genkernel error

[boerns]

Hi,

I did not update the kernel for a long time. I used my old configs and settings and want to switch from 3.18 -> 4.14

When I let genkernel run linke this:

MDADM="yes"
MDADM_CONFIG="/etc/mdadm.conf"
E2FSPROGS="yes"
DISKLABEL="yes"
OLDCONFIG="yes"
MENUCONFIG="no"
GCONFIG="no"
NCONFIG="no"
XCONFIG="no"
CLEAN="yes"
MRPROPER="yes"
MOUNTBOOT="yes"
SAVE_CONFIG="yes"
USECOLOR="yes"
MICROCODE="yes"
DMRAID="yes"
SSH="yes"
BUSYBOX="yes"
BOOTDIR="/boot"
GK_SHARE="${GK_SHARE:-/usr/share/genkernel}"
CACHE_DIR="/var/cache/genkernel"
DISTDIR="${GK_SHARE}/distfiles"
LOGFILE="/var/log/genkernel.log"
LOGLEVEL=1
DEFAULT_KERNEL_SOURCE="/usr/src/linux"
KNAME="genkernel"
RAMDISKMODULES="0"



I see finally these errors:

* Gentoo Linux Genkernel; Version 3.5.3.3
* Running with options: all --lvm --mdadm --dmraid --kernel-config=/boot/config-4.14.91

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
* Linux Kernel 4.14.91-gentoo for x86_64...
* .. with config file /boot/config-4.14.91
* kernel: Using config from /boot/config-4.14.91
* kernel: >> Running mrproper...
* >> Running oldconfig...
* kernel: >> Cleaning...
* >> Compiling 4.14.91-gentoo bzImage...
* >> Not installing firmware as requested by configuration FIRMWARE_INSTALL=no...
* >> Compiling 4.14.91-gentoo modules...
* >> Installing 4.14.91-gentoo modules (and stripping)
* >> Generating module dependency data...
* Copying config for successful build to /etc/kernels/kernel-config-x86_64-4.14.91-gentoo
* busybox: >> Applying patches...
patching file console-tools/openvt.c
Hunk #1 succeeded at 147 (offset 23 lines).
* - 1.18.1-openvt.diff
patching file modutils/modprobe.c
Hunk #1 succeeded at 444 (offset 31 lines).
Hunk #2 succeeded at 492 (offset 32 lines).
* - busybox-1.20.2-modprobe.patch
patching file util-linux/mdStart.c
* - busybox-1.26.0-mdstart.patch
patching file libbb/u_signal_names.c
Hunk #1 succeeded at 76 (offset 10 lines).
Hunk #2 succeeded at 100 (offset 10 lines).
* - busybox-1.7.4-signal-hack.patch
* busybox: >> Configuring...
* busybox: >> Compiling...
* busybox: >> Copying to cache...
* initramfs: >> Initializing...
* >> Appending devices cpio data...
* >> Appending base_layout cpio data...
* >> Appending auxilary cpio data...
* >> Copying keymaps
* >> Appending busybox cpio data...
* >> Appending e2fsprogs cpio data...
Traceback (most recent call last):
File "/usr/bin/lddtree", line 53, in <module>
from elftools.elf.elffile import ELFFile
ImportError: No module named 'elftools'
* >> Appending lvm cpio data...
* LVM: Adding support (compiling binaries)...
* lvm: >> Patching ...
* lvm: >> Applying patches...
patching file configure.in
Hunk #1 succeeded at 32 (offset 1 line).
Hunk #2 succeeded at 2129 (offset 119 lines).
patching file daemons/dmeventd/Makefile.in
Hunk #1 succeeded at 66 (offset -1 lines).
patching file make.tmpl.in
Hunk #1 succeeded at 58 (offset 9 lines).
patching file tools/Makefile.in
Hunk #1 succeeded at 133 (offset 4 lines).
Hunk #2 succeeded at 160 (offset 14 lines).
* - lvm2-2.02.139-dynamic-static-ldflags.patch
* lvm: >> Autoconf ...
* lvm: >> Configuring...
* lvm: >> Compiling...
* lvm: >> Installing to DESTDIR...
* >> Copying to bincache...
* >> Appending dmraid cpio data...
* DMRAID: Adding support (compiling binaries)...
* lvm: >> Using cache
* dmraid: >> No patches found in /usr/share/genkernel/patches/dmraid/1.0.0.rc16-3 ...
* dmraid: >> Configuring...
* dmraid: >> Compiling...
* ERROR: Failed to compile the "" target...
*
* -- Grepping log... --
*
* CPUSTR arch/x86/boot/cpustr.h
* CC arch/x86/boot/cpu.o
* MKPIGGY arch/x86/boot/compressed/piggy.S
* AS arch/x86/boot/compressed/piggy.o
* LD arch/x86/boot/compressed/vmlinux
*ld: arch/x86/boot/compressed/head_64.o: warning: relocation in read-only section `.head.text'
*ld: warning: creating a DT_TEXTREL in object.
*--
* pipe(pipefd);
* ^~~~~~~~~~~~
* HOSTCC scripts/kconfig/zconf.tab.o
* HOSTLD scripts/kconfig/conf
*scripts/kconfig/conf -o Config.in
*.config:4:warning: trying to assign nonexistent symbol ASH_BUILTIN_ECHO
*.config:5:warning: trying to assign nonexistent symbol ASH_BUILTIN_PRINTF
*.config:6:warning: trying to assign nonexistent symbol ASH_BUILTIN_TEST
*.config:7:warning: trying to assign nonexistent symbol FEATURE_AUTOWIDTH
*.config:8:warning: trying to assign nonexistent symbol FEATURE_BASH_IS_NONE
*.config:9:warning: trying to assign nonexistent symbol FEATURE_EXTRA_QUIET
*.config:10:warning: trying to assign nonexistent symbol FEATURE_FTP_WRITE
*.config:11:warning: trying to assign nonexistent symbol FEATURE_GREP_EGREP_ALIAS
*.config:12:warning: trying to assign nonexistent symbol FEATURE_GREP_FGREP_ALIAS
*.config:13:warning: trying to assign nonexistent symbol FEATURE_INITRD
*.config:14:warning: trying to assign nonexistent symbol FEATURE_IP_SHORT_FORMS
*.config:15:warning: trying to assign nonexistent symbol FEATURE_SH_IS_ASH
*.config:16:warning: trying to assign nonexistent symbol FEATURE_SYSTEMD
*.config:17:warning: trying to assign nonexistent symbol FEATURE_TRACEROUTE_SOURCE_ROUTE
*.config:18:warning: trying to assign nonexistent symbol FEATURE_USE_TERMIOS
*.config:19:warning: trying to assign nonexistent symbol FEATURE_VI_OPTIMIZE_CURSOR
*.config:20:warning: trying to assign nonexistent symbol SH_MATH_SUPPORT_64
*.config:21:warning: trying to assign nonexistent symbol SH_MATH_SUPPORT
*.config:22:warning: trying to assign nonexistent symbol SWAPONOFF
*--
* Debugging Options
*
*Build BusyBox with extra Debugging symbols (DEBUG) [N/y/?] n
*Enable runtime sanitizers (ASAN/LSAN/USAN/etc...) (DEBUG_SANITIZE) [N/y/?] n
*Build unit tests (UNIT_TEST) [N/y/?] n
*Abort compilation on any warning (WERROR) [N/y/?] n
*--
* Allow zero-width Unicode characters on output (UNICODE_COMBINING_WCHARS) [N/y/?] n
* Allow wide Unicode characters on output (UNICODE_WIDE_WCHARS) [N/y/?] n
* Bidirectional character-aware line input (UNICODE_BIDI_SUPPORT) [N/y/?] n
* Make it possible to enter sequences of chars which are not Unicode (UNICODE_PRESERVE_BROKEN) [N/y/?] n
*Non-POSIX, but safer, copying to special nodes (FEATURE_NON_POSIX_CP) [Y/n/?] y
*Give more precise messages when copy fails (cp, mv etc) (FEATURE_VERBOSE_CP_MESSAGE) [N/y/?] n
*Use sendfile system call (FEATURE_USE_SENDFILE) [Y/n/?] y
*Copy buffer size, in kilobytes (FEATURE_COPYBUF_KB) [4] 4
*Skip rootfs in mount table (FEATURE_SKIP_ROOTFS) [Y/n/?] y
*Use clock_gettime(CLOCK_MONOTONIC) syscall (MONOTONIC_SYSCALL) [Y/n/?] y
*Use ioctl names rather than hex values in error messages (IOCTL_HEX2STR_ERROR) [Y/n/?] y
*--
* gcc -Wp,-MD,util-linux/.mdev.o.d -std=gnu99 -Iinclude -Ilibbb -include include/autoconf.h -D_GNU_SOURCE -DNDEBUG -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D"BB_VER=KBUILD_STR(1.27.2)" -DBB_BT=AUTOCONF_TIMESTAMP -Wall -Wshadow -Wwrite-strings -Wundef -Wstrict-prototypes -Wunused -Wunused-parameter -Wunused-function -Wunused-value -Wmissing-prototypes -Wmissing-declarations -Wno-format-security -Wdeclaration-after-statement -Wold-style-definition -fno-builtin-strlen -finline-limit=0 -fomit-frame-pointer -ffunction-sections -fdata-sections -fno-guess-branch-probability -funsigned-char -static-libgcc -falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1 -fno-unwind-tables -fno-asynchronous-unwind-tables -fno-builtin-printf -Os -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(mdev)" -D"KBUILD_MODNAME=KBUILD_STR(mdev)" -c -o util-linux/mdev.o util-linux/mdev.c
*util-linux/mdStart.c:65:4: Warnung: Implizite Deklaration der Funktion »close« [-Wimplicit-function-declaration]
* close(fd);
* ^~~~~
*util-linux/mdStart.c:68:4: Warnung: Implizite Deklaration der Funktion »printf« [-Wimplicit-function-declaration]
* printf("Error: Failed to open %s!\n", argv[i]);
*--
*echo $DEPLIST | fmt -1 | sed 's/ //g;s/\(.*\)/\1:/' >> device/dev-cache.d; \
*[ -s device/dev-cache.d ] || rm -f device/dev-cache.d
*make -C tools device-mapper
*make[1]: Verzeichnis „/var/tmp/genkernel/18315.5873.19400.30904/LVM2.2.02.173/tools“ wird betreten
*ln -s -f command.c man-generator.c
*set -o pipefail && \
*--
* echo "/* Do not edit. This file is generated by the Makefile. */" && \
* echo -en "const char _command_input[] =\n\n\"" && \
* /bin/grep -E -v '^#|\-\-\-|^$' ./command-lines.in | gawk 'BEGIN {ORS = "\\n\"\n\""} //' && \
* echo "\\n\";" \
*) > command-lines-input.h
*set -o pipefail && \
*( cat ../tools/license.inc && \
* echo "/* Do not edit. This file is generated by the Makefile. */" && \
* echo -n "#define COMMAND_COUNT " && \
* /bin/grep '^ID:' ./command-lines.in | /usr/bin/wc -l \
*) > command-count.h
*set -o pipefail && \
*--
* Running with options: all --lvm --mdadm --dmraid --kernel-config=/boot/config-4.14.91
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
*
* ERROR: Failed to compile the "" target...
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*
update grub.conf


Because it is really long time ago when I last did this I do not know what is the root cause for this failure.

Would be glad for any hint.

Alex

[fedeliallalinea]

The error seems

[boerns]

holodeck ~/bin # emerge -pvq app-misc/pax-utils
[ebuild R ] app-misc/pax-utils-1.2.3 USE="python seccomp -caps -debug"

* IMPORTANT: 46 news items need reading for repository 'gentoo'.
* Use eselect news read to view new items.

holodeck ~/bin # python --version
Python 3.4.8

[fedeliallalinea]

You can also post

[boerns]

holodeck /etc/portage # emerge -pvq dev-python/pyelftools
[ebuild R ] dev-python/pyelftools-0.24 USE="-examples" PYTHON_TARGETS="python2_7 python3_5 python3_6 -python3_4"

[boerns]

I switched to python 3.5 and were not aware that 3.4 is still active. thanks for debugging this.

[boerns]

still same error

gere the end of genkernel.log:

FILE=`echo dmraid.d | /bin/sed 's/\\//\\\\\\//g;s/\\.d//g'`; \
DEPS=`echo Makefile ../make.tmpl ../tools/VERSION ../include/config.h | /bin/sed -e 's/\\//\\\\\\//g'`; \
gcc -MM -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/16023.19493.16055.22946/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 -o dmraid.d dmraid.c; \
/bin/sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" dmraid.d; \
[ -s dmraid.d ] || rm -f dmraid.d
gcc -o dmraid.o -c -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/16023.19493.16055.22946/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 dmraid.c
gcc -o commands.o -c -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/16023.19493.16055.22946/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 commands.c
gcc -o toollib.o -c -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/16023.19493.16055.22946/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 toollib.c
gcc -o dmraid dmraid.o commands.o toollib.o -Wl,--no-as-needed -static -L../lib -ldmraid -ldevmapper -lm -lrt -lpthread
/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../x86_64-pc-linux-gnu/bin/ld: -ldevmapper kann nicht gefunden werden
collect2: Fehler: ld gab 1 als Ende-Status zurück
make[1]: *** [Makefile:71: dmraid] Fehler 1
make[1]: Verzeichnis „/var/tmp/genkernel/16023.19493.16055.22946/dmraid/1.0.0.rc16-3/dmraid/tools“ wird verlassen
make: *** [make.tmpl:120: tools] Fehler 2
* Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
* Running with options: all --lvm --mdadm --dmraid --kernel-config=/boot/config-4.14.91
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* ERROR: Failed to compile the "" target...
*
* -- Grepping log... --
*
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!
*

what is this devmapper?

[fedeliallalinea]

https://forums.gentoo.org/viewtopic-t-1083698-start-0.html
_________________
Questions are guaranteed in life; Answers aren't.

[boerns]

Hi,

I set static-libs for these packages and reemerged them:

I did reemerge eudev, dmraid, pax-utils, gcc, lvm2,

but it does not help.

I have in genkernel log these errors and do not know how to fix that

FILE=`echo toollib.d | /bin/sed 's/\\//\\\\\\//g;s/\\.d//g'`; \
DEPS=`echo Makefile ../make.tmpl ../tools/VERSION ../include/config.h | /bin/sed -e 's/\\//\\\\\\//g'`; \
gcc -MM -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/12806.26436.32260.6961/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 -o toollib.d toollib.c; \
/bin/sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" toollib.d; \
[ -s toollib.d ] || rm -f toollib.d
/bin/mkdir -p ./; \
set -e; \
FILE=`echo commands.d | /bin/sed 's/\\//\\\\\\//g;s/\\.d//g'`; \
DEPS=`echo Makefile ../make.tmpl ../tools/VERSION ../include/config.h | /bin/sed -e 's/\\//\\\\\\//g'`; \
gcc -MM -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/12806.26436.32260.6961/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 -o commands.d commands.c; \
/bin/sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" commands.d; \
[ -s commands.d ] || rm -f commands.d
/bin/mkdir -p ./; \
set -e; \
FILE=`echo dmraid.d | /bin/sed 's/\\//\\\\\\//g;s/\\.d//g'`; \
DEPS=`echo Makefile ../make.tmpl ../tools/VERSION ../include/config.h | /bin/sed -e 's/\\//\\\\\\//g'`; \
gcc -MM -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/12806.26436.32260.6961/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 -o dmraid.d dmraid.c; \
/bin/sed -i "s/\(.*\)\.o[ :]*/$FILE.o $FILE.d $FILE.pot: $DEPS /g" dmraid.d; \
[ -s dmraid.d ] || rm -f dmraid.d
gcc -o dmraid.o -c -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/12806.26436.32260.6961/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 dmraid.c
gcc -o commands.o -c -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/12806.26436.32260.6961/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 commands.c
gcc -o toollib.o -c -I -I. -I../include -I../lib -include ../include/config.h -I/var/tmp/genkernel/12806.26436.32260.6961/lvm/include -O2 -fPIC -Wall -Wundef -Wcast-align -Wwrite-strings -Winline -O2 toollib.c
gcc -o dmraid dmraid.o commands.o toollib.o -Wl,--no-as-needed -static -L../lib -ldmraid -ldevmapper -lm -lrt -lpthread
/usr/lib/gcc/x86_64-pc-linux-gnu/7.3.0/../../../../lib64/libdevmapper.a(libdm-common.o): In Funktion »_check_udev_sync_requirements_once«:
(.text+0xb21): Warnung: undefinierter Verweis auf »udev_new«
(.text+0xb35): Warnung: undefinierter Verweis auf »udev_queue_new«
(.text+0xb49): Warnung: undefinierter Verweis auf »udev_queue_get_udev_is_active«
(.text+0xb5c): Warnung: undefinierter Verweis auf »udev_queue_unref«
(.text+0xb64): Warnung: undefinierter Verweis auf »udev_unref«
(.text+0xcdc): Warnung: undefinierter Verweis auf »udev_unref«
(.text+0xdd1): Warnung: undefinierter Verweis auf »udev_queue_unref«
(.text+0xdd9): Warnung: undefinierter Verweis auf »udev_unref«
collect2: Fehler: ld gab 1 als Ende-Status zurück
make[1]: *** [Makefile:71: dmraid] Fehler 1
make[1]: Verzeichnis „/var/tmp/genkernel/12806.26436.32260.6961/dmraid/1.0.0.rc16-3/dmraid/tools“ wird verlassen
make: *** [make.tmpl:120: tools] Fehler 2
* Gentoo Linux Genkernel; Version 3.5.3.3^[[0m
* Running with options: all --lvm --mdadm --dmraid --kernel-config=/boot/config-4.14.91
* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..

* ERROR: Failed to compile the "" target...
*
* -- Grepping log... --
*
*
* -- End log... --
*
* Please consult /var/log/genkernel.log for more information and any
* errors that were reported above.
*
* Report any genkernel bugs to bugs.gentoo.org and
* assign your bug to genkernel@gentoo.org. Please include
* as much information as you can in your bug report; attaching
* /var/log/genkernel.log so that your issue can be dealt with effectively.
*
* Please do *not* report compilation failures as genkernel bugs!



Anybody an Ideo how to solve that?

[boerns]

[boerns]

Ok,

I seem to find a bug. I had to copy the patches for dmraid to help genkernel to find them.

Before I saw this:

holodeck ~/bin # sh do_kernel_4.14.91
* Gentoo Linux Genkernel; Version 3.5.3.3
* Running with options: all --lvm --mdadm --dmraid --kernel-config=/boot/config-4.14.91

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
* Linux Kernel 4.14.91-gentoo for x86_64...
* .. with config file /boot/config-4.14.91
Dateien /usr/src/linux/.config und /boot/config-4.14.91 sind verschieden.
* Previous config backed up to .config--2019-01-02--05-46-13.bak
* kernel: Using config from /boot/config-4.14.91
* kernel: >> Running mrproper...
* >> Running oldconfig...
* kernel: >> Cleaning...
* >> Compiling 4.14.91-gentoo bzImage...
* >> Not installing firmware as requested by configuration FIRMWARE_INSTALL=no...
* >> Compiling 4.14.91-gentoo modules...
* >> Installing 4.14.91-gentoo modules (and stripping)
* >> Generating module dependency data...
* Copying config for successful build to /etc/kernels/kernel-config-x86_64-4.14.91-gentoo
* busybox: >> Using cache
* initramfs: >> Initializing...
* >> Appending devices cpio data...
* >> Appending base_layout cpio data...
* >> Appending auxilary cpio data...
* >> Copying keymaps
* >> Appending busybox cpio data...
* >> Appending e2fsprogs cpio data...
* >> Appending lvm cpio data...
* LVM: Adding support (compiling binaries)...
* lvm: >> Using cache
* >> Appending dmraid cpio data...
* DMRAID: Adding support (compiling binaries)...
* lvm: >> Using cache
* dmraid: >> No patches found in /usr/share/genkernel/patches/dmraid/1.0.0.rc16-3 ...
* dmraid: >> Configuring...
* dmraid: >> Compiling...
* ERROR: Failed to compile the "" target...
*
* -- Grepping log... --


Now I see this:

holodeck ~/bin # sh do_kernel_4.14.91
* Gentoo Linux Genkernel; Version 3.5.3.3
* Running with options: all --lvm --mdadm --dmraid --kernel-config=/boot/config-4.14.91

* Using genkernel.conf from /etc/genkernel.conf
* Sourcing arch-specific config.sh from /usr/share/genkernel/arch/x86_64/config.sh ..
* Sourcing arch-specific modules_load from /usr/share/genkernel/arch/x86_64/modules_load ..
* Linux Kernel 4.14.91-gentoo for x86_64...
* .. with config file /boot/config-4.14.91
Dateien /usr/src/linux/.config und /boot/config-4.14.91 sind verschieden.
* Previous config backed up to .config--2019-01-02--08-41-08.bak
* kernel: Using config from /boot/config-4.14.91
* kernel: >> Running mrproper...
* >> Running oldconfig...
* kernel: >> Cleaning...
* >> Compiling 4.14.91-gentoo bzImage...
* >> Not installing firmware as requested by configuration FIRMWARE_INSTALL=no...
* >> Compiling 4.14.91-gentoo modules...
* >> Installing 4.14.91-gentoo modules (and stripping)
* >> Generating module dependency data...
* Copying config for successful build to /etc/kernels/kernel-config-x86_64-4.14.91-gentoo
* busybox: >> Using cache
* initramfs: >> Initializing...
* >> Appending devices cpio data...
* >> Appending base_layout cpio data...
* >> Appending auxilary cpio data...
* >> Copying keymaps
* >> Appending busybox cpio data...
* >> Appending e2fsprogs cpio data...
* >> Appending lvm cpio data...
* LVM: Adding support (compiling binaries)...
* lvm: >> Using cache
* >> Appending dmraid cpio data...
* DMRAID: Adding support (compiling binaries)...
* lvm: >> Using cache
* >> Appending mdadm cpio data...
* MDADM: Adding support (compiling binaries)...
* MDADM: Using cache
* >> Appending dropbear cpio data...
cp: der Aufruf von stat für '/etc/dropbear/authorized_keys' ist nicht möglich: Datei oder Verzeichnis nicht gefunden
* initramfs: Not copying modules...
* >> Appending blkid cpio data...
* >> Appending modprobed cpio data...
* >> Appending linker cpio data...
* >> Deduping cpio...
* >> Compressing cpio data (.gz)...
* early-microcode: >> Preparing...
* >> adding GenuineIntel.bin
* >> adding AuthenticAMD.bin
* early-microcode: >> Creating cpio...
5150 Blöcke
* early-microcode: >> Prepending early-microcode to initramfs
*
* Kernel compiled successfully!
*
* Required Kernel Parameters:
* root=/dev/$ROOT
*
* Where $ROOT is the device node for your root partition as the
* one specified in /etc/fstab
*
* If you require Genkernel's hardware detection features; you MUST
* tell your bootloader to use the provided INITRAMFS file.

* WARNING... WARNING... WARNING...
* Additional kernel cmdline arguments that *may* be required to boot properly...
* add "dolvm" for lvm support
* add "dodmraid" for dmraid support
* add "domdadm" for RAID support
* or "dodmraid=<additional options>"
* With support for several ext* filesystems available, it may be needed to
* add "rootfstype=ext3" or "rootfstype=ext4" to the list of boot parameters.

* Do NOT report kernel bugs as genkernel bugs unless your bug
* is about the default genkernel configuration...
*
* Make sure you have the latest ~arch genkernel before reporting bugs.



Whis is what I did:

I copied the patches from
/usr/share/genkernel/patches/dmraid
to
/usr/share/genkernel/patches/dmraid/1.0.0.rc16-3

But not all could be applied!
Only these:

holodeck /usr/share/genkernel/patches/dmraid/1.0.0.rc16-3 # ls -al
insgesamt 24
drwxrwxr-x 2 root root 4096 2. Jan 08:37 .
drwxr-xr-x 3 root root 4096 2. Jan 08:05 ..
-rw-r--r-- 1 root root 629 2. Jan 08:06 dmraid-1.0.0.rc16-3-staticlink.patch
-rw-r--r-- 1 root root 283 2. Jan 08:37 dmraid-1.0.0_rc16-return-all-sets.patch
-rw-r--r-- 1 root root 3840 2. Jan 08:06 dmraid-1.0.0_rc16-static-build-fixes.patch
-rw-r--r-- 1 root root 531 2. Jan 08:06 dmraid-1.0.0_rc16-undo-p-rename.patch


Should I file a bug? Or did I while emerging dmraid, lvm2, genkernel, pax-utils etc. something wrong? I recompiled everything several times.

Alexander

[Marlo]