ 24
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   I/O behind bridge: 0000e000-0000efff
   Memory behind bridge: fea00000-feafffff
   Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Root Port (Slot+), MSI 00
   Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
   Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B) [1002:5a14]
   Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Capabilities: [190] Access Control Services
   Kernel driver in use: pcieport

00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0, IRQ 24
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 0000d000-0000dfff
   Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Root Port (Slot+), MSI 00
   Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
   Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a14]
   Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Capabilities: [190] Access Control Services
   Kernel driver in use: pcieport

00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a19] (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0, IRQ 24
   Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
   Memory behind bridge: fe900000-fe9fffff
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Root Port (Slot+), MSI 00
   Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
   Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port E) [1002:5a14]
   Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Capabilities: [190] Access Control Services
   Kernel driver in use: pcieport

00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port F) [1002:5a1a] (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0, IRQ 25
   Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
   I/O behind bridge: 0000c000-0000cfff
   Memory behind bridge: fe800000-fe8fffff
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Root Port (Slot+), MSI 00
   Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
   Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port F) [1002:5a14]
   Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Capabilities: [190] Access Control Services
   Kernel driver in use: pcieport

00:07.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port G) [1002:5a1b] (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0, IRQ 25
   Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
   Memory behind bridge: fe700000-fe7fffff
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Root Port (Slot+), MSI 00
   Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
   Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port G) [1002:5a14]
   Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Capabilities: [190] Access Control Services
   Kernel driver in use: pcieport

00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a1d] (prog-if 00 [Normal decode])
   Flags: bus master, fast devsel, latency 0, IRQ 26
   Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
   I/O behind bridge: 0000b000-0000bfff
   Memory behind bridge: fe600000-fe6fffff
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Root Port (Slot+), MSI 00
   Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit-
   Capabilities: [b0] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A) [1002:5a14]
   Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Capabilities: [190] Access Control Services
   Kernel driver in use: pcieport

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
   Subsystem: ASUSTeK Computer Inc. SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1043:84dd]
   Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
   I/O ports at f040 [size=8]
   I/O ports at f030 [size=4]
   I/O ports at f020 [size=8]
   I/O ports at f010 [size=4]
   I/O ports at f000 [size=16]
   Memory at feb0b000 (32-bit, non-prefetchable) [size=1K]
   Capabilities: [70] SATA HBA v1.0
   Capabilities: [a4] PCI Advanced Features
   Kernel driver in use: ahci
   Kernel modules: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
   Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
   Memory at feb0a000 (32-bit, non-prefetchable) [size=4K]
   Kernel driver in use: ohci-pci
   Kernel modules: ohci_pci

00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
   Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
   Memory at feb09000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [c0] Power Management version 2
   Capabilities: [e4] Debug port: BAR=1 offset=00e0
   Kernel driver in use: ehci-pci
   Kernel modules: ehci_pci

00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
   Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 20
   Memory at feb08000 (32-bit, non-prefetchable) [size=4K]
   Kernel driver in use: ohci-pci
   Kernel modules: ohci_pci

00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
   Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 21
   Memory at feb07000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [c0] Power Management version 2
   Capabilities: [e4] Debug port: BAR=1 offset=00e0
   Kernel driver in use: ehci-pci
   Kernel modules: ehci_pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385]
   Flags: 66MHz, medium devsel
   Kernel driver in use: piix4_smbus
   Kernel modules: i2c_piix4

00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
   Subsystem: ASUSTeK Computer Inc. M4A89GTD PRO/USB3 Motherboard [1043:8410]
   Flags: bus master, slow devsel, latency 32, IRQ 16
   Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 2
   Kernel driver in use: snd_hda_intel
   Kernel modules: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
   Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
   Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
   Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
   I/O behind bridge: 0000a000-0000afff
   Memory behind bridge: fe500000-fe5fffff

00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
   Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
   Memory at feb06000 (32-bit, non-prefetchable) [size=4K]
   Kernel driver in use: ohci-pci
   Kernel modules: ohci_pci

00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
   Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 22
   Memory at feb05000 (32-bit, non-prefetchable) [size=4K]
   Kernel driver in use: ohci-pci
   Kernel modules: ohci_pci

00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
   Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
   Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 23
   Memory at feb04000 (32-bit, non-prefetchable) [size=256]
   Capabilities: [c0] Power Management version 2
   Capabilities: [e4] Debug port: BAR=1 offset=00e0
   Kernel driver in use: ehci-pci
   Kernel modules: ehci_pci

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
   Flags: fast devsel
   Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
   Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
   Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
   Flags: fast devsel
   Capabilities: [f0] Secure device <?>

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
   Flags: fast devsel

00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
   Flags: fast devsel

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde PRO [Radeon HD 7750 / R7 250E] [1002:683f] (prog-if 00 [VGA controller])
   Subsystem: Gigabyte Technology Co., Ltd Cape Verde PRO [Radeon HD 7750 / R7 250E] [1458:2551]
   Flags: bus master, fast devsel, latency 0, IRQ 28
   Memory at c0000000 (64-bit, prefetchable) [size=256M]
   Memory at fea00000 (64-bit, non-prefetchable) [size=256K]
   I/O ports at e000 [size=256]
   Expansion ROM at fea40000 [disabled] [size=128K]
   Capabilities: [48] Vendor Specific Information: Len=08 <?>
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Legacy Endpoint, MSI 00
   Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Capabilities: [150] Advanced Error Reporting
   Capabilities: [270] #19
   Kernel driver in use: radeon

01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [1002:aab0]
   Subsystem: Gigabyte Technology Co., Ltd Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] [1458:aab0]
   Flags: bus master, fast devsel, latency 0, IRQ 50
   Memory at fea60000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [48] Vendor Specific Information: Len=08 <?>
   Capabilities: [50] Power Management version 3
   Capabilities: [58] Express Legacy Endpoint, MSI 00
   Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
   Capabilities: [150] Advanced Error Reporting
   Kernel driver in use: snd_hda_intel
   Kernel modules: snd_hda_intel

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
   Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432]
   Flags: bus master, fast devsel, latency 0, IRQ 33
   I/O ports at d000 [size=256]
   Memory at d0004000 (64-bit, prefetchable) [size=4K]
   Memory at d0000000 (64-bit, prefetchable) [size=16K]
   Capabilities: [40] Power Management version 3
   Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
   Capabilities: [70] Express Endpoint, MSI 01
   Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
   Capabilities: [d0] Vital Product Data
   Capabilities: [100] Advanced Error Reporting
   Capabilities: [140] Virtual Channel
   Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
   Kernel driver in use: r8169
   Kernel modules: r8169

03:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
   Subsystem: ASUSTeK Computer Inc. P8B WS Motherboard [1043:8488]
   Flags: bus master, fast devsel, latency 0, IRQ 31
   Memory at fe900000 (64-bit, non-prefetchable) [size=32K]
   Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
   Capabilities: [68] MSI-X: Enable+ Count=8 Masked-
   Capabilities: [78] Power Management version 3
   Capabilities: [80] Express Legacy Endpoint, MSI 00
   Capabilities: [100] Virtual Channel
   Kernel driver in use: xhci_hcd
   Kernel modules: xhci_pci

04:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362 SATA Controller [197b:2362] (rev 10) (prog-if 01 [AHCI 1.0])
   Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8460]
   Flags: bus master, fast devsel, latency 0, IRQ 29
   I/O ports at c040 [size=8]
   I/O ports at c030 [size=4]
   I/O ports at c020 [size=8]
   I/O ports at c010 [size=4]
   I/O ports at c000 [size=16]
   Memory at fe810000 (32-bit, non-prefetchable) [size=512]
   Capabilities: [8c] Power Management version 3
   Capabilities: [50] Express Legacy Endpoint, MSI 00
   Kernel driver in use: ahci
   Kernel modules: ahci

05:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042] (prog-if 30 [XHCI])
   Subsystem: ASUSTeK Computer Inc. P8B WS Motherboard [1043:8488]
   Flags: bus master, fast devsel, latency 0, IRQ 41
   Memory at fe700000 (64-bit, non-prefetchable) [size=32K]
   Capabilities: [50] MSI: Enable- Count=1/8 Maskable- 64bit+
   Capabilities: [68] MSI-X: Enable+ Count=8 Masked-
   Capabilities: [78] Power Management version 3
   Capabilities: [80] Express Legacy Endpoint, MSI 00
   Capabilities: [100] Virtual Channel
   Kernel driver in use: xhci_hcd
   Kernel modules: xhci_pci

06:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362 SATA Controller [197b:2362] (rev 10) (prog-if 01 [AHCI 1.0])
   Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8460]
   Flags: bus master, fast devsel, latency 0, IRQ 30
   I/O ports at b040 [size=8]
   I/O ports at b030 [size=4]
   I/O ports at b020 [size=8]
   I/O ports at b010 [size=4]
   I/O ports at b000 [size=16]
   Memory at fe610000 (32-bit, non-prefetchable) [size=512]
   Capabilities: [8c] Power Management version 3
   Capabilities: [50] Express Legacy Endpoint, MSI 00
   Kernel driver in use: ahci
   Kernel modules: ahci

07:06.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
   Subsystem: ASUSTeK Computer Inc. Motherboard [1043:81fe]
   Flags: bus master, medium devsel, latency 32, IRQ 11
   Memory at fe500000 (32-bit, non-prefetchable) [size=2K]
   I/O ports at a000 [size=128]
   Capabilities: [50] Power Management version 2

#

_________________
cogito ergo sum
Back to top
View user's profile Send private message
The Doctor
Moderator
Moderator


Joined: 27 Jul 2010
Posts: 2574

PostPosted: Mon Nov 09, 2015 12:53 am    Post subject: Reply with quote

I'm a bit surprised no one said this yet.

Go to Kernel Seeds and simply follow the directions. Unfortunately, Pappy hasn't been making new seeds for a long time, but your default .config should be a good starting point anyway. You should get a solid bootable kernel that you can then tweak as desired.
_________________
First things first, but not necessarily in that order.

Apologies if I take a while to respond. I'm currently working on the dematerialization circuit for my blue box.
Back to top
View user's profile Send private message
Oniryczny
Guru
Guru


Joined: 01 Dec 2011
Posts: 388
Location: Poland

PostPosted: Thu Nov 12, 2015 6:42 pm    Post subject: Reply with quote

Well I found my motherboard on theese seeds
but am I right that I only need to enable those few drivers to work with my board or do I need more?
_________________
cogito ergo sum
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum