Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Cannot use pf patch since gentoo-sources-4.8.11
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
reppk
n00b
n00b


Joined: 17 Mar 2016
Posts: 24

PostPosted: Thu Dec 08, 2016 5:29 pm    Post subject: Cannot use pf patch since gentoo-sources-4.8.11 Reply with quote

Hi, everyone!

I used to build my kernel (gentoo-sources) with pf & UKSM patches. However, I got error messages since 4.8.11. I found that this problem is caused by pf patch, and the message look like this:
Code:
# genkernel all
* Gentoo Linux Genkernel; Version 65
* Running with options: all

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* Linux Kernel 4.8.12-gentoo-r1 for x86_64...
* .. with config file /usr/share/genkernel/arch/x86_64/kernel-config
* kernel: Using config from /usr/share/genkernel/arch/x86_64/kernel-config
* kernel: >> Running mrproper...
*         >> Running oldconfig...
* kernel: >> Cleaning...
* kernel: >> Invoking menuconfig...
*         >> Compiling 4.8.12-gentoo-r1 bzImage...
*         >> Not installing firmware as it's included in the kernel already (CONFIG_FIRMWARE_IN_KERNEL=y)...
*         >> Compiling 4.8.12-gentoo-r1 modules...
* ERROR: Failed to compile the "modules" target...
*
* -- Grepping log... --
*
*  SHIPPED scripts/kconfig/zconf.lex.c
*  SHIPPED scripts/kconfig/zconf.hash.c
*  HOSTCC  scripts/kconfig/zconf.tab.o
*  HOSTLD  scripts/kconfig/conf
*scripts/kconfig/conf  --oldconfig Kconfig
*.config:307:warning: symbol value 'm' invalid for MICROCODE
*.config:407:warning: symbol value 'm' invalid for ACPI_CONTAINER
*.config:419:warning: symbol value 'm' invalid for CPU_FREQ_STAT
*.config:941:warning: symbol value 'm' invalid for RXKAD
*.config:2863:warning: symbol value 'm' invalid for RTC_LIB
*.config:2864:warning: symbol value 'm' invalid for RTC_CLASS
*--
*Allow for memory compaction (COMPACTION) [Y/n/?] (NEW)
*  Page migration (MIGRATION) [Y/?] (NEW) y
*Enable bounce buffers (BOUNCE) [Y/n/?] y
*Enable KSM for page merging (KSM) [N/y/?] n
*Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] 4096
*Enable recovery from hardware memory errors (MEMORY_FAILURE) [N/y/?] n
*--
*  Allow upgrading ACPI tables via initrd (ACPI_TABLE_UPGRADE) [Y/n/?] (NEW)
*  Debug Statements (ACPI_DEBUG) [N/y/?] n
*  PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
*  Container and Module Devices (ACPI_CONTAINER) [Y/?] (NEW) y
*  Smart Battery System (ACPI_SBS) [N/m/y/?] n
*  Hardware Error Device (ACPI_HED) [N/m/y/?] n
*  Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] (NEW)
*  ACPI NVDIMM Firmware Interface Table (NFIT) (ACPI_NFIT) [N/m/y/?] (NEW)
*  ACPI Platform Error Interface (APEI) (ACPI_APEI) [N/y/?] n
*  DPTF Platform Power Participant (DPTF_POWER) [N/m/y/?] (NEW)
*  Extended Error Log support (ACPI_EXTLOG) [N/m/y/?] (NEW)
*--
* Bus options (PCI etc.)
*
*PCI support (PCI) [Y/n/?] y
*  Support mmconfig PCI config space access (PCI_MMCONFIG) [Y/n] y
*  PCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
*    Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
*      PCI Express ECRC settings control (PCIE_ECRC) [N/y/?] n
*      PCIe AER error injector support (PCIEAER_INJECT) [N/m/y/?] n
*--
*Allow for memory compaction (COMPACTION) [Y/n/?] y
*  Page migration (MIGRATION) [Y/?] (NEW) y
*Enable bounce buffers (BOUNCE) [Y/n/?] y
*Enable KSM for page merging (KSM) [N/y/?] n
*Low address space to protect from user allocation (DEFAULT_MMAP_MIN_ADDR) [4096] 4096
*Enable recovery from hardware memory errors (MEMORY_FAILURE) [N/y/?] n
*--
*  Allow upgrading ACPI tables via initrd (ACPI_TABLE_UPGRADE) [Y/n/?] y
*  Debug Statements (ACPI_DEBUG) [N/y/?] n
*  PCI slot detection driver (ACPI_PCI_SLOT) [N/y/?] n
*  Container and Module Devices (ACPI_CONTAINER) [Y/?] (NEW) y
*  Smart Battery System (ACPI_SBS) [N/m/y/?] n
*  Hardware Error Device (ACPI_HED) [N/m/y/?] n
*  Boottime Graphics Resource Table support (ACPI_BGRT) [N/y/?] n
*  ACPI NVDIMM Firmware Interface Table (NFIT) (ACPI_NFIT) [N/m/y/?] n
*  ACPI Platform Error Interface (APEI) (ACPI_APEI) [N/y/?] n
*  DPTF Platform Power Participant (DPTF_POWER) [N/m/y/?] n
*  Extended Error Log support (ACPI_EXTLOG) [N/m/y/?] n
*--
* Bus options (PCI etc.)
*
*PCI support (PCI) [Y/n/?] y
*  Support mmconfig PCI config space access (PCI_MMCONFIG) [Y/n] y
*  PCI Express Port Bus support (PCIEPORTBUS) [Y/n/?] y
*    Root Port Advanced Error Reporting support (PCIEAER) [Y/n/?] y
*      PCI Express ECRC settings control (PCIE_ECRC) [N/y/?] n
*      PCIe AER error injector support (PCIEAER_INJECT) [N/m/y/?] n
*--
*  * Wireless
*  *
*  Wireless (WIRELESS) [Y] y
*    cfg80211 - wireless configuration API (CFG80211) [M/n/?] m
*      nl80211 testmode command (NL80211_TESTMODE) [N/y/?] n
*      enable developer warnings (CFG80211_DEVELOPER_WARNINGS) [N/y/?] n
*--
*SCSI OnStream SC-x0 tape support (CHR_DEV_OSST) [M/n/y/?] m
*SCSI CDROM support (BLK_DEV_SR) [Y/n/m/?] y
*  Enable vendor-specific extensions (for SCSI CDROM) (BLK_DEV_SR_VENDOR) [Y/n/?] y
*SCSI generic support (CHR_DEV_SG) [M/n/y/?] m
*SCSI media changer support (CHR_DEV_SCH) [M/n/y/?] m
*Verbose SCSI error reporting (kernel size += 36K) (SCSI_CONSTANTS) [N/y/?] n
*--
*OSD-Initiator library (SCSI_OSD_INITIATOR) [N/m/y/?] n
*
* Serial ATA and Parallel ATA drivers (libata)
*
*Serial ATA and Parallel ATA drivers (libata) (ATA) [M/n/y/?] m
*  Verbose ATA error reporting (ATA_VERBOSE_ERROR) [Y/n/?] y
*--
*      Enable full debugging output in iwlegacy (iwl 3945/4965) drivers (IWLEGACY_DEBUG) [N/y/?] (NEW)
*      Intel Wireless WiFi Next Gen AGN - Wireless-N/Advanced-N/Ultimate-N (iwlwifi)  (IWLWIFI) [M/n/?] m
*        Intel Wireless WiFi DVM Firmware support (IWLDVM) [N/m/?] (NEW)
*        Intel Wireless WiFi MVM Firmware support (IWLMVM) [N/m/?] (NEW)
*        *
*        * WARNING: iwlwifi is useless without IWLDVM or IWLMVM
*--
*      IP-over-InfiniBand data path debugging (INFINIBAND_IPOIB_DEBUG_DATA) [N/y/?] (NEW)
*  InfiniBand SCSI RDMA Protocol (INFINIBAND_SRP) [M/n/?] m
*  iSCSI Extensions for RDMA (iSER) (INFINIBAND_ISER) [M/n/?] m
*  RDMA verbs transport library (INFINIBAND_RDMAVT) [N/m/?] (NEW)
*
* EDAC (Error Detection And Correction) reporting
*
*EDAC (Error Detection And Correction) reporting (EDAC) [N/y/?] n
*--
*  JFS statistics (JFS_STATISTICS) [N/y/?] n
*XFS filesystem support (XFS_FS) [Y/n/m/?] y
*  XFS Quota support (XFS_QUOTA) [Y/n/?] y
*  XFS POSIX ACL support (XFS_POSIX_ACL) [Y/n/?] y
*  XFS Realtime subvolume support (XFS_RT) [Y/n/?] y
*  XFS Verbose Warnings (XFS_WARN) [N/y/?] (NEW)
*--
*Dnotify support (DNOTIFY) [Y/n/?] y
*Inotify support for userspace (INOTIFY_USER) [Y/n/?] y
*Filesystem wide access notification (FANOTIFY) [N/y/?] (NEW)
*Quota support (QUOTA) [Y/?] y
*Report quota messages through netlink interface (QUOTA_NETLINK_INTERFACE) [N/y/?] n
*Print quota warnings to console (OBSOLETE) (PRINT_QUOTA_WARNING) [Y/n/?] y
*--
*Enable tracing for RCU (RCU_TRACE) [N/y/?] n
*Provide debugging asserts for adding NO_HZ support to an arch (RCU_EQS_DEBUG) [N/y/?] (NEW)
*Force round-robin CPU selection for unbound work items (DEBUG_WQ_FORCE_RR_CPU) [N/y/?] (NEW)
*Force extended block device numbers and spread them (DEBUG_BLOCK_EXT_DEVT) [N/y/?] n
*Enable CPU hotplug state control (CPU_HOTPLUG_STATE_CONTROL) [N/y/?] (NEW)
*Notifier error injection (NOTIFIER_ERROR_INJECTION) [N/m/y/?] (NEW)
*--
*             ^
*drivers/net/phy/phy.c:619:13: 附註:「phy_trigger_machine」 的上一個定義在此
* static void phy_trigger_machine(struct phy_device *phydev)
*             ^
*drivers/net/phy/phy.c:619:13: 警告:「phy_trigger_machine」 定義後未使用 [-Wunused-function]
*scripts/Makefile.build:289: recipe for target 'drivers/net/phy/phy.o' failed
*make[3]: *** [drivers/net/phy/phy.o] Error 1
*scripts/Makefile.build:440: recipe for target 'drivers/net/phy' failed
*make[2]: *** [drivers/net/phy] Error 2
*--
*  CC [M]  drivers/scsi/qla4xxx/ql4_bsg.o
*  CC [M]  drivers/scsi/qla4xxx/ql4_83xx.o
*  CC [M]  drivers/scsi/qla2xxx/qla_tmpl.o
*  LD [M]  drivers/scsi/lpfc/lpfc.o
*  LD [M]  drivers/scsi/qla4xxx/qla4xxx.o
*scripts/Makefile.build:440: recipe for target 'drivers/net' failed
*make[1]: *** [drivers/net] Error 2
*make[1]: *** Waiting for unfinished jobs....
*  LD [M]  drivers/scsi/qla2xxx/qla2xxx.o
*Makefile:970: recipe for target 'drivers' failed
*make: *** [drivers] Error 2
*--
* Running with options: all
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
*
* ERROR: Failed to compile the "modules" target...
*
* -- End log... --


Could anyone teach me how to deal with this problem?


Last edited by reppk on Sat Jan 07, 2017 1:28 pm; edited 2 times in total
Back to top
View user's profile Send private message
reppk
n00b
n00b


Joined: 17 Mar 2016
Posts: 24

PostPosted: Fri Dec 16, 2016 12:50 pm    Post subject: Reply with quote

This problem is sloved in gentoo-source-4.9.0.
I guess it was caused by "Gentoo Linux" settings in the kernel. They put the settings at the top of the conf file since 4.8.11 in 4.8 series.
Back to top
View user's profile Send private message
reppk
n00b
n00b


Joined: 17 Mar 2016
Posts: 24

PostPosted: Sat Jan 07, 2017 1:28 pm    Post subject: Reply with quote

The same problem shows up again in 4.9.1.... Orz
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum