Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[Solv] Touchpad not detected - Microsoft Nano Transceiver v1
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Pipeng
Tux's lil' helper
Tux's lil' helper


Joined: 23 Jul 2013
Posts: 80

PostPosted: Tue Jul 10, 2018 10:50 pm    Post subject: [Solv] Touchpad not detected - Microsoft Nano Transceiver v1 Reply with quote

Hi all, i install gentoo in this computer, but sadly i can't found the drivers for this driver, the notebook is Asus Notebook VivoBook 15 X510UF-BR135T, i run ubuntu from a live cd, and the touchpad works fine, but here is not detected, to campare here is the xinputs:

xinput from ubuntu

Code:
⎡ Virtual core pointer                       id=2   [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                 id=4   [slave  pointer  (2)]
⎜   ↳ FTE1200:00 0B05:0501 Touchpad              id=13   [slave  pointer  (2)]
⎣ Virtual core keyboard                      id=3   [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                id=5   [slave  keyboard (3)]
    ↳ Power Button                               id=6   [slave  keyboard (3)]
    ↳ Asus Wireless Radio Control                id=7   [slave  keyboard (3)]
    ↳ Video Bus                                  id=8   [slave  keyboard (3)]
    ↳ Video Bus                                  id=9   [slave  keyboard (3)]
    ↳ Sleep Button                               id=11   [slave  keyboard (3)]
    ↳ Power Button                               id=10   [slave  keyboard (3)]
    ↳ USB2.0 VGA UVC WebCam: USB2.0 V            id=12   [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard               id=15   [slave  keyboard (3)]
    ↳ Asus WMI hotkeys                           id=14   [slave  keyboard (3)]


xinput from gentoo

Code:
⎡ Virtual core pointer                       id=2   [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                 id=4   [slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® Nano Transceiver v1.0   id=13   [slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® Nano Transceiver v1.0   id=14   [slave  pointer  (2)]
⎣ Virtual core keyboard                      id=3   [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                id=5   [slave  keyboard (3)]
    ↳ Power Button                               id=6   [slave  keyboard (3)]
    ↳ Asus Wireless Radio Control                id=7   [slave  keyboard (3)]
    ↳ Video Bus                                  id=8   [slave  keyboard (3)]
    ↳ Video Bus                                  id=9   [slave  keyboard (3)]
    ↳ Power Button                               id=10   [slave  keyboard (3)]
    ↳ Sleep Button                               id=11   [slave  keyboard (3)]
    ↳ Microsoft Microsoft® Nano Transceiver v1.0   id=12   [slave  keyboard (3)]
    ↳ USB2.0 VGA UVC WebCam: USB2.0 V            id=15   [slave  keyboard (3)]
    ↳ Asus WMI hotkeys                           id=16   [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard               id=17   [slave  keyboard (3)]
    ↳ Microsoft Microsoft® Nano Transceiver v1.0   id=18   [slave  keyboard (3)]


Comparing, the missed hardware is FTE1200:00 0B05:0501 Touchpad, but i can't find where is the drivers, i test a lot of modules....

And, maybe Microsoft Microsoft® Nano Transceiver v1.0 have more missed drivers what i'm thinking.....

Here the lspci

Code:
00:00.0 Host bridge: Intel Corporation Device 5914 (rev 08)
   Subsystem: ASUSTeK Computer Inc. Device 1131
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
   Latency: 0
   Capabilities: [e0] Vendor Specific Information: Len=10 <?>

00:02.0 VGA compatible controller: Intel Corporation Device 5917 (rev 07) (prog-if 00 [VGA controller])
   Subsystem: ASUSTeK Computer Inc. Device 1131
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 123
   Region 0: Memory at ed000000 (64-bit, non-prefetchable) [size=16M]
   Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
   Region 4: I/O ports at f000 [size=64]
   [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
   Capabilities: [40] Vendor Specific Information: Len=0c <?>
   Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0
         ExtTag- RBE+
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
   Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-
      Address: feeff00c  Data: 41a1
   Capabilities: [d0] Power Management version 2
      Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: i915

00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 08)
   Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem
   Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at ef220000 (64-bit, non-prefetchable) [size=32K]
   Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
      Address: 00000000  Data: 0000
   Capabilities: [d0] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [e0] Vendor Specific Information: Len=0c <?>
   Kernel driver in use: proc_thermal
   Kernel modules: processor_thermal_device

00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21) (prog-if 30 [XHCI])
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP USB 3.0 xHCI Controller
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 124
   Region 0: Memory at ef210000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: [70] Power Management version 2
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+
      Address: 00000000feeff00c  Data: 41b1
   Kernel driver in use: xhci_hcd

00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Thermal subsystem
   Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin C routed to IRQ 18
   Region 0: Memory at ef23a000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: [50] Power Management version 3
      Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
      Address: 00000000  Data: 0000
   Kernel driver in use: intel_pch_thermal
   Kernel modules: intel_pch_thermal

00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO I2C Controller
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at ef239000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: [80] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [90] Vendor Specific Information: Len=14 <?>
   Kernel driver in use: intel-lpss
   Kernel modules: intel_lpss_pci

00:15.1 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #1 (rev 21)
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO I2C Controller
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 17
   Region 0: Memory at ef238000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: [80] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [90] Vendor Specific Information: Len=14 <?>
   Kernel driver in use: intel-lpss
   Kernel modules: intel_lpss_pci

00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP CSME HECI
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 126
   Region 0: Memory at ef237000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: [50] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
      Address: 00000000feeff00c  Data: 4142
   Kernel driver in use: mei_me
   Kernel modules: mei_me

00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21) (prog-if 01 [AHCI 1.0])
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP SATA Controller [AHCI mode]
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0
   Interrupt: pin A routed to IRQ 125
   Region 0: Memory at ef230000 (32-bit, non-prefetchable) [size=8K]
   Region 1: Memory at ef236000 (32-bit, non-prefetchable) [size=256]
   Region 2: I/O ports at f090 [size=8]
   Region 3: I/O ports at f080 [size=4]
   Region 4: I/O ports at f060 [size=32]
   Region 5: Memory at ef235000 (32-bit, non-prefetchable) [size=2K]
   Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
      Address: feeff00c  Data: 41c1
   Capabilities: [70] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
   Kernel driver in use: ahci
   Kernel modules: ahci

00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 16
   Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
   I/O behind bridge: 0000e000-0000efff
   Memory behind bridge: ee000000-ef0fffff
   Prefetchable memory behind bridge: 00000000d0000000-00000000e1ffffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0
         ExtTag- RBE+
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 256 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #1, Speed 8GT/s, Width x4, ASPM not supported, Exit Latency L0s <1us, L1 <16us
         ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 8GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
         Slot #4, PowerLimit 25.000W; Interlock- NoCompl+
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet- LinkState+
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
      DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
      LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
          EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
   Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
      Address: 00000000  Data: 0000
   Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP PCI Express Root Port
   Capabilities: [a0] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: pcieport
   Kernel modules: shpchp

00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1) (prog-if 00 [Normal decode])
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin B routed to IRQ 17
   Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
   I/O behind bridge: 0000f000-00000fff
   Memory behind bridge: ef100000-ef1fffff
   Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
   Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
   BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
      PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
   Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0
         ExtTag- RBE+
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #6, Speed 8GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <16us
         ClockPM- Surprise- LLActRep+ BwNot+ ASPMOptComp+
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
      SltCap:   AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
         Slot #9, PowerLimit 10.000W; Interlock- NoCompl+
      SltCtl:   Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta:   Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
         Changed: MRL- PresDet+ LinkState+
      RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
      RootCap: CRSVisible-
      RootSta: PME ReqID 0000, PMEStatus- PMEPending-
      DevCap2: Completion Timeout: Range ABC, TimeoutDis+, LTR+, OBFF Not Supported ARIFwd+
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled ARIFwd-
      LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
   Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
      Address: 00000000  Data: 0000
   Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP PCI Express Root Port
   Capabilities: [a0] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Kernel driver in use: pcieport
   Kernel modules: shpchp

00:1e.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO UART Controller #0 (rev 21)
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO UART Controller
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 20
   Region 0: Memory at ef234000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: [80] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [90] Vendor Specific Information: Len=14 <?>
   Kernel driver in use: intel-lpss
   Kernel modules: intel_lpss_pci

00:1e.2 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO SPI Controller #0 (rev 21)
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP Serial IO SPI Controller
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin C routed to IRQ 22
   Region 0: Memory at ef233000 (64-bit, non-prefetchable) [size=4K]
   Capabilities: [80] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [90] Vendor Specific Information: Len=14 <?>
   Kernel driver in use: intel-lpss
   Kernel modules: intel_lpss_pci

00:1f.0 ISA bridge: Intel Corporation Device 9d4e (rev 21)
   Subsystem: ASUSTeK Computer Inc. Device 1131
   Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0

00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP PMC
   Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Region 0: Memory at ef22c000 (32-bit, non-prefetchable) [size=16K]
   Kernel driver in use: intel_pmc_core

00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP HD Audio
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 32, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 128
   Region 0: Memory at ef228000 (64-bit, non-prefetchable) [size=16K]
   Region 4: Memory at ef200000 (64-bit, non-prefetchable) [size=64K]
   Capabilities: [50] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
      Address: 00000000feeff00c  Data: 4162
   Kernel driver in use: snd_hda_intel
   Kernel modules: snd_hda_intel

00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
   Subsystem: ASUSTeK Computer Inc. Sunrise Point-LP SMBus
   Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Interrupt: pin A routed to IRQ 16
   Region 0: Memory at ef232000 (64-bit, non-prefetchable) [size=256]
   Region 4: I/O ports at f040 [size=32]
   Kernel driver in use: i801_smbus
   Kernel modules: i2c_i801

01:00.0 3D controller: NVIDIA Corporation Device 174d (rev a2)
   Subsystem: ASUSTeK Computer Inc. Device 1131
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 255
   Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
   Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
   Region 3: Memory at e0000000 (64-bit, prefetchable) [size=32M]
   Region 5: I/O ports at e000 [disabled] [size=128]
   Expansion ROM at ef000000 [disabled] [size=512K]
   Capabilities: [60] Power Management version 3
      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
      Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
      Address: 0000000000000000  Data: 0000
   Capabilities: [78] Express (v2) Endpoint, MSI 00
      DevCap:   MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 25.000W
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
         MaxPayload 256 bytes, MaxReadReq 512 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
      LnkCap:   Port #0, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
         ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
      LnkCtl:   ASPM Disabled; RCB 64 bytes Disabled- CommClk+
         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 8GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR+, OBFF Via message
      DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
      LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+
          EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
   Kernel modules: nouveau, nvidia_drm, nvidia

02:00.0 Network controller: Intel Corporation Wireless 8265 / 8275 (rev 78)
   Subsystem: Intel Corporation Wireless 8265 / 8275
   Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
   Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
   Latency: 0, Cache Line Size: 64 bytes
   Interrupt: pin A routed to IRQ 127
   Region 0: Memory at ef100000 (64-bit, non-prefetchable) [size=8K]
   Capabilities: [c8] Power Management version 3
      Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
      Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
   Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
      Address: 00000000feeff00c  Data: 4152
   Capabilities: [40] Express (v2) Endpoint, MSI 00
      DevCap:   MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
      DevCtl:   Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
         RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ FLReset-
         MaxPayload 128 bytes, MaxReadReq 128 bytes
      DevSta:   CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
      LnkCap:   Port #0, Speed 2.5GT/s, Width x1, ASPM L1, Exit Latency L0s <4us, L1 <8us
         ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
      LnkCtl:   ASPM L1 Enabled; RCB 64 bytes Disabled- CommClk+
         ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
      LnkSta:   Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
      DevCap2: Completion Timeout: Range B, TimeoutDis+, LTR+, OBFF Via WAKE#
      DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-, LTR+, OBFF Disabled
      LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
          Compliance De-emphasis: -6dB
      LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-
          EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
   Kernel driver in use: iwlwifi
   Kernel modules: iwlwifi


Thx.


Last edited by Pipeng on Thu Jul 12, 2018 1:07 pm; edited 1 time in total
Back to top
View user's profile Send private message
Pipeng
Tux's lil' helper
Tux's lil' helper


Joined: 23 Jul 2013
Posts: 80

PostPosted: Thu Jul 12, 2018 1:04 pm    Post subject: Reply with quote

Hi, i found the two problems, in first part there was missed the driver in kenrnel, testing i add i2c_hid to the blacklist to test solutions, but when i start testing drivers nothing works, because i forgoten remove that blacklist, now i remove it and some driver i enable as module do this works, i don't know what module, but i2c_hid is necessary to do the tocuhpad works, maybe the driver is in that section of the kernel drivers.

Thx. Cya.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum