Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Idle / no input after 10 mins freezes the whole system
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
tayirvadai
n00b
n00b


Joined: 15 Oct 2017
Posts: 26

PostPosted: Fri Dec 13, 2019 5:20 pm    Post subject: Idle / no input after 10 mins freezes the whole system Reply with quote

I recently updated my gentoo and for some reason xorg failed and i fixed it using the make.conf changes in video cards. Since then Xorg works fine. But if there is not input after 10 to 15 mins the screensaver or screen goes blank and any key after that brings back the last image before the black screen and no keys or mouse works. i am unable to do anything beyond that and i think it might have to do with Kernel ACPI. Any help in diagnosing this is appreciated. Here are my dmesg

I am using an AsusVivobook.

Code:

laptopGentoo /var/log # dmesg -l err,Warn
[    0.521019] ACPI BIOS Error (bug): Failure creating [\_GPE._L00], AE_ALREADY_EXISTS (20180810/dswload2-315)
[    0.521045] ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20180810/psobject-220)
[    0.521050] ACPI Error: Skip parsing opcode OpcodeName unavailable (20180810/psloop-540)
[    0.558940] Expanded resource Reserved due to conflict with AMD0020:01
[    1.666420] pci 0000:00:00.2: can't derive routing for PCI INT A
[    1.666425] pci 0000:00:00.2: PCI INT A: not connected
[    1.667894]  PPR NX GT IA GA PC GA_vAPIC
[    1.689311] tpm_crb MSFT0101:00: can't request region for resource [mem 0xdd758000-0xdd758fff]
[    1.689318] tpm_crb: probe of MSFT0101:00 failed with error -16
[    1.697566] ipmi_si: Unable to find any System Interface(s)
[    1.721225] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    2.729239] usb 1-1.3: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[    2.729242] usb 1-1.3: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[    3.237719] imm: Version 2.05 (for Linux 2.4.0)
[    3.346586] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    3.350473] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    3.425594] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.08-k.
[    3.443184] Emulex LightPulse Fibre Channel SCSI driver 12.0.0.6
[    3.443186] Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries.
[    3.567753] usb: port power management may be unreliable
[    6.417208] urandom_read: 5 callbacks suppressed
[    6.492147] Error: Driver 'pcspkr' is already registered, aborting...
[    6.523453] i2c_hid i2c-ELAN1300:00: i2c-ELAN1300:00 supply vdd not found, using dummy regulator
[    6.523485] i2c_hid i2c-ELAN1300:00: i2c-ELAN1300:00 supply vddl not found, using dummy regulator
[    6.676737] r8822be: module is from the staging directory, the quality is unknown, you have been warned.
[   23.736703] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

laptopGentoo /var/log # uname -a
Linux laptopGentoo 4.19.86-gentoo #1 SMP Fri Dec 13 08:55:44 EST 2019 x86_64 AMD A12-9720P RADEON R7, 12 COMPUTE CORES 4C+8G AuthenticAMD GNU/Linux
laptopGentoo /var/log #


_________________
Thanks
Tayirvadai
Back to top
View user's profile Send private message
tayirvadai
n00b
n00b


Joined: 15 Oct 2017
Posts: 26

PostPosted: Fri Dec 13, 2019 5:22 pm    Post subject: Reply with quote

Note that the same happens when Xorg is not started as well. When logging in without X after boot up, same problem occurs.
_________________
Thanks
Tayirvadai
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum