Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
sensors motherboard
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
bagas
n00b
n00b


Joined: 29 Jun 2018
Posts: 56

PostPosted: Thu Nov 15, 2018 5:54 pm    Post subject: sensors motherboard Reply with quote

Hello.
Please tell me how to read the data from the sensors of the motherboard?
ASUS PRIME Z370-A
Processor Intel i7-8700.
I want to see the temperature of the RAM, the speed of rotation of the fans.
Code:
# uname -rms
Linux 4.14.78-gentoo x86_64

Code:
# lspci
00:00.0 Host bridge: Intel Corporation Device 3ec2 (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Device 3e92
00:14.0 USB controller: Intel Corporation 200 Series PCH USB 3.0 xHCI Controller
00:16.0 Communication controller: Intel Corporation 200 Series PCH CSME HECI #1
00:17.0 SATA controller: Intel Corporation 200 Series PCH SATA controller [AHCI mode]
00:1b.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #17 (rev f0)
00:1c.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #1 (rev f0)
00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 (rev f0)
00:1d.0 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #9 (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device a2c9
00:1f.2 Memory controller: Intel Corporation 200 Series PCH PMC
00:1f.3 Audio device: Intel Corporation 200 Series PCH HD Audio
00:1f.4 SMBus: Intel Corporation 200 Series PCH SMBus Controller
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V
03:00.0 USB controller: ASMedia Technology Inc. Device 2142
04:00.0 Non-Volatile memory controller: Intel Corporation Device f1a6 (rev 03)

Code:
# sensors-detect
# sensors-detect revision 3.4.0+git_807f9b1529892c0ac89bca0c7ae781c59f9c8393
# Board: ASUSTeK COMPUTER INC. PRIME Z370-A
# Kernel: 4.14.78-gentoo x86_64
# Processor: Intel(R) Core(TM) i7-8700 CPU @ 3.20GHz (6/158/10)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Gentoo config file protection is active. Every file this program will
modify must be merged before the change will become active using
default Gentoo tools such as dispatch-conf, cfg-update, and etc-update.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 16h thermal sensors...                           No
AMD Family 17h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
Intel 5500/5520/X58 thermal sensor...                       No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               Yes
Found `Nuvoton NCT6793D Super IO Sensors'                   Success!
    (address 0x290, driver `nct6775')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
# DMI data unavailable, please consider installing dmidecode 2.7
# or later for better results.
Probing for `IPMI BMC KCS' at 0xca0...                      No
Probing for `IPMI BMC SMIC' at 0xca8...                     No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.4: Kaby Lake (PCH)

Next adapter: i915 gmbus dpc (i2c-0)
Do you want to scan it? (yes/NO/selectively):

Next adapter: i915 gmbus dpb (i2c-1)
Do you want to scan it? (yes/NO/selectively):

Next adapter: i915 gmbus dpd (i2c-2)
Do you want to scan it? (yes/NO/selectively):

Next adapter: DPDDC-B (i2c-3)
Do you want to scan it? (yes/NO/selectively):

Next adapter: SMBus I801 adapter at f040 (i2c-4)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x51
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)
Client found at address 0x53
Probing for `Analog Devices ADM1033'...                     No
Probing for `Analog Devices ADM1034'...                     No
Probing for `SPD EEPROM'...                                 Yes
    (confidence 8, not a hardware monitoring chip)


Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `coretemp' (built-in):
  * Chip `Intel digital thermal sensor' (confidence: 9)

Driver `nct6775' (built-in):
  * ISA bus, address 0x290
    Chip `Nuvoton NCT6793D Super IO Sensors' (confidence: 9)

No modules to load, skipping modules configuration.

Code:
# sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +119.0°C)
temp2:        +29.8°C  (crit = +119.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +29.0°C  (high = +82.0°C, crit = +100.0°C)
Core 0:        +25.0°C  (high = +82.0°C, crit = +100.0°C)
Core 1:        +28.0°C  (high = +82.0°C, crit = +100.0°C)
Core 2:        +27.0°C  (high = +82.0°C, crit = +100.0°C)
Core 3:        +26.0°C  (high = +82.0°C, crit = +100.0°C)
Core 4:        +26.0°C  (high = +82.0°C, crit = +100.0°C)
Core 5:        +27.0°C  (high = +82.0°C, crit = +100.0°C)

Code:
[ebuild   R    ] sys-apps/lm_sensors-3.4.0_p20180923:0/4.4.0::gentoo  USE="contrib -sensord -static-libs" 0 KiB
Back to top
View user's profile Send private message
Marlo
Veteran
Veteran


Joined: 26 Jul 2003
Posts: 1414

PostPosted: Thu Nov 15, 2018 7:21 pm    Post subject: Reply with quote

You can check if something in "Device Drivers > Hardware Monitoring support" is suitable for you.
_________________
Thank you for your attention, interest and support.
------------------------------------------------------------------
http://radio.garden/
Back to top
View user's profile Send private message
bagas
n00b
n00b


Joined: 29 Jun 2018
Posts: 56

PostPosted: Thu Nov 15, 2018 7:50 pm    Post subject: Reply with quote

Marlo wrote:
You can check if something in "Device Drivers > Hardware Monitoring support" is suitable for you.

only they
Code:
<*>   Intel Core/Core2/Atom temperature sensor
<*>   Nuvoton NCT6775F and compatibles
Back to top
View user's profile Send private message
bunder
Bodhisattva
Bodhisattva


Joined: 10 Apr 2004
Posts: 5845

PostPosted: Thu Nov 15, 2018 8:06 pm    Post subject: Reply with quote

not all motherboards sensors have drivers, but can you install dmidecode and show us the output?
_________________
Neddyseagoon wrote:
The problem with leaving is that you can only do it once and it reduces your influence.

banned from #gentoo since sept 2017
Back to top
View user's profile Send private message
Marlo
Veteran
Veteran


Joined: 26 Jul 2003
Posts: 1414

PostPosted: Thu Nov 15, 2018 8:30 pm    Post subject: Reply with quote

A year ago, Phoronix didn't have good news on ASUS PRIME Z370 and lm_sensors.
It's probably the IT87 out-of-tree source.
_________________
Thank you for your attention, interest and support.
------------------------------------------------------------------
http://radio.garden/
Back to top
View user's profile Send private message
bagas
n00b
n00b


Joined: 29 Jun 2018
Posts: 56

PostPosted: Fri Nov 16, 2018 6:22 am    Post subject: Reply with quote

Solved the problem.
Support for sensor driver in the kernel is.
Code:
CONFIG_SENSORS_NCT6775=y

This helped acpi_enforce_resources=lax, added to the refind system loading and after a reboot the sensors were activated.
Why so complicate?
And how can I see the temperature of the memory?
Code:
$ sensors
nct6793-isa-0290
Adapter: ISA adapter
in0:                       +0.34 V  (min =  +0.00 V, max =  +1.74 V)
in1:                       +1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                       +3.42 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                       +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                       +0.16 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                       +0.00 V  (min =  +0.00 V, max =  +0.00 V)
in7:                       +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                       +3.18 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                       +1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                      +0.60 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                      +1.23 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                      +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                      +0.32 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                      +1.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                      803 RPM  (min =    0 RPM)
fan2:                     1064 RPM  (min =    0 RPM)
fan3:                        0 RPM  (min =    0 RPM)
fan4:                        0 RPM  (min =    0 RPM)
fan5:                        0 RPM  (min =    0 RPM)
fan6:                      838 RPM
SYSTIN:                    +29.0°C  (high = +98.0°C, hyst = +95.0°C)  sensor = thermistor
CPUTIN:                    +27.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                  -128.0°C    sensor = thermistor
AUXTIN1:                   +50.0°C    sensor = thermistor
AUXTIN2:                   +14.0°C    sensor = thermistor
AUXTIN3:                   +18.0°C    sensor = thermistor
PECI Agent 0:              +30.0°C  (high = +98.0°C, hyst = +95.0°C)
                                    (crit = +100.0°C)
PECI Agent 0 Calibration:  +27.0°C 
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C 
PCH_CHIP_TEMP:              +0.0°C 
intrusion0:               ALARM
intrusion1:               OK
beep_enable:              disabled

acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +119.0°C)
temp2:        +29.8°C  (crit = +119.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +32.0°C  (high = +82.0°C, crit = +100.0°C)
Core 0:        +27.0°C  (high = +82.0°C, crit = +100.0°C)
Core 1:        +29.0°C  (high = +82.0°C, crit = +100.0°C)
Core 2:        +31.0°C  (high = +82.0°C, crit = +100.0°C)
Core 3:        +27.0°C  (high = +82.0°C, crit = +100.0°C)
Core 4:        +32.0°C  (high = +82.0°C, crit = +100.0°C)
Core 5:        +28.0°C  (high = +82.0°C, crit = +100.0°C)
Back to top
View user's profile Send private message
Marlo
Veteran
Veteran


Joined: 26 Jul 2003
Posts: 1414

PostPosted: Fri Nov 16, 2018 11:42 am    Post subject: Reply with quote

Well, if the kernel is changed and compiled, the kernel must also be loaded via reboot. :twisted:
_________________
Thank you for your attention, interest and support.
------------------------------------------------------------------
http://radio.garden/
Back to top
View user's profile Send private message
bagas
n00b
n00b


Joined: 29 Jun 2018
Posts: 56

PostPosted: Sun Nov 18, 2018 2:38 pm    Post subject: Reply with quote

information is not read from acpitz-virtual-0 Adapter: Virtual device
Code:
acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +119.0°C)
temp2:        +29.8°C  (crit = +119.0°C)

Data is not updated.
What to do?
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43195
Location: 56N 3W

PostPosted: Sun Nov 18, 2018 3:44 pm    Post subject: Reply with quote

bagas,

Code:
$ sensors
nct6793-isa-0290
needs your /etc/sensors.conf file set up, or whatever its called today.
You may find a suitable file on the web, or it may even be commented out in /etc/sensors.conf already.

The problem is that the nct6793 will be used or lots of different motherboards. The will all map the voltage inputs to different voltages and they will all use different scale factors.
The /etc/sensors.conf for your motherboard will fix the voltage names and scale factors.

There are two sorts of sensors in use. Thermistors, which are resistors that change resistance with tempreture and diodes where the change in forward voltage drop is -2mv/Deg C.
You need to know which sort is used where

Neither produce very accurate temperature readings but in general, you don't care.
What matters is "Is the temperature normal?"

To get the RAM temperature, you need sensors on the RAM and the sensors need to be connected to something.

-- edit --

https://www.kernel.org/doc/Documentation/hwmon/nct6775 may be worth reading.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Tony0945
Advocate
Advocate


Joined: 25 Jul 2006
Posts: 3077
Location: Illinois, USA

PostPosted: Sun Nov 18, 2018 7:08 pm    Post subject: Reply with quote

Re nct6775
I've had great success on 4.4 and 4.9 kernels just copying the later kernels' nct6775.c into the older tree.
I ran meld on them and the main difference is that the later kernels have more table entries. And a MACRO was added or deleted, I don't remember which. The MACRO does the same bit manipulation in any case so there is no difference to the compiler, just the programmer's taste.

I had to do this for support of my MSI B350 Tomahawk Arctic White.
Back to top
View user's profile Send private message
CondeProlog
n00b
n00b


Joined: 09 Oct 2018
Posts: 7

PostPosted: Mon Nov 19, 2018 11:53 pm    Post subject: Reply with quote

bagas wrote:

And how can I see the temperature of the memory?


To get RAM temperatures with lm_sensors you need to load the jc42 driver (CONFIG_SENSORS_JC42).
Back to top
View user's profile Send private message
bagas
n00b
n00b


Joined: 29 Jun 2018
Posts: 56

PostPosted: Fri Nov 23, 2018 5:35 am    Post subject: Reply with quote

CondeProlog wrote:
bagas wrote:

And how can I see the temperature of the memory?


To get RAM temperatures with lm_sensors you need to load the jc42 driver (CONFIG_SENSORS_JC42).

Added to the core, the output of the sensor information has not changed.
Back to top
View user's profile Send private message
bagas
n00b
n00b


Joined: 29 Jun 2018
Posts: 56

PostPosted: Fri Nov 23, 2018 5:41 am    Post subject: Reply with quote

Tell me, how can I remove the unnecessary from the output of the sensor?
Code:
# cat /etc/sensors3.conf
chip "nct6791-*"

ignore in1
ignore in2
ignore in3
ignore in4
ignore in5
ignore in6
ignore in7
ignore in8
ignore in9
ignore in10
ignore in11
ignore in12
ignore in13
ignore in14
ignore fan3
ignore fan4
ignore fan5

label temp2 "CPU Temp"
label temp1 "MB Temp"
label fan1 "System Fan"
label fan2 "CPU Fan"
label fan6 "System Fan 1"
chip "acpitz-virtual-0"
chip "coretemp-isa-0000"

remove from the information output these items:
Code:
in0:                       +0.33 V  (min =  +0.00 V, max =  +1.74 V)
in1:                       +1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                       +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                       +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                       +0.16 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                       +0.13 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                       +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                       +3.18 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                      +0.60 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                      +1.23 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                      +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                      +0.32 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                      +1.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan3:                        0 RPM  (min =    0 RPM)
fan4:                        0 RPM  (min =    0 RPM)
fan5:                        0 RPM  (min =    0 RPM)

rename:
Code:
fan1:                      855 RPM  (min =    0 RPM)
fan2:                     1071 RPM  (min =    0 RPM)
fan6:                      898 RPM
temp1:        +27.8°C  (crit = +119.0°C)
temp2:        +29.8°C  (crit = +119.0°C)

now so.
Code:
# sensors
nct6793-isa-0290
Adapter: ISA adapter
in0:                       +0.33 V  (min =  +0.00 V, max =  +1.74 V)
in1:                       +1.03 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in2:                       +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in3:                       +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in4:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                       +0.16 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in6:                       +0.13 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in7:                       +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in8:                       +3.18 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                       +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in10:                      +0.60 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in11:                      +1.23 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in12:                      +1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                      +0.32 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                      +1.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                      855 RPM  (min =    0 RPM)
fan2:                     1071 RPM  (min =    0 RPM)
fan3:                        0 RPM  (min =    0 RPM)
fan4:                        0 RPM  (min =    0 RPM)
fan5:                        0 RPM  (min =    0 RPM)
fan6:                      898 RPM
SYSTIN:                    +32.0°C  (high = +98.0°C, hyst = +95.0°C)  sensor = thermistor
CPUTIN:                    +30.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                  -128.0°C    sensor = thermistor
AUXTIN1:                   +50.0°C    sensor = thermistor
AUXTIN2:                   +14.0°C    sensor = thermistor
AUXTIN3:                   +18.0°C    sensor = thermistor
PECI Agent 0:              +32.0°C  (high = +98.0°C, hyst = +95.0°C)
                                    (crit = +100.0°C)
PECI Agent 0 Calibration:  +30.5°C 
PCH_CHIP_CPU_MAX_TEMP:      +0.0°C 
PCH_CHIP_TEMP:              +0.0°C 
intrusion0:               ALARM
intrusion1:               OK
beep_enable:              disabled

acpitz-virtual-0
Adapter: Virtual device
temp1:        +27.8°C  (crit = +119.0°C)
temp2:        +29.8°C  (crit = +119.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Package id 0:  +35.0°C  (high = +82.0°C, crit = +100.0°C)
Core 0:        +30.0°C  (high = +82.0°C, crit = +100.0°C)
Core 1:        +33.0°C  (high = +82.0°C, crit = +100.0°C)
Core 2:        +33.0°C  (high = +82.0°C, crit = +100.0°C)
Core 3:        +30.0°C  (high = +82.0°C, crit = +100.0°C)
Core 4:        +31.0°C  (high = +82.0°C, crit = +100.0°C)
Core 5:        +35.0°C  (high = +82.0°C, crit = +100.0°C)

Code:
# rc-update -a | grep lm_sen
           lm_sensors |      default

Code:
[ebuild   R    ] sys-apps/lm_sensors-3.4.0_p20180923:0/4.4.0::gentoo  USE="contrib -sensord -static-libs" 0 KiB
Back to top
View user's profile Send private message
bagas
n00b
n00b


Joined: 29 Jun 2018
Posts: 56

PostPosted: Sun Nov 25, 2018 10:33 am    Post subject: Reply with quote

The problem is not solved.
Back to top
View user's profile Send private message
Muso
l33t
l33t


Joined: 22 Oct 2002
Posts: 980
Location: The Holy city of Honolulu

PostPosted: Sun Nov 25, 2018 10:40 am    Post subject: Reply with quote

bagas wrote:
The problem is not solved.


The problem seems to be with the sensors and Linux drivers, not the Gentoo implementation of the software itself.
_________________
Time is a great teacher, but unfortunately it kills all its pupils.
Back to top
View user's profile Send private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 43195
Location: 56N 3W

PostPosted: Sun Nov 25, 2018 1:32 pm    Post subject: Reply with quote

bagas,

Remove lines that you do not want displayed from your /etc/sensors3.conf
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profile Send private message
Ant P.
Watchman
Watchman


Joined: 18 Apr 2009
Posts: 5761

PostPosted: Sun Nov 25, 2018 1:57 pm    Post subject: Reply with quote

Use the correct chip name in sensors.conf.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum