Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[SOLVED] Keyboard not working in X11
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Goshanecr
Apprentice
Apprentice


Joined: 17 Aug 2005
Posts: 158
Location: Russia

PostPosted: Sat May 12, 2018 2:10 pm    Post subject: [SOLVED] Keyboard not working in X11 Reply with quote

Good day!

I'm tune kernel for my very cheap laptop, and I think i'm deactivate something needed by keyboard, since it is not working anymore in X11.
In console it works.
Can someone please explain to me what I broke in linux kernel?

dmesg
pastebin

kernel config
pastebin

Xorg.0.log
pastebin

And I have only one file in /etc/X11/xorg.conf.d/30-keyboard.conf
Code:
Section "InputClass"
        Identifier      "keyboard-all"
        Driver  "evdev"
        Option  "XkbLayout"     "us,ru"
        Option  "XkbRules"      "xorg"
        Option  "XkbOptions"    "grp:alt_shift_toggle,grp:switch,grp_led:scroll,compose:rwin,terminate:ctrl_alt_bksp"
        MatchIsKeyboard "on"
EndSection


When I boot with old kernel, keyboard and mouse working. But when I choose new kernel, keyboard in X session not working (mouse does not know, because I can't login and see if it working)


Last edited by Goshanecr on Thu May 17, 2018 6:11 pm; edited 1 time in total
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 44160
Location: 56N 3W

PostPosted: Tue May 15, 2018 3:07 pm    Post subject: Reply with quote

Goshanecr,

Code:
# CONFIG_USB_PCI is not set

That is needed for anything USB to work.

Your keyboard is probably not USB as it works in the console.

Your Xorg log says
Code:
[  1125.607] (WW) RADEON(0): Direct rendering disabled

It works but its slow.
Is your normal user in the video group?

The log is missing all mention of evdev, which is the Xorg part of most input device drivers.
Please post the output of emerge --info
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7198

PostPosted: Tue May 15, 2018 3:54 pm    Post subject: Reply with quote

NeddySeagoon wrote:
The log is missing all mention of evdev, which is the Xorg part of most input device drivers.

+1
Back to top
View user's profile Send private message
Goshanecr
Apprentice
Apprentice


Joined: 17 Aug 2005
Posts: 158
Location: Russia

PostPosted: Tue May 15, 2018 6:50 pm    Post subject: Reply with quote

Friends thank's a lot for your responses!

There is my info:
emerge --info
Code:
Portage 2.3.33 (python 2.7.14-final-0, default/linux/x86/17.0/desktop, gcc-7.3.0, glibc-2.26-r6, 4.16.6-gentoo i686)
=================================================================
System uname: Linux-4.16.6-gentoo-i686-Intel-R-_Pentium-R-_M_processor_1.60GHz-with-gentoo-2.4.1
KiB Mem:      251612 total,     14316 free
KiB Swap:    1048572 total,   1046772 free
Timestamp of repository gentoo: Wed, 02 May 2018 04:30:01 +0000
Head commit of repository gentoo: b20ca59cce5d6f5418479956d6367966a548297b
sh bash 4.4_p19
ld GNU ld (Gentoo 2.27 p1.0) 2.27
app-shells/bash:          4.4_p19::gentoo
dev-lang/perl:            5.26.2::gentoo
dev-lang/python:          2.7.14-r2::gentoo, 3.4.5::gentoo, 3.5.5-r1::gentoo
dev-util/cmake:           3.11.1::gentoo
dev-util/pkgconfig:       0.29.2::gentoo
sys-apps/baselayout:      2.4.1-r2::gentoo
sys-apps/openrc:          0.35.5::gentoo
sys-apps/sandbox:         2.13::gentoo
sys-devel/autoconf:       2.13::gentoo, 2.69-r4::gentoo
sys-devel/automake:       1.11.6-r3::gentoo, 1.13.4::gentoo, 1.14.1-r1::gentoo, 1.15.1-r2::gentoo, 1.16.1-r1::gentoo
sys-devel/binutils:       2.25.1-r1::gentoo, 2.26.1::gentoo, 2.27::gentoo, 2.30-r2::gentoo
sys-devel/gcc:            5.3.0::gentoo, 5.4.0-r3::gentoo, 7.3.0-r1::gentoo
sys-devel/gcc-config:     1.9.1::gentoo
sys-devel/libtool:        2.4.6-r5::gentoo
sys-devel/make:           4.2.1-r3::gentoo
sys-kernel/linux-headers: 4.16-r1::gentoo (virtual/os-headers)
sys-libs/glibc:           2.26-r6::gentoo
Repositories:

gentoo
    location: /usr/portage
    sync-type: rsync
    sync-uri: rsync://rsync.gentoo.org/gentoo-portage
    priority: -1000
    sync-rsync-verify-jobs: 1
    sync-rsync-verify-metamanifest: yes
    sync-rsync-extra-opts:
    sync-rsync-vcs-ignore: true
    sync-rsync-verify-max-age: 24

ACCEPT_KEYWORDS="x86 ~x86"
ACCEPT_LICENSE="* -@EULA"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-Os -march=pentium-m -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/share/config /usr/share/gnupg/qualified.txt"
CONFIG_PROTECT_MASK="/etc/ca-certificates.conf /etc/dconf /etc/env.d /etc/fonts/fonts.conf /etc/gconf /etc/gentoo-release /etc/php/apache2-php5.6/ext-active/ /etc/php/apache2-php7.0/ext-active/ /etc/php/apache2-php7.1/ext-active/ /etc/php/apache2-php7.2/ext-active/ /etc/php/cgi-php5.6/ext-active/ /etc/php/cgi-php7.0/ext-active/ /etc/php/cgi-php7.1/ext-active/ /etc/php/cgi-php7.2/ext-active/ /etc/php/cli-php5.6/ext-active/ /etc/php/cli-php7.0/ext-active/ /etc/php/cli-php7.1/ext-active/ /etc/php/cli-php7.2/ext-active/ /etc/revdep-rebuild /etc/sandbox.d /etc/terminfo"
CXXFLAGS="-Os -march=pentium-m -pipe"
DISTDIR="/usr/portage/distfiles"
FCFLAGS="-O2 -march=i686 -pipe"
FEATURES="assume-digests binpkg-logs config-protect-if-modified distlocks ebuild-locks fixlafiles merge-sync multilib-strict news parallel-fetch preserve-libs protect-owned sandbox sfperms strict unknown-features-warn unmerge-logs unmerge-orphans userfetch userpriv usersandbox usersync xattr"
FFLAGS="-O2 -march=i686 -pipe"
GENTOO_MIRRORS="http://distfiles.gentoo.org"
LANG="ru_RU.utf8"
LC_ALL=""
LDFLAGS="-Wl,-O1 -Wl,--as-needed"
LINGUAS="ru en ru_RU en_US"
MAKEOPTS="-j1"
PKGDIR="/usr/portage/packages"
PORTAGE_CONFIGROOT="/"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --omit-dir-times --compress --force --whole-file --delete --stats --human-readable --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --exclude=/.git"
PORTAGE_TMPDIR="/var/tmp"
USE="X a52 aac acl acpi alsa berkdb branding bzip2 cairo cdda cli consolekit crypt cxx dbus dri dts emboss encode exif fam flac fortran gdbm gif glamor gpm iconv jpeg lcms libnotify mad minimal mng modules mp3 mp4 mpeg ncurses nls nptl ogg opengl openmp pam pango pcre pdf png policykit ppds qt3support qt5 readline sdl seccomp spell ssl startup-notification svg tcpd tiff truetype udev udisks unicode upower usb vorbis wifi wxwidgets x264 x86 xattr xcb xml xorg xv xvid zlib" ABI_X86="32" ALSA_CARDS="ali5451 als4000 atiixp atiixp-modem bt87x ca0106 cmipci emu10k1 emu10k1x ens1370 ens1371 es1938 es1968 fm801 hda-intel intel8x0 intel8x0m maestro3 trident usb-audio via82xx via82xx-modem ymfpci" APACHE2_MODULES="actions alias auth_basic authn_alias authn_anon authn_core authn_dbm authn_file authz_core authz_dbm authz_groupfile authz_host authz_owner authz_user autoindex cache deflate dir env expires ext_filter file_cache filter headers include info log_config logio mime mime_magic negotiation rewrite setenvif socache_shmcb status unique_id unixd usertrack vhost_alias" CALLIGRA_FEATURES="karbon plan sheets stage words" COLLECTD_PLUGINS="df interface irq load memory rrdtool swap syslog" CPU_FLAGS_X86="mmx mmxext sse sse2" ELIBC="glibc" GPSD_PROTOCOLS="ashtech aivdm earthmate evermore fv18 garmin garmintxt gpsclock isync itrax mtk3301 nmea ntrip navcom oceanserver oldstyle oncore rtcm104v2 rtcm104v3 sirf skytraq superstar2 timing tsip tripmate tnt ublox ubx" INPUT_DEVICES="evdev keyboard mouse synaptics" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" LIBREOFFICE_EXTENSIONS="presenter-console presenter-minimizer" OFFICE_IMPLEMENTATION="libreoffice" PHP_TARGETS="php5-6 php7-0" POSTGRES_TARGETS="postgres9_5" PYTHON_SINGLE_TARGET="python3_5" PYTHON_TARGETS="python2_7 python3_5" RUBY_TARGETS="ruby22" USERLAND="GNU" VIDEO_CARDS="radeon modesetting r200" XTABLES_ADDONS="quota2 psd pknock lscan length2 ipv4options ipset ipp2p iface geoip fuzzy condition tee tarpit sysrq steal rawnat logmark ipmark dhcpmac delude chaos account"
Unset:  CC, CPPFLAGS, CTARGET, CXX, EMERGE_DEFAULT_OPTS, ENV_UNSET, INSTALL_MASK, PORTAGE_BINHOST, PORTAGE_BUNZIP2_COMMAND, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS


grep goshanecr /etc/group
Code:
adm:x:4:root,adm,daemon,goshanecr
wheel:x:10:root,goshanecr
console:x:17:goshanecr
audio:x:18:goshanecr
cdrom:x:19:goshanecr
video:x:27:root,goshanecr
usb:x:85:goshanecr
users:x:100:goshanecr
sshd:x:22:goshanecr
games:x:35:goshanecr

Seems that my user in video group. Now I'm try to enable ISA bus support in kernel and see if it helps. I'l write after results.

Thank you Guys one more time!

P.S. and I will be grateful if you help me with non enabled direct rendering.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 44160
Location: 56N 3W

PostPosted: Tue May 15, 2018 7:15 pm    Post subject: Reply with quote

Goshanecr,

If your PC was made in the last 20 years you don't need ISA bus support.
ISA bus plug and play was best turned off, which makes using ISA devices a bit of a black art.
Its not something you should learn today unless you are doing computer archaeology.

Your emerge --info is OK. You will need that USB option in the kernel. It should only be off on systems that provide USB support without using a PCI bus to do it. e.g. Raspberry Pi and the like. It saves kernel bloat building the PCI to USB code.

Lets go back a bit.
Pastebin dmesg. That may show some errors.
Post the output of lspci, so we can see your hardware.
After your kernel is fixed for USB support, connect your USB devices and post the output of lsusb.

We will fix your hardware accelerated video, and anything else we find before we let you go. :)
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Goshanecr
Apprentice
Apprentice


Joined: 17 Aug 2005
Posts: 158
Location: Russia

PostPosted: Tue May 15, 2018 8:32 pm    Post subject: Reply with quote

NeddySeagoon,

About ISA, I'm turn this option ON because see it on lspci output :) Ok, I'm uncheck it. CONFIG_USB_PCI I'm turn ON.

Actual .config:
Pastebin

dmesg
Pastebin

lspci -v
Code:
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
        Subsystem: Sony Corporation 82855PM Processor to I/O Controller
        Flags: bus master, fast devsel, latency 0
        Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: [e4] Vendor Specific Information: Len=04 <?>
        Capabilities: [a0] AGP version 2.0

00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
        Flags: bus master, 66MHz, fast devsel, latency 96
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00003000-00003fff [size=4K]
        Memory behind bridge: d0100000-d01fffff [size=1M]
        Prefetchable memory behind bridge: d8000000-dfffffff [size=128M]

00:1d.0 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at 1800 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at 1820 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
        Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at 1840 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
        Subsystem: Sony Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
        Flags: bus master, medium devsel, latency 0, IRQ 9
        Memory at d0000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=0080
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
        I/O behind bridge: 00004000-00004fff [size=4K]
        Memory behind bridge: d0200000-d02fffff [size=1M]
        Prefetchable memory behind bridge: 10000000-17ffffff [size=128M]

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
        Flags: bus master, medium devsel, latency 0
        Kernel driver in use: lpc_ich

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Sony Corporation 82801DBM (ICH4-M) IDE Controller
        Flags: bus master, medium devsel, latency 0, IRQ 255
        I/O ports at 01f0 [size=8]
        I/O ports at 03f4
        I/O ports at 0170 [size=8]
        I/O ports at 0374
        I/O ports at 1860 [size=16]
        Memory at 18000000 (32-bit, non-prefetchable) [size=1K]
        Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
        Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller
        Flags: medium devsel, IRQ 9
        I/O ports at 1880 [size=32]
        Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
        Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
        Flags: bus master, medium devsel, latency 0, IRQ 9
        I/O ports at 1c00 [size=256]
        I/O ports at 18c0 [size=64]
        Memory at d0000c00 (32-bit, non-prefetchable) [size=512]
        Memory at d0000800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2
        Kernel driver in use: snd_intel8x0

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
        Subsystem: Sony Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller
        Flags: bus master, medium devsel, latency 0, IRQ 255
        I/O ports at 2400 [size=256]
        I/O ports at 2000 [size=128]
        Capabilities: [50] Power Management version 2

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV280/M9+ [Mobility Radeon 9200 AGP] (rev 01) (prog-if 00 [VGA controller])
        Subsystem: Sony Corporation RV280/M9+ [Mobility Radeon 9200 AGP]
        Flags: fast Back2Back, 66MHz, medium devsel, IRQ 9
        Memory at d8000000 (32-bit, prefetchable) [size=128M]
        I/O ports at 3000 [size=256]
        Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: [58] AGP version 2.0
        Capabilities: [50] Power Management version 2
        Kernel driver in use: radeon

02:04.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
        Subsystem: Sony Corporation PCI7420 CardBus Controller
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at 1c000000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 10000000-13ffffff (prefetchable)
        Memory window 1: 20000000-23ffffff
        I/O window 0: 00004400-000044ff
        I/O window 1: 00004800-000048ff
        16-bit legacy interface ports at 0001
        Capabilities: [a0] Power Management version 2

02:04.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller (prog-if 10 [OHCI])
        Subsystem: Sony Corporation PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
        Flags: bus master, medium devsel, latency 64, IRQ 255
        Memory at d0207000 (32-bit, non-prefetchable) [size=2K]
        Memory at d0200000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2

02:04.3 Mass storage controller: Texas Instruments PCI7420/7620 SD/MS-Pro Controller
        Subsystem: Sony Corporation PCI7420/7620 SD/MS-Pro Controller
        Flags: bus master, medium devsel, latency 64, IRQ 255
        Memory at d0204000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2

02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
        Subsystem: Sony Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller
        Flags: bus master, medium devsel, latency 66, IRQ 9
        Memory at d0205000 (32-bit, non-prefetchable) [size=4K]
        I/O ports at 4000 [size=64]
        Capabilities: [dc] Power Management version 2
        Kernel driver in use: e100

02:0b.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
        Subsystem: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection
        Flags: bus master, medium devsel, latency 64, IRQ 9
        Memory at d0206000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2


lsusb -v (without any connected USB device, because I'm not use it on that laptop. Only integrateg keyboard and touchpad.
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            9 Hub
  bDeviceSubClass         0
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0002 2.0 root hub
  bcdDevice            4.16
  iManufacturer           3 Linux 4.16.6-gentoo ehci_hcd
  iProduct                2 EHCI Host Controller
  iSerial                 1 0000:00:1d.7
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0004  1x 4 bytes
        bInterval              12
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             6
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood       10 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
   Port 3: 0000.0100 power
   Port 4: 0000.0100 power
   Port 5: 0000.0100 power
   Port 6: 0000.0100 power
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            4.16
  iManufacturer           3 Linux 4.16.6-gentoo uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.2
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            4.16
  iManufacturer           3 Linux 4.16.6-gentoo uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.1
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            9 Hub
  bDeviceSubClass         0
  bDeviceProtocol         0 Full speed (or root) hub
  bMaxPacketSize0        64
  idVendor           0x1d6b Linux Foundation
  idProduct          0x0001 1.1 root hub
  bcdDevice            4.16
  iManufacturer           3 Linux 4.16.6-gentoo uhci_hcd
  iProduct                2 UHCI Host Controller
  iSerial                 1 0000:00:1d.0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           25
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         9 Hub
      bInterfaceSubClass      0
      bInterfaceProtocol      0 Full speed (or root) hub
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0002  1x 2 bytes
        bInterval             255
Hub Descriptor:
  bLength               9
  bDescriptorType      41
  nNbrPorts             2
  wHubCharacteristic 0x000a
    No power switching (usb 1.0)
    Per-port overcurrent protection
  bPwrOn2PwrGood        1 * 2 milli seconds
  bHubContrCurrent      0 milli Ampere
  DeviceRemovable    0x00
  PortPwrCtrlMask    0xff
 Hub Port Status:
   Port 1: 0000.0100 power
   Port 2: 0000.0100 power
can't get debug descriptor: Resource temporarily unavailable
Device Status:     0x0001
  Self Powered
Back to top
View user's profile Send private message
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7198

PostPosted: Tue May 15, 2018 8:35 pm    Post subject: Reply with quote

Still missing the important part of xorg ; we should see
- evdev is in use
- evdev module match xorg server module
- evdev detecting keyboard, mouse...

And all of this is still hidden in your pastebin xorg.log
Back to top
View user's profile Send private message
Goshanecr
Apprentice
Apprentice


Joined: 17 Aug 2005
Posts: 158
Location: Russia

PostPosted: Tue May 15, 2018 9:09 pm    Post subject: Reply with quote

krinn wrote:
Still missing the important part of xorg ; we should see
- evdev is in use
- evdev module match xorg server module
- evdev detecting keyboard, mouse...

And all of this is still hidden in your pastebin xorg.log


But I'm not strip anything from Xorg.0.log :(
There is x11-related packages:
ls /var/db/pkg/x11-base/
Code:
xcb-proto-1.13/        xorg-drivers-1.19/     xorg-proto-2018.4/     xorg-server-1.19.5-r1/ xorg-x11-7.4-r2/


ls /var/db/pkg/x11-drivers/
Code:
xf86-input-evdev-2.10.5  xf86-input-keyboard-1.9.0  xf86-input-mouse-1.9.2  xf86-input-synaptics-1.9.0  xf86-video-ati-18.0.1


Maybe I need to increase verbosity of Xorg startup?

Now I'm go sleep. Thank for help!
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 44160
Location: 56N 3W

PostPosted: Wed May 16, 2018 12:39 pm    Post subject: Reply with quote

Goshanecr,

Graphics stuff first as its in dmesg first.

dmesg:

[    0.128013] [drm] initializing kernel modesetting (RV280 0x1002:0x5C61 0x104D:0x8195 0x01).
[    0.130452] [drm:0xc12db1e1] *ERROR* Unable to acquire AGP: -19
[    0.130575] [drm] Forcing AGP to PCI mode
...
[    0.136050] [drm] Loading R200 Microcode
[    0.136209] radeon 0000:01:00.0: Direct firmware load for radeon/R200_cp.bin failed with error -2
[    0.136423] radeon_cp: Failed to load firmware "radeon/R200_cp.bin"
[    0.136548] [drm:0xc1308913] *ERROR* Failed to load firmware!


Your lspci says you have an Intel chipset, so your kernel needs the Intel AGP driver.
Code:
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
Here you choose motherboard chipset support, not graphics card.
That should fix the first part of the graphics problem above.

The firmware is required for Hardware 3D support. It must be available when the radeon kernel module initalises.
That means when radeon is built into the kernel, the firmware must be too.
Code:
emerge linux-firmware
to get the firmware so its available at kernel build time.

In
Code:
CONFIG_EXTRA_FIRMWARE=""
enter radeon/R200_cp.bin
When you do that, another option will appear. In this new option, enter /lib/firmware/
I forget the name of the option but its the path to the top level of the firmware tree.

Rebuild the kernel and that should fix your graphics. I'll read the rest of dmesg and make another post after lunch.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7198

PostPosted: Wed May 16, 2018 2:33 pm    Post subject: Reply with quote

Goshanecr wrote:
But I'm not strip anything from Xorg.0.log :(

I'm not saying you did, i'm saying it is :)
Your dmesg is also strip ; maybe a limit from pastebin?
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 44160
Location: 56N 3W

PostPosted: Wed May 16, 2018 3:33 pm    Post subject: Reply with quote

Goshanecr,

Heres your PS/2 controller being detected in dmesg. It will be used for the keyboard and maybe for the touchpad too.
Touchpads vary.
Code:
[    0.474331] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

Your kernel looks OK too.

Please post the output of
Code:
cat /etc/X11/xorg.conf.d/*
and
Code:
ls -l /dev/input

_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Goshanecr
Apprentice
Apprentice


Joined: 17 Aug 2005
Posts: 158
Location: Russia

PostPosted: Wed May 16, 2018 5:29 pm    Post subject: Reply with quote

Good day Friends!

Today I'm go home too late from work, so I have a not much time for compilation especially on that old laptop :) Thanks for Yours answers and suggestions.
That's info what I have now:
cat /etc/X11/xorg.conf.d/*
Code:
#
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.

Section "InputClass"
        Identifier "evdev pointer catchall"
        MatchIsPointer "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev keyboard catchall"
        MatchIsKeyboard "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchpad catchall"
        MatchIsTouchpad "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev tablet catchall"
        MatchIsTablet "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection

Section "InputClass"
        Identifier "evdev touchscreen catchall"
        MatchIsTouchscreen "on"
        MatchDevicePath "/dev/input/event*"
        Driver "evdev"
EndSection
Section "OutputClass"
        Identifier "Radeon"
        MatchDriver "radeon"
        Driver "radeon"
EndSectionSection "Files"
EndSection
Section "InputClass"
        Identifier      "keyboard-all"
        Driver  "evdev"
        Option  "XkbLayout"     "us,ru"
#       Option  "XkbModel"      "logitech_g15"
        Option  "XkbRules"      "xorg"
        Option  "XkbOptions"    "grp:alt_shift_toggle,grp:switch,grp_led:scroll,compose:rwin,terminate:ctrl_alt_bksp"
#       Option  "XkbVariant"    ",qwerty"
        MatchIsKeyboard "on"
EndSection


ls -l /dev/input
Code:
crw------- 1 root root 13, 64 май 16 21:41 event0
crw------- 1 root root 13, 65 май 16 21:41 event1
crw------- 1 root root 13, 66 май 16 21:41 event2
crw------- 1 root root 13, 67 май 16 21:41 event3
crw------- 1 root root 13, 63 май 16 21:41 mice
crw------- 1 root root 13, 32 май 16 21:41 mouse0


krinn
Quote:
Your dmesg is also strip ; maybe a limit from pastebin?

I'm extremely shrink kernel and as I remember I'm turn off options related to kernel printk, and select various minimal buffers for printk, maybe that's reason of stripping?

NeddySeagoon
Quote:
Your lspci says you have an Intel chipset, so your kernel needs the Intel AGP driver.
Код:
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
Here you choose motherboard chipset support, not graphics card.
That should fix the first part of the graphics problem above.

Yes, I'm understand this yesterday and change agpgart t intel:
grep AGP /usr/src/linux/.config
Code:
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set


About firmware, I'm write results later. Thank's a lot!!!
Back to top
View user's profile Send private message
Goshanecr
Apprentice
Apprentice


Joined: 17 Aug 2005
Posts: 158
Location: Russia

PostPosted: Wed May 16, 2018 6:51 pm    Post subject: Reply with quote

About non working video acceleration: Problem solved after recommendations related to firmware.
Thank's for NeddySeagoon
Back to top
View user's profile Send private message
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7198

PostPosted: Thu May 17, 2018 1:22 am    Post subject: Reply with quote

Your thread looks like my local shop vendor, where he make sure to sell me anything, but not what i have asked :)
You know, like i need sugar to do a cake, he speak about all flavour of coffee and i end up buying him some ; just to go home without sugar for my cake and my coffee.

Don't get me wrong, i do find it funny how your thread turn out, because like me and my sugar, you might wonder how good an accelerate xorg is without a keyboard and mouse :D

On a more serious note then, you can see my input entry (note the permissions difference with you, so wrong perm and wrong group)
Code:
crw-rw---- 1 root input 13, 73 16 mai   13:26 event9
crw-rw---- 1 root input 13, 63 16 mai   13:26 mice


Should be answer to your "initial" problem


edit: i knew this remind me something, solve here (say thx to JagLover)
Back to top
View user's profile Send private message
Goshanecr
Apprentice
Apprentice


Joined: 17 Aug 2005
Posts: 158
Location: Russia

PostPosted: Thu May 17, 2018 4:46 am    Post subject: Reply with quote

krinn wrote:
Your thread looks like my local shop vendor, where he make sure to sell me anything, but not what i have asked :)
You know, like i need sugar to do a cake, he speak about all flavour of coffee and i end up buying him some ; just to go home without sugar for my cake and my coffee.

Don't get me wrong, i do find it funny how your thread turn out, because like me and my sugar, you might wonder how good an accelerate xorg is without a keyboard and mouse :D

:) :) :)
Yes, it is some questions not fully related to original topic, but it is side effect from my logs. But I don't wanna be obtrusive :)

krinn wrote:

On a more serious note then, you can see my input entry (note the permissions difference with you, so wrong perm and wrong group)
Code:
crw-rw---- 1 root input 13, 73 16 mai   13:26 event9
crw-rw---- 1 root input 13, 63 16 mai   13:26 mice

Should be answer to your "initial" problem
edit: i knew this remind me something, solve here (say thx to JagLover)


I try to do:
Code:

chown root:input /dev/input/*
chmod 660 /dev/input/*
rc-service xdm restart

ls -la /dev/input
crw-rw----  1 root input 13, 64 май 16 23:48 event0
crw-rw----  1 root input 13, 65 май 16 23:48 event1
crw-rw----  1 root input 13, 66 май 16 23:48 event2
crw-rw----  1 root input 13, 67 май 16 23:48 event3
crw-rw----  1 root input 13, 63 май 16 23:48 mice
crw-rw----  1 root input 13, 32 май 16 23:48 mouse0


rc-config show all
Code:
Status of init scripts in runlevel "boot"
  binfmt                    [started]
  bootmisc                  [started]
  fsck                      [started]
  hostname                  [started]
  hwclock                   [started]
  keymaps                   [started]
  localmount                [started]
  loopback                  [started]
  modules                   [started]
  mtab                      [started]
  opentmpfiles-setup        [started]
  procfs                    [started]
  root                      [started]
  swap                      [started]
  sysctl                    [started]
  termencoding              [started]
  urandom                   [started]
Status of init scripts in runlevel "default"
  cronie                    [started]
  dbus                      [started]
  local                     [started]
  net.eth0                  [started]
  net.lo                    [started]
  netmount                  [started]
  sshd                      [started]
  syslog-ng                 [started]
  xdm                       [started]
Status of init scripts in runlevel "nonetwork"
  local                     [started]
Status of init scripts in runlevel "shutdown"
  killprocs                 [stopped]
  mount-ro                  [stopped]
  savecache                 [stopped]
Status of init scripts in runlevel "sysinit"
  cgroups                   [started]
  devfs                     [started]
  dmesg                     [started]
  kmod-static-nodes         [started]
  opentmpfiles-dev          [started]
  sysfs                     [started]
  udev                      [started]
  udev-trigger              [started]


And keyboard not working in X :(

Also I think that there is kernel config problem because when I boot with old kernel, without any additional manipulations all works fine.
Back to top
View user's profile Send private message
Goshanecr
Apprentice
Apprentice


Joined: 17 Aug 2005
Posts: 158
Location: Russia

PostPosted: Thu May 17, 2018 5:10 am    Post subject: Reply with quote

There is a diff with old and new kernel config:
Code:
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_DEBUG_RODATA=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_FHANDLE=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_RD_GZIP=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLOB=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_HT_IRQ=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_DEFAULT_CUBIC=y
CONFIG_TCP_MD5SIG=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_NET_DEVLINK=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_SCSI_PROC_FS=y
CONFIG_CHR_DEV_SG=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_WLAN=y
CONFIG_ATH_COMMON=m
CONFIG_WLAN_VENDOR_ATH=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
CONFIG_ATH9K_BTCOEX_SUPPORT=y
CONFIG_ATH9K_HTC=m
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_THERMAL_HWMON=y
CONFIG_AGP_ATI=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=1
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_DRIVERS=y
CONFIG_HIDRAW=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_SONY_LAPTOP=y
CONFIG_SONYPI_COMPAT=y
CONFIG_EXPORTFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_DEBUG_FS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_DOUBLEFAULT=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_GENERIC_IO=y
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_ARCH_HAS_MMIO_FLUSH=y

I think I try all related to USB and PS2

Also there is info about udev, since I'm read from krinn link, that udev problem responsible for similar problem.
rc-service udev restart
Code:
 * WARNING: you are stopping a sysinit service
 * WARNING: you are stopping a sysinit service
 * Stopping udev ...
 * Failed to stop udev using udevadm                                                                                                                                                        [ !! ]
 * Trying with start-stop-daemon ...
 * start-stop-daemon: no matching processes found                                                                                                                                           [ ok ]
 * Starting udev ...
starting version 238                                                                                                                                                                        [ ok ]
localhost /home/goshanecr #  * Generating a rule to create a /dev/root symlink ...                                                                                                          [ ok ]
 * Populating /dev with existing devices through uevents ...                                                                                                                                [ ok ]

localhost /home/goshanecr #

Is it normal?
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 44160
Location: 56N 3W

PostPosted: Thu May 17, 2018 7:58 am    Post subject: Reply with quote

Goshanecr,

Code:
 * WARNING: you are stopping a sysinit service
 * WARNING: you are stopping a sysinit service
 * Stopping udev ...
 * Failed to stop udev using udevadm                                                                                                                                                        [ !! ]
 * Trying with start-stop-daemon ...
 * start-stop-daemon: no matching processes found     


The warning is normal, the errors are not.

udev creates symlinks and fixes permissions and owners in /dev
If its not running because it didn't actually start there will be nothing in
Code:
ls /dev/disk/by-id
and all your block devices will be owner and group root. HDD should be root disk.
Further, Xorg depends on udev to auto detect input devices. That's certainly broken.

Reboot and check the /dev stutf.
Restart udev.
Now start Xorg. If it works, we know where to look.

-- edit --
Your dmesg should contain something like
Code:
 $ sudo dmesg | grep -i udev
Password:
[    4.992575] udevd[270]: starting version 3.2
[    5.094288] udevd[271]: starting eudev-3.2
[    5.737931] CPU: 0 PID: 310 Comm: udevd Not tainted 4.14.14-gentoo #2

I missed that its missing. That's eudev but it should be the same.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Goshanecr
Apprentice
Apprentice


Joined: 17 Aug 2005
Posts: 158
Location: Russia

PostPosted: Thu May 17, 2018 4:26 pm    Post subject: Reply with quote

Friends! Finally I solve keyboard problem! It is appears because I turn off option needed for udev:
Code:
CONFIG_SIGNALFD=y
and I found that because your suggestions about udev not properly working and no any udev related messages in Xorg.0.log, I'm go to udev gentoo wiki and check all described requisites.

Thank's a lot!
Back to top
View user's profile Send private message
Ellison
n00b
n00b


Joined: 26 Nov 2019
Posts: 2

PostPosted: Tue Nov 26, 2019 3:06 am    Post subject: Reply with quote

Ellison wrote:
nihao
Back to top
View user's profile Send private message
Ellison
n00b
n00b


Joined: 26 Nov 2019
Posts: 2

PostPosted: Tue Nov 26, 2019 3:11 am    Post subject: Reply with quote

Goshanecr wrote:
Friends! Finally I solve keyboard problem! It is appears because I turn off option needed for udev:
Code:
CONFIG_SIGNALFD=y
and I found that because your suggestions about udev not properly working and no any udev related messages in Xorg.0.log, I'm go to udev gentoo wiki and check all described requisites.

Thank's a lot!


Ellison wrote:
I also encountered the same situation as you, that is, in X11 keyboard cannot be used, but in console can.The difference is that I use libinput as the input device driver.I have confirmed:
Code:
CONFIG_SIGNALFD=y

in X.0.log the Error log:
Code:
Unsupported  high keycode 372 for name I372 ignored ... Errors from xkbcomp are not fatal to the X server.

any body can help me?
Thank you very much!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum