Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
USB xhci_hcd cannot set link state
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
MaDDeePee
Guru
Guru


Joined: 18 Aug 2004
Posts: 350
Location: Germany

PostPosted: Fri Mar 30, 2018 9:05 pm    Post subject: USB xhci_hcd cannot set link state Reply with quote

Hello :)

i got an external USB SATA Port and i am unable to get it working on my usb3 xhci.
Code:

Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Code:

Mar 30 22:53:38 MaDWorkStatioN kernel: scsi 6:0:0:0: Direct-Access     WDC WD50 EZRZ-00GZ5B1     80.0 PQ: 0 ANSI: 0
Mar 30 22:53:38 MaDWorkStatioN kernel: sd 6:0:0:0: Attached scsi generic sg5 type 0
Mar 30 22:53:39 MaDWorkStatioN kernel: xhci_hcd 0000:08:00.0: Cannot set link state.
Mar 30 22:53:39 MaDWorkStatioN kernel: usb usb4-port1: cannot disable (err = -32)
Mar 30 22:53:39 MaDWorkStatioN kernel: usb 4-1: USB disconnect, device number 18
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] Sense not available.
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] 0 512-byte logical blocks: (0 B/0 B)
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] 0-byte physical blocks
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] Write Protect is off
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] Mode Sense: 00 00 00 00
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] Asking for cache data failed
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] Assuming drive cache: write through
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] Read Capacity(10) failed: Result: hostbyte=0x01 driverbyte=0x00
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] Sense not available.
Mar 30 22:53:39 MaDWorkStatioN kernel: sd 6:0:0:0: [sdf] Attached SCSI disk
Mar 30 22:53:39 MaDWorkStatioN kernel: udevd[8055]: inotify_add_watch(7, /dev/sdf, 10) failed: No such file or directory


it kind of keeps disconnecting and reconnecting all the time...

Code:

cat /usr/src/linux/.config | grep XHCI
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_PCI=y
CONFIG_USB_XHCI_PLATFORM=y


kernel 4.14.29

connected to USB2 its working (lower speed)
Code:
Bus 002 Device 005: ID 067b:2773 Prolific Technology, Inc. PL2773 SATAII bridge controller


Any ideas what i am missing in my kernel?

8O
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum