Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
New Gentoo installation and Geforce 7025 graphic.
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
Wachuu
n00b
n00b


Joined: 02 Oct 2016
Posts: 5

PostPosted: Sun Oct 02, 2016 11:01 am    Post subject: New Gentoo installation and Geforce 7025 graphic. Reply with quote

Hi guys! As first sorry for my bad english.

I'm happy Linux user since last 2 years and i decided to try a Gentoo distribution. So i took my old PC with Asrock N68C-S motherboard (which have Integrated NVIDIA® GeForce 7025 graphics) and booted Minimal Gentoo amd64 image.

I builded the whole system with AMD64 Gentoo Handbook. This passed without issues. It was time to build Xorg and XFCE environment, so i added VIDEO_CARDS="nouveau" to make.conf (i thought this geforce 7025 is compatible with nouveau) and a nouveau support to Kernel (according to this https://wiki.gentoo.org/wiki/Nouveau) but after emerging Xorg i tried run startx and it exit with error "No screens found (EE)".


What went wrong? Should i use closed Nvidia drivers instead of Nouveau?


There's my Xorg.log:
Code:

[  2269.504]
X.Org X Server 1.18.4
Release Date: 2016-07-19
[  2269.504] X Protocol Version 11, Revision 0
[  2269.504] Build Operating System: Linux 4.4.21-gentoo x86_64 Gentoo
[  2269.504] Current Operating System: Linux localhost 4.4.21-gentoo #1 SMP Sat Oct 1 17:02:40 CEST 2016 x86_
64
[  2269.504] Kernel command line: BOOT_IMAGE=/boot/kernel-genkernel-x86_64-4.4.21-gentoo root=UUID=03ec91e7-a
dce-4fc6-baff-4725f74b282f ro
[  2269.504] Build Date: 01 October 2016  09:52:58PM
[  2269.504]
[  2269.504] Current version of pixman: 0.34.0
[  2269.504]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[  2269.504] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2269.505] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct  1 22:05:00 2016
[  2269.505] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2269.505] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2269.505] (==) No Layout section.  Using the first Screen section.
[  2269.505] (==) No screen section available. Using defaults.
[  2269.505] (**) |-->Screen "Default Screen Section" (0)
[  2269.505] (**) |   |-->Monitor "<default monitor>"
[  2269.505] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[  2269.505] (==) Automatically adding devices
[  2269.505] (==) Automatically enabling devices
[  2269.505] (==) Automatically adding GPU devices
[  2269.505] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2269.505] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[  2269.505]    Entry deleted from font path.
[  2269.505] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  2269.505]    Entry deleted from font path.
[  2269.505] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  2269.505]    Entry deleted from font path.
[  2269.505] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  2269.505]    Entry deleted from font path.
[  2269.505]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  2269.505] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  2269.505]    Entry deleted from font path.
[  2269.505]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  2269.505] (==) FontPath set to:
        /usr/share/fonts/misc/
[  2269.505] (==) ModulePath set to "/usr/lib64/xorg/modules"
[  2269.505] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2269.505] (II) Loader magic: 0x810d40
[  2269.505] (II) Module ABI versions:
[  2269.505]    X.Org ANSI C Emulation: 0.4
[  2269.505]    X.Org Video Driver: 20.0
[  2269.505]    X.Org XInput driver : 22.1
[  2269.505]    X.Org Server Extension : 9.0
[  2269.505] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /var/run/d
bus/system_bus_socket: No such file or directory)
[  2269.505] (--) using VT number 7

[  2269.505] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  2269.506] (--) PCI:*(0:0:13:0) 10de:03d6:1849:03d6 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf9000000/16777216, BIOS @
0x????????/131072
[  2269.506] (II) LoadModule: "glx"
[  2269.507] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[  2269.508] (II) Module glx: vendor="X.Org Foundation"
[  2269.508]    compiled for 1.18.4, module version = 1.0.0
[  2269.508]    ABI class: X.Org Server Extension, version 9.0
[  2269.508] (==) AIGLX enabled
[  2269.508] (==) Matched nouveau as autoconfigured driver 0
[  2269.508] (==) Matched nv as autoconfigured driver 1
[  2269.508] (==) Matched modesetting as autoconfigured driver 2
[  2269.508] (==) Matched fbdev as autoconfigured driver 3
[  2269.508] (==) Matched vesa as autoconfigured driver 4
[  2269.508] (==) Assigned the driver to the xf86ConfigLayout
[  2269.508] (II) LoadModule: "nouveau"
[  2269.508] (WW) Warning, couldn't open module nouveau
[  2269.508] (II) UnloadModule: "nouveau"
[  2269.508] (II) Unloading nouveau
[  2269.508] (EE) Failed to load module "nouveau" (module does not exist, 0)
[  2269.508] (II) LoadModule: "nv"
[  2269.508] (WW) Warning, couldn't open module nv
[  2269.508] (II) UnloadModule: "nv"
[  2269.509] (II) Unloading nv
[  2269.509] (EE) Failed to load module "nv" (module does not exist, 0)
[  2269.509] (II) LoadModule: "modesetting"
[  2269.509] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[  2269.509] (II) Module modesetting: vendor="X.Org Foundation"
[  2269.509]    compiled for 1.18.4, module version = 1.18.4
[  2269.509]    Module class: X.Org Video Driver
[  2269.509]    ABI class: X.Org Video Driver, version 20.0
[  2269.509] (II) LoadModule: "fbdev"
[  2269.509] (WW) Warning, couldn't open module fbdev
[  2269.509] (II) UnloadModule: "fbdev"
[  2269.509] (II) Unloading fbdev
[  2269.509] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  2269.509] (II) LoadModule: "vesa"
[  2269.509] (WW) Warning, couldn't open module vesa
[  2269.509] (II) UnloadModule: "vesa"
[  2269.509] (II) Unloading vesa
[  2269.509] (EE) Failed to load module "vesa" (module does not exist, 0)
[  2269.509] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  2269.517] (EE) open /dev/dri/card0: No such file or directory
[  2269.517] (WW) Falling back to old probe method for modesetting
[  2269.517] (EE) open /dev/dri/card0: No such file or directory
[  2269.517] (EE) Screen 0 deleted because of no matching config section.
[  2269.517] (II) UnloadModule: "modesetting"
[  2269.517] (EE) Device(s) detected, but none match those in the config file.
[  2269.517] (EE)
Fatal server error:
[  2269.517] (EE) no screens found(EE)
[  2269.517] (EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
[  2269.518] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  2269.518] (EE)
[  2269.521] (EE) Server terminated with error (1). Closing log file.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Sun Oct 02, 2016 11:11 am    Post subject: Reply with quote

Wachuu,

Welcome to Gentoo.

This error usually means that your kernel is not quite right.
Code:
[  2269.517] (EE) open /dev/dri/card0: No such file or directory


Boot your Gentoo.
Code:
emerge wgetpaste
That lets you put things on the web.
Run
Code:
wgetpaste /usr/src/linux/.config
and tell us the URL you get back.

Post the output of lspci
Post the output of
Code:
emerge --info

_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Wachuu
n00b
n00b


Joined: 02 Oct 2016
Posts: 5

PostPosted: Sun Oct 02, 2016 11:26 am    Post subject: Reply with quote

My /usr/src/linux/.config
https://paste.pound-python.org/show/KJqSKVqFz0DISUux7vKi/

lspci
Code:


00:00.0 RAM memory: NVIDIA Corporation MCP61 Host Bridge (rev a1)
00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2)
00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2)
00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2)
00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3)
00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3)
00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1)
00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2)
00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2)
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2)
00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2)
00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control


emerge --info
Code:

Portage 2.3.0 (python 2.7.10-final-0, default/linux/amd64/13.0/systemd, gcc-4.9.3, glibc-2.22-r4, 4.4.21-gentoo x86_64)
=================================================================
System uname: Linux-4.4.21-gentoo-x86_64-AMD_Athlon-tm-_Dual_Core_Processor_4850B-with-gentoo-2.2
KiB Mem:     1796112 total,   1411564 free
KiB Swap:    4518064 total,   4513284 free
Timestamp of repository gentoo: Sat, 01 Oct 2016 11:30:01 +0000
sh bash 4.3_p46-r1
ld GNU ld (Gentoo 2.25.1 p1.1) 2.25.1
app-shells/bash:          4.3_p46-r1::gentoo
dev-lang/perl:            5.22.2::gentoo
dev-lang/python:          2.7.10-r1::gentoo, 3.4.3-r1::gentoo
dev-util/cmake:           3.5.2-r1::gentoo
dev-util/pkgconfig:       0.28-r2::gentoo
sys-apps/baselayout:      2.2::gentoo
sys-apps/openrc:          0.21.7::gentoo
sys-apps/sandbox:         2.10-r1::gentoo
sys-devel/autoconf:       2.69::gentoo
sys-devel/automake:       1.14.1::gentoo, 1.15::gentoo
sys-devel/binutils:       2.25.1-r1::gentoo
sys-devel/gcc:            4.9.3::gentoo
sys-devel/gcc-config:     1.7.3::gentoo
sys-devel/libtool:        2.4.6::gentoo
sys-devel/make:           4.1-r1::gentoo
sys-kernel/linux-headers: 4.3::gentoo (virtual/os-headers)
sys-libs/glibc:           2.22-r4::gentoo
Repositories:

gentoo
    location: /usr/portage
    sync-type: rsync
    sync-uri: rsync://rsync.gentoo.org/gentoo-portage
    priority: -1000

ACCEPT_KEYWORDS="amd64"
ACCEPT_LICENSE="* -@EULA"
CBUILD="x86_64-pc-linux-gnu"
CFLAGS="-march=native -O2 -pipe"
CHOST="x86_64-pc-linux-gnu"
CONFIG_PROTECT="/etc"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-march=native -O2 -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -pipe"
GENTOO_MIRRORS="ftp://ftp.swin.edu.au/gentoo"
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
MAKEOPTS="-j4"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X acl amd64 berkdb bindist bzip2 cli cracklib crypt cxx dbus dri fortran gdbm iconv ipv6 jpeg lock mmx mmxext modules multilib ncurses nls nptl openmp pam pcre readline seccomp session sse sse2 ssl startup-notification systemd tcpd thunar udev unicode xattr zlib" ABI_X86="64 32" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="authn_core authz_core socache_shmcb unixd actions alias auth_basic authn_alias authn_anon authn_dbm authn_default authn_file authz_dbm authz_default authz_groupfile authz_host authz_owner authz_user autoindex cache cgi cgid dav dav_fs dav_lock deflate dir disk_cache env expires ext_filter file_cache filter headers include info log_config logio mem_cache mime mime_magic negotiation rewrite setenvif speling status unique_id userdir usertrack vhost_alias" CALLIGRA_FEATURES="kexi words flow plan sheets stage tables krita karbon braindump author" CAMERAS="ptp2" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6" PYTHON_SINGLE_TARGET="python2_7" PYTHON_TARGETS="python2_7 python3_4" RUBY_TARGETS="ruby20 ruby21" USERLAND="GNU" VIDEO_CARDS="nouveau" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS, USE_PYTHON

Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Sun Oct 02, 2016 11:38 am    Post subject: Reply with quote

Wachuu,

The nouveau page says your card is supported.
Your kernel setup looks generally OK too.

Can you pastebin your dmesg output please.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Wachuu
n00b
n00b


Joined: 02 Oct 2016
Posts: 5

PostPosted: Sun Oct 02, 2016 11:56 am    Post subject: Reply with quote

dmesg
http://pastebin.com/QBczqH4W

I'm confused because dmesg looks fine for me
Back to top
View user's profile Send private message
Buffoon
Veteran
Veteran


Joined: 17 Jun 2015
Posts: 1074
Location: EU or US

PostPosted: Sun Oct 02, 2016 12:41 pm    Post subject: Reply with quote

Below is dmesg from a box running nouveau. Your running kernel was built Oct 1st 17:02. Is this the latest kernel you built?
Code:
[    0.607624] [drm] Initialized drm 1.1.0 20060810
[    0.608077] nouveau 0000:01:00.0: NVIDIA GT218 (0a8600a2)
[    0.628403] ACPI: Battery Slot [BAT0] (battery present)
[    0.649825] nouveau 0000:01:00.0: bios: version 70.18.42.00.05
[    0.651368] nouveau 0000:01:00.0: fb: 256 MiB GDDR3
[    0.706388] [TTM] Zone  kernel: Available graphics memory: 1949984 kiB
[    0.706651] [TTM] Initializing pool allocator
[    0.706910] [TTM] Initializing DMA pool allocator
[    0.707184] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB
[    0.707453] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    0.707717] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    0.707978] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    0.708243] nouveau 0000:01:00.0: DRM: DCB outp 00: 01800323 00010034
[    0.708505] nouveau 0000:01:00.0: DRM: DCB outp 01: 02811300 00000000
[    0.708765] nouveau 0000:01:00.0: DRM: DCB outp 02: 028223a6 0f220010
[    0.709025] nouveau 0000:01:00.0: DRM: DCB outp 03: 02822362 00020010
[    0.709291] nouveau 0000:01:00.0: DRM: DCB outp 04: 048333b6 0f220010
[    0.709554] nouveau 0000:01:00.0: DRM: DCB outp 05: 04833372 00020010
[    0.709813] nouveau 0000:01:00.0: DRM: DCB outp 06: 088443c6 0f220010
[    0.710073] nouveau 0000:01:00.0: DRM: DCB outp 07: 08844382 00020010
[    0.710340] nouveau 0000:01:00.0: DRM: DCB conn 00: 00000040
[    0.710600] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[    0.710858] nouveau 0000:01:00.0: DRM: DCB conn 02: 00101246
[    0.711116] nouveau 0000:01:00.0: DRM: DCB conn 03: 00202346
[    0.711382] nouveau 0000:01:00.0: DRM: DCB conn 04: 00410446
[    0.738172] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.738447] [drm] Driver supports precise vblank timestamp query.
[    0.788040] nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
Back to top
View user's profile Send private message
Wachuu
n00b
n00b


Joined: 02 Oct 2016
Posts: 5

PostPosted: Mon Oct 03, 2016 7:45 am    Post subject: Reply with quote

Ok Guys, so i rebuilded the kernel and dmesg still says that there is no Nouveau.

BUT.. Xorg.log is showing new lines containing "NOUVEAU driver"..
Code:

X.Org X Server 1.18.4
Release Date: 2016-07-19
[    66.564] X Protocol Version 11, Revision 0
[    66.564] Build Operating System: Linux 4.4.21-gentoo x86_64 Gentoo
[    66.564] Current Operating System: Linux localhost 4.4.21-gentoo #1 SMP Sun Oct 2 17:07:25 CEST 2016 x86_64
[    66.564] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.21-gentoo root=UUID=03ec91e7-adce-4fc6-baff-4725f74b282f
ro
[    66.564] Build Date: 01 October 2016  09:52:58PM
[    66.564]
[    66.564] Current version of pixman: 0.34.0
[    66.565]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    66.565] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    66.565] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct  3 11:39:37 2016
[    66.611] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    66.612] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    66.635] (==) No Layout section.  Using the first Screen section.
[    66.635] (==) No screen section available. Using defaults.
[    66.635] (**) |-->Screen "Default Screen Section" (0)
[    66.635] (**) |   |-->Monitor "<default monitor>"
[    66.636] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    66.636] (==) Automatically adding devices
[    66.636] (==) Automatically enabling devices
[    66.636] (==) Automatically adding GPU devices
[    66.636] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    66.653] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[    66.653]    Entry deleted from font path.
[    66.653] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    66.653]    Entry deleted from font path.
[    66.653] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    66.653]    Entry deleted from font path.
[    66.653] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    66.653]    Entry deleted from font path.
[    66.653]    (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    66.654] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    66.654]    Entry deleted from font path.
[    66.654]    (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    66.654] (==) FontPath set to:
        /usr/share/fonts/misc/
[    66.654] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    66.654] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    66.654] (II) Loader magic: 0x810d40
[    66.654] (II) Module ABI versions:
[    66.654]    X.Org ANSI C Emulation: 0.4
[    66.654]    X.Org Video Driver: 20.0
[    66.654]    X.Org XInput driver : 22.1
[    66.654]    X.Org Server Extension : 9.0
[    66.654] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect
to socket /var/run/dbus/system_bus_socket: No such file or directory)
[    66.654] (--) using VT number 7

[    66.654] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind i
ntegration
[    66.655] (--) PCI:*(0:0:13:0) 10de:03d6:1849:03d6 rev 162, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf90000
00/16777216, BIOS @ 0x????????/131072
[    66.665] (II) LoadModule: "glx"
[    66.672] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    66.772] (II) Module glx: vendor="X.Org Foundation"
[    66.772]    compiled for 1.18.4, module version = 1.0.0
[    66.772]    ABI class: X.Org Server Extension, version 9.0
[    66.772] (==) AIGLX enabled
[    66.772] (==) Matched nouveau as autoconfigured driver 0
[    66.772] (==) Matched nv as autoconfigured driver 1
[    66.772] (==) Matched modesetting as autoconfigured driver 2
[    66.772] (==) Matched fbdev as autoconfigured driver 3
[    66.772] (==) Matched vesa as autoconfigured driver 4
[    66.772] (==) Assigned the driver to the xf86ConfigLayout
[    66.772] (II) LoadModule: "nouveau"
[    66.772] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[    66.787] (II) Module nouveau: vendor="X.Org Foundation"
[    66.787]    compiled for 1.18.4, module version = 1.0.12
[    66.787]    Module class: X.Org Video Driver
[    66.788]    ABI class: X.Org Video Driver, version 20.0
[    66.788] (II) LoadModule: "nv"
[    66.788] (WW) Warning, couldn't open module nv
[    66.788] (II) UnloadModule: "nv"
[    66.788] (II) Unloading nv
[    66.788] (EE) Failed to load module "nv" (module does not exist, 0)
[    66.788] (II) LoadModule: "modesetting"
[    66.788] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[    66.796] (II) Module modesetting: vendor="X.Org Foundation"
[    66.796]    compiled for 1.18.4, module version = 1.18.4
[    66.796]    Module class: X.Org Video Driver
[    66.796]    ABI class: X.Org Video Driver, version 20.0
[    66.796] (II) LoadModule: "fbdev"
[    66.796] (WW) Warning, couldn't open module fbdev
[    66.796] (II) UnloadModule: "fbdev"
[    66.796] (II) Unloading fbdev
[    66.796] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    66.796] (II) LoadModule: "vesa"
[    66.796] (WW) Warning, couldn't open module vesa
[    66.796] (II) UnloadModule: "vesa"
[    66.796] (II) Unloading vesa
[    66.796] (EE) Failed to load module "vesa" (module does not exist, 0)
[b][    66.796] (II) NOUVEAU driver
[    66.796] (II) NOUVEAU driver for NVIDIA chipset families :
[    66.796]    RIVA TNT        (NV04)
[    66.796]    RIVA TNT2       (NV05)
[    66.796]    GeForce 256     (NV10)
[    66.796]    GeForce 2       (NV11, NV15)
[    66.796]    GeForce 4MX     (NV17, NV18)
[    66.796]    GeForce 3       (NV20)
[    66.797]    GeForce 4Ti     (NV25, NV28)
[    66.797]    GeForce FX      (NV3x)
[    66.797]    GeForce 6       (NV4x)
[    66.797]    GeForce 7       (G7x)
[    66.797]    GeForce 8       (G8x)
[    66.797]    GeForce GTX 200 (NVA0)
[    66.797]    GeForce GTX 400 (NVC0)
[    66.797] (II) modesetting: Driver for Modesetting Kernel Drivers: kms[/b]
[    66.925] (EE) [drm] Failed to open DRM device for pci:0000:00:0d.0: -19
[    66.925] (EE) open /dev/dri/card0: No such file or directory
[    66.925] (WW) Falling back to old probe method for modesetting
[    66.925] (EE) open /dev/dri/card0: No such file or directory
[    66.925] (EE) Screen 0 deleted because of no matching config section.
[    66.925] (II) UnloadModule: "modesetting"
[    66.925] (EE) Device(s) detected, but none match those in the config file.
[    66.925] (EE)
Fatal server error:
[    66.925] (EE) no screens found(EE)
[    66.925] (EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
[    66.925] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    66.925] (EE)
[    66.929] (EE) Server terminated with error (1). Closing log file.


Anyway its still (EE) open /dev/dri/card0: No such file or directory

new dmesg
http://pastebin.com/6uhA6B1x


I'll try do something more with the kernel after i back from the school.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Mon Oct 03, 2016 9:17 am    Post subject: Reply with quote

Wachuu,

The nouveau kernel module is missing still.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Wachuu
n00b
n00b


Joined: 02 Oct 2016
Posts: 5

PostPosted: Mon Oct 03, 2016 11:08 am    Post subject: Reply with quote

Guys, its working! I think the reason was the

Code:
Direct Rendering Manager (XFree86 4.1.0 and higher DRI Support


I accidentally marked it as module instead of built-in to kernel (M instead of *)

After building new kernel it's worked out of the box! Even the startup messages and login screen runs in a lot higher resolution.


Im such a genius.. Thank you guys for your time and help :)
Back to top
View user's profile Send private message
samiswt
n00b
n00b


Joined: 13 Apr 2013
Posts: 19

PostPosted: Thu Jan 26, 2017 7:07 pm    Post subject: Reply with quote

Code:
(EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect
to socket /var/run/dbus/system_bus_socket: No such file or directory)

How did you solve this problem? Do you use systemd instead of OpenRC? I'm stuck at this one.
There's no X related configuration file in
Code:
/etc/dbus-1
.

How to make Xorg and systemd work together?
Back to top
View user's profile Send private message
ian.au
Guru
Guru


Joined: 07 Apr 2011
Posts: 433
Location: Australia

PostPosted: Thu Jan 26, 2017 9:40 pm    Post subject: Reply with quote

samiswt wrote:
Code:
(EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect
to socket /var/run/dbus/system_bus_socket: No such file or directory)

How did you solve this problem? Do you use systemd instead of OpenRC? I'm stuck at this one.
There's no X related configuration file in
Code:
/etc/dbus-1
.

samiswt
The OP is using
Quote:
Portage 2.3.0 (python 2.7.10-final-0, default/linux/amd64/13.0/systemd, gcc-4.9.3, glibc-2.22-r4, 4.4.21-gentoo x86_64)
we know this because he posted information about his machine.
Quote:
How to make Xorg and systemd work together?

Basically this can be achieved by closely following the handbook. If that isn't working for you, Neddy Seagoons first post above tells you how to supply the information that would be needed to diagnose your problem. Work through his list and post the resulting output.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum