Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Short freezes after waking up from suspend
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
ganywa
n00b
n00b


Joined: 13 Dec 2018
Posts: 4

PostPosted: Thu Dec 13, 2018 4:48 am    Post subject: Short freezes after waking up from suspend Reply with quote

Hi,
Sometimes my computer is frozen for a few seconds (it can vary a lot between 1 and around 10-15 seconds) after waking up from suspend. When frozen, the monitor is working (i.e. I can see what I saw before suspending, but it doesn't show any changes until it comes out of the freeze), but everything else seems to be stopped.
After the freeze everything works normally, and everything I did during it has its effect, so e.g. if I was typing 'foo' when it was frozen nothing happened, but after its end, 'foo' would be typed.
This doesn't happen after hibernating (at least I haven't experienced it).
The onset is seemingly random (I couldn't find a pattern in when it froze and when it did not), though usually directly after boot there is no freeze with the first suspend.

Here are the respective parts of dmesg:

With freeze:
Code:
[ 1073.500751] ACPI: Waking up from system sleep state S3
[ 1073.592755] ACPI: EC: interrupt unblocked
[ 1073.607282] ACPI: EC: event unblocked
[ 1073.608643] sd 1:0:0:0: [sdb] Starting disk
[ 1073.608644] sd 0:0:0:0: [sda] Starting disk
[ 1073.621408] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 1073.681847] r8169 0000:04:00.0 enp4s0: link down
[ 1073.833571] usb 1-1.6: reset full-speed USB device number 3 using ehci-pci
[ 1073.833577] usb 2-1.6: reset high-speed USB device number 5 using ehci-pci
[ 1073.866745] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 1073.919420] ata6: SATA link down (SStatus 0 SControl 300)
[ 1073.919465] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1073.919781] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1073.919783] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1073.920171] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1073.920173] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1073.920303] ata1.00: configured for UDMA/133
[ 1073.927327] ata5: SATA link down (SStatus 0 SControl 300)
[ 1073.975553] usb 2-1.2: reset full-speed USB device number 4 using ehci-pci
[ 1074.580314] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 1078.437958] r8169 0000:04:00.0 enp4s0: link up
[ 1078.962532] ata2: link is slow to respond, please be patient (ready=0)
[ 1083.642528] ata2: COMRESET failed (errno=-16)
[ 1088.995561] ata2: link is slow to respond, please be patient (ready=0)
[ 1089.983533] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1089.983850] ata2.00: unexpected _GTF length (8)
[ 1089.984361] ata2.00: unexpected _GTF length (8)
[ 1089.984522] ata2.00: configured for UDMA/133
[ 1089.994917] usb 1-1.6:1.0: rebind failed: -517
[ 1089.994928] usb 1-1.6:1.1: rebind failed: -517
[ 1089.995323] OOM killer enabled.
[ 1089.995323] Restarting tasks ... done.
[ 1090.091073] video LNXVIDEO:01: Restoring backlight state
[ 1090.348527] PM: suspend exit


Without freeze:
Code:
[ 1208.931932] ACPI: Waking up from system sleep state S3
[ 1209.022949] ACPI: EC: interrupt unblocked
[ 1209.037313] ACPI: EC: event unblocked
[ 1209.038737] sd 0:0:0:0: [sda] Starting disk
[ 1209.038761] sd 1:0:0:0: [sdb] Starting disk
[ 1209.051518] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 1209.110975] r8169 0000:04:00.0 enp4s0: link down
[ 1209.260746] usb 2-1.6: reset high-speed USB device number 5 using ehci-pci
[ 1209.260763] usb 1-1.6: reset full-speed USB device number 3 using ehci-pci
[ 1209.287242] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 1209.352354] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1209.352425] ata5: SATA link down (SStatus 0 SControl 300)
[ 1209.352589] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1209.352591] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1209.352609] ata6: SATA link down (SStatus 0 SControl 300)
[ 1209.352805] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1209.352978] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1209.352980] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1209.353070] ata2.00: unexpected _GTF length (8)
[ 1209.353113] ata1.00: configured for UDMA/133
[ 1209.353411] ata2.00: unexpected _GTF length (8)
[ 1209.353465] ata2.00: configured for UDMA/133
[ 1209.402707] usb 2-1.2: reset full-speed USB device number 4 using ehci-pci
[ 1210.017976] psmouse serio4: synaptics: queried max coordinates: x [..5888], y [..4820]
[ 1210.170946] usb 1-1.6:1.0: rebind failed: -517
[ 1210.170955] usb 1-1.6:1.1: rebind failed: -517
[ 1210.171134] OOM killer enabled.
[ 1210.171134] Restarting tasks ... done.
[ 1210.189015] video LNXVIDEO:01: Restoring backlight state
[ 1210.324154] PM: suspend exit


Thanks in advance for replying.
Back to top
View user's profile Send private message
Yamakuzure
Advocate
Advocate


Joined: 21 Jun 2006
Posts: 2273
Location: Bardowick, Germany

PostPosted: Thu Dec 13, 2018 8:55 am    Post subject: Reply with quote

ata2 doesn't come up. That's probably /dev/sdb? When you have no freeze, your ata2 is up before ata1 is even finished, but in the freeze log you have:
Code:
[ 1078.962532] ata2: link is slow to respond, please be patient (ready=0)
[ 1083.642528] ata2: COMRESET failed (errno=-16)
[ 1088.995561] ata2: link is slow to respond, please be patient (ready=0)
[ 1089.983533] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
There is your 11 seconds freeze.

I'd check the drive with smartctl, and if it is a desktop, the cabling as well.

Just came to my mind: Is ata2 (/dev/sdb) a DVD writer or something like that? And if so, is it empty when you experience the freeze?
_________________
Important German:
  1. "Aha" - German reaction to pretend that you are really interested while giving no f*ck.
  2. "Tja" - German reaction to the apocalypse, nuclear war, an alien invasion or no bread in the house.
Back to top
View user's profile Send private message
ganywa
n00b
n00b


Joined: 13 Dec 2018
Posts: 4

PostPosted: Fri Dec 14, 2018 2:27 pm    Post subject: Reply with quote

The computer is a laptop, and originally there was a DVD / CD drive in the place of /dev/sdb, but currently there is an SSD (ADATA SX930 240 GB) there.
A long test and a short test run by smartctl both return PASSED for the drive (though both take only one minute).
There are some errors (starting on line 138) in the output of smartctl -s on -x /dev/sdb:
Code:
smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.65-gentoo-mobilpc] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ADATA SX930
Serial Number:    2H2720011327
LU WWN Device Id: 5 707c18 10052d3fc
Firmware Version: 6.8SE
User Capacity:    240,057,409,536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Dec 14 14:55:24 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (   32) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     (   1) minutes.
SCT capabilities:           (0x0039)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     -O-R--   100   100   000    -    0
  2 Throughput_Performance  P-S---   100   100   050    -    0
  3 Spin_Up_Time            POS---   100   100   050    -    0
  5 Reallocated_Sector_Ct   PO--C-   100   100   050    -    0
  7 Unknown_SSD_Attribute   PO-R--   100   100   050    -    0
  8 Unknown_SSD_Attribute   P-S---   100   100   050    -    0
  9 Power_On_Hours          -O--C-   100   100   000    -    3719
 10 Unknown_SSD_Attribute   PO--C-   100   100   050    -    0
 12 Power_Cycle_Count       -O--C-   100   100   000    -    1528
167 Unknown_Attribute       -O---K   100   100   000    -    0
168 Unknown_Attribute       -O--C-   100   100   000    -    26480
169 Unknown_Attribute       PO--C-   100   100   010    -    917507
170 Unknown_Attribute       PO--C-   100   100   010    -    0
173 Unknown_Attribute       -O--C-   193   193   000    -    4301652009
175 Program_Fail_Count_Chip PO--C-   065   100   010    -    0
180 Unused_Rsvd_Blk_Cnt_Tot PO--CK   100   100   020    -    2050
192 Power-Off_Retract_Count -O--C-   100   100   000    -    317
194 Temperature_Celsius     -O---K   071   071   030    -    29 (Min/Max 28/29)
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
231 Temperature_Celsius     PO--CK   099   099   005    -    1
233 Media_Wearout_Indicator -O--CK   100   100   000    -    24527043584
234 Unknown_Attribute       -O--CK   100   100   000    -    37082575680
240 Unknown_SSD_Attribute   PO--C-   100   100   050    -    0
241 Total_LBAs_Written      -O--CK   100   100   000    -    5972852596
242 Total_LBAs_Read         -O--CK   100   100   000    -    5489074072
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O     51  Comprehensive SMART error log
0x03       GPL     R/O     64  Ext. Comprehensive SMART error log
0x04       GPL,SL  R/O      8  Device Statistics log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x30       GPL,SL  R/O      9  IDENTIFY DEVICE data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 23722 (device log contains only the most recent 256 errors)
   CR     = Command Register
   FEATR  = Features Register
   COUNT  = Count (was: Sector Count) Register
   LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
   LH     = LBA High (was: Cylinder High) Register    ]   LBA
   LM     = LBA Mid (was: Cylinder Low) Register      ] Register
   LL     = LBA Low (was: Sector Number) Register     ]
   DV     = Device (was: Device/Head) Register
   DC     = Device Control Register
   ER     = Error register
   ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 23722 [169] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 11 03 d4 b0 e0 00  Error:

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

Error 23721 [168] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 11 03 d4 b0 e0 00  Error:

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

Error 23720 [167] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 11 03 d4 b0 e0 00  Error:

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

Error 23719 [166] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 11 03 d4 b0 e0 00  Error:

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

Error 23718 [165] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 11 03 d4 b0 e0 00  Error:

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

Error 23717 [164] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 11 03 d4 b0 e0 00  Error:

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

Error 23716 [163] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 11 03 d4 b0 e0 00  Error:

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

Error 23715 [162] occurred at disk power-on lifetime: 2977 hours (124 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  40 -- 51 00 00 00 00 11 03 d4 b0 e0 00  Error:

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3719         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       1 (0x0001)
SCT Support Level:                   0
Device State:                        Active (0)
Current Temperature:                  0 Celsius
Power Cycle Max Temperature:          0 Celsius
Lifetime    Max Temperature:          0 Celsius

SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:     -127/127 Celsius
Min/Max Temperature Limit:           -127/127 Celsius
Temperature History Size (Index):    478 (308)

Index    Estimated Time   Temperature Celsius
 309    2018-12-14 06:58    30  ***********
 ...    ..(  3 skipped).    ..  ***********
 313    2018-12-14 07:02    30  ***********
 314    2018-12-14 07:03    31  ************
 ...    ..(  8 skipped).    ..  ************
 323    2018-12-14 07:12    31  ************
 324    2018-12-14 07:13    32  *************
 ...    ..( 12 skipped).    ..  *************
 337    2018-12-14 07:26    32  *************
 338    2018-12-14 07:27    33  **************
 339    2018-12-14 07:28    32  *************
 340    2018-12-14 07:29    33  **************
 ...    ..( 15 skipped).    ..  **************
 356    2018-12-14 07:45    33  **************
 357    2018-12-14 07:46    34  ***************
 358    2018-12-14 07:47    33  **************
 ...    ..(  5 skipped).    ..  **************
 364    2018-12-14 07:53    33  **************
 365    2018-12-14 07:54    34  ***************
 366    2018-12-14 07:55    34  ***************
 367    2018-12-14 07:56    34  ***************
 368    2018-12-14 07:57    33  **************
 ...    ..(  2 skipped).    ..  **************
 371    2018-12-14 08:00    33  **************
 372    2018-12-14 08:01    34  ***************
 ...    ..(  6 skipped).    ..  ***************
 379    2018-12-14 08:08    34  ***************
 380    2018-12-14 08:09    35  ****************
 381    2018-12-14 08:10    35  ****************
 382    2018-12-14 08:11    36  *****************
 ...    ..(  4 skipped).    ..  *****************
 387    2018-12-14 08:16    36  *****************
 388    2018-12-14 08:17    37  ******************
 389    2018-12-14 08:18    36  *****************
 390    2018-12-14 08:19    35  ****************
 ...    ..(  4 skipped).    ..  ****************
 395    2018-12-14 08:24    35  ****************
 396    2018-12-14 08:25     ?  -
 397    2018-12-14 08:26     ?  -
 398    2018-12-14 08:27    24  *****
 399    2018-12-14 08:28    27  ********
 400    2018-12-14 08:29    28  *********
 401    2018-12-14 08:30    30  ***********
 402    2018-12-14 08:31    28  *********
 403    2018-12-14 08:32    28  *********
 404    2018-12-14 08:33    29  **********
 405    2018-12-14 08:34    29  **********
 406    2018-12-14 08:35    27  ********
 407    2018-12-14 08:36    28  *********
 408    2018-12-14 08:37    28  *********
 409    2018-12-14 08:38    29  **********
 ...    ..(  2 skipped).    ..  **********
 412    2018-12-14 08:41    29  **********
 413    2018-12-14 08:42    30  ***********
 ...    ..(  3 skipped).    ..  ***********
 417    2018-12-14 08:46    30  ***********
 418    2018-12-14 08:47    31  ************
 ...    ..(  3 skipped).    ..  ************
 422    2018-12-14 08:51    31  ************
 423    2018-12-14 08:52    32  *************
 ...    ..(  2 skipped).    ..  *************
 426    2018-12-14 08:55    32  *************
 427    2018-12-14 08:56     ?  -
 ...    ..( 15 skipped).    ..  -
 443    2018-12-14 09:12     ?  -
 444    2018-12-14 09:13    28  *********
 445    2018-12-14 09:14    29  **********
 446    2018-12-14 09:15    32  *************
 447    2018-12-14 09:16    33  **************
 448    2018-12-14 09:17    34  ***************
 449    2018-12-14 09:18    34  ***************
 450    2018-12-14 09:19    34  ***************
 451    2018-12-14 09:20    35  ****************
 452    2018-12-14 09:21     ?  -
 453    2018-12-14 09:22    27  ********
 454    2018-12-14 09:23    27  ********
 455    2018-12-14 09:24    26  *******
 456    2018-12-14 09:25    26  *******
 457    2018-12-14 09:26    27  ********
 458    2018-12-14 09:27    27  ********
 459    2018-12-14 09:28    28  *********
 460    2018-12-14 09:29    28  *********
 461    2018-12-14 09:30    29  **********
 ...    ..(  2 skipped).    ..  **********
 464    2018-12-14 09:33    29  **********
 465    2018-12-14 09:34    30  ***********
 466    2018-12-14 09:35    30  ***********
 467    2018-12-14 09:36    31  ************
 468    2018-12-14 09:37    30  ***********
 ...    ..( 13 skipped).    ..  ***********
   4    2018-12-14 09:51    30  ***********
   5    2018-12-14 09:52    31  ************
   6    2018-12-14 09:53    32  *************
   7    2018-12-14 09:54    32  *************
   8    2018-12-14 09:55    33  **************
   9    2018-12-14 09:56    33  **************
  10    2018-12-14 09:57    33  **************
  11    2018-12-14 09:58    34  ***************
  12    2018-12-14 09:59    34  ***************
  13    2018-12-14 10:00    34  ***************
  14    2018-12-14 10:01    32  *************
  15    2018-12-14 10:02     ?  -
  16    2018-12-14 10:03    24  *****
  17    2018-12-14 10:04    27  ********
  18    2018-12-14 10:05    26  *******
  19    2018-12-14 10:06    27  ********
  20    2018-12-14 10:07    28  *********
 ...    ..(  2 skipped).    ..  *********
  23    2018-12-14 10:10    28  *********
  24    2018-12-14 10:11    29  **********
 ...    ..(  4 skipped).    ..  **********
  29    2018-12-14 10:16    29  **********
  30    2018-12-14 10:17    30  ***********
 ...    ..(  5 skipped).    ..  ***********
  36    2018-12-14 10:23    30  ***********
  37    2018-12-14 10:24    31  ************
 ...    ..( 10 skipped).    ..  ************
  48    2018-12-14 10:35    31  ************
  49    2018-12-14 10:36    30  ***********
  50    2018-12-14 10:37     ?  -
 ...    ..( 10 skipped).    ..  -
  61    2018-12-14 10:48     ?  -
  62    2018-12-14 10:49    30  ***********
  63    2018-12-14 10:50    30  ***********
  64    2018-12-14 10:51    30  ***********
  65    2018-12-14 10:52    31  ************
  66    2018-12-14 10:53    30  ***********
 ...    ..(  2 skipped).    ..  ***********
  69    2018-12-14 10:56    30  ***********
  70    2018-12-14 10:57    31  ************
 ...    ..(  8 skipped).    ..  ************
  79    2018-12-14 11:06    31  ************
  80    2018-12-14 11:07    32  *************
 ...    ..( 10 skipped).    ..  *************
  91    2018-12-14 11:18    32  *************
  92    2018-12-14 11:19    31  ************
  93    2018-12-14 11:20    32  *************
 ...    ..(  6 skipped).    ..  *************
 100    2018-12-14 11:27    32  *************
 101    2018-12-14 11:28    33  **************
 ...    ..( 10 skipped).    ..  **************
 112    2018-12-14 11:39    33  **************
 113    2018-12-14 11:40    34  ***************
 114    2018-12-14 11:41    34  ***************
 115    2018-12-14 11:42    35  ****************
 116    2018-12-14 11:43    35  ****************
 117    2018-12-14 11:44    35  ****************
 118    2018-12-14 11:45    36  *****************
 ...    ..(  3 skipped).    ..  *****************
 122    2018-12-14 11:49    36  *****************
 123    2018-12-14 11:50    37  ******************
 ...    ..(  8 skipped).    ..  ******************
 132    2018-12-14 11:59    37  ******************
 133    2018-12-14 12:00    38  *******************
 ...    ..(  2 skipped).    ..  *******************
 136    2018-12-14 12:03    38  *******************
 137    2018-12-14 12:04    35  ****************
 138    2018-12-14 12:05    35  ****************
 139    2018-12-14 12:06    35  ****************
 140    2018-12-14 12:07    30  ***********
 141    2018-12-14 12:08    31  ************
 ...    ..(  3 skipped).    ..  ************
 145    2018-12-14 12:12    31  ************
 146    2018-12-14 12:13     ?  -
 147    2018-12-14 12:14    23  ****
 148    2018-12-14 12:15    24  *****
 149    2018-12-14 12:16    25  ******
 150    2018-12-14 12:17    29  **********
 151    2018-12-14 12:18    30  ***********
 ...    ..(  3 skipped).    ..  ***********
 155    2018-12-14 12:22    30  ***********
 156    2018-12-14 12:23     ?  -
 ...    ..( 14 skipped).    ..  -
 171    2018-12-14 12:38     ?  -
 172    2018-12-14 12:39    33  **************
 173    2018-12-14 12:40    33  **************
 174    2018-12-14 12:41    33  **************
 175    2018-12-14 12:42    34  ***************
 ...    ..(  4 skipped).    ..  ***************
 180    2018-12-14 12:47    34  ***************
 181    2018-12-14 12:48    32  *************
 182    2018-12-14 12:49    32  *************
 183    2018-12-14 12:50    33  **************
 184    2018-12-14 12:51    33  **************
 185    2018-12-14 12:52    34  ***************
 186    2018-12-14 12:53    34  ***************
 187    2018-12-14 12:54    34  ***************
 188    2018-12-14 12:55    35  ****************
 ...    ..(  7 skipped).    ..  ****************
 196    2018-12-14 13:03    35  ****************
 197    2018-12-14 13:04    34  ***************
 ...    ..( 10 skipped).    ..  ***************
 208    2018-12-14 13:15    34  ***************
 209    2018-12-14 13:16    33  **************
 210    2018-12-14 13:17    33  **************
 211    2018-12-14 13:18    33  **************
 212    2018-12-14 13:19    32  *************
 213    2018-12-14 13:20     ?  -
 ...    ..(  7 skipped).    ..  -
 221    2018-12-14 13:28     ?  -
 222    2018-12-14 13:29    26  *******
 ...    ..(  3 skipped).    ..  *******
 226    2018-12-14 13:33    26  *******
 227    2018-12-14 13:34    27  ********
 ...    ..(  3 skipped).    ..  ********
 231    2018-12-14 13:38    27  ********
 232    2018-12-14 13:39    28  *********
 ...    ..(  2 skipped).    ..  *********
 235    2018-12-14 13:42    28  *********
 236    2018-12-14 13:43    29  **********
 ...    ..(  6 skipped).    ..  **********
 243    2018-12-14 13:50    29  **********
 244    2018-12-14 13:51    30  ***********
 245    2018-12-14 13:52    30  ***********
 246    2018-12-14 13:53     ?  -
 247    2018-12-14 13:54    21  **
 248    2018-12-14 13:55    23  ****
 249    2018-12-14 13:56    25  ******
 250    2018-12-14 13:57    27  ********
 251    2018-12-14 13:58    28  *********
 252    2018-12-14 13:59    29  **********
 253    2018-12-14 14:00    23  ****
 254    2018-12-14 14:01    23  ****
 255    2018-12-14 14:02    24  *****
 256    2018-12-14 14:03    24  *****
 257    2018-12-14 14:04    25  ******
 258    2018-12-14 14:05    25  ******
 259    2018-12-14 14:06    26  *******
 ...    ..(  3 skipped).    ..  *******
 263    2018-12-14 14:10    26  *******
 264    2018-12-14 14:11    27  ********
 ...    ..(  2 skipped).    ..  ********
 267    2018-12-14 14:14    27  ********
 268    2018-12-14 14:15    26  *******
 269    2018-12-14 14:16    25  ******
 ...    ..(  6 skipped).    ..  ******
 276    2018-12-14 14:23    25  ******
 277    2018-12-14 14:24    26  *******
 ...    ..( 16 skipped).    ..  *******
 294    2018-12-14 14:41    26  *******
 295    2018-12-14 14:42    27  ********
 296    2018-12-14 14:43    28  *********
 ...    ..(  4 skipped).    ..  *********
 301    2018-12-14 14:48    28  *********
 302    2018-12-14 14:49     ?  -
 ...    ..(  2 skipped).    ..  -
 305    2018-12-14 14:52     ?  -
 306    2018-12-14 14:53    28  *********
 307    2018-12-14 14:54    28  *********
 308    2018-12-14 14:55    29  **********

SCT Error Recovery Control:
           Read:     70 (7.0 seconds)
          Write:     70 (7.0 seconds)

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 2) ==
0x01  0x008  4            1528  ---  Lifetime Power-On Resets
0x01  0x018  6      5972852596  ---  Logical Sectors Written
0x01  0x020  6        40481632  ---  Number of Write Commands
0x01  0x028  6      5489074072  ---  Logical Sectors Read
0x01  0x030  6        86245425  ---  Number of Read Commands
0x01  0x038  6     13388400000  ---  Date and Time TimeStamp
0x07  =====  =               =  ===  == Solid State Device Statistics (rev 1) ==
0x07  0x008  1               4  N--  Percentage Used Endurance Indicator
                                |||_ C monitored condition met
                                ||__ D supports DSN
                                |___ N normalized value

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2        26480  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  4            0  Transition from drive PhyRdy to drive PhyNRdy
0x000a  4         5315  Device-to-host register FISes sent due to a COMRESET
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC
Back to top
View user's profile Send private message
ganywa
n00b
n00b


Joined: 13 Dec 2018
Posts: 4

PostPosted: Wed Jan 23, 2019 2:29 am    Post subject: Solved Reply with quote

It seems that the SSD was faulty as I changed it to another one, and I haven't encountered any freezes yet.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum