Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
dmesg: ata3.00 LPM support broken, forcing max_power
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
CaptainBlood
Veteran
Veteran


Joined: 24 Jan 2010
Posts: 1596

PostPosted: Tue Apr 07, 2020 5:44 pm    Post subject: dmesg: ata3.00 LPM support broken, forcing max_power Reply with quote

I got this under
Code:
uname -r
5.6.2-gentoo
SATA2 HD
Code:
IDE 200.0: 10600 Disk
  [Created at block.245]
  Unique ID: 3OOL.Z4qWf_sACh7
  Parent ID: abAj.p8sU12Rg_4A
  SysFS ID: /class/block/sda
  SysFS BusID: 2:0:0:0
  SysFS Device Link: /devices/pci0000:00/0000:00:17.0/ata3/host2/target2:0:0/2:0:0:0
  Hardware Class: disk
  Model: "ST1000LM024 HN-M"
  Vendor: "ST1000LM024"
  Device: "HN-M"
  Revision: "0001"
  Serial ID: "S32XJ9EF463019"
  Driver: "ahci", "sd"
  Driver Modules: "ahci"
  Device File: /dev/sda
  Device Files: /dev/sda, /dev/disk/by-id/ata-ST1000LM024_HN-M101MBB_S32XJ9EF463019, /dev/disk/by-id/wwn-0x50004cf20d0efa0c
  Device Number: block 8:0-8:15
  Geometry (Logical): CHS 121601/255/63
  Size: 1953525168 sectors a 512 bytes
  Capacity: 931 GB (1000204886016 bytes)
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #12 (SATA controller)
Is it due to SATA2? If not any idea what to check?
Thks 4 ur attention, interest & support.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum