Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] QLogic QMH2562
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
mrhe
n00b
n00b


Joined: 07 Aug 2012
Posts: 33
Location: Kraków

PostPosted: Wed Mar 07, 2018 1:13 pm    Post subject: [SOLVED] QLogic QMH2562 Reply with quote

Hi,
I cant run QMH2562, kernel Linux 4.14.23, system is new and fresh.This is my first system with this card.
Machine BL460c G7 wihout support.
Do you have any suggestions?

dmesg
Code:

[    0.679960] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.01-k.
[    0.680268] qla2xxx [0000:09:00.0]-001a: : MSI-X vector count: 32.
[    0.680380] qla2xxx [0000:09:00.0]-001d: : Found an ISP2532 irq 24 iobase 0xffffb48cc3159000.
[    0.681149] qla2xxx [0000:09:00.0]-00c6:0: MSI-X: Failed to enable support with 32 vectors, using 26 vectors.
[    0.732103] qla2xxx 0000:09:00.0: Direct firmware load for ql2500_fw.bin failed with error -2
[    0.732275] qla2xxx [0000:09:00.0]-0063:0: Failed to load firmware image (ql2500_fw.bin).
[    0.732444] qla2xxx [0000:09:00.0]-0090:0: Firmware image unavailable.
[    0.732554] qla2xxx [0000:09:00.0]-0091:0: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/.
[    1.375012] tsc: Refined TSC clocksource calibration: 2933.436 MHz
[    1.375886] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a48a50322c, max_idle_ns: 440795287943 ns
[    1.443086] qla2xxx [0000:09:00.0]-706d:0: Unable to read SFP data (2/a0/0).
[    1.539408] scsi host0: qla2xxx
[    2.076716] qla2xxx [0000:09:00.0]-500a:0: LOOP UP detected (8 Gbps).
[    2.076992] qla2xxx [0000:09:00.0]-706d:0: Unable to read SFP data (2/a0/0).
[    2.271099] qla2xxx [0000:09:00.0]-00fb:0: QLogic QMH2562 - PCI-Express Dual Channel 8Gb Fibre Channel Mezzanine HBA.
[    2.271278] qla2xxx [0000:09:00.0]-00fc:0: ISP2532: PCIe (5.0GT/s x8) @ 0000:09:00.0 hdma+ host#=0 fw=5.03.15 (80).
[    2.271571] qla2xxx [0000:09:00.1]-001a: : MSI-X vector count: 32.
[    2.271682] qla2xxx [0000:09:00.1]-001d: : Found an ISP2532 irq 51 iobase 0xffffb48cc3169000.
[    2.272433] qla2xxx [0000:09:00.1]-00c6:1: MSI-X: Failed to enable support with 32 vectors, using 26 vectors.
[    2.323106] qla2xxx 0000:09:00.1: Direct firmware load for ql2500_fw.bin failed with error -2
[    2.323273] qla2xxx [0000:09:00.1]-0063:1: Failed to load firmware image (ql2500_fw.bin).
[    2.323436] qla2xxx [0000:09:00.1]-0090:1: Firmware image unavailable.
[    2.323544] qla2xxx [0000:09:00.1]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/.
[    2.383461] clocksource: Switched to clocksource tsc
[    3.032082] qla2xxx [0000:09:00.1]-706d:1: Unable to read SFP data (2/a0/0).
[    3.128233] scsi host1: qla2xxx
[    3.700042] qla2xxx [0000:09:00.1]-500a:1: LOOP UP detected (8 Gbps).
[    3.700292] qla2xxx [0000:09:00.1]-706d:1: Unable to read SFP data (2/a0/0).
[    3.908096] qla2xxx [0000:09:00.1]-00fb:1: QLogic QMH2562 - PCI-Express Dual Channel 8Gb Fibre Channel Mezzanine HBA.
[    3.908277] qla2xxx [0000:09:00.1]-00fc:1: ISP2532: PCIe (5.0GT/s x8) @ 0000:09:00.1 hdma+ host#=1 fw=5.03.15 (80).
[    3.908499] HP HPSA Driver (v 3.4.20-0)




Code:
[ebuild   R    ] sys-kernel/linux-firmware-20180103-r1


Code:
# ls -la /lib64/firmware/ql2500_fw.bin
-rw-r--r-- 1 root root 275128 Mar  2 10:16 /lib64/firmware/ql2500_fw.bin


Last edited by mrhe on Thu Mar 08, 2018 7:58 am; edited 1 time in total
Back to top
View user's profile Send private message
mrhe
n00b
n00b


Joined: 07 Aug 2012
Posts: 33
Location: Kraków

PostPosted: Wed Mar 07, 2018 7:11 pm    Post subject: Reply with quote

Problem solved by recompiling kernel with qla2xxx as module.
Now i can mount data

Code:


[    4.554241] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.01-k.
[    4.554428] qla2xxx [0000:09:00.0]-001a: : MSI-X vector count: 32.
[    4.554431] qla2xxx [0000:09:00.0]-001d: : Found an ISP2532 irq 90 iobase 0xffff8c0283139000.
[    4.554996] qla2xxx [0000:09:00.0]-00c6:5: MSI-X: Failed to enable support with 32 vectors, using 26 vectors.
[    4.564239] be2net 0000:02:00.0 neteth0: renamed from eth2
[    4.572208] be2net 0000:02:00.1 neteth1: renamed from eth3
[    4.714121] qla2xxx [0000:09:00.0]-706d:5: Unable to read SFP data (2/a0/0).
[    4.810415] scsi host5: qla2xxx
[    5.228422] EXT4-fs (sda1): re-mounted. Opts: (null)
[    5.399001] qla2xxx [0000:09:00.0]-500a:5: LOOP UP detected (8 Gbps).
[    5.945826] ip (2918) used greatest stack depth: 13112 bytes left
[    6.018124] qla2xxx [0000:09:00.0]-00fb:5: QLogic QMH2562 - PCI-Express Dual Channel 8Gb Fibre Channel Mezzanine HBA.
[    6.018131] qla2xxx [0000:09:00.0]-00fc:5: ISP2532: PCIe (5.0GT/s x8) @ 0000:09:00.0 hdma+ host#=5 fw=7.03.00 (90d5).
[    6.018324] qla2xxx [0000:09:00.1]-001a: : MSI-X vector count: 32.
[    6.018326] qla2xxx [0000:09:00.1]-001d: : Found an ISP2532 irq 117 iobase 0xffff8c0283149000.
[    6.019221] qla2xxx [0000:09:00.1]-00c6:6: MSI-X: Failed to enable support with 32 vectors, using 26 vectors.
[    6.165093] qla2xxx [0000:09:00.1]-706d:6: Unable to read SFP data (2/a0/0).
[    6.261402] scsi host6: qla2xxx
[    6.419736] be2net 0000:02:00.0 neteth0: Link is Up
[    6.420018] ip (3067) used greatest stack depth: 12992 bytes left
[    6.817638] qla2xxx [0000:09:00.1]-500a:6: LOOP UP detected (8 Gbps).
[    6.879176] qla2xxx [0000:09:00.0]-706d:5: Unable to read SFP data (2/a0/0).
[    6.891268] scsi 5:0:0:0: Direct-Access     IBM      1746      FAStT  1070 PQ: 0 ANSI: 5
[    6.891998] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    6.893892] scsi 5:0:0:1: Direct-Access     IBM      1746      FAStT  1070 PQ: 0 ANSI: 5
[    6.894147] sd 5:0:0:0: [sdb] 3904897024 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    6.894345] sd 5:0:0:0: [sdb] Write Protect is off
[    6.894347] sd 5:0:0:0: [sdb] Mode Sense: 77 00 10 08
[    6.894655] sd 5:0:0:1: Attached scsi generic sg3 type 0
[    6.894868] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    6.895136] scsi 5:0:0:2: Direct-Access     IBM      1746      FAStT  1070 PQ: 0 ANSI: 5
[    6.895742] sd 5:0:0:1: [sdc] 3904993492 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    6.895879] sd 5:0:0:2: Attached scsi generic sg4 type 0
[    6.895941] sd 5:0:0:1: [sdc] Write Protect is off
[    6.895943] sd 5:0:0:1: [sdc] Mode Sense: 77 00 10 08
[    6.896271] sd 5:0:0:1: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    6.896956] sd 5:0:0:2: [sdd] 3905977057 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    6.897196] sd 5:0:0:2: [sdd] Write Protect is off
[    6.897199] sd 5:0:0:2: [sdd] Mode Sense: 77 00 10 08
[    6.898736] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    6.900405] sd 5:0:0:0: [sdb] Attached SCSI disk
[    6.901727] sd 5:0:0:1: [sdc] Attached SCSI disk
[    6.902370] sd 5:0:0:2: [sdd] Attached SCSI disk
[    7.416112] qla2xxx [0000:09:00.1]-00fb:6: QLogic QMH2562 - PCI-Express Dual Channel 8Gb Fibre Channel Mezzanine HBA.
[    7.416119] qla2xxx [0000:09:00.1]-00fc:6: ISP2532: PCIe (5.0GT/s x8) @ 0000:09:00.1 hdma+ host#=6 fw=7.03.00 (90d5).
[    8.287159] qla2xxx [0000:09:00.1]-706d:6: Unable to read SFP data (2/a0/0).



[Moderator edit: changed [quote] tags to [code] tags to preserve output layout. -Hu]
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum