Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
boot/kernel and/or OpenRC problem?
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Wed Nov 30, 2016 11:56 am    Post subject: boot/kernel and/or OpenRC problem? Reply with quote

Hello,

I have just installed Gentoo (more or less succesfully) on my ASUS eePC. However, when booting the new system I get some OpenRC errors. Unfortunately I can't list them as they just pass quickly will starting up, but they read something like

OpenRC: Unable to execute /some/path (maybe /bin/lib-64/-something)
mkdir (...)
mkdir (...)
unable to create directory/file.

No init scipts are started, neither in runlevel boot nor in default. Commands like eselect are not available. dmesg does not list any errors except for "[intel_enable_lvds] *ERROR* timed out waiting for panel feature to power on". My fstab is configured according to my partition scheme: I have /dev/sda1 as boot (ext2), /dev/sda2 swap and /dev/sda3 is root (ext4).

I can login as root with the password set using my installation live USB. I give my kernel the "rootfstype=ext4" option.

Googleing for similar errors did yield either a wrong entry in fstab as a possible cause or missing features in the kernel config. This is not the case for me, though. I have checked several times. In fact my fstab was configured wrong at first woith /dev/sda3 as swap and /devsda4 as root, but I have changed this meanwhile, recompiled the kernel and reran the grub config. Also I ran etc-update && source /etc/profile. I've also tried downgrading openrc. Upgraded it since the downgrade had no effect on my problem.

I'm using the experimental next-kernel.

I would be most pleased if someone could help. I'm sorry for the little information available. I have listed here everything I'm able to see.


EDIT: SOLUTION:
Code:
# CONFIG_BINFMT_SCRIPT
was not set in my kernel config. You can activate this option in your
Code:
Executable file format
menue in your kernel config. Without this option your system is not able to run scribts starting with a comment. Thus it is needed for the whole init process, as far as I understand.

Many thanks,
Benno


Last edited by Benno_88 on Mon Dec 05, 2016 11:48 am; edited 1 time in total
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Wed Nov 30, 2016 1:03 pm    Post subject: Reply with quote

Benno_88,

Welcome to Gentoo.

To get more information, try the following.
Boot your live media
Mount you gentoo root at /mnt/gentoo.
Now edit the file at /mnt/gentoo/etc/rc.conf
Code:
nano -w /mnt/gentoo/etc/rc.conf

Near the top you will see
Code:
# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
# this feature. This feature is automatically disabled if rc_parallel is
# set to YES.
#rc_interactive="YES"
change the last line to read
Code:
rc_interactive="YES"
so its not a comment any more.
Save the change and reboot your gentoo.
You will see a message Press I to Enter Interactive Boot.
Press the I key as soon as you see that message. OpenRC will now let you control individual services, so you have more time to read messages too.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Thu Dec 01, 2016 10:48 am    Post subject: Reply with quote

Ok, just rebooting now.

Here is my fstab in case this might be of interest, too:
Code:
# /etc/fstab: static file system information.
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed); notail increases performance of ReiserFS (at the expense of storage
# efficiency).  It's safe to drop the noatime options if you want and to
# switch between notail / tail freely.
#
# The root filesystem should have a pass number of either 0 or 1.
# All other filesystems should have a pass number of 0 or greater than 1.
#
# See the manpage fstab(5) for more information.
#

# <fs>                  <mountpoint>    <type>          <opts>          <dump/p$

# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/sda1               /boot           ext2            noauto,noatime  1 2
/dev/sda3               /               ext4            noatime         0 1
/dev/sda2               none            swap            sw              0 0


EDIT: Changing my rc.conf did not change anything regarding the startup of the system... Also my root partition is still mounted as read only.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Thu Dec 01, 2016 12:07 pm    Post subject: Reply with quote

Benno_88,

You need to press the 'I' key as it boots. Boot proceeds normally unless you do that.
There is a message but it will go past as fast as anything else.

Is your root filesystem ext4?
Your fstab entry for root ( / ) is used to run rootfsck at startup. If that fails, root stays read only.

To get root read/write, so you can post more information, log in as your root user.
Then

Code:
/bin/mount -o,remount,rw /
To remount root read/write.
Next save some information and shutdown
Code:
dmesg > /root/dmesg.txt
/sbin/shutdown -h now


Inside your gentoo, at /root/dmesg.txt you have your kernel startup messages.

Boot your install media.
Mount your gentoo root at /mnt/gentoo
Put the file at /mnt/gentoo/root/dmesg.txt onto a pasetbin site and post the URL.
Depending on your install media
Code:
wgetpaste /mnt/gentoo/root/dmesg.txt
may work.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Sat Dec 03, 2016 9:14 am    Post subject: Reply with quote

Hi,

thanks for your help. As I'm currently at work, I could not try much yet. However, no boot menue did pop up for me where I could have pressed "I". So I pressed it randomly during boot before the init scripts would start up. No success.

Yes, my root fs is ext4, as listed in my fstab above.

I will try to get red/write access the way you described it to me asap. The first error, however, is "some file not found". ie an error by OpenRC just before the init scripts should start and rioght after the kernel messages ended. I can say that the path to the file which is not found contains folder bin, lib64 and sh. Possibly init, or similar or this might be the file it can't find.

Will update as soon as I have tried to gain read/write access. Hopefully with some more information.



Many Thanks!
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Sat Dec 03, 2016 10:36 am    Post subject: Reply with quote

Benno_88,

There in no "Press I menu ... . Its a single extra line of text in the wall of text that flashes by that's too fast to read.
Check your /etc/rc.conf in your Gentoo. Maybe you edited the one in your live media instead?
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Sat Dec 03, 2016 1:41 pm    Post subject: Reply with quote

Oh, I see. Sorry for acting so incredibely stupid...

I could now read

Code:
/lib64/rc/init.sh

init.sh line 6: /sh/functions.sh not found
(literally translated from my mother tongue).

First part of my /etc/rc.conf

Code:
  nano 2.6.3                 File: gentoo/etc/rc.conf                           

# Global OpenRC configuration settings

# Set to "YES" if you want the rc system to try and start services
# in parallel for a slight speed improvement. When running in parallel we
# prefix the service output with its name as the output will get
# jumbled up.
# WARNING: whilst we have improved parallel, it can still potentially lock
# the boot process. Don't file bugs about this unless you can supply
# patches that fix it without breaking other things!
#rc_parallel="YES"

# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
# this feature. This feature is automatically disabled if rc_parallel is
# set to YES.
rc_interactive="YES"


I'm sure that's what you meant, no? I did edit the one in /etc/.

I will try to restart right now.

I was just already able to remount my root fs in read-write mode, however I did not collect any infortmation as I didn't have the commands you posted available. I'll be right back and post the output here.
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Sat Dec 03, 2016 2:04 pm    Post subject: Reply with quote

Sorry for the double post, however I wanted to make sure its clear there is an update.

First of all OpenRC does fail with an init.sh error right away. So maybe this interactive mode can not even be activated? Well, I tried to press I, a lot. No effect.

Here is my dmesg output:

Code:
[    0.000000] Linux version 4.9.0-rc6-next-20161125 (root@livecd) (gcc version 4.9.3 (Gentoo 4.9.3 p1.5, pie-0.6.4) ) #12 SMP PREEMPT Thu Dec 1 13:35:00 CET 2016
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-rc6-next-20161125 root=/dev/sda3 ro rootfstype=ext4
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f65ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f660000-0x000000007f66dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f66e000-0x000000007f6affff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f6b0000-0x000000007f6bffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f6c0000-0x000000007f6dffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: ASUSTeK Computer INC. 1215N/1215N, BIOS 0503    09/07/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f660 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 28672
[    0.000000] BRK [0x01de8000, 0x01de8fff] PGTABLE
[    0.000000] BRK [0x01de9000, 0x01de9fff] PGTABLE
[    0.000000] BRK [0x01dea000, 0x01deafff] PGTABLE
[    0.000000] BRK [0x01deb000, 0x01debfff] PGTABLE
[    0.000000] BRK [0x01dec000, 0x01decfff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FBF30 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x000000007F660100 00006C (v01 _ASUS_ Notebook 09001007 MSFT 00000097)
[    0.000000] ACPI: FACP 0x000000007F660290 0000F4 (v04 A_M_I_ OEMFACP  09001007 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x000000007F6604A0 0099D6 (v02 A1609  A1609000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 0x000000007F66E000 000040
[    0.000000] ACPI: FACS 0x000000007F66E000 000040
[    0.000000] ACPI: APIC 0x000000007F660390 00006C (v02 A_M_I_ OEMAPIC  09001007 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x000000007F660400 00003C (v01 A_M_I_ OEMMCFG  09001007 MSFT 00000097)
[    0.000000] ACPI: ECDT 0x000000007F660440 000055 (v01 A_M_I_ OEMECDT  09001007 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x000000007F66E040 000061 (v01 A_M_I_ AMI_OEM  09001007 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007F669E80 000038 (v01 A_M_I_ OEMHPET  09001007 MSFT 00000097)
[    0.000000] ACPI: GSCI 0x000000007F66E0B0 002024 (v01 A_M_I_ GMCHSCI  09001007 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000007F6708A0 0004F0 (v01 PmRef  CpuPm    00003000 INTL 20060113)
[    0.000000] ACPI: SLIC 0x000000007F669EC0 000176 (v01 _ASUS_ Notebook 09001007 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f65ffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f65ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f65ffff]
[    0.000000] On node 0 totalpages: 521726
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8090 pages used for memmap
[    0.000000]   DMA32 zone: 517728 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88007f400000 s91160 r8192 d31720 u524288
[    0.000000] pcpu-alloc: s91160 r8192 d31720 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 513550
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-rc6-next-20161125 root=/dev/sda3 ro rootfstype=ext4
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2036140K/2086904K available (8400K kernel code, 485K rwdata, 1920K rodata, 856K init, 560K bss, 50764K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:4352 nr_irqs:456 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: PIT calibration matches HPET. 1 loops
[    0.000000] tsc: Detected 1799.989 MHz processor
[    0.002020] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.97 BogoMIPS (lpj=1799989)
[    0.002228] pid_max: default: 32768 minimum: 301
[    0.002340] ACPI: Core revision 20160930
[    0.016056] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.016291] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016402] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016878] CPU: Physical Processor ID: 0
[    0.016983] CPU: Processor Core ID: 0
[    0.017010] mce: CPU supports 5 MCE banks
[    0.017113] CPU0: Thermal monitoring enabled (TM1)
[    0.017214] process: using mwait in idle threads
[    0.017318] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.017419] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.018137] Freeing SMP alternatives memory: 36K
[    0.019146] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.019255] smpboot: Max logical packages: 2
[    0.019775] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.030000] smpboot: CPU0: Intel(R) Atom(TM) CPU D525   @ 1.80GHz (family: 0x6, model: 0x1c, stepping: 0xa)
[    0.032009] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[    0.032272] ... version:                3
[    0.032368] ... bit width:              40
[    0.032465] ... generic registers:      2
[    0.032561] ... value mask:             000000ffffffffff
[    0.032660] ... max period:             000000007fffffff
[    0.032760] ... fixed-purpose events:   3
[    0.032855] ... event mask:             0000000700000003
[    0.040008] smp: Bringing up secondary CPUs ...
[    0.047022] x86: Booting SMP configuration:
[    0.047123] .... node  #0, CPUs:      #1
[    0.003000] Disabled fast string operations
[    0.115019]  #2
[    0.003000] Disabled fast string operations
[    0.003000]  #3
[    0.003000] Disabled fast string operations
[    0.244082] smp: Brought up 1 node, 4 CPUs
[    0.244313] smpboot: Total of 4 processors activated (14471.26 BogoMIPS)
[    0.245478] devtmpfs: initialized
[    0.246336] PM: Registering ACPI NVS region [mem 0x7f66e000-0x7f6affff] (270336 bytes)
[    0.246458] PM: Registering ACPI NVS region [mem 0x7f6c0000-0x7f6dffff] (131072 bytes)
[    0.246717] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.247117] NET: Registered protocol family 16
[    0.247631] cpuidle: using governor ladder
[    0.247760] ACPI: bus type PCI registered
[    0.247864] PCI: Using configuration type 1 for base access
[    0.248319] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.248424] mtrr: probably your BIOS does not setup all CPUs.
[    0.248525] mtrr: corrected configuration.
[    0.253730] ACPI: Added _OSI(Module Device)
[    0.253834] ACPI: Added _OSI(Processor Device)
[    0.253933] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.254010] ACPI: Added _OSI(Processor Aggregator Device)
[    0.254116] ACPI : EC: EC started
[    0.255500] ACPI: \: Used as first EC
[    0.255599] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.255702] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.256076] ACPI: Executed 1 blocks of module-level executable AML code
[    0.271116] ACPI: Dynamic OEM Table Load:
[    0.271299] ACPI: SSDT 0xFFFF88007CA70000 000724 (v01 PmRef  Cpu0Cst  00003001 INTL 20060113)
[    0.272469] ACPI: Dynamic OEM Table Load:
[    0.272642] ACPI: SSDT 0xFFFF88007CA37780 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20060113)
[    0.273531] ACPI : EC: EC stopped
[    0.273628] ACPI : EC: EC started
[    0.273960] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.274008] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.274118] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[    0.274227] ACPI: Interpreter enabled
[    0.274363] ACPI: (supports S0 S3 S4 S5)
[    0.274461] ACPI: Using IOAPIC for interrupt routing
[    0.274634] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.285583] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.288557] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.288675] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments]
[    0.288789] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.289131] PCI host bridge to bus 0000:00
[    0.289233] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.289340] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.289447] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.289557] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.289665] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xfed8ffff window]
[    0.289775] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.289891] pci 0000:00:00.0: [8086:a000] type 00 class 0x060000
[    0.290086] pci 0000:00:02.0: [8086:a001] type 00 class 0x030000
[    0.290099] pci 0000:00:02.0: reg 0x10: [mem 0xf5e00000-0xf5e7ffff]
[    0.290106] pci 0000:00:02.0: reg 0x14: [io  0xcc00-0xcc07]
[    0.290113] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff pref]
[    0.290120] pci 0000:00:02.0: reg 0x1c: [mem 0xf5d00000-0xf5dfffff]
[    0.290337] pci 0000:00:02.1: [8086:a002] type 00 class 0x038000
[    0.290348] pci 0000:00:02.1: reg 0x10: [mem 0xf5e80000-0xf5efffff]
[    0.290559] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.290579] pci 0000:00:1b.0: reg 0x10: [mem 0xf5cf8000-0xf5cfbfff 64bit]
[    0.290657] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.290816] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.290898] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.290986] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.291098] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.291178] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.291265] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.291459] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.291539] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.291624] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.291820] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.291865] pci 0000:00:1d.0: reg 0x20: [io  0xc400-0xc41f]
[    0.292155] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.292199] pci 0000:00:1d.1: reg 0x20: [io  0xc480-0xc49f]
[    0.292377] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.292422] pci 0000:00:1d.2: reg 0x20: [io  0xc800-0xc81f]
[    0.292599] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.292644] pci 0000:00:1d.3: reg 0x20: [io  0xc880-0xc89f]
[    0.292829] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.292851] pci 0000:00:1d.7: reg 0x10: [mem 0xf5cf7c00-0xf5cf7fff]
[    0.292943] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.293126] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.293266] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.293461] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[    0.293728] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.293748] pci 0000:00:1f.2: reg 0x10: [io  0xc080-0xc087]
[    0.293758] pci 0000:00:1f.2: reg 0x14: [io  0xc000-0xc003]
[    0.293768] pci 0000:00:1f.2: reg 0x18: [io  0xbc00-0xbc07]
[    0.293778] pci 0000:00:1f.2: reg 0x1c: [io  0xb880-0xb883]
[    0.293787] pci 0000:00:1f.2: reg 0x20: [io  0xb800-0xb81f]
[    0.293798] pci 0000:00:1f.2: reg 0x24: [mem 0xf5cf7800-0xf5cf7bff]
[    0.293847] pci 0000:00:1f.2: PME# supported from D3hot
[    0.294027] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.294085] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.294378] pci 0000:04:00.0: [10de:0a76] type 00 class 0x030000
[    0.294422] pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.294475] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.294527] pci 0000:04:00.0: reg 0x1c: [mem 0xce000000-0xcfffffff 64bit pref]
[    0.294557] pci 0000:04:00.0: reg 0x24: [io  0xec00-0xec7f]
[    0.294588] pci 0000:04:00.0: reg 0x30: [mem 0xfbf00000-0xfbf7ffff pref]
[    0.295046] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.295153] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.295159] pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.295167] pci 0000:00:1c.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.295296] pci 0000:02:00.0: [14e4:4727] type 00 class 0x028000
[    0.295324] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffc000-0xf9ffffff 64bit]
[    0.295460] pci 0000:02:00.0: supports D1 D2
[    0.295463] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.298064] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.298174] pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf9ffffff]
[    0.298182] pci 0000:00:1c.1:   bridge window [mem 0xc8000000-0xcdffffff 64bit pref]
[    0.298277] pci 0000:01:00.0: [1969:2062] type 00 class 0x020000
[    0.298305] pci 0000:01:00.0: reg 0x10: [mem 0xf5fc0000-0xf5ffffff 64bit]
[    0.298319] pci 0000:01:00.0: reg 0x18: [io  0xdc00-0xdc7f]
[    0.298437] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.301025] pci 0000:00:1c.2: PCI bridge to [bus 01]
[    0.301133] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.301139] pci 0000:00:1c.2:   bridge window [mem 0xf5f00000-0xf5ffffff]
[    0.301259] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.301376] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.301380] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.301383] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.301387] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.301390] pci 0000:00:1e.0:   bridge window [mem 0x7f700000-0xfed8ffff window] (subtractive decode)
[    0.301416] pci_bus 0000:00: on NUMA node 0
[    0.302910] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.303590] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.304236] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.305052] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.305702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.306479] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.307147] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[    0.307800] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.308535] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.308884] ACPI : EC: event unblocked
[    0.308992] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.309008] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.309402] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.309511] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.309689] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    0.309803] pci 0000:04:00.0: vgaarb: bridge control possible
[    0.310009] pci 0000:00:02.0: vgaarb: no bridge control possible
[    0.310115] vgaarb: loaded
[    0.311105] SCSI subsystem initialized
[    0.311311] libata version 3.00 loaded.
[    0.311315] ACPI: bus type USB registered
[    0.311467] usbcore: registered new interface driver usbfs
[    0.311592] usbcore: registered new interface driver hub
[    0.311745] usbcore: registered new device driver usb
[    0.311880] Linux video capture interface: v2.00
[    0.312064] Advanced Linux Sound Architecture Driver Initialized.
[    0.312185] PCI: Using ACPI for IRQ routing
[    0.312285] PCI: pci_cache_line_size set to 64 bytes
[    0.312394] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.312397] e820: reserve RAM buffer [mem 0x7f660000-0x7fffffff]
[    0.312702] clocksource: Switched to clocksource hpet
[    0.312702] pnp: PnP ACPI init
[    0.312702] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.312702] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.312753] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.312893] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.313014] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.313129] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[    0.313537] system 00:04: [io  0x025c-0x025f] has been reserved
[    0.313646] system 00:04: [io  0x0380-0x0383] has been reserved
[    0.313751] system 00:04: [io  0x0400-0x041f] has been reserved
[    0.313855] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.313963] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.314069] system 00:04: [io  0x0480-0x04bf] has been reserved
[    0.314175] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.314298] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.314406] system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.314512] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.314619] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[    0.314730] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.314990] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.315102] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.315212] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.315380] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.315493] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.316004] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.316115] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.316223] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.316353] system 00:07: [mem 0x00100000-0x7f6fffff] could not be reserved
[    0.316461] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.316573] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.316965] pnp: PnP ACPI: found 8 devices
[    0.326054] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.326272] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
[    0.326287] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.326306] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.326311] pci 0000:00:1c.2: res[9]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.326315] pci 0000:00:1c.1: res[7]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.326319] pci 0000:00:1c.1: res[7]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.326335] pci 0000:00:1c.2: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.326449] pci 0000:00:1c.1: BAR 7: assigned [io  0x1000-0x1fff]
[    0.326558] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.326660] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.326769] pci 0000:00:1c.0:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.326878] pci 0000:00:1c.0:   bridge window [mem 0xce000000-0xdfffffff 64bit pref]
[    0.326992] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[    0.327096] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.327203] pci 0000:00:1c.1:   bridge window [mem 0xf6000000-0xf9ffffff]
[    0.327325] pci 0000:00:1c.1:   bridge window [mem 0xc8000000-0xcdffffff 64bit pref]
[    0.327440] pci 0000:00:1c.2: PCI bridge to [bus 01]
[    0.327542] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    0.327650] pci 0000:00:1c.2:   bridge window [mem 0xf5f00000-0xf5ffffff]
[    0.327758] pci 0000:00:1c.2:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.327873] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.327985] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.327989] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.327992] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.327995] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.327999] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff window]
[    0.328003] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.328006] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.328009] pci_bus 0000:04: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
[    0.328013] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.328016] pci_bus 0000:02: resource 1 [mem 0xf6000000-0xf9ffffff]
[    0.328019] pci_bus 0000:02: resource 2 [mem 0xc8000000-0xcdffffff 64bit pref]
[    0.328023] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.328026] pci_bus 0000:01: resource 1 [mem 0xf5f00000-0xf5ffffff]
[    0.328029] pci_bus 0000:01: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.328033] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.328037] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.328040] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.328043] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.328047] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff window]
[    0.328213] NET: Registered protocol family 2
[    0.328631] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.328830] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.329064] TCP: Hash tables configured (established 16384 bind 16384)
[    0.329311] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.329447] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.329667] NET: Registered protocol family 1
[    0.329801] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.331122] pci 0000:01:00.0: [Firmware Bug]: VPD access disabled
[    0.331252] PCI: CLS 32 bytes, default 64
[    0.332394] Scanning for low memory corruption every 60 seconds
[    0.333057] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.333625] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[    0.339749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.339867] io scheduler noop registered
[    0.340092] io scheduler cfq registered (default)
[    0.341243] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
[    0.341802] ACPI: AC Adapter [AC0] (on-line)
[    0.346685] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.351601] ACPI: Lid Switch [LID]
[    0.351803] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.351920] ACPI: Sleep Button [SLPB]
[    0.352108] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    0.352313] ACPI: Power Button [PWRB]
[    0.352523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.352636] ACPI: Power Button [PWRF]
[    0.353484] Monitor-Mwait will be used to enter C-1 state
[    0.369283] thermal LNXTHERM:00: registered as thermal_zone0
[    0.369393] ACPI: Thermal Zone [TZ00] (73 C)
[    0.369637] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.370512] Linux agpgart interface v0.103
[    0.370739] [drm] Initialized
[    0.371203] pci 0000:00:00.0: Intel GMA3150 Chipset
[    0.371355] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    0.371557] pci 0000:00:00.0: detected 8192K stolen memory
[    0.371719] [drm] Memory usable by graphics device = 512M
[    0.372489] [drm] Replacing VGA console driver
[    0.373534] Console: switching to colour dummy device 80x25
[    0.379278] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.379289] [drm] Driver supports precise vblank timestamp query.
[    0.381931] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    0.423052] [drm] RC6 disabled, disabling runtime PM support
[    0.423079] [drm] initialized overlay support
[    0.423537] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[    0.423591] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    0.423846] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:25/LNXVIDEO:00/input/input4
[    0.460315] ACPI: Battery Slot [BAT0] (battery present)
[    0.460486] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    0.477135] acpi device:2b: registered as cooling_device4
[    0.477319] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input5
[    0.477385] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[    0.478242] ahci 0000:00:1f.2: version 3.0
[    0.478493] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    0.478510] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    0.479656] scsi host0: ahci
[    0.479897] scsi host1: ahci
[    0.480120] scsi host2: ahci
[    0.480348] scsi host3: ahci
[    0.480475] ata1: SATA max UDMA/133 abar m1024@0xf5cf7800 port 0xf5cf7900 irq 21
[    0.480486] ata2: DUMMY
[    0.480493] ata3: DUMMY
[    0.480500] ata4: DUMMY
[    0.500835] fbcon: inteldrmfb (fb0) is primary device
[    0.506621] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[    0.506752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.506753] ehci-pci: EHCI PCI platform driver
[    0.506964] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.507061] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.507079] ehci-pci 0000:00:1d.7: debug port 1
[    0.511009] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.511038] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf5cf7c00
[    0.517262] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.517375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.517378] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.517381] usb usb1: Product: EHCI Host Controller
[    0.517384] usb usb1: Manufacturer: Linux 4.9.0-rc6-next-20161125 ehci_hcd
[    0.517386] usb usb1: SerialNumber: 0000:00:1d.7
[    0.517681] hub 1-0:1.0: USB hub found
[    0.517698] hub 1-0:1.0: 8 ports detected
[    0.518654] uhci_hcd: USB Universal Host Controller Interface driver
[    0.518812] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.518919] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.518955] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[    0.519069] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.519072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.519075] usb usb2: Product: UHCI Host Controller
[    0.519078] usb usb2: Manufacturer: Linux 4.9.0-rc6-next-20161125 uhci_hcd
[    0.519080] usb usb2: SerialNumber: 0000:00:1d.0
[    0.519376] hub 2-0:1.0: USB hub found
[    0.519392] hub 2-0:1.0: 2 ports detected
[    0.519847] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.519950] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.519999] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c480
[    0.520115] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.520119] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.520122] usb usb3: Product: UHCI Host Controller
[    0.520124] usb usb3: Manufacturer: Linux 4.9.0-rc6-next-20161125 uhci_hcd
[    0.520127] usb usb3: SerialNumber: 0000:00:1d.1
[    0.520434] hub 3-0:1.0: USB hub found
[    0.520451] hub 3-0:1.0: 2 ports detected
[    0.520865] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.520965] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.521017] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c800
[    0.521129] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.521132] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.521135] usb usb4: Product: UHCI Host Controller
[    0.521138] usb usb4: Manufacturer: Linux 4.9.0-rc6-next-20161125 uhci_hcd
[    0.521140] usb usb4: SerialNumber: 0000:00:1d.2
[    0.521437] hub 4-0:1.0: USB hub found
[    0.521453] hub 4-0:1.0: 2 ports detected
[    0.521873] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.521969] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.522004] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c880
[    0.522126] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.522129] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.522132] usb usb5: Product: UHCI Host Controller
[    0.522134] usb usb5: Manufacturer: Linux 4.9.0-rc6-next-20161125 uhci_hcd
[    0.522137] usb usb5: SerialNumber: 0000:00:1d.3
[    0.522436] hub 5-0:1.0: USB hub found
[    0.522452] hub 5-0:1.0: 2 ports detected
[    0.522828] usbcore: registered new interface driver usb-storage
[    0.522906] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.542284] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.542380] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.542589] mousedev: PS/2 mouse device common for all mice
[    0.544356] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\SMRG) (20160930/utaddress-247)
[    0.544365] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041F conflicts with OpRegion 0x0000000000000400-0x000000000000040F (\_SB.PCI0.SBRG.SMRG) (20160930/utaddress-247)
[    0.544367] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.544410] uvcvideo: Unable to create debugfs directory
[    0.544454] usbcore: registered new interface driver uvcvideo
[    0.544455] USB Video Class driver (1.1.1)
[    0.544490] hidraw: raw HID events driver (C) Jiri Kosina
[    0.545979] NET: Registered protocol family 10
[    0.546606] Segment Routing with IPv6
[    0.546638] NET: Registered protocol family 17
[    0.546651] Key type dns_resolver registered
[    0.548239] ALSA device list:
[    0.548240]   No soundcards found.
[    0.554623] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    0.554627] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.554631] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    0.554633] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    0.554635] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    0.554639] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    0.554642] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    0.554738] random: fast init done
[    0.562981] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    0.563134] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    0.564309] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[    0.786255] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.787964] ata1.00: unexpected _GTF length (8)
[    0.788336] ata1.00: ATA-8: ST9250315AS, 0003SDM1, max UDMA/133
[    0.788339] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.790443] ata1.00: unexpected _GTF length (8)
[    0.790778] ata1.00: configured for UDMA/133
[    1.085221] usb 1-3: new high-speed USB device number 3 using ehci-pci
[    1.209213] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    1.219313] usb 1-3: New USB device found, idVendor=0781, idProduct=5571
[    1.219316] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.219319] usb 1-3: Product: Cruzer Fit
[    1.219321] usb 1-3: Manufacturer: SanDisk
[    1.219324] usb 1-3: SerialNumber: 4C530011430107123492
[    1.219747] usb-storage 1-3:1.0: USB Mass Storage device detected
[    1.221706] scsi host4: usb-storage 1-3:1.0
[    1.325204] usb 1-6: new high-speed USB device number 4 using ehci-pci
[    1.381491] tsc: Refined TSC clocksource calibration: 1799.988 MHz
[    1.381501] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f21e26ba5, max_idle_ns: 440795219359 ns
[    1.381528] clocksource: Switched to clocksource tsc
[    1.382249] usb 2-1: New USB device found, idVendor=046d, idProduct=c534
[    1.382252] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.382255] usb 2-1: Product: USB Receiver
[    1.382258] usb 2-1: Manufacturer: Logitech
[    1.664684] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4728]
[    1.778839] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0400/0x0, board id: 0, fw id: 650187
[    1.779170] [drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on
[    1.850847] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[    1.855408] Console: switching to colour frame buffer device 170x48
[    2.176980] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.177317] scsi 0:0:0:0: Direct-Access     ATA      ST9250315AS      SDM1 PQ: 0 ANSI: 5
[    2.184131] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.188153] sd 0:0:0:0: [sda] Write Protect is off
[    2.191480] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.191533] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.203858]  sda: sda1 sda2 sda3
[    2.208013] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.315592] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.319199] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[    2.360810] scsi 4:0:0:0: Direct-Access     SanDisk  Cruzer Fit       1.00 PQ: 0 ANSI: 6
[    2.365187] sd 4:0:0:0: [sdb] 15630336 512-byte logical blocks: (8.00 GB/7.45 GiB)
[    2.368405] usb 1-6: New USB device found, idVendor=13d3, idProduct=5702
[    2.368409] usb 1-6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    2.368412] usb 1-6: Product: USB2.0 UVC VGA WebCam
[    2.368415] usb 1-6: Manufacturer: Azurewave
[    2.368417] usb 1-6: SerialNumber: 200901010001
[    2.372427] devtmpfs: mounted
[    2.391610] uvcvideo: Found UVC 1.00 device USB2.0 UVC VGA WebCam (13d3:5702)
[    2.395804] sd 4:0:0:0: [sdb] Write Protect is off
[    2.399389] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[    2.400424] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.410040]  sdb: sdb1
[    2.413609] input: USB2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input11
[    2.420417] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[    2.426760] Freeing unused kernel memory: 856K
[    2.430506] Write protecting the kernel read-only data: 12288k
[    2.435874] Freeing unused kernel memory: 1816K
[    2.441136] Freeing unused kernel memory: 128K
[    3.139731] random: crng init done
[   36.355493] EXT4-fs (sda3): re-mounted. Opts: (null)
[   52.382426] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.


sdb1 is an USB-Stuck with a lubuntu installed.


EDIT:
Why does it say "no soundcard" found? - I am sure I have the right driver selected. Also my synaptics touchpad res is x [..5888], y [..4728]. Should I adjust the values given as screen resolution in the kernel accordingly?


Last edited by Benno_88 on Sun Dec 04, 2016 12:07 pm; edited 2 times in total
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Sat Dec 03, 2016 3:09 pm    Post subject: Reply with quote

Benno_88,

This line is not doing anything
Code:
#rc_parallel="YES"
The # neans that the line is a comment.
You must remove the #.

The dmesg output does not fit in a post. That's why I wanted you to use wgetpaste or some other method to put it onto a pastebin site.
Looking at your dmesg fragment.
Edit. You are a special case most of dmesg is missing.

Code:
 [    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-rc6-next-20161125 root=/dev/sda3 ro rootfstype=ext4

vmlinuz-4.9.0-rc6-next-20161125 is experimental. That may be its own source of problems.

Google says that
Code:
[    0.787964] ata1.00: unexpected _GTF length (8)
indicates a buggy BIOS and can be ignored.

This is good.
Code:
[    2.177317] scsi 0:0:0:0: Direct-Access     ATA      ST9250315AS      SDM1 PQ: 0 ANSI: 5
[    2.184131] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.188153] sd 0:0:0:0: [sda] Write Protect is off
[    2.191480] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.191533] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.203858]  sda: sda1 sda2 sda3
[    2.208013] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.315592] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.319199] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.


Then there is you remounting root read write.
Code:
[   36.355493] EXT4-fs (sda3): re-mounted. Opts: (null)


Your
Code:
/lib64/rc/init.sh

init.sh line 6: /sh/functions.sh not found
is incorrect for a number of reasons.

Code:
$ equery b init.sh
 * Searching for init.sh ...
sys-apps/openrc-0.17 (/lib64/rc/sh/init.sh)
I suspect that is a copy typing error.

Line 6 in that script actually reads
Code:
. "$RC_LIBEXECDIR"/sh/functions.sh

For it to produce /sh/functions.sh implies that the environment variable "$RC_LIBEXECDIR" was not set.

Please pastebin your kernel .config file. Its at the top level of your kernel source tree.
Also post the output of
Code:
$ ls -R /etc/runlevels/*
from inside your Gentoo.
You will need to get back into your chroot for that.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Sat Dec 03, 2016 4:07 pm    Post subject: Reply with quote

Ah, I thought I only need

Code:
rc_interactive="YES"


for this interactive mode, since parallel startup was not mentioned before. Will activare parallel now, too.

Regarding the dmesg: i did comare the file
Code:
dmesg > file.txt
created. You can see the complete output above.

Yes, I know I'm using the experimental kernel, as mentioned in my first posting.

My BIOS is ill functioning or bugy? What should I do?

Code:
init.sh line 6: /sh/functions.sh not found
only pops up if I try to start it manually. OpenRC only opens saying there is a problem with my
Code:
/lib64/rc/init.sh
.

My kernel .config (hope it is complete)

Code:
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 4.9.0-rc6 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEBUG_RODATA=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_BUILD_BIN2C is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_NMI_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
# CONFIG_MEMCG is not set
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_INITRAMFS_COMPRESSION=".gz"
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_POSIX_TIMERS=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
# CONFIG_USERFAULTFD is not set
CONFIG_PCI_QUIRKS=y
CONFIG_MEMBARRIER=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_DATA_VERIFICATION is not set
# CONFIG_PROFILING is not set
CONFIG_KEXEC_CORE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_UPROBES is not set
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
# CONFIG_HAVE_ARCH_HASH is not set
# CONFIG_ISA_BUS_API is not set
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
# CONFIG_CPU_NO_EFFICIENT_FFS is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set

#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_FAST_FEATURE_TESTS=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
# CONFIG_INTEL_RDT_A is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_MATOM=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=64
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
CONFIG_ZPOOL=y
# CONFIG_ZBUD is not set
# CONFIG_Z3FOLD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_FRAME_VECTOR=y
CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y
CONFIG_ARCH_HAS_PKEYS=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_MPX is not set
CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_NATIVE is not set
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
# CONFIG_X86_SYSFB is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_FOU is not set
# CONFIG_IPV6_FOU_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NET_PTP_CLASSIFY is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_SOCK_CGROUP_DATA is not set
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_STREAM_PARSER is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_DST_CACHE is not set
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set

#
# Bus devices
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
# CONFIG_BLK_DEV is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set

#
# Intel MIC Bus Driver
#
# CONFIG_INTEL_MIC_BUS is not set

#
# SCIF Bus Driver
#
# CONFIG_SCIF_BUS is not set

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
# CONFIG_CXL_AFU_DRIVER_OPS is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_MQ_DEFAULT is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_ATL1C=y
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_FSL is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_THERMAL_EMULATION is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=y
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
# CONFIG_MEDIA_CEC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
# CONFIG_TTPCI_EEPROM is not set

#
# Media drivers
#
CONFIG_MEDIA_USB_SUPPORT=y

#
# Webcam devices
#
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_VIDEO_USBTV is not set

#
# Webcam, TV (analog/digital) USB devices
#
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#
# CONFIG_CYPRESS_FIRMWARE is not set

#
# Media ancillary drivers (tuners, sensors, i2c, spi, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Audio/Video compression chips
#

#
# Miscellaneous helper chips
#

#
# Sensors used on soc_camera driver
#

#
# Tools to develop new frontends
#

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_MIPI_DSI=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
CONFIG_DRM_I915_CAPTURE_ERROR=y
CONFIG_DRM_I915_COMPRESS_ERROR=y
CONFIG_DRM_I915_USERPTR=y
# CONFIG_DRM_I915_GVT is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_LEGACY is not set

#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=y
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_HDMI is not set
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=y
CONFIG_SND_HDA_I915=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
# CONFIG_USB_HID is not set
# CONFIG_HID_PID is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_PCI=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_UCSI is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
CONFIG_ASUS_LAPTOP=y
# CONFIG_DELL_SMO8800 is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_CHROME_PLATFORMS is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#

#
# Broadcom SoC drivers
#
# CONFIG_SUNXI_SRAM is not set
# CONFIG_SOC_TI is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# CONFIG_RAS is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_NVMEM is not set
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set

#
# FPGA Configuration Support
#
# CONFIG_FPGA is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
# CONFIG_EFI_DEV_PATH_PARSER is not set

#
# Tegra firmware driver
#

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_ENCRYPTION is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_MANDATORY_FILE_LOCKING is not set
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
# CONFIG_NTFS_FS is not set
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 7089
Location: Saint Amant, Acadiana

PostPosted: Sat Dec 03, 2016 4:10 pm    Post subject: Reply with quote

You have told twice in this thread to use wgetpaste, why don't you?
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Sat Dec 03, 2016 4:10 pm    Post subject: Reply with quote

Ok, my kernel .config was to big. Here the 2nd part

Code:
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4

#
# Compile-time checks and compiler options
#
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_STACK_VALIDATION is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set

#
# Debug Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SCHED_INFO is not set
# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_STACKTRACE is not set
CONFIG_DEBUG_BUGVERBOSE=y

#
# RCU Debugging
#
# CONFIG_PROVE_RCU is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set

#
# Runtime Testing
#
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_MEMTEST is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_X86_PTDUMP_CORE is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_WX is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DOUBLEFAULT=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_KEYWRAP is not set

#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_POLY1305_X86_64 is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
# CONFIG_CRYPTO_SHA1_MB is not set
# CONFIG_CRYPTO_SHA256_MB is not set
# CONFIG_CRYPTO_SHA512_MB is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_CRC64_ECMA is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_SG_SPLIT is not set
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y
CONFIG_SBITMAP=y



However, my dmesg is definitely complete...

EDIT: Just finding out what wgetpaste does and how to use if you prefere it.
Back to top
View user's profile Send private message
Tony0945
Advocate
Advocate


Joined: 25 Jul 2006
Posts: 3076
Location: Illinois, USA

PostPosted: Sat Dec 03, 2016 4:22 pm    Post subject: Reply with quote

Jaglover wrote:
You have told twice in this thread to use wgetpaste, why don't you?


YES!!!!
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Sat Dec 03, 2016 4:45 pm    Post subject: Reply with quote

Benno_88.

Here is a demonstration.
$ wgetpaste /usr/src/linux/.config
Your paste can be seen here: https://paste.pound-python.org/show/UvDDO0N5Cxpt2JYhMjzm/
Helpers can search the URL, download it for further processing and so on. Its about helping us to help you.
Please view the link.

I was wrong about rc_parallel. It must be
Code:
rc_parallel="NO"


You must enable
Code:
# CONFIG_BINFMT_SCRIPT is not set
in your kernel.
In menuconfig that's
Code:
Kernel support for scripts starting with #!

Without that, the kernel will not execute shell scripts and the init system is all shell scripts.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Sat Dec 03, 2016 7:42 pm    Post subject: Reply with quote

Thanks for the introduction to wgetpaste. Seems simple to use. If this is commonly used here I will use it in the future whenever there are text files topost.

The
Code:
# CONFIG_BINFMT_SCRIPT is not set
seems to be the answere! I must have missed this setting after all. Even though I was sure my kernel is correctly configured (checked multiple times), I still had some doubts.
I can't test right now, but it just sounds so much like this is the problem. In case it isn't I'll come back for more advice :) .

Although the other comments (not by NeddySeagoon) did slightly upset me as they seemed quite rude without any obvious reason to it. Especially the second one just containing "YES"... wtf? I thought why not post things here as other people do instead of installing learning a new tool without obvious reason. Doesn't that make sense from my point of view? ...
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 7089
Location: Saint Amant, Acadiana

PostPosted: Sat Dec 03, 2016 7:46 pm    Post subject: Reply with quote

Look, this thread here is to support YOU. Yet you ignored Neddy's suggestion to use wgetpaste, he even gave you an example. How comes I, a bystander, noticed it, and you, the one asking for help, did not?

The rule is simple, short text is posted here in code tags, long ones go to pastebin and parts of it will be quoted here as needed. This way the forum thread will be useful for people who come later searching for solutions.
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Sat Dec 03, 2016 8:39 pm    Post subject: Reply with quote

Ok, I understand and I did learn now to use wgetpaste, also from my postings. However, I also saw wgetpaste as an example to post my texts and I thought posting the output like I did might just be fine, too. I will use wgetpaste next time, no problem.
I just don't see why people get so annoyed and rude (at least this is how it came across) because I just posted this. This is because I could not understand these reaction. The description by NeddySeagoon on the other hand did at least let me understand how to use this tool. Also I did only see an advantage of the wgetpaste methode when I was told that the complete output can not so easily understood and overseen if posted the way I did. I highly appreciate all information helping me. But what I don't like is the way of saying "you must use this, u where told to wtf"... I hope you can understand that this confuses me as a noob and makes me feel not in particulary welcome since these posters did neither help me in any way nor did they explain anything about this wgetpaste or why I should use it.

I thought: ok, you are asked to post this texts and so I did. I did not have in mind that the way might be particulary important.

Furthermore I am very thankful for NeddySeagoons replys since he helped me a great deal. I was only referring to these other two posters, especially the one who only postet "yes" in capital letters which in forums is often understood as screaming on someone. I just think this was not necessary, wouldn't you agree?
Back to top
View user's profile Send private message
Tony0945
Advocate
Advocate


Joined: 25 Jul 2006
Posts: 3076
Location: Illinois, USA

PostPosted: Sat Dec 03, 2016 9:51 pm    Post subject: Reply with quote

Sorry you were offended. I was offended to have to swipe my mouse page after page after page to get to the end of the comment. It's like leaving a five minute call on an answering machine.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Sat Dec 03, 2016 10:27 pm    Post subject: Reply with quote

Benno_88,

Forums posts can be at most 64k. Many things won't fit in that. Often helpers ask for a whole dmesg or a whole kernel .config (or both) becase they don't know exactly what to expect.
They may only need a few lines.

This thread will always be on the forums. Its being grown to help you but google knows about it, so it may well help others that find it.
Its better for all to have relevant parts of big files quoted than have other readers have to read/skim mostly irrelevant things.

wgetpaste has other tricks too. It can post command output. Read
Code:
man wgetpaste

When/if you use Internet Relay Chat (IRC) you must use a pastebin for three lines or more. You will be removed from most channels automatically if you fail to remember that.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Sun Dec 04, 2016 12:01 pm    Post subject: Reply with quote

Hi NeddySeagoon,

thanks for the additional explenation. I do now know the basics of wgetpaste and I have installed it, so ready to use. I will also look at the man page.

I hope this thread will help other people, too. As I mentioned in the beginning I have seen threads where users had similar issues these where solved by other kernel settings. However, this one for executing scripts was not mentioned.
I'm now very reliefed and happy since my gentoo system is finally running. Would you suggest me to delete these long dmesg and kernek config for readability.

@Tony0945
Actually I don't really want to say anything in this regard, but I simply think there are ways people whould talk with each other and ways they don't especially if you are trying to teach someone (eg other users me) how something (gentoo?) works you usually don't do it by listing commands and getting angry if your student doesn't do it 1:1 for whatever reason.

If someone would have said (like NeddySeagoon actually did at some point): Hey, your posts makes this thread unreadable. Fot this you are supposed to use wgetpaste (here and in future). Please eddit your posts. We would have been all well. No need to get upset.

But your sarcasm already tells me that you don't want to understand me and thus probably won't. Thkis is why I didn't want to say anything at all and why I thing these words are useless.

I am German. Here in Hamburg waiters and waitresses behave most of the time (nit always, not everywhere) actually relly rude: the bring you your food and drinks, but you might have to wait really long like an hour or more. They often make mistakes and don't apologiese, they just take back the false order and you wait again (hopefully for the right one). No compensation either. And if there is anything elese not right? - Exactly, no compensation. Servcie here is in middle class places _horrible_. But if you issue a complaint they just stare (in a quite scary way) at you and tell you less friendly they are doing just their job, there are other customers too and in the end they insist on a tip (in Germany you don't tip much and only if you are satisfied with the service). So you can see the tone makes the music.
And maybe this environment of mine is a good reason for me being so sesnitive about unnecessary comments. Also I'm way more sensitive than other people in this regard. Don't get me wrong: I appreciate anyone who is willing to help me and others here and I am very happy about that, even and especially if they tell me where I am wrong. Nevertheless some comments just leave the impression within me like some users want to trigger an argument. But such arguments don't make any community strong.
Ok, so much. From now on I'm going to ignore people who want to raise through such single line posts containing no information. I am not here to argue with anyone or to make anyone mad.


Many thanks NeddySeagoon for all the time and energy you invested. I really love my new system already. Much stuff to play around with.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Sun Dec 04, 2016 1:31 pm    Post subject: Reply with quote

Benno_88,

You haven't done anything wrong. Not using wgetpaste makes it harder for your helpers. You did post your .config file - all of it.
Most users that put the .config in a post don't notice that it's truncated.
The are many ways to to the same thing in Gentoo and they are are equally correct. Its just some are more optimal that others.

There is no need to edit your posts. The posts and the discussion serve a useful purpose to others.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7071

PostPosted: Sun Dec 04, 2016 2:23 pm    Post subject: Reply with quote

I disagree NeddySeagoon

People don't have time to repeat the same thing over and over, when reminding someone about something is generally just enough.
At every try they make to remind you and focus on wgetpaste, you didn't answer them for clarification or help about wgetpaste.

And it is only because NeddySeagoon have a patience even Dalai lama cannot beat, but also, after you've been asked 4 times to use wgetpaste and your rant against that, that he has took time to a deeper explain on how to use it.

Sorry Benno_88: first your thread was horrible to read because of the full pasting (people are not you, they also use phone device to read and answer posting, try to imagine how they see your thread with it), people were trying to help you getting it better in order to get more help from others, instead of listening to them, you rant against them for nothing ; worsening even more the thread content.
You really did a bad job here, and your last comment is showing you have still not even start to reconsider your position and keep assuming they were going against you.

Even your rant against waitress looks wrong: if you wait long time to get the food, it's because waitress are bad ; if the waitress is slow, you will always get your food cold, when you get your food hot and you have wait an hour, then it's not because of the waitress...
I can only imagine how you speak with them when you take a table with that in mind ; and why waitress are looking rude with someone that is rude with them.
Back to top
View user's profile Send private message
Tony0945
Advocate
Advocate


Joined: 25 Jul 2006
Posts: 3076
Location: Illinois, USA

PostPosted: Sun Dec 04, 2016 4:39 pm    Post subject: Reply with quote

Entschuldigung! I geh jetzt, nie zu wiederkommen.
Back to top
View user's profile Send private message
Benno_88
n00b
n00b


Joined: 30 Nov 2016
Posts: 11

PostPosted: Mon Dec 05, 2016 11:43 am    Post subject: Reply with quote

To mee NeddySeagoon mentioning wgetpaste seemed like a suggestion of posting my files from my (more or less broken) gentoo online. Since it was not clear to me from the beginning that this would change anything about readability I did assume I could post it just right away which seemed the simplest solution to me. I did really not mean to offend anyone and I had no idea this way of posting might be a bad way.

EDIT: I didn't mean to rent against anyone, especially this waitress thing is just an example. I had no idea wgetpaste would make a difference for you. If someone would have mentioned this directly I would have learnt about it and used it. Instead someone replied: You have been told to... Why don't you?? (no literal quote). Another answer to this posting was just "YES!!!!". Again: I did really not mean to offend anyone. I thought the point was simply to post the content of my files here so people (including me) can be helped. So I could not understand why people would be mad at me. I hope you can understand my point. Also I'm deeply sorry if anyone feels offended. I just wanted to tell people to talk to each other in a nice way. And again this waitress text was simply an example. I thought it might be a good one since everyone has experienced an unfriendly waitress.

NeddySeagoon:

Ok, thanks. However, I guess most people here prefere another methode of posting. I'll just edit the initial post so people who have a similar problem don't have to go through all of this. EDIT: Also I wanted to thank you for the nice words in the end. I was actually quite unsured due to some of the reactions here.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43178
Location: 56N 3W

PostPosted: Mon Dec 05, 2016 4:23 pm    Post subject: Reply with quote

Benno_88,

Welcome to the Gentoo community.

The Gentoo community is a microcosm of the real world. You meet all sorts of people in the real world, so you will here too.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum