Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Kernel compile module error for help.
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
liuxk
n00b
n00b


Joined: 28 Jul 2016
Posts: 13

PostPosted: Tue Aug 09, 2016 5:10 am    Post subject: Kernel compile module error for help. Reply with quote

With reference to the official document, it is only used as a partition.

error :
Code:

-----------------------------------

 ERROR: Failed to compile the "modules" target...
*
* -- Grepping log... --
*
*  SHIPPED scripts/kconfig/zconf.lex.c
*  SHIPPED scripts/kconfig/zconf.hash.c
*  HOSTCC  scripts/kconfig/zconf.tab.o
*  HOSTLD  scripts/kconfig/conf
*scripts/kconfig/conf  --oldconfig Kconfig
*.config:76:warning: override: reassigning to symbol UV_MMTIMER
*.config:125:warning: symbol value 'm' invalid for X86_INTEL_PSTATE
*.config:2390:warning: override: FB_MB862XX_LIME changes choice state
*.config:2811:warning: symbol value 'm' invalid for AB3100_CORE
*.config:2820:warning: symbol value 'm' invalid for MFD_WM8400
*.config:2821:warning: symbol value 'm' invalid for MFD_WM8350_I2C
*.config:2822:warning: symbol value 'm' invalid for MFD_WM8350
*.config:2823:warning: symbol value 'm' invalid for MFD_WM831X
*.config:3460:warning: symbol value 'm' invalid for POWER_SUPPLY
*--
*Allow for memory compaction (COMPACTION) [Y/n/?] y
*  Page migration (MIGRATION) [Y/?] y
*Enable bounce buffers (BOUNCE) [Y/n/?] (NEW)
*Enable KSM for page merging (KSM) [Y/n/?] y
*Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096                                                                                                 ] 4096
*Enable recovery from hardware memory errors (MEMORY_FAILURE) [Y/n/?] y
*--
*  Debug Statements (ACPI_DEBUG) [N/y/?] (NEW)
*  PCI slot detection driver (ACPI_PCI_SLOT) [Y/n/?] y
*  Container and Module Devices (ACPI_CONTAINER) [Y/?] (NEW) y
*  Memory Hotplug (ACPI_HOTPLUG_MEMORY) [Y/n/?] y
*  Smart Battery System (ACPI_SBS) [N/m/y/?] (NEW)
*  Hardware Error Device (ACPI_HED) [Y/?] y
*  Allow ACPI methods to be inserted/replaced at run time (ACPI_CUSTOM_METHOD) [                                                                                                 N/m/y/?] (NEW)
*  Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] (NEW)
*  ACPI NVDIMM Firmware Interface Table (NFIT) (ACPI_NFIT) [N/m/y/?] (NEW)
*  ACPI Platform Error Interface (APEI) (ACPI_APEI) [Y/n/?] y
*    APEI Generic Hardware Error Source (ACPI_APEI_GHES) [Y/n/?] y
*    APEI PCIe AER logging/recovering support (ACPI_APEI_PCIEAER) [Y/n/?] y
*    APEI memory error recovering support (ACPI_APEI_MEMORY_FAILURE) [Y/n/?] y
*    APEI Error INJection (EINJ) (ACPI_APEI_EINJ) [M/n/y/?] m
*    APEI Error Record Serialization Table (ERST) Debug Support (ACPI_APEI_ERST_                                                                                                 DEBUG) [M/n/y/?] m
*  Extended Error Log support (ACPI_EXTLOG) [N/m/y/?] (NEW)
*--
* Bus options (PCI etc.)
*
*PCI support (PCI) [Y/n/?] y
*  Support mmconfig PCI config space access (PCI_MMCONFIG) [N/y] (NEW)
*  PCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
*    Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
*      PCI Express ECRC settings control (PCIE_ECRC) [Y/n/?] y
*      PCIe AER error injector support (PCIEAER_INJECT) [M/n/y/?] m
*--
*      *
*      round-robin scheduling (IP_VS_RR) [M/n/?] m
*      weighted round-robin scheduling (IP_VS_WRR) [M/n/?] m
*      least-connection scheduling (IP_VS_LC) [M/n/?] m
*      weighted least-connection scheduling (IP_VS_WLC) [M/n/?] m
*      weighted failover scheduling (IP_VS_FO) [N/m/?] (NEW)
*--
*  * Wireless
*  *
*  Wireless (WIRELESS) [Y] y
*    cfg80211 - wireless configuration API (CFG80211) [M/n/?] m
*      nl80211 testmode command (NL80211_TESTMODE) [N/y/?] n
*      enable developer warnings (CFG80211_DEVELOPER_WARNINGS) [N/y/?] n
*--
*SCSI CDROM support (BLK_DEV_SR) [M/n/y/?] m
*  Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?                                                                                                 ] y
*SCSI generic support (CHR_DEV_SG) [M/n/y/?] m
*SCSI media changer support (CHR_DEV_SCH) [M/n/y/?] m
*SCSI Enclosure Support (SCSI_ENCLOSURE) [M/n/?] m
*Verbose SCSI error reporting (kernel size +=75K) (SCSI_CONSTANTS) [Y/n/?] y
*--
*  Compile All OSD modules with lots of DEBUG prints (SCSI_OSD_DEBUG) [N/y/?] n
*
* Serial ATA and Parallel ATA drivers (libata)
*
*Serial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
*  Verbose ATA error reporting (ATA_VERBOSE_ERROR) [Y/n/?] y
*--
*      IP-over-InfiniBand data path debugging (INFINIBAND_IPOIB_DEBUG_DATA) [N/y                                                                                                 /?] n
*  InfiniBand SCSI RDMA Protocol (INFINIBAND_SRP) [M/n/?] m
*  InfiniBand SCSI RDMA Protocol target support (INFINIBAND_SRPT) [N/m/?] (NEW)
*  iSCSI Extensions for RDMA (iSER) (INFINIBAND_ISER) [M/n/?] m
*
* EDAC (Error Detection And Correction) reporting
*
*EDAC (Error Detection And Correction) reporting (EDAC) [Y/n/?] y
*  EDAC legacy sysfs (EDAC_LEGACY_SYSFS) [Y/n/?] y
*  Debugging (EDAC_DEBUG) [N/y/?] n
*  Decode MCEs in human-readable form (only on AMD for now) (EDAC_DECODE_MCE) [M                                                                                                 /n/y/?] m
*  Main Memory EDAC (Error Detection And Correction) reporting (EDAC_MM_EDAC) [M                                                                                                 /n/y/?] m
*    AMD64 (Opteron, Athlon64) (EDAC_AMD64) [M/n/?] m
*      Sysfs HW Error injection facilities (EDAC_AMD64_ERROR_INJECTION) [Y/n/?]                                                                                                  y
*--
*  JFS statistics (JFS_STATISTICS) [N/y/?] n
*XFS filesystem support (XFS_FS) [M/n/y/?] m
*  XFS Quota support (XFS_QUOTA) [Y/n/?] y
*  XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
*  XFS Realtime subvolume support (XFS_RT) [N/y/?] n
*  XFS Verbose Warnings (XFS_WARN) [N/y/?] (NEW)
*--
*Inotify support for userspace (INOTIFY_USER) [Y/n/?] y
*Filesystem wide access notification (FANOTIFY) [Y/n/?] y
*  fanotify permissions checking (FANOTIFY_ACCESS_PERMISSIONS) [N/y/?] (NEW)
*Quota support (QUOTA) [Y/n/?] y
*Report quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [Y/n/                                                                                                 ?] y
*Print quota warnings to console (OBSOLETE) (PRINT_QUOTA_WARNING) [Y/n/?] y
*--
*torture tests for RCU (RCU_TORTURE_TEST) [N/m/y/?] n
*RCU CPU stall timeout in seconds (RCU_CPU_STALL_TIMEOUT) [21] (NEW)
*Enable tracing for RCU (RCU_TRACE) [N/y/?] n
*Provide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [                                                                                                 N/y/?] (NEW)
*Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y                                                                                                 /?] n
*Notifier error injection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] (NEW)
*--
*  CC      arch/x86/kernel/cpu/mcheck/mce-apei.o
*  LD      arch/x86/kernel/cpu/mcheck/built-in.o
*  CC      arch/x86/kernel/cpu/microcode/core.o
*  CC      arch/x86/kernel/cpu/microcode/intel.o
*arch/x86/kernel/cpu/microcode/intel.c: In function ‘save_mc_for_early’:
*arch/x86/kernel/cpu/microcode/intel.c:516:1: warning: the frame size of 1032 by                                                                                                 tes is larger than 1024 bytes [-Wframe-larger-than=]
* }
* ^
*arch/x86/kernel/cpu/microcode/intel.c: In function ‘get_matching_model_microcod                                                                                                 e.isra.2.constprop’:
*arch/x86/kernel/cpu/microcode/intel.c:348:1: warning: the frame size of 1032 by                                                                                                 tes is larger than 1024 bytes [-Wframe-larger-than=]
*--
*  CC      mm/migrate.o
*  CC      mm/page_counter.o
*  CC      mm/memcontrol.o
*  CC      mm/vmpressure.o
*  CC      mm/swap_cgroup.o
*  CC      mm/memory-failure.o
*--
*  CC      drivers/ras/ras.o
*  CC      drivers/ras/debugfs.o
*  LD      drivers/ras/built-in.o
*  CC      drivers/regulator/core.o
*drivers/regulator/core.c: In function ‘regulator_lock_supply’:
*drivers/regulator/core.c:142:6: warning: unused variable ‘i’ [-Wunused-variable                                                                                                 ]
*--
*In file included from /usr/include/stdio.h:936:0,
*                 from Documentation/mic/mpssd/mpssd.h:23,
*                 from Documentation/mic/mpssd/mpssd.c:41:
*In function ‘snprintf’,
*    inlined from ‘set_cmdline’ at Documentation/mic/mpssd/mpssd.c:1541:9:
*/usr/include/bits/stdio2.h:64:3: warning: call to __builtin___snprintf_chk will                                                                                                  always overflow destination buffer
*--
*  CC [M]  fs/jffs2/super.o
*  CC [M]  fs/jffs2/debug.o
*  CC [M]  fs/jffs2/wbuf.o
*  CC [M]  fs/jffs2/xattr.o
*fs/jffs2/xattr.c: In function ‘jffs2_build_xattr_subsystem’:
*fs/jffs2/xattr.c:887:1: warning: the frame size of 1120 bytes is larger than 10                                                                                                 24 bytes [-Wframe-larger-than=]
*--
*  LD [M]  drivers/dca/dca.o
*  CC [M]  drivers/dma/ioat/init.o
*  CC [M]  drivers/dma/ioat/dma.o
*  CC [M]  drivers/dma/ioat/prep.o
*drivers/dma/ioat/prep.c: In function ‘ioat_prep_pqxor’:
*drivers/dma/ioat/prep.c:682:1: warning: the frame size of 1048 bytes is larger                                                                                                  than 1024 bytes [-Wframe-larger-than=]


[Moderator edit: added [code] tags to preserve output layout. The spurious breaks inside lines were already present, probably from copying from a confused terminal. -Hu]
Back to top
View user's profile Send private message
Hu
Moderator
Moderator


Joined: 06 Mar 2007
Posts: 13830

PostPosted: Wed Aug 10, 2016 1:08 am    Post subject: Reply with quote

OP: what error do you need solved? I see some compiler warnings. I see no errors in the output you provided. I suggest that next time you redirect output to a file, then paste the file. That should protect you from breaks in the middle of words.
Back to top
View user's profile Send private message
liuxk
n00b
n00b


Joined: 28 Jul 2016
Posts: 13

PostPosted: Wed Aug 10, 2016 10:04 am    Post subject: Gentoo installed in a partition problem. Reply with quote

I installed Gentoo in the virtual machine before the official documents are in accordance with the four partitions, the entire installation process is no problem. I'm only a partition as "/" directory. I use Genk generative kernels at compile module wrong on the newspaper the seemingly related to the SCSI, seeking answers, and talk about what parts of a partition need official document with different settings.

[Moderator edit: Merged this post from a separate thread into this thread, per the link from original poster in the next post down. -Hu]
Back to top
View user's profile Send private message
liuxk
n00b
n00b


Joined: 28 Jul 2016
Posts: 13

PostPosted: Wed Aug 10, 2016 10:08 am    Post subject: Reply with quote

https://forums.gentoo.org/viewtopic-t-1049554.html 。 please.
Back to top
View user's profile Send private message
Hu
Moderator
Moderator


Joined: 06 Mar 2007
Posts: 13830

PostPosted: Thu Aug 11, 2016 1:39 am    Post subject: Reply with quote

I merged the other thread with this one since it has the same subject. Unfortunately, I do not understand your problem. Perhaps you could post it in your native language and let someone else translate it.
Back to top
View user's profile Send private message
liuxk
n00b
n00b


Joined: 28 Jul 2016
Posts: 13

PostPosted: Fri Aug 12, 2016 5:19 am    Post subject: error: Reply with quote

Code:
(chroot) livecd / # genkernel all
* Gentoo Linux Genkernel; Version 3.4.52.3
* Running with options: all

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* Linux Kernel 4.4.6-gentoo for x86_64...
* .. with config file /usr/share/genkernel/arch/x86_64/generated-config
* kernel: Using config from /usr/share/genkernel/arch/x86_64/generated-config
* kernel: >> Running mrproper...
*         >> Running oldconfig...
* kernel: >> Cleaning...
*         >> Compiling 4.4.6-gentoo bzImage...
*         >> Installing firmware ('make firmware_install') due to CONFIG_FIRMWARE_IN_KERNEL != y...
*         >> Compiling 4.4.6-gentoo modules...
* ERROR: Failed to compile the "modules" target...
*
* -- Grepping log... --
*
*  SHIPPED scripts/kconfig/zconf.lex.c
*  SHIPPED scripts/kconfig/zconf.hash.c
*  HOSTCC  scripts/kconfig/zconf.tab.o
*  HOSTLD  scripts/kconfig/conf
*scripts/kconfig/conf  --oldconfig Kconfig
*.config:76:warning: override: reassigning to symbol UV_MMTIMER
*.config:125:warning: symbol value 'm' invalid for X86_INTEL_PSTATE
*.config:2390:warning: override: FB_MB862XX_LIME changes choice state
*.config:2811:warning: symbol value 'm' invalid for AB3100_CORE
*.config:2820:warning: symbol value 'm' invalid for MFD_WM8400
*.config:2821:warning: symbol value 'm' invalid for MFD_WM8350_I2C
*.config:2822:warning: symbol value 'm' invalid for MFD_WM8350
*.config:2823:warning: symbol value 'm' invalid for MFD_WM831X
*.config:3460:warning: symbol value 'm' invalid for POWER_SUPPLY
*--
*Allow for memory compaction (COMPACTION) [Y/n/?] y
*  Page migration (MIGRATION) [Y/?] y
*Enable bounce buffers (BOUNCE) [Y/n/?] (NEW)
*Enable KSM for page merging (KSM) [Y/n/?] y
*Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] 4096
*Enable recovery from hardware memory errors (MEMORY_FAILURE) [Y/n/?] y
*--
*  Debug Statements (ACPI_DEBUG) [N/y/?] (NEW)
*  PCI slot detection driver (ACPI_PCI_SLOT) [Y/n/?] y
*  Container and Module Devices (ACPI_CONTAINER) [Y/?] (NEW) y
*  Memory Hotplug (ACPI_HOTPLUG_MEMORY) [Y/n/?] y
*  Smart Battery System (ACPI_SBS) [N/m/y/?] (NEW)
*  Hardware Error Device (ACPI_HED) [Y/?] y
*  Allow ACPI methods to be inserted/replaced at run time (ACPI_CUSTOM_METHOD) [N/m/y/?] (NEW)
*  Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] (NEW)
*  ACPI NVDIMM Firmware Interface Table (NFIT) (ACPI_NFIT) [N/m/y/?] (NEW)
*  ACPI Platform Error Interface (APEI) (ACPI_APEI) [Y/n/?] y
*    APEI Generic Hardware Error Source (ACPI_APEI_GHES) [Y/n/?] y
*    APEI PCIe AER logging/recovering support (ACPI_APEI_PCIEAER) [Y/n/?] y
*    APEI memory error recovering support (ACPI_APEI_MEMORY_FAILURE) [Y/n/?] y
*    APEI Error INJection (EINJ) (ACPI_APEI_EINJ) [M/n/y/?] m
*    APEI Error Record Serialization Table (ERST) Debug Support (ACPI_APEI_ERST_DEBUG) [M/n/y/?] m
*  Extended Error Log support (ACPI_EXTLOG) [N/m/y/?] (NEW)
*--
* Bus options (PCI etc.)
*
*PCI support (PCI) [Y/n/?] y
*  Support mmconfig PCI config space access (PCI_MMCONFIG) [N/y] (NEW)
*  PCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
*    Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
*      PCI Express ECRC settings control (PCIE_ECRC) [Y/n/?] y
*      PCIe AER error injector support (PCIEAER_INJECT) [M/n/y/?] m
*--
*      *
*      round-robin scheduling (IP_VS_RR) [M/n/?] m
*      weighted round-robin scheduling (IP_VS_WRR) [M/n/?] m
*      least-connection scheduling (IP_VS_LC) [M/n/?] m
*      weighted least-connection scheduling (IP_VS_WLC) [M/n/?] m
*      weighted failover scheduling (IP_VS_FO) [N/m/?] (NEW)
*--
*  * Wireless
*  *
*  Wireless (WIRELESS) [Y] y
*    cfg80211 - wireless configuration API (CFG80211) [M/n/?] m
*      nl80211 testmode command (NL80211_TESTMODE) [N/y/?] n
*      enable developer warnings (CFG80211_DEVELOPER_WARNINGS) [N/y/?] n
*--
*SCSI CDROM support (BLK_DEV_SR) [M/n/y/?] m
*  Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
*SCSI generic support (CHR_DEV_SG) [M/n/y/?] m
*SCSI media changer support (CHR_DEV_SCH) [M/n/y/?] m
*SCSI Enclosure Support (SCSI_ENCLOSURE) [M/n/?] m
*Verbose SCSI error reporting (kernel size +=75K) (SCSI_CONSTANTS) [Y/n/?] y
*--
*  Compile All OSD modules with lots of DEBUG prints (SCSI_OSD_DEBUG) [N/y/?] n
*
* Serial ATA and Parallel ATA drivers (libata)
*
*Serial ATA and Parallel ATA drivers (libata) (ATA) [Y/n/m/?] y
*  Verbose ATA error reporting (ATA_VERBOSE_ERROR) [Y/n/?] y
*--
*      IP-over-InfiniBand data path debugging (INFINIBAND_IPOIB_DEBUG_DATA) [N/y/?] n
*  InfiniBand SCSI RDMA Protocol (INFINIBAND_SRP) [M/n/?] m
*  InfiniBand SCSI RDMA Protocol target support (INFINIBAND_SRPT) [N/m/?] (NEW)
*  iSCSI Extensions for RDMA (iSER) (INFINIBAND_ISER) [M/n/?] m
*
* EDAC (Error Detection And Correction) reporting
*
*EDAC (Error Detection And Correction) reporting (EDAC) [Y/n/?] y
*  EDAC legacy sysfs (EDAC_LEGACY_SYSFS) [Y/n/?] y
*  Debugging (EDAC_DEBUG) [N/y/?] n
*  Decode MCEs in human-readable form (only on AMD for now) (EDAC_DECODE_MCE) [M/n/y/?] m
*  Main Memory EDAC (Error Detection And Correction) reporting (EDAC_MM_EDAC) [M/n/y/?] m
*    AMD64 (Opteron, Athlon64) (EDAC_AMD64) [M/n/?] m
*      Sysfs HW Error injection facilities (EDAC_AMD64_ERROR_INJECTION) [Y/n/?] y
*--
*  JFS statistics (JFS_STATISTICS) [N/y/?] n
*XFS filesystem support (XFS_FS) [M/n/y/?] m
*  XFS Quota support (XFS_QUOTA) [Y/n/?] y
*  XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
*  XFS Realtime subvolume support (XFS_RT) [N/y/?] n
*  XFS Verbose Warnings (XFS_WARN) [N/y/?] (NEW)
*--
*Inotify support for userspace (INOTIFY_USER) [Y/n/?] y
*Filesystem wide access notification (FANOTIFY) [Y/n/?] y
*  fanotify permissions checking (FANOTIFY_ACCESS_PERMISSIONS) [N/y/?] (NEW)
*Quota support (QUOTA) [Y/n/?] y
*Report quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [Y/n/?] y
*Print quota warnings to console (OBSOLETE) (PRINT_QUOTA_WARNING) [Y/n/?] y
*--
*torture tests for RCU (RCU_TORTURE_TEST) [N/m/y/?] n
*RCU CPU stall timeout in seconds (RCU_CPU_STALL_TIMEOUT) [21] (NEW)
*Enable tracing for RCU (RCU_TRACE) [N/y/?] n
*Provide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
*Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
*Notifier error injection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] (NEW)
*--
*  LD      arch/x86/kernel/cpu/mcheck/built-in.o
*  CC      arch/x86/kernel/cpu/microcode/core.o
*  CC      kernel/power/suspend.o
*  CC      arch/x86/kernel/cpu/microcode/intel.o
*arch/x86/kernel/cpu/microcode/intel.c: In function ‘save_mc_for_early’:
*arch/x86/kernel/cpu/microcode/intel.c:516:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
* }
* ^
*arch/x86/kernel/cpu/microcode/intel.c: In function ‘get_matching_model_microcode.isra.2.constprop’:
*arch/x86/kernel/cpu/microcode/intel.c:348:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
*--
*  CC      kernel/configs.o
*  LD      kernel/built-in.o
*  CC      mm/vmpressure.o
*  CC      mm/swap_cgroup.o
*  CC      fs/open.o
*  CC      mm/memory-failure.o
*--
*  CC      drivers/regulator/core.o
*  CC      lib/halfmd4.o
*  CC      lib/debug_locks.o
*  CC      lib/random32.o
*drivers/regulator/core.c: In function ‘regulator_lock_supply’:
*drivers/regulator/core.c:142:6: warning: unused variable ‘i’ [-Wunused-variable]
*--
*In file included from /usr/include/stdio.h:936:0,
*                 from Documentation/mic/mpssd/mpssd.h:23,
*                 from Documentation/mic/mpssd/mpssd.c:41:
*In function ‘snprintf’,
*    inlined from ‘set_cmdline’ at Documentation/mic/mpssd/mpssd.c:1541:9:
*/usr/include/bits/stdio2.h:64:3: warning: call to __builtin___snprintf_chk will always overflow destination buffer
*--
*  CC [M]  drivers/dma/ioat/init.o
*  CC [M]  fs/ext4/extents.o
*  CC [M]  drivers/dma/ioat/dma.o
*  CC [M]  drivers/dma/ioat/prep.o
*drivers/dma/ioat/prep.c: In function ‘ioat_prep_pqxor’:
*drivers/dma/ioat/prep.c:682:1: warning: the frame size of 1048 bytes is larger than 1024 bytes [-Wframe-larger-than=]
* }
* ^
*drivers/dma/ioat/prep.c: In function ‘ioat_prep_pqxor_val’:
*drivers/dma/ioat/prep.c:714:1: warning: the frame size of 1048 bytes is larger than 1024 bytes [-Wframe-larger-than=]
*--
*  CC [M]  drivers/gpu/drm/i915/i915_gem_userptr.o
*  CC [M]  fs/jffs2/wbuf.o
*  CC [M]  drivers/gpu/drm/i915/i915_gpu_error.o
*  CC [M]  fs/jffs2/xattr.o
*fs/jffs2/xattr.c: In function ‘jffs2_build_xattr_subsystem’:
*fs/jffs2/xattr.c:887:1: warning: the frame size of 1120 bytes is larger than 1024 bytes [-Wframe-larger-than=]
*--
*  CC [M]  drivers/i2c/i2c-dev.o
*In file included from drivers/gpu/drm/radeon/radeon_mode.h:37:0,
*                 from drivers/gpu/drm/radeon/radeon.h:80,
*                 from drivers/gpu/drm/radeon/r100.c:33:
*drivers/gpu/drm/radeon/r100.c: In function ‘r100_bandwidth_update’:
*include/drm/drm_fixed.h:64:13: warning: ‘crit_point_ff.full’ may be used uninitialized in this function [-Wmaybe-uninitialized]
*  u64 tmp = ((u64)A.full << 13);
*             ^
*drivers/gpu/drm/radeon/r100.c:3153:63: note: ‘crit_point_ff.full’ was declared here
*  fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
*                                                               ^
*drivers/gpu/drm/radeon/r100.c:3583:42: warning: ‘disp_drain_rate.full’ may be used uninitialized in this function [-Wmaybe-uninitialized]
*--
*  CC [M]  drivers/scsi/libfc/fc_lport.o
*  CC [M]  drivers/net/ethernet/neterion/vxge/vxge-ethtool.o
*  CC [M]  drivers/scsi/libfc/fc_rport.o
*  CC [M]  drivers/net/ethernet/neterion/vxge/vxge-main.o
*drivers/net/ethernet/neterion/vxge/vxge-main.c: In function ‘vxge_poll_inta’:
*drivers/net/ethernet/neterion/vxge/vxge-main.c:1873:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]
* }
* ^
*  CC [M]  drivers/scsi/libfc/fc_fcp.o
*drivers/net/ethernet/neterion/vxge/vxge-main.c: In function ‘vxge_tx_msix_handle’:
*drivers/net/ethernet/neterion/vxge/vxge-main.c:2248:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
* }
* ^
*drivers/net/ethernet/neterion/vxge/vxge-main.c: In function ‘vxge_netpoll’:
*drivers/net/ethernet/neterion/vxge/vxge-main.c:1908:1: warning: the frame size of 1048 bytes is larger than 1024 bytes [-Wframe-larger-than=]
*--
*  CC [M]  net/xfrm/xfrm_ipcomp.o
*  CC [M]  net/wireless/ocb.o
*  CC [M]  net/wireless/wext-compat.o
*  CC [M]  net/wireless/wext-sme.o
*{standard input}: Assembler messages:
*{standard input}: Fatal error: can't close net/wireless/.tmp_trace.o: No space left on device
*scripts/Makefile.build:258: recipe for target 'net/wireless/trace.o' failed
*make[2]: *** [net/wireless/trace.o] Error 1
*make[2]: *** Waiting for unfinished jobs....
*scripts/Makefile.build:403: recipe for target 'net/wireless' failed
*make[1]: *** [net/wireless] Error 2
*Makefile:943: recipe for target 'net' failed
*make: *** [net] Error 2
*--
* Running with options: all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
*
* ERROR: Failed to compile the "modules" target...
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*
(chroot) livecd / #

[Moderator edit: added [code] tags to preserve output layout. -Hu]
Back to top
View user's profile Send private message
fedeliallalinea
Bodhisattva
Bodhisattva


Joined: 08 Mar 2003
Posts: 21754
Location: here

PostPosted: Fri Aug 12, 2016 5:40 am    Post subject: Re: error: Reply with quote

liuxk wrote:
Code:
*{standard input}: Assembler messages:
*{standard input}: Fatal error: can't close net/wireless/.tmp_trace.o: No space left on device

Problem is space. Post the output of
Code:
$ df -h

_________________
Questions are guaranteed in life; Answers aren't.
Back to top
View user's profile Send private message
liuxk
n00b
n00b


Joined: 28 Jul 2016
Posts: 13

PostPosted: Fri Aug 12, 2016 7:49 am    Post subject: Reply with quote

ok。have already been solved,thank you。
Back to top
View user's profile Send private message
liuxk
n00b
n00b


Joined: 28 Jul 2016
Posts: 13

PostPosted: Fri Aug 12, 2016 7:56 am    Post subject: Reply with quote

Can you add your contact way
I want to learn technology and English with you.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum