Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Sort of workaround] xhci_pci crashes after some time
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
joanandk
Tux's lil' helper
Tux's lil' helper


Joined: 12 Feb 2017
Posts: 80

PostPosted: Mon Apr 10, 2017 2:15 pm    Post subject: [Sort of workaround] xhci_pci crashes after some time Reply with quote

Hi,

I have a HP DL380 Gen9 Server which is connected to a 1-Wire sensor network via USB:
Server -> USB-HUB (EX-SYS 1178) -> USB to I2C adapter -> DS2482-800 (I2C to 1-Wire adapter)

Except the Server, this setup was working for over 5 years with Dell 2950 without issues. I have upgraded the server from Dell to HP about 50days from today. The difference between Dell and HP: USB 2.0 (ehci) and USB 3.0 (xhci).

The USB connection stopped working the first time after 45days. The second time today after 5day. The message always starts like this:
Code:

[496204.762154] usb 2-11: USB disconnect, device number 3
[496204.762157] usb 2-11.1: USB disconnect, device number 5

The device behind 2-11.1 is the USB to I2C adapter. The odd part: even if I change ports on the USB-HUB, the server does no longer recognize the change and it will no longer communicate with the 1-Wire network.

Today I have tried to "grab" USB from the server by using it with Virtualbox and
Code:

[507716.384069] ------------[ cut here ]------------
[507716.384077] WARNING: CPU: 15 PID: 4054 at kernel/module.c:1108 module_put+0x90/0xa0
[507716.384079] Modules linked in: ddbridge(O) cxd2099(O) lnbp21(O) stv090x(O) stv6110x(O) mxl5xx(O) stv6111(O) drxk(O) stv0910(O) lnbh25(O) cxd2843(O) stv0367dd(O) tda18212dd(O) dvb_core(O) fuse nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc i2c_dev xt_nat xt_tcpudp xt_conntrack iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables x_tables af_packet bridge stp ipv6 crc_ccitt llc tun i2c_devantech_iss(O) hid_generic usbhid
[507716.384117] i2c-devantech-iss 2-11.1:1.0: disconnected
[507716.384118]  ipmi_ssif sr_mod cdrom sb_edac ahci libahci libata edac_core tg3 ipmi_si x86_pkg_temp_thermal xhci_pci ptp intel_powerclamp xhci_hcd uhci_hcd pps_core hpwdt libphy usbcore lpc_ich ioatdma hpilo i2c_i801 coretemp i2c_smbus mfd_core i2c_core dca evdev usb_common ipmi_devintf ipmi_msghandler vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O)
[507716.384152] CPU: 15 PID: 4054 Comm: owserver Tainted: G           O    4.9.16-gentoo #1
[507716.384154] Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 07/18/2016
[507716.384156]  ffffc900081f7d78 ffffffff81296148 0000000000000000 0000000000000000
[507716.384160]  ffffc900081f7db8 ffffffff810580fc 000004545219b6b0 ffff880850bde730
[507716.384163]  ffff880850bde730 ffff880855b44db0 ffff880852ab63c0 ffff88085ba10c20
[507716.384167] Call Trace:
[507716.384174]  [<ffffffff81296148>] dump_stack+0x4d/0x65
[507716.384179]  [<ffffffff810580fc>] __warn+0xcc/0xf0
[507716.384182]  [<ffffffff810581d8>] warn_slowpath_null+0x18/0x20
[507716.384184]  [<ffffffff810c9070>] module_put+0x90/0xa0
[507716.384187]  [<ffffffff81187b1b>] cdev_put+0x1b/0x20
[507716.384191]  [<ffffffff81185140>] __fput+0x1a0/0x1e0
[507716.384195]  [<ffffffff811851b9>] ____fput+0x9/0x10
[507716.384198]  [<ffffffff81073909>] task_work_run+0x79/0xa0
[507716.384202]  [<ffffffff8105b3d1>] do_exit+0x351/0xb30
[507716.384207]  [<ffffffff8104aab1>] ? __do_page_fault+0x231/0x490
[507716.384210]  [<ffffffff8105ca10>] do_group_exit+0x40/0xa0
[507716.384214]  [<ffffffff8105ca7f>] SyS_exit_group+0xf/0x10
[507716.384220]  [<ffffffff815cb2e4>] entry_SYSCALL_64_fastpath+0x17/0x98
[507716.384222] ---[ end trace 65aacef67ede7a85 ]---


After stopping the virtual machine, I can access the 1-Wire network (as the whole USB subsystem has been reset).

I am using Kernel 4.9.16-gentoo; system is hardended/amd64 profile.

Long story, short question:
- Is this issue a software or hardware problem?
- What can I do to have a stable USB connection?

Thank for a helping hand.

[Moderator edit: changed [quote] tags to [code] tags to preserve output layout. -Hu]


Last edited by joanandk on Thu Feb 21, 2019 7:30 pm; edited 1 time in total
Back to top
View user's profile Send private message
joanandk
Tux's lil' helper
Tux's lil' helper


Joined: 12 Feb 2017
Posts: 80

PostPosted: Thu Feb 21, 2019 7:29 pm    Post subject: Reply with quote

I have in the meantime changed the system. The new system utilises dedicated (PcEngines Wrap 1c) embeddedPC and its native I2C port to a new DS2482-800 chip.

It seems the device got defective (I will be doing some forensics to find which module broke).

Thanks and BR
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum