View previous topic :: View next topic |
Author |
Message |
Rocky007 n00b

Joined: 22 Dec 2014 Posts: 66
|
Posted: Tue Aug 08, 2017 11:38 am Post subject: AORUS Gaming 5 Wake On Lan |
|
|
Hello,
i've set up a gentoo server with an AORUS Gaming 5 mainboard (https://www.gigabyte.com/Motherboard/GA-Z270X-Gaming-5-rev-10#kf).
Now i want to power the server on via WOL is this possible with the KILLER Ethernet port?
ethtool tells the following:
Killer ETH:
Code: |
Settings for enp7s0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Current message level: 0x000060e4 (24804)
link ifup rx_err tx_err hw wol
Link detected: yes
|
Normal Intel ETH:
Code: |
Settings for enp6s0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: Unknown!
Duplex: Unknown! (255)
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off (auto)
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
|
|
|
Back to top |
|
 |
R0b0t1 Apprentice

Joined: 05 Jun 2008 Posts: 255
|
Posted: Tue Aug 08, 2017 7:07 pm Post subject: |
|
|
The difference between the ports should only matter if you install their proprietary Windows software that talks to the Ethernet firmware. Have you tried to use WOL? |
|
Back to top |
|
 |
|