Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
How can I solved this problem,system don't start
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Installing Gentoo
View previous topic :: View next topic  
Author Message
wenzi
n00b
n00b


Joined: 18 Jan 2019
Posts: 2

PostPosted: Fri Jan 18, 2019 3:46 am    Post subject: How can I solved this problem,system don't start Reply with quote

when I finish the system installation at the first time and reboot ,but it stop at Run /init as init process,and anyone can tell me what shoud I do ,Thanks
Back to top
View user's profile Send private message
mvaterlaus
Apprentice
Apprentice


Joined: 01 Oct 2010
Posts: 202
Location: Switzerland

PostPosted: Fri Jan 18, 2019 3:16 pm    Post subject: Reply with quote

Hi,
this is not much information to for diagnosing your problem. It would be good, if you could give more information about your problem. But if i undestand you correctly, the boot process hangs after the kernel finished loading and the init process should begin to initialise disks and services. For the moment, i assume that you use openRC, the default init of gentoo. It could be, that your installation misses some devices, which are used by eudev/udev to initialise the /dev tree [1]. Try booting with a live CD and check if the devices are present in your installation (you need to mount the corresponding disks).


[1]https://forums.gentoo.org/viewtopic-p-6702573.html#6702573


Greetings.
_________________
For calming down your eyes or clearing your mind: www.patrickwehli.ch
Back to top
View user's profile Send private message
wenzi
n00b
n00b


Joined: 18 Jan 2019
Posts: 2

PostPosted: Sat Jan 19, 2019 6:09 am    Post subject: Reply with quote

mvaterlaus wrote:
Hi,
this is not much information to for diagnosing your problem. It would be good, if you could give more information about your problem. But if i undestand you correctly, the boot process hangs after the kernel finished loading and the init process should begin to initialise disks and services. For the moment, i assume that you use openRC, the default init of gentoo. It could be, that your installation misses some devices, which are used by eudev/udev to initialise the /dev tree [1]. Try booting with a live CD and check if the devices are present in your installation (you need to mount the corresponding disks).


[1]https://forums.gentoo.org/viewtopic-p-6702573.html#6702573


Greetings.

I don't know how to discribe ,I have try openrc systemd,but it's the same, and if set the gfxmod 1920x1080x32 ,actually,it does not support, it maybe work at 640x480 ,and it can get the user login ,but if set gfxmode 640x480,it still stop at here Run /init
Maybe it's the wrong of stage4?
Back to top
View user's profile Send private message
mvaterlaus
Apprentice
Apprentice


Joined: 01 Oct 2010
Posts: 202
Location: Switzerland

PostPosted: Tue Jan 29, 2019 12:27 pm    Post subject: Reply with quote

Sorry for not replying for this long time.

It seems, that you have specified an invalid resolution to grub. You can try the following:

  • Specify the resolution which gets you to a login promt.
  • Log in
  • Install hwinfo and run the following command (this should give you a list of supported resolutions):
    Code:
    hwinfo --framebuffer

  • Enter an appropriate resolution in your grub config and reboot to test.

You can get additional Info[1] on how to configure grub2 for your resolution.

[1]https://unix.stackexchange.com/questions/107479/how-do-you-pass-vga-vesa-modes-with-grub2
_________________
For calming down your eyes or clearing your mind: www.patrickwehli.ch
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Installing Gentoo All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum