Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
New Install - PROBLEM - Updating the @world set
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
gentooF1_
n00b
n00b


Joined: 22 May 2016
Posts: 7

PostPosted: Sun May 22, 2016 3:58 pm    Post subject: New Install - PROBLEM - Updating the @world set Reply with quote

I have a problem with installation of GENTOO...

I am on chapter: Updating the @world set

I did: root #emerge --ask --update --deep --newuse @world

But I get errors when trying to emerge, like this:

Code:

!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/app-arch/xz-utils-5.2.2/work/xz-5.2.2-abi_x86_64.amd64/config.log
 * ERROR: app-arch/xz-utils-5.2.2::gentoo failed (configure phase):
 *   econf failed
 *
 * Call stack:
 *               ebuild.sh, line  133:  Called src_configure
 *             environment, line 2763:  Called multilib-minimal_src_configure
 *             environment, line 2056:  Called multilib_foreach_abi 'multilib-minimal_abi_src_configure'
 *             environment, line 2270:  Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_                          configure'
 *             environment, line 1986:  Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure'
 *             environment, line 1984:  Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_configure'
 *             environment, line  379:  Called multilib-minimal_abi_src_configure
 *             environment, line 2050:  Called multilib_src_configure
 *             environment, line 2483:  Called econf '--disable-nls' '--enable-threads' '--disable-static'
 *        phase-helpers.sh, line  662:  Called __helpers_die 'econf failed'
 *   isolated-functions.sh, line  117:  Called die
 * The specific snippet of code:
 *              die "$@"
 *
 * If you need support, post the output of `emerge --info '=app-arch/xz-utils-5.2.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-arch/xz-utils-5.2.2::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.2.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.2.2/temp/environment'.
 * Working directory: '/var/tmp/portage/app-arch/xz-utils-5.2.2/work/xz-5.2.2-abi_x86_64.amd64'
 * S: '/var/tmp/portage/app-arch/xz-utils-5.2.2/work/xz-5.2.2'

>>> Failed to emerge app-arch/xz-utils-5.2.2, Log file:

>>>  '/var/tmp/portage/app-arch/xz-utils-5.2.2/temp/build.log'


-----

Code:

 * Messages for package sys-apps/systemd-226-r2:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 *   CONFIG_AUTOFS4_FS:  is not set when it should be.
 *   CONFIG_DEVPTS_MULTIPLE_INSTANCES:   is not set when it should be.
 *   CONFIG_FANOTIFY:    is not set when it should be.
 *   CONFIG_FW_LOADER_USER_HELPER:       should not be set. But it is.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.

 * Messages for package app-arch/xz-utils-5.2.2:

 * ERROR: app-arch/xz-utils-5.2.2::gentoo failed (configure phase):
 *   econf failed
 *
 * Call stack:
 *               ebuild.sh, line  133:  Called src_configure
 *             environment, line 2763:  Called multilib-minimal_src_configure
 *             environment, line 2056:  Called multilib_foreach_abi 'multilib-minimal_abi_src_configure'
 *             environment, line 2270:  Called multibuild_foreach_variant '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_                          configure'
 *             environment, line 1986:  Called _multibuild_run '_multilib_multibuild_wrapper' 'multilib-minimal_abi_src_configure'
 *             environment, line 1984:  Called _multilib_multibuild_wrapper 'multilib-minimal_abi_src_configure'
 *             environment, line  379:  Called multilib-minimal_abi_src_configure
 *             environment, line 2050:  Called multilib_src_configure
 *             environment, line 2483:  Called econf '--disable-nls' '--enable-threads' '--disable-static'
 *        phase-helpers.sh, line  662:  Called __helpers_die 'econf failed'
 *   isolated-functions.sh, line  117:  Called die
 * The specific snippet of code:
 *              die "$@"
 *
 * If you need support, post the output of `emerge --info '=app-arch/xz-utils-5.2.2::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=app-arch/xz-utils-5.2.2::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/app-arch/xz-utils-5.2.2/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/app-arch/xz-utils-5.2.2/temp/environment'.
 * Working directory: '/var/tmp/portage/app-arch/xz-utils-5.2.2/work/xz-5.2.2-abi_x86_64.amd64'
 * S: '/var/tmp/portage/app-arch/xz-utils-5.2.2/work/xz-5.2.2'



So what can I do to solve that strange problem???
Thank you for help...
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 7094
Location: Saint Amant, Acadiana

PostPosted: Mon May 23, 2016 1:19 am    Post subject: Reply with quote

Quote:
* If you need support, post the output of `emerge --info '=app-arch/xz-utils-5.2.2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-arch/xz-utils-5.2.2::gentoo'`.

Following above instructions would help. Use wgetpaste to post links to logs, they are too big to fit forum posts.
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
gentooF1_
n00b
n00b


Joined: 22 May 2016
Posts: 7

PostPosted: Mon May 23, 2016 10:09 am    Post subject: New Install - PROBLEM - Updating the @world set Reply with quote

This is what I get when I tape:

Code:


(chroot) livecd / # emerge --info '=app-arch/xz-utils-5.2.2::gentoo'
Portage 2.2.28 (python 3.4.3-final-0, default/linux/amd64/13.0/systemd, gcc-4.9.3-vanilla, glibc-2.22-r4, 4.4.6-gentoo x86_64)
=================================================================
                         System Settings
=================================================================
System uname: Linux-4.4.6-gentoo-x86_64-Intel-R-_Core-TM-_i3_CPU_540_@_3.07GHz-with-gentoo-2.2
KiB Mem:     3849324 total,   1168160 free
KiB Swap:     524284 total,    524064 free
Timestamp of repository gentoo: Sun, 22 May 2016 12:00:02 +0000
sh bash 4.3_p42-r1
ld GNU ld (Gentoo 2.25.1 p1.1) 2.25.1
app-shells/bash:          4.3_p42-r1::gentoo
dev-lang/perl:            5.20.2::gentoo
dev-lang/python:          2.7.10-r1::gentoo, 3.4.3-r1::gentoo
dev-util/pkgconfig:       0.28-r2::gentoo
sys-apps/baselayout:      2.2::gentoo
sys-apps/openrc:          0.19.1::gentoo
sys-apps/sandbox:         2.10-r1::gentoo
sys-devel/autoconf:       2.69::gentoo
sys-devel/automake:       1.14.1::gentoo, 1.15::gentoo
sys-devel/binutils:       2.25.1-r1::gentoo
sys-devel/gcc:            4.9.3::gentoo
sys-devel/gcc-config:     1.7.3::gentoo
sys-devel/libtool:        2.4.6::gentoo
sys-devel/make:           4.1-r1::gentoo
sys-kernel/linux-headers: 4.3::gentoo (virtual/os-headers)
sys-libs/glibc:           2.22-r4::gentoo
Repositories:

gentoo
    location: /usr/portage
    sync-type: rsync
    sync-uri: rsync://rsync.gentoo.org/gentoo-portage
    priority: -1000

ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="march=core2 -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/env.d /etc/gconf /etc/gentoo-release /etc/sandbox.d /etc/terminfo"
CXXFLAGS="march=core2 -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch pr                          eserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox                           usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="http://gd.tuwien.ac.at/opsys/linux/gentoo/ http://gentoo.supp.name/ rsync://ftp.fi.muni.cz/pub/linux/gentoo/ ftp://                          gentoo.wheel.sk/pub/linux/gentoo/"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j3"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --st                          ats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"


USE="acl acpi amd64 apache apache2 berkdb bindist bzip2 cli cracklib crypt ctype cxx dri exif filter fortran ftp gd gdbm gif iconv                           imap ipv6 jpeg libwww maildir mmx mmxext modules multilib mysql ncurses openmp pam pcre php pic png postgres prefork readline samba                           sasl seccomp session sse sse2 ssl systemd tcpd threads tokenizer truetype udev unicode usb worker xattr xml xmlreader zlib" ABI_X8                          6="64" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel i                          ntel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb uni                          xd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz                          _host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache                           filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdi                          r usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2"                           COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOL                          S="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm                          104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES                          ="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimi                          zer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-5" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_4"                           RUBY_TARGETS="ruby20 ruby21" USERLAND="GNU" VIDEO_CARDS="amdgpu fbdev intel nouveau radeon radeonsi vesa dummy v4l" XTABLES_ADDONS                          ="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark                           dhcpmac delude chaos account"
Unset:  CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, POR                          TAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON

=================================================================
                        Package Settings
=================================================================

app-arch/xz-utils-5.2.2::gentoo was built with the following:
USE="nls threads -static-libs" ABI_X86="64 -32 -x32"
CFLAGS="-O2 -pipe"
CXXFLAGS="-O2 -pipe"



Code:


(chroot) livecd / # emerge -pqv '=app-arch/xz-utils-5.2.2::gentoo'
[ebuild   R   ] app-arch/xz-utils-5.2.2  USE="threads -nls* -static-libs" ABI_X86="(64) -32 (-x32)"

!!! The following installed packages are masked:
- sys-fs/eudev-3.1.5::gentoo (masked by: package.mask)
/usr/portage/profiles/targets/systemd/package.mask:
# Pacho Ramos <pacho@gentoo.org> (21 Apr 2015)
# This is for running sys-apps/systemd and also helps
# portage to not try to pull in other providers leading to
# strange blockers.

For more information, see the MASKED PACKAGES section in the emerge
man page or refer to the Gentoo Handbook.

(chroot) livecd / #

Back to top
View user's profile Send private message
Buffoon
Veteran
Veteran


Joined: 17 Jun 2015
Posts: 1074
Location: EU or US

PostPosted: Mon May 23, 2016 11:36 am    Post subject: Reply with quote

Jaglover wrote:
Quote:
* If you need support, post the output of `emerge --info '=app-arch/xz-utils-5.2.2::gentoo'`,
* the complete build log and the output of `emerge -pqv '=app-arch/xz-utils-5.2.2::gentoo'`.

Following above instructions would help. Use wgetpaste to post links to logs, they are too big to fit forum posts.
Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 7972
Location: ~Brussels - Belgique

PostPosted: Mon May 23, 2016 11:39 am    Post subject: Reply with quote

Hi,

Your CFLAGS have a typo: it should be
Code:
CFLAGS="-march=core2 -O2 -pipe"
and not
Code:
CFLAGS="march=core2 -O2 -pipe"

_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
gentooF1_
n00b
n00b


Joined: 22 May 2016
Posts: 7

PostPosted: Mon May 23, 2016 12:02 pm    Post subject: Reply with quote

That was the case that did not upgrade with emerge.
The problem was really that minus before march: -march


Now I have new problems that are listed down, help me what to do, because I don't know what to do:

Code:


checking whether we are cross compiling...
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/build-x86/config.log
econf failed
 * ERROR: sys-apps/sandbox-2.10-r1::gentoo failed (compile phase):
 *   (no error message)
 *
 * Call stack:
 *     ebuild.sh, line  133:  Called src_compile
 *   environment, line 2591:  Called multijob_child_init 'sb_configure'
 *   environment, line 1955:  Called sb_configure
 *   environment, line 2551:  Called die
 * The specific snippet of code:
 *       ECONF_SOURCE="${S}" econf ${myconf} || die
 *
no
 * If you need support, post the output of `emerge --info '=sys-apps/sandbox-2.10-r1::gentoo'`,
checking for suffix of object files...  * the complete build log and the output of `emerge -pqv '=sys-apps/sandbox-2.10-r1::gentoo'`.
 * If configure failed with a 'cannot run C compiled programs' error, try this:
 * FEATURES='-sandbox -usersandbox' emerge sandbox
 * The complete build log is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/build-x86'
 * S: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10'
o
checking whether we are using the GNU C compiler... yes



Code:


>>> Failed to emerge sys-apps/sandbox-2.10-r1, Log file:

>>>  '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/build.log'

 * Messages for package sys-apps/systemd-226-r2:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 *   CONFIG_AUTOFS4_FS:  is not set when it should be.
 *   CONFIG_DEVPTS_MULTIPLE_INSTANCES:   is not set when it should be.
 *   CONFIG_FANOTIFY:    is not set when it should be.
 *   CONFIG_FW_LOADER_USER_HELPER:       should not be set. But it is.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.

 * Messages for package sys-apps/baselayout-2.2:

 * You should reboot the system now to get /run mounted with tmpfs!

 * Messages for package sys-libs/timezone-data-2016c:

 * You do not have TIMEZONE set in /etc/timezone.
 * Skipping auto-update of /etc/localtime.

 * Messages for package sys-apps/sandbox-2.10-r1:

 * ERROR: sys-apps/sandbox-2.10-r1::gentoo failed (compile phase):
 *   (no error message)
 *
 * Call stack:
 *     ebuild.sh, line  133:  Called src_compile
 *   environment, line 2591:  Called multijob_child_init 'sb_configure'
 *   environment, line 1955:  Called sb_configure
 *   environment, line 2551:  Called die
 * The specific snippet of code:
 *       ECONF_SOURCE="${S}" econf ${myconf} || die
 *
 * If you need support, post the output of `emerge --info '=sys-apps/sandbox-2.10-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-apps/sandbox-2.10-r1::gentoo'`.
 * If configure failed with a 'cannot run C compiled programs' error, try this:
 * FEATURES='-sandbox -usersandbox' emerge sandbox
 * The complete build log is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/build-x86'
 * S: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10'

 * Regenerating GNU info directory index...
 * Processed 88 info files.
 * After world updates, it is important to remove obsolete packages with
 * emerge --depclean. Refer to `man emerge` for more information.
(chroot) livecd / # nano /var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/build.log

Back to top
View user's profile Send private message
xaviermiller
Administrator
Administrator


Joined: 23 Jul 2004
Posts: 7972
Location: ~Brussels - Belgique

PostPosted: Mon May 23, 2016 12:06 pm    Post subject: Reply with quote

what are your CFLAGS now ?
_________________
Kind regards,
Xavier Miller
Back to top
View user's profile Send private message
gentooF1_
n00b
n00b


Joined: 22 May 2016
Posts: 7

PostPosted: Mon May 23, 2016 12:07 pm    Post subject: Reply with quote

Now I am postting the whjole LOG of SANDBOX:

Code:

^[[32;01m * ^[[39;49;00mPackage:    sys-apps/sandbox-2.10-r1
^[[32;01m * ^[[39;49;00mRepository: gentoo
^[[32;01m * ^[[39;49;00mMaintainer: sandbox@gentoo.org
^[[32;01m * ^[[39;49;00mUSE:        abi_x86_64 amd64 elibc_glibc kernel_linux multilib userland_GNU
^[[32;01m * ^[[39;49;00mFEATURES:   preserve-libs sandbox userpriv usersandbox
>>> Unpacking source...
>>> Unpacking sandbox-2.10.tar.xz to /var/tmp/portage/sys-apps/sandbox-2.10-r1/work
 ^[[32;01m*^[[0m Applying sandbox-2.10-memory-corruption.patch ...
^[[A^[[123C ^[[34;01m[ ^[[32;01mok^[[34;01m ]^[[0m
 ^[[32;01m*^[[0m Applying sandbox-2.10-disable-same.patch ...
^[[A^[[123C ^[[34;01m[ ^[[32;01mok^[[34;01m ]^[[0m
>>> Source unpacked in /var/tmp/portage/sys-apps/sandbox-2.10-r1/work
>>> Compiling source in /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10 ...
 ^[[32;01m*^[[0m Configuring sandbox for ABI=amd64...
 * econf: updating sandbox-2.10/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating sandbox-2.10/config.sub with /usr/share/gnuconfig/config.sub
 ^[[32;01m*^[[0m Configuring sandbox for ABI=x86...
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/configure --prefix=/usr --build=x86_64-pc-linux-gnu --host=x86_64-pc-linux-gnu --mandir=/usr/sha$
 * econf: updating sandbox-2.10/config.guess with /usr/share/gnuconfig/config.guess
 * econf: updating sandbox-2.10/config.sub with /usr/share/gnuconfig/config.sub
/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10/configure --prefix=/usr --build=i686-pc-linux-gnu --host=i686-pc-linux-gnu --mandir=/usr/share/m$
checking for a BSD-compatible install... /var/tmp/portage/._portage_reinstall_.l1ey9wje/bin/ebuild-helpers/xattr/install -c
checking whether build environment is sane... checking for a BSD-compatible install... yes
checking for a thread-safe mkdir -p... /var/tmp/portage/._portage_reinstall_.l1ey9wje/bin/ebuild-helpers/xattr/install -c
checking whether build environment is sane... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
yes
checking for a thread-safe mkdir -p... checking whether make supports nested variables... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
yes
checking whether make supports nested variables... (cached) yes
checking environment state... checking whether make supports nested variables... ok
checking for x86_64-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc
yes
checking whether make supports nested variables... (cached) yes
checking environment state... ok
checking for i686-pc-linux-gnu-gcc... x86_64-pc-linux-gnu-gcc -m32
checking whether the C compiler works... checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables... no
configure: error: in `/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/build-x86':
configure: error: C compiler cannot create executables
See `config.log' for more details

checking whether we are cross compiling...
!!! Please attach the following file when seeking support:
!!! /var/tmp/portage/sys-apps/sandbox-2.10-r1/work/build-x86/config.log
econf failed
 ^[[31;01m*^[[0m ERROR: sys-apps/sandbox-2.10-r1::gentoo failed (compile phase):
 ^[[31;01m*^[[0m   (no error message)
 ^[[31;01m*^[[0m
 ^[[31;01m*^[[0m Call stack:
 ^[[31;01m*^[[0m     ebuild.sh, line  133:  Called src_compile
 ^[[31;01m*^[[0m   environment, line 2591:  Called multijob_child_init 'sb_configure'
 ^[[31;01m*^[[0m   environment, line 1955:  Called sb_configure
 ^[[31;01m*^[[0m   environment, line 2551:  Called die
 ^[[31;01m*^[[0m The specific snippet of code:
 ^[[31;01m*^[[0m       ECONF_SOURCE="${S}" econf ${myconf} || die
 ^[[31;01m*^[[0m
no
 ^[[31;01m*^[[0m If you need support, post the output of `emerge --info '=sys-apps/sandbox-2.10-r1::gentoo'`,
checking for suffix of object files...  ^[[31;01m*^[[0m the complete build log and the output of `emerge -pqv '=sys-apps/sandbox-2.10-r1::gentoo'`.
 ^[[33;01m*^[[0m If configure failed with a 'cannot run C compiled programs' error, try this:
 ^[[33;01m*^[[0m FEATURES='-sandbox -usersandbox' emerge sandbox
 ^[[31;01m*^[[0m The complete build log is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/build.log'.
 ^[[31;01m*^[[0m The ebuild environment file is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/environment'.
 ^[[31;01m*^[[0m Working directory: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/build-x86'
 ^[[31;01m*^[[0m S: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10'
o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-pc-linux-gnu-gcc accepts -g... yes
checking for x86_64-pc-linux-gnu-gcc option to accept ISO C89... none needed
checking whether x86_64-pc-linux-gnu-gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of x86_64-pc-linux-gnu-gcc... gcc3
checking for library containing strerror... none required
checking how to run the C preprocessor... x86_64-pc-linux-gnu-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes

checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for x86_64-pc-linux-gnu-ar... x86_64-pc-linux-gnu-ar
checking the archiver (x86_64-pc-linux-gnu-ar) interface... ar
checking whether make sets $(MAKE)... (cached) yes
checking for gawk... (cached) gawk
checking for egrep... (cached) /bin/grep -E
checking for readelf... readelf
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking how to print strings... printf
checking for a sed that does not truncate output... /bin/sed
checking for fgrep... /bin/grep -F
checking for ld used by x86_64-pc-linux-gnu-gcc... /usr/x86_64-pc-linux-gnu/bin/ld
checking if the linker (/usr/x86_64-pc-linux-gnu/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/x86_64-pc-linux-gnu-nm -B
checking the name lister (/usr/bin/x86_64-pc-linux-gnu-nm -B) interface... BSD nm
checking whether ln -s works... yes

checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for /usr/x86_64-pc-linux-gnu/bin/ld option to reload object files... -r
checking for x86_64-pc-linux-gnu-objdump... x86_64-pc-linux-gnu-objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-pc-linux-gnu-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-pc-linux-gnu-ar... (cached) x86_64-pc-linux-gnu-ar
checking for archiver @FILE support... @
checking for x86_64-pc-linux-gnu-strip... x86_64-pc-linux-gnu-strip
checking for x86_64-pc-linux-gnu-ranlib... x86_64-pc-linux-gnu-ranlib
checking command to parse /usr/bin/x86_64-pc-linux-gnu-nm -B output from x86_64-pc-linux-gnu-gcc object... ok
checking for sysroot... no
checking for a working dd... /bin/dd
checking how to truncate binary pipes... /bin/dd bs=4096 count=1
checking for x86_64-pc-linux-gnu-mt... no
checking for mt... no
checking if : is a manifest tool... no
checking for dlfcn.h... yes
checking for objdir... .libs
checking if x86_64-pc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for x86_64-pc-linux-gnu-gcc option to produce PIC... -fPIC -DPIC
checking if x86_64-pc-linux-gnu-gcc PIC flag -fPIC -DPIC works... yes
checking if x86_64-pc-linux-gnu-gcc static flag -static works... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... yes
checking if x86_64-pc-linux-gnu-gcc supports -c -o file.o... (cached) yes

checking whether the x86_64-pc-linux-gnu-gcc linker (/usr/x86_64-pc-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether to use pre-compiled sandbox headers... yes
checking for multiple personalities... auto
checking checking for x86_64/-m64 compiler support... yes
checking checking for x86/-m32 compiler support... no
checking checking for x32/-mx32 compiler support... no
checking for size_t... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking for dirent.h... yes
checking for dlfcn.h... (cached) yes
checking for elf.h... yes
checking for errno.h... yes
checking for execinfo.h... yes
checking for fcntl.h... yes
checking for getopt.h... yes
checking for grp.h... yes

checking for inttypes.h... (cached) yes
checking for libgen.h... yes
checking for limits.h... yes
checking for memory.h... (cached) yes
checking for pthread.h... yes
checking for pwd.h... yes
checking for sched.h... yes
checking for siginfo.h... no
checking for signal.h... yes
checking for sigsegv.h... (cached) no
checking for stdarg.h... yes
checking for stdbool.h... yes
checking for stddef.h... yes
checking for stdint.h... (cached) yes
checking for stdio.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
checking for syscall.h... yes
checking for unistd.h... (cached) yes
checking for utime.h... yes
checking for sys/file.h... yes
checking for sys/ioctl.h... yes
checking for sys/mman.h... yes
checking for sys/mount.h... yes
checking for sys/param.h... yes
checking for sys/ptrace.h... yes
checking for sys/reg.h... yes

checking for sys/socket.h... yes
checking for sys/stat.h... (cached) yes
checking for sys/syscall.h... yes
checking for sys/time.h... yes
checking for sys/types.h... (cached) yes
checking for sys/uio.h... yes
checking for sys/user.h... yes
checking for sys/wait.h... (cached) yes
checking for asm/ptrace.h... yes
checking for linux/ptrace.h... yes
checking for an ANSI C-conforming const... yes
checking for uid_t in sys/types.h... yes
checking for mode_t... yes
checking for size_t... (cached) yes
checking whether environ is declared... yes
checking for ptrdiff_t... yes
checking for sighandler_t... yes
checking for sig_t... yes
checking for __sighandler_t... yes
checking for struct user_regs_struct... yes
checking for struct pt_regs... yes
checking size of struct user_regs_struct... 216
checking size of struct pt_regs... 168
checking for unistd.h... (cached) yes
checking for working chown... yes
checking for pid_t... yes
checking vfork.h usability... no
checking vfork.h presence... no

checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking whether lstat correctly handles trailing slash... yes
checking whether lstat accepts an empty string... no
checking whether lstat correctly handles trailing slash... (cached) yes
checking return type of signal handlers... void
checking whether stat accepts an empty string... no
checking for backtrace... yes
checking for clone... yes
checking for __clone2... no
checking for creat64... yes
checking for faccessat... yes
checking for fchmodat... yes
checking for fchownat... yes
checking for fopen64... yes
checking for ftruncate... yes
checking for futimesat... yes
checking for getcwd... yes
checking for lchown... yes
checking for linkat... yes
checking for lutimes... yes
checking for memmove... yes
checking for memcpy... yes
checking for memset... yes
checking for mkdir... yes

checking for mkdirat... yes
checking for mkdtemp... yes
checking for mkfifoat... yes
checking for mknodat... yes
checking for mkostemp... yes
checking for mkostemp64... yes
checking for mkostemps... yes
checking for mkostemps64... yes
checking for mkstemp... yes
checking for mkstemp64... yes
checking for mkstemps... yes
checking for mkstemps64... yes
checking for open64... yes
checking for openat... yes
checking for openat64... yes
checking for pathconf... yes
checking for process_vm_readv... yes
checking for ptrace... yes
checking for realpath... yes
checking for remove... yes
checking for renameat... yes
checking for rmdir... yes
checking for setenv... yes
checking for strcasecmp... yes
checking for strchr... yes
checking for strdup... yes
checking for strerror... yes
checking for strndup... yes


checking for strerror... yes
checking for strndup... yes
checking for strrchr... yes
checking for strspn... yes
checking for strstr... yes
checking for strtok_r... yes
checking for symlinkat... yes
checking for truncate64... yes
checking for unlinkat... yes
checking for unshare... yes
checking for utime... yes
checking for utimensat... yes
checking for utimes... yes
checking for stackoverflow_install_handler in -lsigsegv... (cached) false
checking for __sync_lock_test_and_set... yes
checking for va_copy... va_copy
checking for library containing dlopen... -ldl
checking for dlvsym... yes
checking truncate argument type... off_t
checking for RTLD_NEXT... yes
checking libc path... /lib64/libc.so.6
checking libc version... libc.so.6
checking for /proc/self/fd... yes
checking for /dev/fd... yes
checking for /proc/self/cmdline... yes
checking for /proc/1/cmdline... yes
checking for /proc/1089/cmdline... yes
checking how to enable exception handling... -fexceptions
checking CFLAGS for maximum warnings... -Wall
checking whether C compiler accepts -Winvalid-pch... yes

checking whether C compiler accepts -fdata-sections... yes
checking whether C compiler accepts -ffunction-sections... yes
checking whether C compiler accepts -fno-builtin-calloc... yes
checking whether C compiler accepts -fno-builtin-malloc... yes
checking whether C compiler accepts -fno-builtin-realloc... yes
checking whether the linker accepts -Wl,--as-needed... yes
checking whether the linker accepts -Wl,--gc-sections... yes
checking whether the linker accepts -Wl,--no-undefined... yes
checking whether the linker accepts -Wl,--version-script,conftest.map... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating src/sandbox.sh
config.status: creating Makefile
config.status: creating data/Makefile
config.status: creating etc/Makefile
config.status: creating etc/sandbox.d/00default
config.status: creating etc/sandbox.d/Makefile
config.status: creating libsandbox/Makefile
config.status: creating libsbutil/Makefile
config.status: creating scripts/Makefile
config.status: creating src/Makefile
config.status: creating tests/atlocal
config.status: creating tests/Makefile
config.status: creating tests/package.m4
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing tests/atconfig commands

Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7693
Location: Pelotas, BR

PostPosted: Mon May 23, 2016 12:11 pm    Post subject: Reply with quote

Code:
Unable to find kernel sources at /usr/src/linux


This is quite important. /usr/src/linux must be a soft link to your current kernel directory sources.

So if it is /usr/src/gentoo-sources-4.4.0, then you should make that link

Code:

ln -sf /usr/src/gentoo-sources-4.4.0 /usr/src/linux


The -s is for soft link, -f is to remove existing link if there is one (that would be broken anyway, as it is not finding your directory).
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
Buffoon
Veteran
Veteran


Joined: 17 Jun 2015
Posts: 1074
Location: EU or US

PostPosted: Mon May 23, 2016 12:19 pm    Post subject: Reply with quote

Are you still in chroot? You should boot into your Gentoo before doing all the updates.
Back to top
View user's profile Send private message
gentooF1_
n00b
n00b


Joined: 22 May 2016
Posts: 7

PostPosted: Mon May 23, 2016 12:20 pm    Post subject: Reply with quote

How can I procede with emerge world? I want just to continue where I finished to emerge??

Code:

emerge --ask --update --deep --newuse @world
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7693
Location: Pelotas, BR

PostPosted: Mon May 23, 2016 12:25 pm    Post subject: Reply with quote

Code:

       --keep-going [ y | n ]
              Continue as much as possible  after  an  error.  When  an  error
              occurs, dependencies are recalculated for remaining packages and
              any with unsatisfied  dependencies  are  automatically  dropped.
              Also see the related --skipfirst option.

_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
gentooF1_
n00b
n00b


Joined: 22 May 2016
Posts: 7

PostPosted: Mon May 23, 2016 1:31 pm    Post subject: Reply with quote

I am now on that step:
I just cannot emerge sandbox, gcc and glibc...
What can I do?

Code:


(chroot) livecd / # emerge --ask --update --deep --newuse --keep-going @world

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild   R    ] sys-apps/sandbox-2.10-r1  USE="(multilib*)"
[ebuild   R    ] sys-devel/gcc-4.9.3  USE="fortran* (multilib*) sanitize* vtv* (-hardened*) -nls* -nptl*"
[ebuild   R    ] sys-libs/glibc-2.22-r4  USE="gd* (multilib*) (-hardened*)"

Would you like to merge these packages? [Yes/No] n

Quitting.

(chroot) livecd / #





Code:


/usr/include/gnu/stubs.h:7:27: fatal error: gnu/stubs-32.h: No such file or directory
 # include <gnu/stubs-32.h>
                           ^
compilation terminated.
Makefile:165: recipe for target '/var/tmp/portage/sys-libs/glibc-2.22-r4/work/build-x86-x86_64-pc-linux-gnu-nptl/sun                                         rpc/cross-rpc_main.o' failed
make[2]: *** [/var/tmp/portage/sys-libs/glibc-2.22-r4/work/build-x86-x86_64-pc-linux-gnu-nptl/sunrpc/cross-rpc_main.                                         o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: Leaving directory '/var/tmp/portage/sys-libs/glibc-2.22-r4/work/glibc-2.22/sunrpc'
Makefile:214: recipe for target 'sunrpc/others' failed
make[1]: *** [sunrpc/others] Error 2
make[1]: Leaving directory '/var/tmp/portage/sys-libs/glibc-2.22-r4/work/glibc-2.22'
Makefile:9: recipe for target 'all' failed
make: *** [all] Error 2
make: Leaving directory '/var/tmp/portage/sys-libs/glibc-2.22-r4/work/build-x86-x86_64-pc-linux-gnu-nptl'
 * ERROR: sys-libs/glibc-2.22-r4::gentoo failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=sys-libs/glibc-2.22-r4::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.22-r4::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.22-r4/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.22-r4/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-libs/glibc-2.22-r4/work/glibc-2.22'
 * S: '/var/tmp/portage/sys-libs/glibc-2.22-r4/work/glibc-2.22'

>>> Failed to emerge sys-libs/glibc-2.22-r4, Log file:

>>>  '/var/tmp/portage/sys-libs/glibc-2.22-r4/temp/build.log'

 * Messages for package sys-apps/sandbox-2.10-r1:

 * ERROR: sys-apps/sandbox-2.10-r1::gentoo failed (compile phase):
 *   (no error message)
 *
 * Call stack:
 *     ebuild.sh, line  133:  Called src_compile
 *   environment, line 2591:  Called multijob_child_init 'sb_configure'
 *   environment, line 1955:  Called sb_configure
 *   environment, line 2551:  Called die
 * The specific snippet of code:
 *       ECONF_SOURCE="${S}" econf ${myconf} || die
 *
 * If you need support, post the output of `emerge --info '=sys-apps/sandbox-2.10-r1::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-apps/sandbox-2.10-r1::gentoo'`.
 * If configure failed with a 'cannot run C compiled programs' error, try this:
 * FEATURES='-sandbox -usersandbox' emerge sandbox
 * The complete build log is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/build-x86'
 * S: '/var/tmp/portage/sys-apps/sandbox-2.10-r1/work/sandbox-2.10'

 * Messages for package sys-devel/gcc-4.9.3:

 * ERROR: sys-devel/gcc-4.9.3::gentoo failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=sys-devel/gcc-4.9.3::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-devel/gcc-4.9.3::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-devel/gcc-4.9.3/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-devel/gcc-4.9.3/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-devel/gcc-4.9.3/work/build'
 * S: '/var/tmp/portage/sys-devel/gcc-4.9.3/work/gcc-4.9.3'
 *
 * Please include /var/tmp/portage/sys-devel/gcc-4.9.3/work/gcc-build-logs.tar.bz2 in your bug report.
 *

 * Messages for package sys-libs/glibc-2.22-r4:

 * ERROR: sys-libs/glibc-2.22-r4::gentoo failed (compile phase):
 *   emake failed
 *
 * If you need support, post the output of `emerge --info '=sys-libs/glibc-2.22-r4::gentoo'`,
 * the complete build log and the output of `emerge -pqv '=sys-libs/glibc-2.22-r4::gentoo'`.
 * The complete build log is located at '/var/tmp/portage/sys-libs/glibc-2.22-r4/temp/build.log'.
 * The ebuild environment file is located at '/var/tmp/portage/sys-libs/glibc-2.22-r4/temp/environment'.
 * Working directory: '/var/tmp/portage/sys-libs/glibc-2.22-r4/work/glibc-2.22'
 * S: '/var/tmp/portage/sys-libs/glibc-2.22-r4/work/glibc-2.22'
 *
 * The following 3 packages have failed to build, install, or execute
 * postinst:
 *
 *  (sys-apps/sandbox-2.10-r1:0/0::gentoo, ebuild scheduled for merge), Log file:
 *   '/var/tmp/portage/sys-apps/sandbox-2.10-r1/temp/build.log'
 *  (sys-devel/gcc-4.9.3:4.9.3/4.9.3::gentoo, ebuild scheduled for merge), Log file:
 *   '/var/tmp/portage/sys-devel/gcc-4.9.3/temp/build.log'
 *  (sys-libs/glibc-2.22-r4:2.2/2.2::gentoo, ebuild scheduled for merge), Log file:
 *   '/var/tmp/portage/sys-libs/glibc-2.22-r4/temp/build.log'
 *
(chroot) livecd / #

Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7693
Location: Pelotas, BR

PostPosted: Mon May 23, 2016 1:39 pm    Post subject: Reply with quote

That missing files belongs to glibc. You won' t be able to emerge it without itself working. Sort of an egg and chicken problem.

You will probably need to build a binary package somewhere else and then install it in your current system.

I am going to test something and get back to you soon. Meanwhile, I suggest that you start reading the Binary Package Guide.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7693
Location: Pelotas, BR

PostPosted: Mon May 23, 2016 1:59 pm    Post subject: Reply with quote

You can generate the binary packages from a stage 3 tarball. I just downloaded one, uncompressed it in a directory and then did this (suppose the directory is /home/pilla/womb):

Code:

sudo mount -o bind /dev /home/pilla/womb/dev
sudo mount -o bind /proc /home/pilla/womb/proc % not sure it is really required though
sudo chroot /home/pilla/womb
quickpkg sys-devel/gcc
quickpkg sys-libs/glibc
quickpkg sys-apps/sandbox


Then you should have binary packages for these three packages. You can copy then from /home/pilla/womb/portage/packages/* (change it to fit your setup) to your installation /usr/portage/packages/* and install those packages:

Code:

cp -R /home/pilla/womb/portage/packages/* /usr/portage/packages/
emerge --usepkgonly glibc gcc sandbox


Note that I am only sure about glibc needing it.

I can provide you with the binpkgs for these three ebuilds if you want, but it is not usually a good idea to thrust strangers for binary packages that you cannot validate in a sane way.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
gentooF1_
n00b
n00b


Joined: 22 May 2016
Posts: 7

PostPosted: Mon May 23, 2016 3:17 pm    Post subject: Reply with quote

Thank you for splendid help, but I cannot see the results.
I typed:

Code:

(chroot) livecd womb # sudo mount -o bind /dev /home/vitomir/womb/dev
(chroot) livecd womb # sudo mount -o bind /proc /home/vitomir/womb/proc
(chroot) livecd womb # sudo chroot /home/vitomir/womb
livecd / # quickpkg sys-devel/gcc
!!! Section 'x-portage' in repos.conf has location attribute set to nonexistent directory: '/usr/portage'
!!! Section 'gentoo' in repos.conf has location attribute set to nonexistent directory: '/usr/portage'
!!! Invalid Repository Location (not a dir): '/usr/portage'
 * Building package for sys-devel/gcc-4.9.3 ...                                                              [ ok ]

 * Packages now in '/usr/portage/packages':
 * sys-devel/gcc-4.9.3: 26.5M
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7693
Location: Pelotas, BR

PostPosted: Mon May 23, 2016 3:38 pm    Post subject: Reply with quote

If you go out of your chroot, you can find the tbz2 with the binaries in /home/vitomir/womb/usr/portage/packages/sys-devel/gcc/. Just copy it to your /usr/portage/packages/sys-devel/gcc/ and then run your emerge --usepkgonly gcc.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
grumpie
n00b
n00b


Joined: 15 May 2016
Posts: 4
Location: Weert, NL

PostPosted: Mon May 23, 2016 4:07 pm    Post subject: Reply with quote

Hi, first post here.

Code:

 * Unable to find kernel sources at /usr/src/linux
 * Unable to calculate Linux Kernel version for build, attempting to use running version
 *   CONFIG_AUTOFS4_FS:  is not set when it should be.
 *   CONFIG_DEVPTS_MULTIPLE_INSTANCES:   is not set when it should be.
 *   CONFIG_FANOTIFY:    is not set when it should be.
 *   CONFIG_FW_LOADER_USER_HELPER:       should not be set. But it is.
 * Please check to make sure these options are set correctly.
 * Failure to do so may cause unexpected problems.

 * Messages for package sys-apps/baselayout-2.2:

 * You should reboot the system now to get /run mounted with tmpfs!

 * Messages for package sys-libs/timezone-data-2016c:

 * You do not have TIMEZONE set in /etc/timezone.
 * Skipping auto-update of /etc/localtime.

This happened to me also at the same part of the installation. The problem occurs if you switch away from the minimal profile set when you downloaded the tarball.
if you switch to i.e. 'default/linux/amd64/13.0/desktop' and do the world update, a load of packages ought to be emerged.
Using '--keep-going' will get you through the emerge, but you will get the messages as shown. Which makes sense, because no kernel is installed at this point in the installation,
nor is any configuration set. Better is to keep the minimal profile untill you have xorg-server and video-card set.
Just my 2 cents.....[/code]
Back to top
View user's profile Send private message
Buffoon
Veteran
Veteran


Joined: 17 Jun 2015
Posts: 1074
Location: EU or US

PostPosted: Mon May 23, 2016 4:45 pm    Post subject: Reply with quote

This happens because common sense is ignored. People want to install everything in chroot - why?!

You install the base system including kernel build.
You reboot into your Gentoo.
You apply updates to system, even better, run emerge -e @system with your freshly cooked make.conf
And now you are ready to install software!
Back to top
View user's profile Send private message
grumpie
n00b
n00b


Joined: 15 May 2016
Posts: 4
Location: Weert, NL

PostPosted: Mon May 23, 2016 5:01 pm    Post subject: Reply with quote

Buffoon wrote:
This happens because common sense is ignored. People want to install everything in chroot - why?!


As the OP is opting for systemd he has to do so according to the installation guide.
https://wiki.gentoo.org/wiki/Handbook:AMD64/Full/Installation#Updating_the_.40world_set
Back to top
View user's profile Send private message
Buffoon
Veteran
Veteran


Joined: 17 Jun 2015
Posts: 1074
Location: EU or US

PostPosted: Mon May 23, 2016 5:04 pm    Post subject: Reply with quote

I think this installation guide should be revised then. I'd hold back until my Gentoo can boot in its own before switching to systemd.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43223
Location: 56N 3W

PostPosted: Mon May 23, 2016 5:34 pm    Post subject: Reply with quote

Buffoon,

Yep, the install until reboot should be common regardless of wanting systemd or not.

I tend to set my profile early in the install, so its there for the few packages that get installed before the reboot, then do the rebuilding for the new profile after.
Users wanting to switch to systemd should take some comfort that the install actually boots with openrc.
That means that after the systemd switch, its a systemd problem if it won't boot.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Ant P.
Watchman
Watchman


Joined: 18 Apr 2009
Posts: 5770

PostPosted: Mon May 23, 2016 7:21 pm    Post subject: Reply with quote

I think a bigger problem is that the OP is trying to install a multilib gentoo from a no-multilib stage3.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43223
Location: 56N 3W

PostPosted: Tue May 24, 2016 7:04 pm    Post subject: Reply with quote

Ant P.

Ahh, so thare are no 32 bit libs to support a 32 bit toolchain.
That's a reinstall to fix, or stick to 64 bit only.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum