Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] Arduino MKR1000 Not Detected
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
kkrizka
n00b
n00b


Joined: 30 Jul 2007
Posts: 30

PostPosted: Fri Oct 28, 2016 3:40 pm    Post subject: [SOLVED] Arduino MKR1000 Not Detected Reply with quote

Hello,

I am trying to program the Arduino MKR1000 board from my Gentoo installation, but the computer is having trouble detecting it. Plugging it in makes no difference in dmesg and I don't see any /dev/ttyUSB* entries. I have enabled all options in the Gentoo Arduino twiki. Any ideas what I could be missing? Everything works fine from Windows, so I don't think it is the hardware.

lsusb
Code:

Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 148f:5372 Ralink Technology, Corp. RT5372 Wireless Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 28de:1142 
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:081b Logitech, Inc. Webcam C310
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


kernel options
Code:

CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_ACM=m
CONFIG_USB_SERIAL_CH341=m


I would also paste the contents of dmesg, but plugging in the device creates no entries.

--
Karol Krizka


Last edited by kkrizka on Sat Oct 29, 2016 5:13 pm; edited 1 time in total
Back to top
View user's profile Send private message
kkrizka
n00b
n00b


Joined: 30 Jul 2007
Posts: 30

PostPosted: Sat Oct 29, 2016 5:13 pm    Post subject: [SOLVED] Arduino MKR1000 Not Detected Reply with quote

Turns out it was a very silly mistake. The USB port I was using is USB3.0 and I did not have support for it in kernel. Adding the xhci_hcd module made the Arduino work.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum