Joined: 16 Nov 2003
Location: Near Toronto
|Posted: Wed Feb 05, 2020 2:34 pm Post subject: nct6775 stopped working [SOLVED]
|Although I load module nct6775 and though sensors-detect
|Found `Nuvoton NCT6793D Super IO Sensors' Success!
(address 0x290, driver `nct6775')
on my ASUS Z170-K motherboard,
there are no fan speeds, temps or voltages from nct6775
Here is what sensors reports:
Adapter: ISA adapter
Package id 0: +32.0°C (high = +84.0°C, crit = +100.0°C)
Core 0: +27.0°C (high = +84.0°C, crit = +100.0°C)
Core 1: +29.0°C (high = +84.0°C, crit = +100.0°C)
Core 2: +28.0°C (high = +84.0°C, crit = +100.0°C)
Core 3: +26.0°C (high = +84.0°C, crit = +100.0°C)
Adapter: ACPI interface
temp1: +27.8°C (crit = +119.0°C)
temp2: +29.8°C (crit = +119.0°C)
Adapter: PCI adapter
Composite: +32.9°C (low = -273.1°C, high = +69.8°C)
(crit = +72.8°C)
Sensor 1: +32.9°C (low = -273.1°C, high = +65261.8°C)
Sensor 2: +41.9°C (low = -273.1°C, high = +65261.8°C)
(nice to see nvme temps in 5.5 kernel , but that is beside the point)
This report is identical whether nct6775 is loaded or not.
Is there another way to check if the nuvoton chip is just gone dead ???
EDIT: I should add, sensor information is available in the BIOS configuration ...
.... there is nothing - absolutely nothing - half so much worth
doing as simply messing about with Linux ...
(apologies to Kenneth Graeme)
Last edited by albright on Wed Feb 05, 2020 3:30 pm; edited 1 time in total