Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Windows surface pro 3 wifi interface not found [SOLVED]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
erus
n00b
n00b


Joined: 14 Apr 2012
Posts: 36

PostPosted: Fri Dec 11, 2015 11:05 pm    Post subject: Windows surface pro 3 wifi interface not found [SOLVED] Reply with quote

Hello,

I have a fresh gentoo install, from the system rescue cd everything is working but as soon as I boot to gentoo I have no network interface.

"ifconfig -a" give me only "lo" interface and "ifconfig wlp1s0" up tells me " interface not found ".

I have the same driver in use that I was using in the system rescue cd.

I will get a dmesg as soon as I can.

Thank you


Last edited by erus on Thu Dec 31, 2015 2:33 am; edited 1 time in total
Back to top
View user's profile Send private message
markisthejob
Tux's lil' helper
Tux's lil' helper


Joined: 04 Aug 2008
Posts: 142
Location: Cork, Republic of Ireland

PostPosted: Sat Dec 12, 2015 2:41 am    Post subject: Reply with quote

to check your card/driver start with
Code:
lspci -k

Check to see if you have the right module in your kernel.Which one did you use? I think you might need mwifiex

If it is correct make sure its loaded
Code:
modprobe yourmodule

what is the output of
Code:
dmesg | grep yourmodule
Back to top
View user's profile Send private message
erus
n00b
n00b


Joined: 14 Apr 2012
Posts: 36

PostPosted: Sun Dec 13, 2015 10:19 pm    Post subject: Reply with quote

Code:
lspci -k
       
        00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
   Subsystem: Microsoft Corporation Haswell-ULT DRAM Controller
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
   Subsystem: Microsoft Corporation Haswell-ULT Integrated Graphics Controller
   Kernel driver in use: i915
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
   Subsystem: Intel Corporation Haswell-ULT HD Audio Controller
   Kernel driver in use: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
   Subsystem: Microsoft Corporation 8 Series USB xHCI HC
   Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
   Subsystem: Microsoft Corporation 8 Series HECI
   Kernel driver in use: mei_me
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
   Subsystem: Microsoft Corporation 8 Series HD Audio Controller
   Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
   Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
   Subsystem: Microsoft Corporation 8 Series LPC Controller
   Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
   Subsystem: Microsoft Corporation 8 Series SATA Controller 1 [AHCI mode]
   Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
   Subsystem: Microsoft Corporation 8 Series SMBus Controller
01:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 2b38
   Subsystem: Device 0001:045e
   Kernel driver in use: mwifiex_pcie


My wifi driver is built in, not a module. I don't have any result with
Code:
dmesg | grep mwifiex_pcie


Here is my dmesg
[code:1:cbd4e5b178]
[ 180.455243] -- transfer complete
[ 180.455243] Bulk command transfer result=0
[ 180.455244] xfer 512 bytes, 1 entries
[ 180.455759] Status code 0; transferred 512/512
[ 180.455761] -- transfer complete
[ 180.455762] Bulk data transfer result 0x0
[ 180.455763] Attempting to get CSW...
[ 180.455764] xfer 13 bytes
[ 180.455897] Status code 0; transferred 13/13
[ 180.455900] -- transfer complete
[ 180.455901] Bulk status result = 0
[ 180.455902] Bulk Status S 0x53425355 T 0xbb3 R 0 Stat 0x0
[ 180.455904] scsi cmd done, result=0x0
[ 180.455906] *** thread sleeping
[ 180.455928] *** thread awakened
[ 180.455930] Command READ_10 (10 bytes)
[ 180.455931] bytes:
[ 180.455933] 28 00 06 80 11 0a 00 00 01 00
[ 180.455939] Bulk Command S 0x43425355 T 0xbb4 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.455940] xfer 31 bytes
[ 180.455952] Status code 0; transferred 31/31
[ 180.455954] -- transfer complete
[ 180.455955] Bulk command transfer result=0
[ 180.455957] xfer 512 bytes, 1 entries
[ 180.456449] Status code 0; transferred 512/512
[ 180.456450] -- transfer complete
[ 180.456450] Bulk data transfer result 0x0
[ 180.456451] Attempting to get CSW...
[ 180.456452] xfer 13 bytes
[ 180.456600] Status code 0; transferred 13/13
[ 180.456601] -- transfer complete
[ 180.456602] Bulk status result = 0
[ 180.456604] Bulk Status S 0x53425355 T 0xbb4 R 0 Stat 0x0
[ 180.456605] scsi cmd done, result=0x0
[ 180.456606] *** thread sleeping
[ 180.456625] *** thread awakened
[ 180.456626] Command READ_10 (10 bytes)
[ 180.456627] bytes:
[ 180.456629] 28 00 06 80 11 0b 00 00 01 00
[ 180.456630] Bulk Command S 0x43425355 T 0xbb5 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.456631] xfer 31 bytes
[ 180.456641] Status code 0; transferred 31/31
[ 180.456642] -- transfer complete
[ 180.456643] Bulk command transfer result=0
[ 180.456644] xfer 512 bytes, 1 entries
[ 180.457138] Status code 0; transferred 512/512
[ 180.457140] -- transfer complete
[ 180.457141] Bulk data transfer result 0x0
[ 180.457142] Attempting to get CSW...
[ 180.457144] xfer 13 bytes
[ 180.457289] Status code 0; transferred 13/13
[ 180.457290] -- transfer complete
[ 180.457290] Bulk status result = 0
[ 180.457291] Bulk Status S 0x53425355 T 0xbb5 R 0 Stat 0x0
[ 180.457292] scsi cmd done, result=0x0
[ 180.457293] *** thread sleeping
[ 180.457314] *** thread awakened
[ 180.457315] Command READ_10 (10 bytes)
[ 180.457315] bytes:
[ 180.457318] 28 00 06 80 11 0e 00 00 01 00
[ 180.457319] Bulk Command S 0x43425355 T 0xbb6 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.457320] xfer 31 bytes
[ 180.457330] Status code 0; transferred 31/31
[ 180.457331] -- transfer complete
[ 180.457332] Bulk command transfer result=0
[ 180.457333] xfer 512 bytes, 1 entries
[ 180.457860] Status code 0; transferred 512/512
[ 180.457861] -- transfer complete
[ 180.457862] Bulk data transfer result 0x0
[ 180.457864] Attempting to get CSW...
[ 180.457865] xfer 13 bytes
[ 180.457981] Status code 0; transferred 13/13
[ 180.457982] -- transfer complete
[ 180.457983] Bulk status result = 0
[ 180.457985] Bulk Status S 0x53425355 T 0xbb6 R 0 Stat 0x0
[ 180.457987] scsi cmd done, result=0x0
[ 180.457988] *** thread sleeping
[ 180.458007] *** thread awakened
[ 180.458009] Command READ_10 (10 bytes)
[ 180.458010] bytes:
[ 180.458011] 28 00 06 80 11 10 00 00 01 00
[ 180.458020] Bulk Command S 0x43425355 T 0xbb7 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.458021] xfer 31 bytes
[ 180.458033] Status code 0; transferred 31/31
[ 180.458034] -- transfer complete
[ 180.458036] Bulk command transfer result=0
[ 180.458037] xfer 512 bytes, 1 entries
[ 180.458528] Status code 0; transferred 512/512
[ 180.458529] -- transfer complete
[ 180.458530] Bulk data transfer result 0x0
[ 180.458531] Attempting to get CSW...
[ 180.458532] xfer 13 bytes
[ 180.458678] Status code 0; transferred 13/13
[ 180.458678] -- transfer complete
[ 180.458679] Bulk status result = 0
[ 180.458680] Bulk Status S 0x53425355 T 0xbb7 R 0 Stat 0x0
[ 180.458680] scsi cmd done, result=0x0
[ 180.458682] *** thread sleeping
[ 180.458695] *** thread awakened
[ 180.458696] Command READ_10 (10 bytes)
[ 180.458696] bytes:
[ 180.458704] 28 00 06 80 11 11 00 00 01 00
[ 180.458705] Bulk Command S 0x43425355 T 0xbb8 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.458706] xfer 31 bytes
[ 180.458718] Status code 0; transferred 31/31
[ 180.458719] -- transfer complete
[ 180.458720] Bulk command transfer result=0
[ 180.458722] xfer 512 bytes, 1 entries
[ 180.459218] Status code 0; transferred 512/512
[ 180.459219] -- transfer complete
[ 180.459219] Bulk data transfer result 0x0
[ 180.459220] Attempting to get CSW...
[ 180.459220] xfer 13 bytes
[ 180.459368] Status code 0; transferred 13/13
[ 180.459368] -- transfer complete
[ 180.459369] Bulk status result = 0
[ 180.459370] Bulk Status S 0x53425355 T 0xbb8 R 0 Stat 0x0
[ 180.459370] scsi cmd done, result=0x0
[ 180.459372] *** thread sleeping
[ 180.459385] *** thread awakened
[ 180.459388] Command READ_10 (10 bytes)
[ 180.459389] bytes:
[ 180.459390] 28 00 06 80 11 12 00 00 01 00
[ 180.459395] Bulk Command S 0x43425355 T 0xbb9 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.459396] xfer 31 bytes
[ 180.459411] Status code 0; transferred 31/31
[ 180.459412] -- transfer complete
[ 180.459414] Bulk command transfer result=0
[ 180.459415] xfer 512 bytes, 1 entries
[ 180.459909] Status code 0; transferred 512/512
[ 180.459911] -- transfer complete
[ 180.459913] Bulk data transfer result 0x0
[ 180.459915] Attempting to get CSW...
[ 180.459918] xfer 13 bytes
[ 180.460059] Status code 0; transferred 13/13
[ 180.460059] -- transfer complete
[ 180.460060] Bulk status result = 0
[ 180.460062] Bulk Status S 0x53425355 T 0xbb9 R 0 Stat 0x0
[ 180.460063] scsi cmd done, result=0x0
[ 180.460065] *** thread sleeping
[ 180.460083] *** thread awakened
[ 180.460084] Command READ_10 (10 bytes)
[ 180.460085] bytes:
[ 180.460089] 28 00 06 80 11 13 00 00 01 00
[ 180.460091] Bulk Command S 0x43425355 T 0xbba L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.460092] xfer 31 bytes
[ 180.460105] Status code 0; transferred 31/31
[ 180.460106] -- transfer complete
[ 180.460108] Bulk command transfer result=0
[ 180.460109] xfer 512 bytes, 1 entries
[ 180.460599] Status code 0; transferred 512/512
[ 180.460599] -- transfer complete
[ 180.460600] Bulk data transfer result 0x0
[ 180.460601] Attempting to get CSW...
[ 180.460601] xfer 13 bytes
[ 180.460750] Status code 0; transferred 13/13
[ 180.460750] -- transfer complete
[ 180.460751] Bulk status result = 0
[ 180.460753] Bulk Status S 0x53425355 T 0xbba R 0 Stat 0x0
[ 180.460754] scsi cmd done, result=0x0
[ 180.460755] *** thread sleeping
[ 180.460772] *** thread awakened
[ 180.460773] Command READ_10 (10 bytes)
[ 180.460774] bytes:
[ 180.460776] 28 00 06 80 11 14 00 00 01 00
[ 180.460778] Bulk Command S 0x43425355 T 0xbbb L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.460778] xfer 31 bytes
[ 180.460790] Status code 0; transferred 31/31
[ 180.460791] -- transfer complete
[ 180.460792] Bulk command transfer result=0
[ 180.460792] xfer 512 bytes, 1 entries
[ 180.461289] Status code 0; transferred 512/512
[ 180.461290] -- transfer complete
[ 180.461290] Bulk data transfer result 0x0
[ 180.461291] Attempting to get CSW...
[ 180.461291] xfer 13 bytes
[ 180.461439] Status code 0; transferred 13/13
[ 180.461440] -- transfer complete
[ 180.461441] Bulk status result = 0
[ 180.461442] Bulk Status S 0x53425355 T 0xbbb R 0 Stat 0x0
[ 180.461443] scsi cmd done, result=0x0
[ 180.461445] *** thread sleeping
[ 180.461469] *** thread awakened
[ 180.461470] Command READ_10 (10 bytes)
[ 180.461470] bytes:
[ 180.461472] 28 00 06 80 11 15 00 00 01 00
[ 180.461473] Bulk Command S 0x43425355 T 0xbbc L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.461473] xfer 31 bytes
[ 180.461482] Status code 0; transferred 31/31
[ 180.461483] -- transfer complete
[ 180.461483] Bulk command transfer result=0
[ 180.461484] xfer 512 bytes, 1 entries
[ 180.461978] Status code 0; transferred 512/512
[ 180.461979] -- transfer complete
[ 180.461979] Bulk data transfer result 0x0
[ 180.461980] Attempting to get CSW...
[ 180.461982] xfer 13 bytes
[ 180.462128] Status code 0; transferred 13/13
[ 180.462129] -- transfer complete
[ 180.462129] Bulk status result = 0
[ 180.462130] Bulk Status S 0x53425355 T 0xbbc R 0 Stat 0x0
[ 180.462130] scsi cmd done, result=0x0
[ 180.462131] *** thread sleeping
[ 180.462143] *** thread awakened
[ 180.462144] Command READ_10 (10 bytes)
[ 180.462144] bytes:
[ 180.462146] 28 00 06 80 11 16 00 00 01 00
[ 180.462147] Bulk Command S 0x43425355 T 0xbbd L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.462147] xfer 31 bytes
[ 180.462169] Status code 0; transferred 31/31
[ 180.462170] -- transfer complete
[ 180.462170] Bulk command transfer result=0
[ 180.462171] xfer 512 bytes, 1 entries
[ 180.462687] Status code 0; transferred 512/512
[ 180.462689] -- transfer complete
[ 180.462690] Bulk data transfer result 0x0
[ 180.462691] Attempting to get CSW...
[ 180.462692] xfer 13 bytes
[ 180.462873] Status code 0; transferred 13/13
[ 180.462875] -- transfer complete
[ 180.462877] Bulk status result = 0
[ 180.462878] Bulk Status S 0x53425355 T 0xbbd R 0 Stat 0x0
[ 180.462881] scsi cmd done, result=0x0
[ 180.462883] *** thread sleeping
[ 180.462906] *** thread awakened
[ 180.462909] Command READ_10 (10 bytes)
[ 180.462910] bytes:
[ 180.462912] 28 00 06 80 11 17 00 00 01 00
[ 180.462920] Bulk Command S 0x43425355 T 0xbbe L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.462922] xfer 31 bytes
[ 180.462984] Status code 0; transferred 31/31
[ 180.462985] -- transfer complete
[ 180.462987] Bulk command transfer result=0
[ 180.462989] xfer 512 bytes, 1 entries
[ 180.463430] Status code 0; transferred 512/512
[ 180.463431] -- transfer complete
[ 180.463432] Bulk data transfer result 0x0
[ 180.463433] Attempting to get CSW...
[ 180.463434] xfer 13 bytes
[ 180.463584] Status code 0; transferred 13/13
[ 180.463584] -- transfer complete
[ 180.463585] Bulk status result = 0
[ 180.463586] Bulk Status S 0x53425355 T 0xbbe R 0 Stat 0x0
[ 180.463587] scsi cmd done, result=0x0
[ 180.463589] *** thread sleeping
[ 180.463610] *** thread awakened
[ 180.463611] Command READ_10 (10 bytes)
[ 180.463612] bytes:
[ 180.463614] 28 00 06 80 11 18 00 00 01 00
[ 180.463616] Bulk Command S 0x43425355 T 0xbbf L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.463616] xfer 31 bytes
[ 180.463627] Status code 0; transferred 31/31
[ 180.463627] -- transfer complete
[ 180.463628] Bulk command transfer result=0
[ 180.463629] xfer 512 bytes, 1 entries
[ 180.464130] Status code 0; transferred 512/512
[ 180.464131] -- transfer complete
[ 180.464132] Bulk data transfer result 0x0
[ 180.464132] Attempting to get CSW...
[ 180.464133] xfer 13 bytes
[ 180.464278] Status code 0; transferred 13/13
[ 180.464279] -- transfer complete
[ 180.464279] Bulk status result = 0
[ 180.464280] Bulk Status S 0x53425355 T 0xbbf R 0 Stat 0x0
[ 180.464281] scsi cmd done, result=0x0
[ 180.464282] *** thread sleeping
[ 180.464300] *** thread awakened
[ 180.464302] Command READ_10 (10 bytes)
[ 180.464302] bytes:
[ 180.464305] 28 00 06 80 11 19 00 00 01 00
[ 180.464306] Bulk Command S 0x43425355 T 0xbc0 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.464307] xfer 31 bytes
[ 180.464318] Status code 0; transferred 31/31
[ 180.464319] -- transfer complete
[ 180.464320] Bulk command transfer result=0
[ 180.464321] xfer 512 bytes, 1 entries
[ 180.464846] Status code 0; transferred 512/512
[ 180.464849] -- transfer complete
[ 180.464850] Bulk data transfer result 0x0
[ 180.464853] Attempting to get CSW...
[ 180.464854] xfer 13 bytes
[ 180.464975] Status code 0; transferred 13/13
[ 180.464977] -- transfer complete
[ 180.464978] Bulk status result = 0
[ 180.464979] Bulk Status S 0x53425355 T 0xbc0 R 0 Stat 0x0
[ 180.464981] scsi cmd done, result=0x0
[ 180.464983] *** thread sleeping
[ 180.465002] *** thread awakened
[ 180.465006] Command READ_10 (10 bytes)
[ 180.465008] bytes:
[ 180.465012] 28 00 06 80 11 1a 00 00 01 00
[ 180.465015] Bulk Command S 0x43425355 T 0xbc1 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.465017] xfer 31 bytes
[ 180.465028] Status code 0; transferred 31/31
[ 180.465029] -- transfer complete
[ 180.465030] Bulk command transfer result=0
[ 180.465030] xfer 512 bytes, 1 entries
[ 180.465526] Status code 0; transferred 512/512
[ 180.465529] -- transfer complete
[ 180.465531] Bulk data transfer result 0x0
[ 180.465533] Attempting to get CSW...
[ 180.465535] xfer 13 bytes
[ 180.465677] Status code 0; transferred 13/13
[ 180.465678] -- transfer complete
[ 180.465679] Bulk status result = 0
[ 180.465680] Bulk Status S 0x53425355 T 0xbc1 R 0 Stat 0x0
[ 180.465680] scsi cmd done, result=0x0
[ 180.465682] *** thread sleeping
[ 180.465700] *** thread awakened
[ 180.465701] Command READ_10 (10 bytes)
[ 180.465702] bytes:
[ 180.465704] 28 00 06 80 11 1b 00 00 01 00
[ 180.465705] Bulk Command S 0x43425355 T 0xbc2 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.465706] xfer 31 bytes
[ 180.465717] Status code 0; transferred 31/31
[ 180.465717] -- transfer complete
[ 180.465718] Bulk command transfer result=0
[ 180.465720] xfer 512 bytes, 1 entries
[ 180.466220] Status code 0; transferred 512/512
[ 180.466220] -- transfer complete
[ 180.466221] Bulk data transfer result 0x0
[ 180.466222] Attempting to get CSW...
[ 180.466222] xfer 13 bytes
[ 180.466371] Status code 0; transferred 13/13
[ 180.466371] -- transfer complete
[ 180.466372] Bulk status result = 0
[ 180.466373] Bulk Status S 0x53425355 T 0xbc2 R 0 Stat 0x0
[ 180.466373] scsi cmd done, result=0x0
[ 180.466375] *** thread sleeping
[ 180.466392] *** thread awakened
[ 180.466393] Command READ_10 (10 bytes)
[ 180.466394] bytes:
[ 180.466396] 28 00 06 80 11 1c 00 00 01 00
[ 180.466397] Bulk Command S 0x43425355 T 0xbc3 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.466398] xfer 31 bytes
[ 180.466410] Status code 0; transferred 31/31
[ 180.466411] -- transfer complete
[ 180.466412] Bulk command transfer result=0
[ 180.466412] xfer 512 bytes, 1 entries
[ 180.466915] Status code 0; transferred 512/512
[ 180.466916] -- transfer complete
[ 180.466917] Bulk data transfer result 0x0
[ 180.466918] Attempting to get CSW...
[ 180.466919] xfer 13 bytes
[ 180.467067] Status code 0; transferred 13/13
[ 180.467067] -- transfer complete
[ 180.467068] Bulk status result = 0
[ 180.467069] Bulk Status S 0x53425355 T 0xbc3 R 0 Stat 0x0
[ 180.467070] scsi cmd done, result=0x0
[ 180.467071] *** thread sleeping
[ 180.467084] *** thread awakened
[ 180.467087] Command READ_10 (10 bytes)
[ 180.467088] bytes:
[ 180.467090] 28 00 06 80 11 1d 00 00 01 00
[ 180.467096] Bulk Command S 0x43425355 T 0xbc4 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.467097] xfer 31 bytes
[ 180.467108] Status code 0; transferred 31/31
[ 180.467108] -- transfer complete
[ 180.467109] Bulk command transfer result=0
[ 180.467110] xfer 512 bytes, 1 entries
[ 180.467617] Status code 0; transferred 512/512
[ 180.467632] -- transfer complete
[ 180.467635] Bulk data transfer result 0x0
[ 180.467649] Attempting to get CSW...
[ 180.467650] xfer 13 bytes
[ 180.467759] Status code 0; transferred 13/13
[ 180.467760] -- transfer complete
[ 180.467761] Bulk status result = 0
[ 180.467762] Bulk Status S 0x53425355 T 0xbc4 R 0 Stat 0x0
[ 180.467764] scsi cmd done, result=0x0
[ 180.467766] *** thread sleeping
[ 180.467779] *** thread awakened
[ 180.467781] Command READ_10 (10 bytes)
[ 180.467782] bytes:
[ 180.467783] 28 00 06 80 11 1e 00 00 01 00
[ 180.467788] Bulk Command S 0x43425355 T 0xbc5 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.467790] xfer 31 bytes
[ 180.467800] Status code 0; transferred 31/31
[ 180.467802] -- transfer complete
[ 180.467803] Bulk command transfer result=0
[ 180.467804] xfer 512 bytes, 1 entries
[ 180.468304] Status code 0; transferred 512/512
[ 180.468305] -- transfer complete
[ 180.468305] Bulk data transfer result 0x0
[ 180.468306] Attempting to get CSW...
[ 180.468307] xfer 13 bytes
[ 180.468453] Status code 0; transferred 13/13
[ 180.468454] -- transfer complete
[ 180.468454] Bulk status result = 0
[ 180.468455] Bulk Status S 0x53425355 T 0xbc5 R 0 Stat 0x0
[ 180.468456] scsi cmd done, result=0x0
[ 180.468457] *** thread sleeping
[ 180.468475] *** thread awakened
[ 180.468477] Command READ_10 (10 bytes)
[ 180.468477] bytes:
[ 180.468480] 28 00 06 80 11 1f 00 00 01 00
[ 180.468481] Bulk Command S 0x43425355 T 0xbc6 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.468482] xfer 31 bytes
[ 180.468494] Status code 0; transferred 31/31
[ 180.468494] -- transfer complete
[ 180.468495] Bulk command transfer result=0
[ 180.468496] xfer 512 bytes, 1 entries
[ 180.468998] Status code 0; transferred 512/512
[ 180.469000] -- transfer complete
[ 180.469003] Bulk data transfer result 0x0
[ 180.469004] Attempting to get CSW...
[ 180.469004] xfer 13 bytes
[ 180.469147] Status code 0; transferred 13/13
[ 180.469148] -- transfer complete
[ 180.469149] Bulk status result = 0
[ 180.469151] Bulk Status S 0x53425355 T 0xbc6 R 0 Stat 0x0
[ 180.469152] scsi cmd done, result=0x0
[ 180.469154] *** thread sleeping
[ 180.469176] *** thread awakened
[ 180.469177] Command READ_10 (10 bytes)
[ 180.469177] bytes:
[ 180.469180] 28 00 06 80 11 20 00 00 01 00
[ 180.469182] Bulk Command S 0x43425355 T 0xbc7 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.469183] xfer 31 bytes
[ 180.469194] Status code 0; transferred 31/31
[ 180.469195] -- transfer complete
[ 180.469195] Bulk command transfer result=0
[ 180.469196] xfer 512 bytes, 1 entries
[ 180.469698] Status code 0; transferred 512/512
[ 180.469700] -- transfer complete
[ 180.469701] Bulk data transfer result 0x0
[ 180.469702] Attempting to get CSW...
[ 180.469703] xfer 13 bytes
[ 180.469853] Status code 0; transferred 13/13
[ 180.469855] -- transfer complete
[ 180.469856] Bulk status result = 0
[ 180.469858] Bulk Status S 0x53425355 T 0xbc7 R 0 Stat 0x0
[ 180.469859] scsi cmd done, result=0x0
[ 180.469861] *** thread sleeping
[ 180.469882] *** thread awakened
[ 180.469884] Command READ_10 (10 bytes)
[ 180.469885] bytes:
[ 180.469886] 28 00 06 80 11 21 00 00 01 00
[ 180.469893] Bulk Command S 0x43425355 T 0xbc8 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.469894] xfer 31 bytes
[ 180.469908] Status code 0; transferred 31/31
[ 180.469909] -- transfer complete
[ 180.469911] Bulk command transfer result=0
[ 180.469914] xfer 512 bytes, 1 entries
[ 180.470413] Status code 0; transferred 512/512
[ 180.470414] -- transfer complete
[ 180.470414] Bulk data transfer result 0x0
[ 180.470415] Attempting to get CSW...
[ 180.470415] xfer 13 bytes
[ 180.470562] Status code 0; transferred 13/13
[ 180.470563] -- transfer complete
[ 180.470563] Bulk status result = 0
[ 180.470564] Bulk Status S 0x53425355 T 0xbc8 R 0 Stat 0x0
[ 180.470565] scsi cmd done, result=0x0
[ 180.470566] *** thread sleeping
[ 180.470585] *** thread awakened
[ 180.470586] Command READ_10 (10 bytes)
[ 180.470586] bytes:
[ 180.470589] 28 00 06 80 11 22 00 00 01 00
[ 180.470590] Bulk Command S 0x43425355 T 0xbc9 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.470590] xfer 31 bytes
[ 180.470603] Status code 0; transferred 31/31
[ 180.470604] -- transfer complete
[ 180.470605] Bulk command transfer result=0
[ 180.470606] xfer 512 bytes, 1 entries
[ 180.471110] Status code 0; transferred 512/512
[ 180.471111] -- transfer complete
[ 180.471111] Bulk data transfer result 0x0
[ 180.471112] Attempting to get CSW...
[ 180.471112] xfer 13 bytes
[ 180.471261] Status code 0; transferred 13/13
[ 180.471263] -- transfer complete
[ 180.471264] Bulk status result = 0
[ 180.471265] Bulk Status S 0x53425355 T 0xbc9 R 0 Stat 0x0
[ 180.471266] scsi cmd done, result=0x0
[ 180.471267] *** thread sleeping
[ 180.471285] *** thread awakened
[ 180.471285] Command READ_10 (10 bytes)
[ 180.471286] bytes:
[ 180.471288] 28 00 06 80 11 23 00 00 01 00
[ 180.471289] Bulk Command S 0x43425355 T 0xbca L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.471290] xfer 31 bytes
[ 180.471301] Status code 0; transferred 31/31
[ 180.471301] -- transfer complete
[ 180.471302] Bulk command transfer result=0
[ 180.471303] xfer 512 bytes, 1 entries
[ 180.471823] Status code 0; transferred 512/512
[ 180.471824] -- transfer complete
[ 180.471826] Bulk data transfer result 0x0
[ 180.471827] Attempting to get CSW...
[ 180.471828] xfer 13 bytes
[ 180.471964] Status code 0; transferred 13/13
[ 180.471966] -- transfer complete
[ 180.471967] Bulk status result = 0
[ 180.471968] Bulk Status S 0x53425355 T 0xbca R 0 Stat 0x0
[ 180.471969] scsi cmd done, result=0x0
[ 180.471971] *** thread sleeping
[ 180.471988] *** thread awakened
[ 180.471989] Command READ_10 (10 bytes)
[ 180.471989] bytes:
[ 180.471992] 28 00 06 80 11 24 00 00 01 00
[ 180.471993] Bulk Command S 0x43425355 T 0xbcb L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.471993] xfer 31 bytes
[ 180.472006] Status code 0; transferred 31/31
[ 180.472008] -- transfer complete
[ 180.472011] Bulk command transfer result=0
[ 180.472012] xfer 512 bytes, 1 entries
[ 180.472508] Status code 0; transferred 512/512
[ 180.472509] -- transfer complete
[ 180.472511] Bulk data transfer result 0x0
[ 180.472512] Attempting to get CSW...
[ 180.472513] xfer 13 bytes
[ 180.472658] Status code 0; transferred 13/13
[ 180.472658] -- transfer complete
[ 180.472659] Bulk status result = 0
[ 180.472660] Bulk Status S 0x53425355 T 0xbcb R 0 Stat 0x0
[ 180.472660] scsi cmd done, result=0x0
[ 180.472662] *** thread sleeping
[ 180.472678] *** thread awakened
[ 180.472679] Command READ_10 (10 bytes)
[ 180.472679] bytes:
[ 180.472684] 28 00 06 80 11 25 00 00 01 00
[ 180.472687] Bulk Command S 0x43425355 T 0xbcc L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.472688] xfer 31 bytes
[ 180.472698] Status code 0; transferred 31/31
[ 180.472699] -- transfer complete
[ 180.472700] Bulk command transfer result=0
[ 180.472700] xfer 512 bytes, 1 entries
[ 180.473284] Status code 0; transferred 512/512
[ 180.473285] -- transfer complete
[ 180.473285] Bulk data transfer result 0x0
[ 180.473286] Attempting to get CSW...
[ 180.473287] xfer 13 bytes
[ 180.473446] Status code 0; transferred 13/13
[ 180.473446] -- transfer complete
[ 180.473447] Bulk status result = 0
[ 180.473448] Bulk Status S 0x53425355 T 0xbcc R 0 Stat 0x0
[ 180.473449] scsi cmd done, result=0x0
[ 180.473451] *** thread sleeping
[ 180.473467] *** thread awakened
[ 180.473467] Command READ_10 (10 bytes)
[ 180.473468] bytes:
[ 180.473470] 28 00 06 80 11 26 00 00 01 00
[ 180.473471] Bulk Command S 0x43425355 T 0xbcd L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.473472] xfer 31 bytes
[ 180.473486] Status code 0; transferred 31/31
[ 180.473487] -- transfer complete
[ 180.473487] Bulk command transfer result=0
[ 180.473488] xfer 512 bytes, 1 entries
[ 180.474000] Status code 0; transferred 512/512
[ 180.474001] -- transfer complete
[ 180.474002] Bulk data transfer result 0x0
[ 180.474003] Attempting to get CSW...
[ 180.474004] xfer 13 bytes
[ 180.474149] Status code 0; transferred 13/13
[ 180.474150] -- transfer complete
[ 180.474151] Bulk status result = 0
[ 180.474152] Bulk Status S 0x53425355 T 0xbcd R 0 Stat 0x0
[ 180.474153] scsi cmd done, result=0x0
[ 180.474155] *** thread sleeping
[ 180.474170] *** thread awakened
[ 180.474172] Command READ_10 (10 bytes)
[ 180.474174] bytes:
[ 180.474175] 28 00 06 80 11 27 00 00 01 00
[ 180.474183] Bulk Command S 0x43425355 T 0xbce L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.474185] xfer 31 bytes
[ 180.474198] Status code 0; transferred 31/31
[ 180.474199] -- transfer complete
[ 180.474200] Bulk command transfer result=0
[ 180.474201] xfer 512 bytes, 1 entries
[ 180.474703] Status code 0; transferred 512/512
[ 180.474705] -- transfer complete
[ 180.474706] Bulk data transfer result 0x0
[ 180.474707] Attempting to get CSW...
[ 180.474708] xfer 13 bytes
[ 180.474857] Status code 0; transferred 13/13
[ 180.474859] -- transfer complete
[ 180.474860] Bulk status result = 0
[ 180.474862] Bulk Status S 0x53425355 T 0xbce R 0 Stat 0x0
[ 180.474863] scsi cmd done, result=0x0
[ 180.474866] *** thread sleeping
[ 180.474889] *** thread awakened
[ 180.474892] Command READ_10 (10 bytes)
[ 180.474893] bytes:
[ 180.474895] 28 00 06 80 11 28 00 00 01 00
[ 180.474901] Bulk Command S 0x43425355 T 0xbcf L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.474903] xfer 31 bytes
[ 180.474922] Status code 0; transferred 31/31
[ 180.474924] -- transfer complete
[ 180.474926] Bulk command transfer result=0
[ 180.474929] xfer 512 bytes, 1 entries
[ 180.475426] Status code 0; transferred 512/512
[ 180.475427] -- transfer complete
[ 180.475427] Bulk data transfer result 0x0
[ 180.475428] Attempting to get CSW...
[ 180.475429] xfer 13 bytes
[ 180.475573] Status code 0; transferred 13/13
[ 180.475574] -- transfer complete
[ 180.475574] Bulk status result = 0
[ 180.475575] Bulk Status S 0x53425355 T 0xbcf R 0 Stat 0x0
[ 180.475576] scsi cmd done, result=0x0
[ 180.475578] *** thread sleeping
[ 180.475595] *** thread awakened
[ 180.475597] Command READ_10 (10 bytes)
[ 180.475597] bytes:
[ 180.475600] 28 00 06 80 11 29 00 00 01 00
[ 180.475601] Bulk Command S 0x43425355 T 0xbd0 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.475602] xfer 31 bytes
[ 180.475613] Status code 0; transferred 31/31
[ 180.475614] -- transfer complete
[ 180.475615] Bulk command transfer result=0
[ 180.475616] xfer 512 bytes, 1 entries
[ 180.476124] Status code 0; transferred 512/512
[ 180.476125] -- transfer complete
[ 180.476125] Bulk data transfer result 0x0
[ 180.476126] Attempting to get CSW...
[ 180.476126] xfer 13 bytes
[ 180.476273] Status code 0; transferred 13/13
[ 180.476273] -- transfer complete
[ 180.476275] Bulk status result = 0
[ 180.476276] Bulk Status S 0x53425355 T 0xbd0 R 0 Stat 0x0
[ 180.476277] scsi cmd done, result=0x0
[ 180.476279] *** thread sleeping
[ 180.476296] *** thread awakened
[ 180.476297] Command READ_10 (10 bytes)
[ 180.476298] bytes:
[ 180.476300] 28 00 06 80 11 2a 00 00 01 00
[ 180.476302] Bulk Command S 0x43425355 T 0xbd1 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.476302] xfer 31 bytes
[ 180.476313] Status code 0; transferred 31/31
[ 180.476313] -- transfer complete
[ 180.476314] Bulk command transfer result=0
[ 180.476315] xfer 512 bytes, 1 entries
[ 180.476837] Status code 0; transferred 512/512
[ 180.476838] -- transfer complete
[ 180.476840] Bulk data transfer result 0x0
[ 180.476841] Attempting to get CSW...
[ 180.476842] xfer 13 bytes
[ 180.476980] Status code 0; transferred 13/13
[ 180.476981] -- transfer complete
[ 180.476982] Bulk status result = 0
[ 180.476984] Bulk Status S 0x53425355 T 0xbd1 R 0 Stat 0x0
[ 180.476985] scsi cmd done, result=0x0
[ 180.476987] *** thread sleeping
[ 180.477009] *** thread awakened
[ 180.477011] Command READ_10 (10 bytes)
[ 180.477012] bytes:
[ 180.477015] 28 00 06 80 11 2b 00 00 01 00
[ 180.477017] Bulk Command S 0x43425355 T 0xbd2 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.477018] xfer 31 bytes
[ 180.477036] Status code 0; transferred 31/31
[ 180.477038] -- transfer complete
[ 180.477039] Bulk command transfer result=0
[ 180.477041] xfer 512 bytes, 1 entries
[ 180.477540] Status code 0; transferred 512/512
[ 180.477541] -- transfer complete
[ 180.477541] Bulk data transfer result 0x0
[ 180.477542] Attempting to get CSW...
[ 180.477543] xfer 13 bytes
[ 180.477687] Status code 0; transferred 13/13
[ 180.477687] -- transfer complete
[ 180.477688] Bulk status result = 0
[ 180.477689] Bulk Status S 0x53425355 T 0xbd2 R 0 Stat 0x0
[ 180.477691] scsi cmd done, result=0x0
[ 180.477693] *** thread sleeping
[ 180.477710] *** thread awakened
[ 180.477711] Command READ_10 (10 bytes)
[ 180.477712] bytes:
[ 180.477715] 28 00 06 80 11 2c 00 00 01 00
[ 180.477716] Bulk Command S 0x43425355 T 0xbd3 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.477717] xfer 31 bytes
[ 180.477728] Status code 0; transferred 31/31
[ 180.477729] -- transfer complete
[ 180.477730] Bulk command transfer result=0
[ 180.477731] xfer 512 bytes, 1 entries
[ 180.478238] Status code 0; transferred 512/512
[ 180.478238] -- transfer complete
[ 180.478239] Bulk data transfer result 0x0
[ 180.478239] Attempting to get CSW...
[ 180.478240] xfer 13 bytes
[ 180.478389] Status code 0; transferred 13/13
[ 180.478391] -- transfer complete
[ 180.478392] Bulk status result = 0
[ 180.478393] Bulk Status S 0x53425355 T 0xbd3 R 0 Stat 0x0
[ 180.478394] scsi cmd done, result=0x0
[ 180.478396] *** thread sleeping
[ 180.478409] *** thread awakened
[ 180.478411] Command READ_10 (10 bytes)
[ 180.478412] bytes:
[ 180.478413] 28 00 06 80 11 2d 00 00 01 00
[ 180.478418] Bulk Command S 0x43425355 T 0xbd4 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.478419] xfer 31 bytes
[ 180.478430] Status code 0; transferred 31/31
[ 180.478431] -- transfer complete
[ 180.478432] Bulk command transfer result=0
[ 180.478433] xfer 512 bytes, 1 entries
[ 180.478940] Status code 0; transferred 512/512
[ 180.478942] -- transfer complete
[ 180.478943] Bulk data transfer result 0x0
[ 180.478944] Attempting to get CSW...
[ 180.478946] xfer 13 bytes
[ 180.479089] Status code 0; transferred 13/13
[ 180.479090] -- transfer complete
[ 180.479092] Bulk status result = 0
[ 180.479093] Bulk Status S 0x53425355 T 0xbd4 R 0 Stat 0x0
[ 180.479094] scsi cmd done, result=0x0
[ 180.479096] *** thread sleeping
[ 180.479116] *** thread awakened
[ 180.479117] Command READ_10 (10 bytes)
[ 180.479118] bytes:
[ 180.479120] 28 00 06 80 11 2e 00 00 01 00
[ 180.479121] Bulk Command S 0x43425355 T 0xbd5 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.479122] xfer 31 bytes
[ 180.479134] Status code 0; transferred 31/31
[ 180.479135] -- transfer complete
[ 180.479137] Bulk command transfer result=0
[ 180.479139] xfer 512 bytes, 1 entries
[ 180.479640] Status code 0; transferred 512/512
[ 180.479640] -- transfer complete
[ 180.479641] Bulk data transfer result 0x0
[ 180.479642] Attempting to get CSW...
[ 180.479642] xfer 13 bytes
[ 180.479789] Status code 0; transferred 13/13
[ 180.479790] -- transfer complete
[ 180.479791] Bulk status result = 0
[ 180.479792] Bulk Status S 0x53425355 T 0xbd5 R 0 Stat 0x0
[ 180.479792] scsi cmd done, result=0x0
[ 180.479794] *** thread sleeping
[ 180.479811] *** thread awakened
[ 180.479815] Command READ_10 (10 bytes)
[ 180.479815] bytes:
[ 180.479816] 28 00 06 80 11 2f 00 00 01 00
[ 180.479823] Bulk Command S 0x43425355 T 0xbd6 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.479823] xfer 31 bytes
[ 180.479842] Status code 0; transferred 31/31
[ 180.479843] -- transfer complete
[ 180.479843] Bulk command transfer result=0
[ 180.479844] xfer 512 bytes, 1 entries
[ 180.480338] Status code 0; transferred 512/512
[ 180.480338] -- transfer complete
[ 180.480340] Bulk data transfer result 0x0
[ 180.480341] Attempting to get CSW...
[ 180.480342] xfer 13 bytes
[ 180.480487] Status code 0; transferred 13/13
[ 180.480488] -- transfer complete
[ 180.480489] Bulk status result = 0
[ 180.480489] Bulk Status S 0x53425355 T 0xbd6 R 0 Stat 0x0
[ 180.480490] scsi cmd done, result=0x0
[ 180.480491] *** thread sleeping
[ 180.480508] *** thread awakened
[ 180.480510] Command READ_10 (10 bytes)
[ 180.480511] bytes:
[ 180.480511] 28 00 06 80 11 30 00 00 01 00
[ 180.480518] Bulk Command S 0x43425355 T 0xbd7 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.480520] xfer 31 bytes
[ 180.480529] Status code 0; transferred 31/31
[ 180.480530] -- transfer complete
[ 180.480530] Bulk command transfer result=0
[ 180.480531] xfer 512 bytes, 1 entries
[ 180.481041] Status code 0; transferred 512/512
[ 180.481042] -- transfer complete
[ 180.481043] Bulk data transfer result 0x0
[ 180.481044] Attempting to get CSW...
[ 180.481045] xfer 13 bytes
[ 180.481192] Status code 0; transferred 13/13
[ 180.481195] -- transfer complete
[ 180.481198] Bulk status result = 0
[ 180.481200] Bulk Status S 0x53425355 T 0xbd7 R 0 Stat 0x0
[ 180.481202] scsi cmd done, result=0x0
[ 180.481204] *** thread sleeping
[ 180.481223] *** thread awakened
[ 180.481224] Command READ_10 (10 bytes)
[ 180.481224] bytes:
[ 180.481227] 28 00 06 80 11 31 00 00 01 00
[ 180.481229] Bulk Command S 0x43425355 T 0xbd8 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.481230] xfer 31 bytes
[ 180.481242] Status code 0; transferred 31/31
[ 180.481243] -- transfer complete
[ 180.481243] Bulk command transfer result=0
[ 180.481244] xfer 512 bytes, 1 entries
[ 180.481765] Status code 0; transferred 512/512
[ 180.481767] -- transfer complete
[ 180.481768] Bulk data transfer result 0x0
[ 180.481769] Attempting to get CSW...
[ 180.481771] xfer 13 bytes
[ 180.481902] Status code 0; transferred 13/13
[ 180.481905] -- transfer complete
[ 180.481908] Bulk status result = 0
[ 180.481912] Bulk Status S 0x53425355 T 0xbd8 R 0 Stat 0x0
[ 180.481914] scsi cmd done, result=0x0
[ 180.481919] *** thread sleeping
[ 180.481956] *** thread awakened
[ 180.481958] Command READ_10 (10 bytes)
[ 180.481959] bytes:
[ 180.481960] 28 00 06 80 11 32 00 00 01 00
[ 180.481965] Bulk Command S 0x43425355 T 0xbd9 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.481967] xfer 31 bytes
[ 180.481988] Status code 0; transferred 31/31
[ 180.481990] -- transfer complete
[ 180.481992] Bulk command transfer result=0
[ 180.481993] xfer 512 bytes, 1 entries
[ 180.482484] Status code 0; transferred 512/512
[ 180.482484] -- transfer complete
[ 180.482485] Bulk data transfer result 0x0
[ 180.482486] Attempting to get CSW...
[ 180.482486] xfer 13 bytes
[ 180.482632] Status code 0; transferred 13/13
[ 180.482633] -- transfer complete
[ 180.482634] Bulk status result = 0
[ 180.482635] Bulk Status S 0x53425355 T 0xbd9 R 0 Stat 0x0
[ 180.482636] scsi cmd done, result=0x0
[ 180.482638] *** thread sleeping
[ 180.482653] *** thread awakened
[ 180.482655] Command READ_10 (10 bytes)
[ 180.482656] bytes:
[ 180.482659] 28 00 06 80 11 33 00 00 01 00
[ 180.482660] Bulk Command S 0x43425355 T 0xbda L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.482661] xfer 31 bytes
[ 180.482673] Status code 0; transferred 31/31
[ 180.482674] -- transfer complete
[ 180.482675] Bulk command transfer result=0
[ 180.482675] xfer 512 bytes, 1 entries
[ 180.483229] Status code 0; transferred 512/512
[ 180.483230] -- transfer complete
[ 180.483231] Bulk data transfer result 0x0
[ 180.483231] Attempting to get CSW...
[ 180.483231] xfer 13 bytes
[ 180.483389] Status code 0; transferred 13/13
[ 180.483390] -- transfer complete
[ 180.483391] Bulk status result = 0
[ 180.483392] Bulk Status S 0x53425355 T 0xbda R 0 Stat 0x0
[ 180.483393] scsi cmd done, result=0x0
[ 180.483394] *** thread sleeping
[ 180.483410] *** thread awakened
[ 180.483411] Command READ_10 (10 bytes)
[ 180.483412] bytes:
[ 180.483413] 28 00 06 80 11 34 00 00 01 00
[ 180.483421] Bulk Command S 0x43425355 T 0xbdb L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.483424] xfer 31 bytes
[ 180.483436] Status code 0; transferred 31/31
[ 180.483436] -- transfer complete
[ 180.483437] Bulk command transfer result=0
[ 180.483437] xfer 512 bytes, 1 entries
[ 180.483943] Status code 0; transferred 512/512
[ 180.483946] -- transfer complete
[ 180.483949] Bulk data transfer result 0x0
[ 180.483951] Attempting to get CSW...
[ 180.483953] xfer 13 bytes
[ 180.484093] Status code 0; transferred 13/13
[ 180.484094] -- transfer complete
[ 180.484095] Bulk status result = 0
[ 180.484097] Bulk Status S 0x53425355 T 0xbdb R 0 Stat 0x0
[ 180.484098] scsi cmd done, result=0x0
[ 180.484100] *** thread sleeping
[ 180.484125] *** thread awakened
[ 180.484126] Command READ_10 (10 bytes)
[ 180.484127] bytes:
[ 180.484131] 28 00 06 80 11 35 00 00 01 00
[ 180.484133] Bulk Command S 0x43425355 T 0xbdc L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.484134] xfer 31 bytes
[ 180.484150] Status code 0; transferred 31/31
[ 180.484150] -- transfer complete
[ 180.484151] Bulk command transfer result=0
[ 180.484152] xfer 512 bytes, 1 entries
[ 180.484652] Status code 0; transferred 512/512
[ 180.484653] -- transfer complete
[ 180.484655] Bulk data transfer result 0x0
[ 180.484656] Attempting to get CSW...
[ 180.484657] xfer 13 bytes
[ 180.484799] Status code 0; transferred 13/13
[ 180.484800] -- transfer complete
[ 180.484801] Bulk status result = 0
[ 180.484802] Bulk Status S 0x53425355 T 0xbdc R 0 Stat 0x0
[ 180.484804] scsi cmd done, result=0x0
[ 180.484806] *** thread sleeping
[ 180.484822] *** thread awakened
[ 180.484824] Command READ_10 (10 bytes)
[ 180.484825] bytes:
[ 180.484826] 28 00 06 80 11 36 00 00 01 00
[ 180.484831] Bulk Command S 0x43425355 T 0xbdd L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.484832] xfer 31 bytes
[ 180.484843] Status code 0; transferred 31/31
[ 180.484844] -- transfer complete
[ 180.484846] Bulk command transfer result=0
[ 180.484847] xfer 512 bytes, 1 entries
[ 180.485350] Status code 0; transferred 512/512
[ 180.485351] -- transfer complete
[ 180.485352] Bulk data transfer result 0x0
[ 180.485352] Attempting to get CSW...
[ 180.485354] xfer 13 bytes
[ 180.485500] Status code 0; transferred 13/13
[ 180.485501] -- transfer complete
[ 180.485502] Bulk status result = 0
[ 180.485503] Bulk Status S 0x53425355 T 0xbdd R 0 Stat 0x0
[ 180.485503] scsi cmd done, result=0x0
[ 180.485505] *** thread sleeping
[ 180.485523] *** thread awakened
[ 180.485524] Command READ_10 (10 bytes)
[ 180.485525] bytes:
[ 180.485528] 28 00 06 80 11 37 00 00 01 00
[ 180.485529] Bulk Command S 0x43425355 T 0xbde L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.485530] xfer 31 bytes
[ 180.485543] Status code 0; transferred 31/31
[ 180.485543] -- transfer complete
[ 180.485544] Bulk command transfer result=0
[ 180.485545] xfer 512 bytes, 1 entries
[ 180.486049] Status code 0; transferred 512/512
[ 180.486050] -- transfer complete
[ 180.486052] Bulk data transfer result 0x0
[ 180.486052] Attempting to get CSW...
[ 180.486054] xfer 13 bytes
[ 180.486196] Status code 0; transferred 13/13
[ 180.486197] -- transfer complete
[ 180.486198] Bulk status result = 0
[ 180.486199] Bulk Status S 0x53425355 T 0xbde R 0 Stat 0x0
[ 180.486200] scsi cmd done, result=0x0
[ 180.486202] *** thread sleeping
[ 180.486221] *** thread awakened
[ 180.486222] Command READ_10 (10 bytes)
[ 180.486223] bytes:
[ 180.486225] 28 00 06 80 11 38 00 00 01 00
[ 180.486226] Bulk Command S 0x43425355 T 0xbdf L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.486227] xfer 31 bytes
[ 180.486237] Status code 0; transferred 31/31
[ 180.486238] -- transfer complete
[ 180.486239] Bulk command transfer result=0
[ 180.486239] xfer 512 bytes, 1 entries
[ 180.486769] Status code 0; transferred 512/512
[ 180.486771] -- transfer complete
[ 180.486772] Bulk data transfer result 0x0
[ 180.486773] Attempting to get CSW...
[ 180.486774] xfer 13 bytes
[ 180.486922] Status code 0; transferred 13/13
[ 180.486924] -- transfer complete
[ 180.486926] Bulk status result = 0
[ 180.486929] Bulk Status S 0x53425355 T 0xbdf R 0 Stat 0x0
[ 180.486931] scsi cmd done, result=0x0
[ 180.486934] *** thread sleeping
[ 180.486951] *** thread awakened
[ 180.486953] Command READ_10 (10 bytes)
[ 180.486955] bytes:
[ 180.486956] 28 00 06 80 11 39 00 00 01 00
[ 180.486967] Bulk Command S 0x43425355 T 0xbe0 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.486970] xfer 31 bytes
[ 180.486986] Status code 0; transferred 31/31
[ 180.486988] -- transfer complete
[ 180.486999] Bulk command transfer result=0
[ 180.487001] xfer 512 bytes, 1 entries
[ 180.487514] Status code 0; transferred 512/512
[ 180.487515] -- transfer complete
[ 180.487516] Bulk data transfer result 0x0
[ 180.487516] Attempting to get CSW...
[ 180.487517] xfer 13 bytes
[ 180.487661] Status code 0; transferred 13/13
[ 180.487662] -- transfer complete
[ 180.487662] Bulk status result = 0
[ 180.487663] Bulk Status S 0x53425355 T 0xbe0 R 0 Stat 0x0
[ 180.487664] scsi cmd done, result=0x0
[ 180.487666] *** thread sleeping
[ 180.487687] *** thread awakened
[ 180.487688] Command READ_10 (10 bytes)
[ 180.487688] bytes:
[ 180.487691] 28 00 06 80 11 3a 00 00 01 00
[ 180.487693] Bulk Command S 0x43425355 T 0xbe1 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.487693] xfer 31 bytes
[ 180.487709] Status code 0; transferred 31/31
[ 180.487710] -- transfer complete
[ 180.487712] Bulk command transfer result=0
[ 180.487713] xfer 512 bytes, 1 entries
[ 180.488235] Status code 0; transferred 512/512
[ 180.488236] -- transfer complete
[ 180.488237] Bulk data transfer result 0x0
[ 180.488237] Attempting to get CSW...
[ 180.488238] xfer 13 bytes
[ 180.488383] Status code 0; transferred 13/13
[ 180.488384] -- transfer complete
[ 180.488385] Bulk status result = 0
[ 180.488386] Bulk Status S 0x53425355 T 0xbe1 R 0 Stat 0x0
[ 180.488387] scsi cmd done, result=0x0
[ 180.488388] *** thread sleeping
[ 180.488410] *** thread awakened
[ 180.488410] Command READ_10 (10 bytes)
[ 180.488411] bytes:
[ 180.488413] 28 00 06 80 11 3b 00 00 01 00
[ 180.488415] Bulk Command S 0x43425355 T 0xbe2 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.488416] xfer 31 bytes
[ 180.488426] Status code 0; transferred 31/31
[ 180.488427] -- transfer complete
[ 180.488427] Bulk command transfer result=0
[ 180.488428] xfer 512 bytes, 1 entries
[ 180.488956] Status code 0; transferred 512/512
[ 180.488958] -- transfer complete
[ 180.488960] Bulk data transfer result 0x0
[ 180.488961] Attempting to get CSW...
[ 180.488962] xfer 13 bytes
[ 180.489108] Status code 0; transferred 13/13
[ 180.489109] -- transfer complete
[ 180.489110] Bulk status result = 0
[ 180.489110] Bulk Status S 0x53425355 T 0xbe2 R 0 Stat 0x0
[ 180.489111] scsi cmd done, result=0x0
[ 180.489112] *** thread sleeping
[ 180.489130] *** thread awakened
[ 180.489131] Command READ_10 (10 bytes)
[ 180.489132] bytes:
[ 180.489134] 28 00 06 80 11 3c 00 00 01 00
[ 180.489135] Bulk Command S 0x43425355 T 0xbe3 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.489136] xfer 31 bytes
[ 180.489147] Status code 0; transferred 31/31
[ 180.489148] -- transfer complete
[ 180.489149] Bulk command transfer result=0
[ 180.489150] xfer 512 bytes, 1 entries
[ 180.489679] Status code 0; transferred 512/512
[ 180.489680] -- transfer complete
[ 180.489682] Bulk data transfer result 0x0
[ 180.489683] Attempting to get CSW...
[ 180.489684] xfer 13 bytes
[ 180.489829] Status code 0; transferred 13/13
[ 180.489830] -- transfer complete
[ 180.489832] Bulk status result = 0
[ 180.489833] Bulk Status S 0x53425355 T 0xbe3 R 0 Stat 0x0
[ 180.489834] scsi cmd done, result=0x0
[ 180.489836] *** thread sleeping
[ 180.489849] *** thread awakened
[ 180.489851] Command READ_10 (10 bytes)
[ 180.489852] bytes:
[ 180.489853] 28 00 06 80 11 3d 00 00 01 00
[ 180.489866] Bulk Command S 0x43425355 T 0xbe4 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.489868] xfer 31 bytes
[ 180.489879] Status code 0; transferred 31/31
[ 180.489880] -- transfer complete
[ 180.489882] Bulk command transfer result=0
[ 180.489883] xfer 512 bytes, 1 entries
[ 180.490411] Status code 0; transferred 512/512
[ 180.490412] -- transfer complete
[ 180.490413] Bulk data transfer result 0x0
[ 180.490413] Attempting to get CSW...
[ 180.490414] xfer 13 bytes
[ 180.490560] Status code 0; transferred 13/13
[ 180.490560] -- transfer complete
[ 180.490561] Bulk status result = 0
[ 180.490563] Bulk Status S 0x53425355 T 0xbe4 R 0 Stat 0x0
[ 180.490564] scsi cmd done, result=0x0
[ 180.490565] *** thread sleeping
[ 180.490584] *** thread awakened
[ 180.490585] Command READ_10 (10 bytes)
[ 180.490585] bytes:
[ 180.490587] 28 00 06 80 11 3e 00 00 01 00
[ 180.490589] Bulk Command S 0x43425355 T 0xbe5 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.490589] xfer 31 bytes
[ 180.490600] Status code 0; transferred 31/31
[ 180.490601] -- transfer complete
[ 180.490601] Bulk command transfer result=0
[ 180.490602] xfer 512 bytes, 1 entries
[ 180.491134] Status code 0; transferred 512/512
[ 180.491135] -- transfer complete
[ 180.491135] Bulk data transfer result 0x0
[ 180.491136] Attempting to get CSW...
[ 180.491136] xfer 13 bytes
[ 180.491283] Status code 0; transferred 13/13
[ 180.491283] -- transfer complete
[ 180.491284] Bulk status result = 0
[ 180.491285] Bulk Status S 0x53425355 T 0xbe5 R 0 Stat 0x0
[ 180.491286] scsi cmd done, result=0x0
[ 180.491287] *** thread sleeping
[ 180.491303] *** thread awakened
[ 180.491304] Command READ_10 (10 bytes)
[ 180.491304] bytes:
[ 180.491306] 28 00 06 80 11 3f 00 00 01 00
[ 180.491307] Bulk Command S 0x43425355 T 0xbe6 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.491308] xfer 31 bytes
[ 180.491324] Status code 0; transferred 31/31
[ 180.491325] -- transfer complete
[ 180.491325] Bulk command transfer result=0
[ 180.491326] xfer 512 bytes, 1 entries
[ 180.491874] Status code 0; transferred 512/512
[ 180.491876] -- transfer complete
[ 180.491877] Bulk data transfer result 0x0
[ 180.491878] Attempting to get CSW...
[ 180.491879] xfer 13 bytes
[ 180.492010] Status code 0; transferred 13/13
[ 180.492011] -- transfer complete
[ 180.492013] Bulk status result = 0
[ 180.492015] Bulk Status S 0x53425355 T 0xbe6 R 0 Stat 0x0
[ 180.492016] scsi cmd done, result=0x0
[ 180.492018] *** thread sleeping
[ 180.492040] *** thread awakened
[ 180.492041] Command READ_10 (10 bytes)
[ 180.492042] bytes:
[ 180.492045] 28 00 06 80 11 40 00 00 01 00
[ 180.492054] Bulk Command S 0x43425355 T 0xbe7 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.492056] xfer 31 bytes
[ 180.492070] Status code 0; transferred 31/31
[ 180.492071] -- transfer complete
[ 180.492072] Bulk command transfer result=0
[ 180.492073] xfer 512 bytes, 1 entries
[ 180.492564] Status code 0; transferred 512/512
[ 180.492565] -- transfer complete
[ 180.492566] Bulk data transfer result 0x0
[ 180.492566] Attempting to get CSW...
[ 180.492567] xfer 13 bytes
[ 180.492714] Status code 0; transferred 13/13
[ 180.492715] -- transfer complete
[ 180.492715] Bulk status result = 0
[ 180.492716] Bulk Status S 0x53425355 T 0xbe7 R 0 Stat 0x0
[ 180.492717] scsi cmd done, result=0x0
[ 180.492719] *** thread sleeping
[ 180.492735] *** thread awakened
[ 180.492736] Command READ_10 (10 bytes)
[ 180.492737] bytes:
[ 180.492739] 28 00 06 80 11 41 00 00 01 00
[ 180.492741] Bulk Command S 0x43425355 T 0xbe8 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.492741] xfer 31 bytes
[ 180.492754] Status code 0; transferred 31/31
[ 180.492755] -- transfer complete
[ 180.492757] Bulk command transfer result=0
[ 180.492758] xfer 512 bytes, 1 entries
[ 180.493299] Status code 0; transferred 512/512
[ 180.493299] -- transfer complete
[ 180.493300] Bulk data transfer result 0x0
[ 180.493300] Attempting to get CSW...
[ 180.493302] xfer 13 bytes
[ 180.493461] Status code 0; transferred 13/13
[ 180.493462] -- transfer complete
[ 180.493463] Bulk status result = 0
[ 180.493465] Bulk Status S 0x53425355 T 0xbe8 R 0 Stat 0x0
[ 180.493466] scsi cmd done, result=0x0
[ 180.493467] *** thread sleeping
[ 180.493479] *** thread awakened
[ 180.493480] Command READ_10 (10 bytes)
[ 180.493481] bytes:
[ 180.493481] 28 00 06 80 11 42 00 00 01 00
[ 180.493486] Bulk Command S 0x43425355 T 0xbe9 L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.493487] xfer 31 bytes
[ 180.493501] Status code 0; transferred 31/31
[ 180.493502] -- transfer complete
[ 180.493503] Bulk command transfer result=0
[ 180.493504] xfer 512 bytes, 1 entries
[ 180.494001] Status code 0; transferred 512/512
[ 180.494003] -- transfer complete
[ 180.494004] Bulk data transfer result 0x0
[ 180.494005] Attempting to get CSW...
[ 180.494006] xfer 13 bytes
[ 180.494152] Status code 0; transferred 13/13
[ 180.494154] -- transfer complete
[ 180.494155] Bulk status result = 0
[ 180.494156] Bulk Status S 0x53425355 T 0xbe9 R 0 Stat 0x0
[ 180.494158] scsi cmd done, result=0x0
[ 180.494159] *** thread sleeping
[ 180.494179] *** thread awakened
[ 180.494181] Command READ_10 (10 bytes)
[ 180.494181] bytes:
[ 180.494182] 28 00 06 80 11 43 00 00 01 00
[ 180.494190] Bulk Command S 0x43425355 T 0xbea L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.494192] xfer 31 bytes
[ 180.494203] Status code 0; transferred 31/31
[ 180.494204] -- transfer complete
[ 180.494204] Bulk command transfer result=0
[ 180.494205] xfer 512 bytes, 1 entries
[ 180.494700] Status code 0; transferred 512/512
[ 180.494702] -- transfer complete
[ 180.494703] Bulk data transfer result 0x0
[ 180.494704] Attempting to get CSW...
[ 180.494705] xfer 13 bytes
[ 180.494847] Status code 0; transferred 13/13
[ 180.494849] -- transfer complete
[ 180.494850] Bulk status result = 0
[ 180.494851] Bulk Status S 0x53425355 T 0xbea R 0 Stat 0x0
[ 180.494853] scsi cmd done, result=0x0
[ 180.494855] *** thread sleeping
[ 180.494874] *** thread awakened
[ 180.494876] Command READ_10 (10 bytes)
[ 180.494878] bytes:
[ 180.494879] 28 00 06 80 11 44 00 00 01 00
[ 180.494889] Bulk Command S 0x43425355 T 0xbeb L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.494891] xfer 31 bytes
[ 180.494905] Status code 0; transferred 31/31
[ 180.494908] -- transfer complete
[ 180.494909] Bulk command transfer result=0
[ 180.494911] xfer 512 bytes, 1 entries
[ 180.495396] Status code 0; transferred 512/512
[ 180.495397] -- transfer complete
[ 180.495397] Bulk data transfer result 0x0
[ 180.495398] Attempting to get CSW...
[ 180.495399] xfer 13 bytes
[ 180.495548] Status code 0; transferred 13/13
[ 180.495548] -- transfer complete
[ 180.495549] Bulk status result = 0
[ 180.495550] Bulk Status S 0x53425355 T 0xbeb R 0 Stat 0x0
[ 180.495551] scsi cmd done, result=0x0
[ 180.495552] *** thread sleeping
[ 180.495567] *** thread awakened
[ 180.495569] Command READ_10 (10 bytes)
[ 180.495569] bytes:
[ 180.495572] 28 00 06 80 11 45 00 00 01 00
[ 180.495573] Bulk Command S 0x43425355 T 0xbec L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.495574] xfer 31 bytes
[ 180.495588] Status code 0; transferred 31/31
[ 180.495589] -- transfer complete
[ 180.495590] Bulk command transfer result=0
[ 180.495590] xfer 512 bytes, 1 entries
[ 180.496085] Status code 0; transferred 512/512
[ 180.496086] -- transfer complete
[ 180.496086] Bulk data transfer result 0x0
[ 180.496087] Attempting to get CSW...
[ 180.496088] xfer 13 bytes
[ 180.496236] Status code 0; transferred 13/13
[ 180.496236] -- transfer complete
[ 180.496237] Bulk status result = 0
[ 180.496238] Bulk Status S 0x53425355 T 0xbec R 0 Stat 0x0
[ 180.496238] scsi cmd done, result=0x0
[ 180.496239] *** thread sleeping
[ 180.496250] *** thread awakened
[ 180.496251] Command READ_10 (10 bytes)
[ 180.496251] bytes:
[ 180.496253] 28 00 06 80 11 46 00 00 01 00
[ 180.496254] Bulk Command S 0x43425355 T 0xbed L 512 F 128 Trg 0 LUN 0 CL 10
[ 180.496254] xfer 31 bytes
[ 180.496278] Status code 0; transferred 31/31
[ 180.496279] -- transfer complete
[ 180.496280] Bulk command transfer result=0
[ 180.496280] xfer 512 bytes, 1 entries
[ 180.496792] Status code 0; transferred 512/512
[ 180.496793] -- transfer complete
[ 180.496794] Bulk data transfer result 0x0
Back to top
View user's profile Send private message
markisthejob
Tux's lil' helper
Tux's lil' helper


Joined: 04 Aug 2008
Posts: 142
Location: Cork, Republic of Ireland

PostPosted: Sun Dec 13, 2015 11:17 pm    Post subject: Reply with quote

I would recommend that you build the Marvel wifi-ex Drivers in as modules
Also this way you can load/unload the modules without needing to restart your system
Try disabling the wifi, re-enabling it and running dmesg immediately
Back to top
View user's profile Send private message
erus
n00b
n00b


Joined: 14 Apr 2012
Posts: 36

PostPosted: Wed Dec 16, 2015 10:43 pm    Post subject: Reply with quote

Sorry for the delay, I had an hard time finding some spare time this week.

Code:
dmesg | grep mwifiex_pcie

[  138.160960] mwifiex_pcie 0000:01:00.0: Direct firmware load for mrvl/pcie8897_uapsta.bin failed with error -2
[  138.160963] mwifiex_pcie 0000:01:00.0: Failed to get firmware mrvl/pcie8897_uapsta.bin


I have tried to track down that firmware but couldn't find much result beside

https://newit.co.uk/forum/index.php?topic=4238.0

They're saying that a driver might be in conflict with mwifiex_pcie.

There is a link at the end with a patch but they have been testing it on mirabox only.

Thanks
Back to top
View user's profile Send private message
markisthejob
Tux's lil' helper
Tux's lil' helper


Joined: 04 Aug 2008
Posts: 142
Location: Cork, Republic of Ireland

PostPosted: Thu Dec 17, 2015 1:58 am    Post subject: Reply with quote

Ok thats better info :D There should be no need to track down any firmware as your card is already supported in the kernel.
Take a look at this topic. The problem was similar to yours and was solved successfully by several people

https://forums.gentoo.org/viewtopic-t-1001638.html
Back to top
View user's profile Send private message
erus
n00b
n00b


Joined: 14 Apr 2012
Posts: 36

PostPosted: Thu Dec 31, 2015 2:29 am    Post subject: Reply with quote

Sorry again for the late answer.

My problem was actually coming from the missing linux-firmware package.

Thanks for the help
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum