Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Instantly waking up from suspend .
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
daguq
n00b
n00b


Joined: 27 Oct 2019
Posts: 23

PostPosted: Wed Jan 29, 2020 4:56 am    Post subject: Instantly waking up from suspend . Reply with quote

I am trying to setup suspend to ram in my Gentoo installation . I have went through the wiki , and made the required changes .
When I run
Code:
s2ram
, it goes to suspend and then immediately resumes back in normal mode with the log message
Code:
KMS graphics driver is in use, skipping quirks.


My dmesg output is
Code:

[  504.752207] PM: suspend entry (deep)
[  504.757542] Filesystems sync: 0.005 seconds
[  504.757709] Freezing user space processes ... (elapsed 0.000 seconds) done.
[  504.758463] OOM killer disabled.
[  504.758463] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[  504.759450] printk: Suspending console(s) (use no_console_suspend to debug)
[  504.762885] e1000e: EEE TX LPI TIMER: 00000011
[  504.766433] sd 5:0:0:0: [sdc] Synchronizing SCSI cache
[  504.766452] sd 6:0:0:0: [sdd] Synchronizing SCSI cache
[  504.766518] sd 6:0:0:0: [sdd] Stopping disk
[  504.767305] sd 5:0:0:0: [sdc] Stopping disk
[  504.767428] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[  504.767445] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  504.767539] sd 2:0:0:0: [sda] Stopping disk
[  504.774751] sd 3:0:0:0: [sdb] Stopping disk
[  505.432113] ACPI: EC: interrupt blocked
[  505.456814] ACPI: Preparing to enter system sleep state S3
[  505.666514] ACPI: EC: event blocked
[  505.666516] ACPI: EC: EC stopped
[  505.666517] PM: Saving platform NVS memory
[  505.666573] Disabling non-boot CPUs ...
[  505.668126] smpboot: CPU 1 is now offline
[  505.670742] smpboot: CPU 2 is now offline
[  505.672922] smpboot: CPU 3 is now offline
[  505.676670] smpboot: CPU 4 is now offline
[  505.678094] smpboot: CPU 5 is now offline
[  505.679258] smpboot: CPU 6 is now offline
[  505.680508] smpboot: CPU 7 is now offline
[  505.682260] ACPI: Low-level resume complete
[  505.682307] ACPI: EC: EC started
[  505.682308] PM: Restoring platform NVS memory
[  505.682914] do_IRQ: 0.55 No irq handler for vector
[  505.682922] Enabling non-boot CPUs ...
[  505.682938] x86: Booting SMP configuration:
[  505.682939] smpboot: Booting Node 0 Processor 1 APIC 0x2
[  505.683408] CPU1 is up
[  505.683416] smpboot: Booting Node 0 Processor 2 APIC 0x4
[  505.683948] CPU2 is up
[  505.683956] smpboot: Booting Node 0 Processor 3 APIC 0x6
[  505.684389] CPU3 is up
[  505.684398] smpboot: Booting Node 0 Processor 4 APIC 0x1
[  505.684974] CPU4 is up
[  505.684983] smpboot: Booting Node 0 Processor 5 APIC 0x3
[  505.685419] CPU5 is up
[  505.685427] smpboot: Booting Node 0 Processor 6 APIC 0x5
[  505.685970] CPU6 is up
[  505.685978] smpboot: Booting Node 0 Processor 7 APIC 0x7
[  505.686421] CPU7 is up
[  505.688077] ACPI: Waking up from system sleep state S3
[  505.690340] ACPI: EC: interrupt unblocked
[  505.713882] ACPI: EC: event unblocked
[  505.714125] usb usb2: root hub lost power or was reset
[  505.714126] usb usb4: root hub lost power or was reset
[  505.720124] sd 2:0:0:0: [sda] Starting disk
[  505.720125] sd 3:0:0:0: [sdb] Starting disk
[  505.720126] sd 5:0:0:0: [sdc] Starting disk
[  505.720131] sd 6:0:0:0: [sdd] Starting disk
[  506.029587] ata8: SATA link down (SStatus 0 SControl 300)
[  506.085579] ata2: SATA link down (SStatus 4 SControl 300)
[  506.089595] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  506.093536] ata1: SATA link down (SStatus 4 SControl 300)
[  506.093624] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  506.093658] ata5: SATA link down (SStatus 4 SControl 300)
[  506.093840] ata6.00: supports DRM functions and may not be fully accessible
[  506.094466] ata6.00: disabling queued TRIM support
[  506.096008] ata6.00: supports DRM functions and may not be fully accessible
[  506.096517] ata6.00: disabling queued TRIM support
[  506.097818] ata6.00: configured for UDMA/133
[  506.108779] ata4.00: configured for UDMA/133
[  506.187581] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  506.193835] ata7.00: configured for UDMA/133
[  506.300569] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  506.322020] ata3.00: configured for UDMA/133
[  506.332748] OOM killer enabled.
[  506.332749] Restarting tasks ... done.
[  506.334108] PM: suspend exit
[  511.829247] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[  511.829254] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO


My video card and driver in use is
Code:

VGA compatible controller: NVIDIA Corporation GP104 [GeForce GTX 1080] (rev a1) (prog-if 00 [VGA controller])
   Subsystem: eVga.com. Corp. GP104 [GeForce GTX 1080]
   Flags: bus master, fast devsel, latency 0, IRQ 16
   Memory at de000000 (32-bit, non-prefetchable) [size=16M]
   Memory at c0000000 (64-bit, prefetchable) [size=256M]
   Memory at d0000000 (64-bit, prefetchable) [size=32M]
   I/O ports at e000 [size=128]
   Expansion ROM at 000c0000 [disabled] [size=128K]
   Capabilities: [60] Power Management version 3
   Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
   Capabilities: [78] Express Legacy Endpoint, MSI 00
   Capabilities: [100] Virtual Channel
   Capabilities: [250] Latency Tolerance Reporting
   Capabilities: [128] Power Budgeting <?>
   Capabilities: [420] Advanced Error Reporting
   Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
   Capabilities: [900] Secondary PCI Express
   Kernel driver in use: nouveau
   Kernel modules: nouveau


My kernel configuration is
Code:

CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
Back to top
View user's profile Send private message
daguq
n00b
n00b


Joined: 27 Oct 2019
Posts: 23

PostPosted: Wed Jan 29, 2020 9:26 am    Post subject: Reply with quote

bump . anyone ?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum