Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
after upgrading to 5.6.0 kernel, wifi and bluetooth issues
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
jlm
n00b
n00b


Joined: 27 May 2018
Posts: 9

PostPosted: Mon Apr 13, 2020 8:41 am    Post subject: after upgrading to 5.6.0 kernel, wifi and bluetooth issues Reply with quote

Hi, it's long time that I couldn't upgrade the kernel, because app-emulation/vitualbox-modules were making genkernel fail....
my laptop is a yoga 900 : https://wiki.gentoo.org/wiki/Lenovo_Yoga_900
after
Code:
emerge -Cav app-emulation/vitualbox-modules
I could upgrade
everything went fine just had to patch again the mmc driver to have it work with my 256G samsung micro sdcard....

the issue is related to bluetooth and wifi....

first the wifi : everything seems to work (scanning show the available networks....) but I can't associate, each association falls in timeout.... in the wpa supplicant log, I see
Code:

wlp1s0: Control interface command 'LIST_NETWORKS'
wlp1s0: State: DISCONNECTED -> SCANNING
wlp1s0: Starting AP scan for wildcard SSID
wlp1s0: Add radio work 'scan'@0x55f0658847b0
wlp1s0: First radio work item in the queue - schedule start immediately
wlp1s0: Starting radio work 'scan'@0x55f0658847b0 after 0.000032 second wait
wlp1s0: nl80211: scan request
nl80211: Add NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME
nl80211: Add NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP
nl80211: Add NL80211_SCAN_FLAG_OCE_PROBE_REQ_MIN_TX_RATE
nl80211: Add NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0
wlp1s0: nl80211: Scan trigger
wlp1s0: Event SCAN_STARTED (47) received
wlp1s0: Own scan request started a scan in 0.000120 seconds
EAPOL: EAP Session-Id not available
wlp1s0: Control interface command 'LIST_NETWORKS'
RTM_NEWLINK: ifi_index=2 ifname=wlp1s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0
wlp1s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805 5825
wlp1s0: Event SCAN_RESULTS (3) received
wlp1s0: Scan completed in 0.745992 seconds
nl80211: Received scan results (2 BSSes)
wlp1s0: BSS: Start scan result update 18
BSS: last_scan_res_used=2/32
wlp1s0: New scan results available (own=1 ext=0)
wlp1s0: Radio work 'scan'@0x55f0658847b0 done in 0.750656 seconds
wlp1s0: radio_work_free('scan'@0x55f0658847b0): num_active_works --> 0
wlp1s0: Selecting BSS from priority group 0
wlp1s0: 0: f0:b4:29:88:b5:87 ssid='Xiaomi_Fabrice' wpa_ie_len=26 rsn_ie_len=24 caps=0xc11 level=-52 freq=2412  wps
wlp1s0:    skip - blacklisted (count=1 limit=0)
wlp1s0: 1: 30:b5:c2:c2:86:b8 ssid='location_briancon' wpa_ie_len=0 rsn_ie_len=20 caps=0x431 level=-83 freq=2462  wps
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - SSID mismatch
wlp1s0: No APs found - clear blacklist and try again
Removed BSSID f0:b4:29:88:b5:87 from blacklist (clear)
wlp1s0: Selecting BSS from priority group 0
wlp1s0: 0: f0:b4:29:88:b5:87 ssid='Xiaomi_Fabrice' wpa_ie_len=26 rsn_ie_len=24 caps=0xc11 level=-52 freq=2412  wps
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    skip - disabled
wlp1s0:    selected based on RSN IE
wlp1s0:    selected BSS f0:b4:29:88:b5:87 ssid='Xiaomi_Fabrice'
wlp1s0: Considering connect request: reassociate: 0  selected: f0:b4:29:88:b5:87  bssid: 00:00:00:00:00:00  pending: 00:00:00:00:00:00  wpa_state: SCANNING  ssid=0x55f065879250  current_ssid=(nil)
wlp1s0: Request association with f0:b4:29:88:b5:87
wlp1s0: Re-association to the same ESS
wlp1s0: No ongoing scan/p2p-scan found to abort
wlp1s0: Add radio work 'sme-connect'@0x55f0658847b0
wlp1s0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlp1s0: Starting radio work 'sme-connect'@0x55f0658847b0 after 0.000055 second wait
wlp1s0: WPA: clearing own WPA/RSN IE
wlp1s0: Automatic auth_alg selection: 0x1
wlp1s0: Overriding auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
RSN: Search for BSSID f0:b4:29:88:b5:87
RSN: No PMKSA cache entry found
wlp1s0: RSN: using IEEE 802.11i/D9.0
wlp1s0: WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2
wlp1s0: WPA: Selected mgmt group cipher 32
WPA: set AP WPA IE - hexdump(len=28): dd 1a 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 02 00 50 f2 04 01 00 00 50 f2 02
WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 02 00 0f ac 04 01 00 00 0f ac 02 00 00
wlp1s0: WPA: AP group 0x8 network profile group 0x18; available group 0x8
wlp1s0: WPA: using GTK TKIP
wlp1s0: WPA: AP pairwise 0x18 network profile pairwise 0x10; available pairwise 0x10
wlp1s0: WPA: using PTK CCMP
wlp1s0: WPA: AP key_mgmt 0x2 network profile key_mgmt 0x2; available key_mgmt 0x2
wlp1s0: WPA: using KEY_MGMT WPA-PSK
wlp1s0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
wlp1s0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00
WPA: Set PMK based on external data - hexdump(len=32): [REMOVED]
FT: Stored MDIE and FTIE from (Re)Association Response - hexdump(len=0):
RRM: Determining whether RRM can be used - device support: 0x79
RRM: No RRM in network
Added supported operating classes IE - hexdump(len=9): 3b 07 51 51 73 76 79 7c 7d
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlp1s0: Cancelling scan request
wlp1s0: SME: Trying to authenticate with f0:b4:29:88:b5:87 (SSID='Xiaomi_Fabrice' freq=2412 MHz)
EAPOL: External notification - portValid=0
wlp1s0: State: SCANNING -> AUTHENTICATING
Not configuring frame filtering - BSS 00:00:00:00:00:00 is not a Hotspot 2.0 network
nl80211: Authenticate (ifindex=2)
  * bssid=f0:b4:29:88:b5:87
  * freq=2412
  * SSID=Xiaomi_Fabrice
  * IEs - hexdump(len=0): [NULL]
  * Auth Type 0
nl80211: Authentication request send successfully
nl80211: Drv Event 19 (NL80211_CMD_NEW_STATION) received for wlp1s0
nl80211: New station f0:b4:29:88:b5:87
nl80211: Drv Event 20 (NL80211_CMD_DEL_STATION) received for wlp1s0
nl80211: Delete station f0:b4:29:88:b5:87
nl80211: Drv Event 37 (NL80211_CMD_AUTHENTICATE) received for wlp1s0
nl80211: MLME event 37; timeout with f0:b4:29:88:b5:87
wlp1s0: Event AUTH_TIMED_OUT (13) received
wlp1s0: SME: Authentication timed out
wlp1s0: Radio work 'sme-connect'@0x55f0658847b0 done in 0.052008 seconds
wlp1s0: radio_work_free('sme-connect'@0x55f0658847b0): num_active_works --> 0
Added BSSID f0:b4:29:88:b5:87 into blacklist
Continuous association failures - consider temporary network disabling
wlp1s0: CTRL-EVENT-SSID-TEMP-DISABLED id=12 ssid="Xiaomi_Fabrice" auth_failures=7 duration=90 reason=CONN_FAILED
wlp1s0: Blacklist count 4 --> request scan in 5000 ms
wlp1s0: Setting scan request: 5.000000 sec
nl80211: Data frame filter flags=0x0
wlp1s0: State: AUTHENTICATING -> DISCONNECTED
nl80211: Set wlp1s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
EAPOL: External notification - EAP success=0
EAPOL: EAP Session-Id not available
wlp1s0: Control interface command 'LIST_NETWORKS'
wlp1s0: State: DISCONNECTED -> SCANNING
wlp1s0: Starting AP scan for wildcard SSID
wlp1s0: Add radio work 'scan'@0x55f0658847b0
wlp1s0: First radio work item in the queue - schedule start immediately
wlp1s0: Starting radio work 'scan'@0x55f0658847b0 after 0.000032 second wait
wlp1s0: nl80211: scan request
nl80211: Add NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME
nl80211: Add NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP
nl80211: Add NL80211_SCAN_FLAG_OCE_PROBE_REQ_MIN_TX_RATE
nl80211: Add NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp1s0
wlp1s0: nl80211: Scan trigger
wlp1s0: Event SCAN_STARTED (47) received
wlp1s0: Own scan request started a scan in 0.000122 seconds
EAPOL: EAP Session-Id not available
wlp1s0: Control interface command 'LIST_NETWORKS'
RTM_NEWLINK: ifi_index=2 ifname=wlp1s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp1s0
wlp1s0: nl80211: New scan results available
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5720 5745 5765 5785 5805 5825
wlp1s0: Event SCAN_RESULTS (3) received
wlp1s0: Scan completed in 0.859988 seconds
nl80211: Received scan results (2 BSSes)
wlp1s0: BSS: Start scan result update 19
BSS: last_scan_res_used=2/32
wlp1s0: New scan results available (own=1 ext=0)
wlp1s0: Radio work 'scan'@0x55f0658847b0 done in 0.864464 seconds
wlp1s0: radio_work_free('scan'@0x55f0658847b0): num_active_works --> 0
wlp1s0: Postpone network selection by 84 seconds since all networks are disabled
EAPOL: EAP Session-Id not available
wlp1s0: Control interface command 'LIST_NETWORKS'
wlp1s0: Control interface command 'DISCONNECT'
wlp1s0: Cancelling scan request
wlp1s0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=SCANNING
nl80211: Data frame filter flags=0x0
wlp1s0: State: SCANNING -> DISCONNECTED
nl80211: Set wlp1s0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=2 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
CTRL_IFACE monitor detached /tmp/wpa_ctrl_4465-2\x00
wlp1s0: BSS: Remove id 0 BSSID f0:b4:29:88:b5:87 SSID 'Xiaomi_Fabrice' due to wpa_bss_flush_by_age
wlp1s0: BSS: Remove id 1 BSSID 30:b5:c2:c2:86:b8 SSID 'location_briancon' due to wpa_bss_flush_by_age
nl80211: Drv Event 113 (NL80211_CMD_WIPHY_REG_CHANGE) received for wlp1s0
nl80211: Regulatory domain change
 * initiator=2
 * type=1
wlp1s0: Event CHANNEL_LIST_CHANGED (27) received
wlp1s0: CTRL-EVENT-REGDOM-CHANGE init=DRIVER type=WORLD
wlp1s0: Updating hw mode
nl80211: Regulatory information - country=00
nl80211: 2402-2437 @ 40 MHz 22 mBm
nl80211: 2422-2462 @ 40 MHz 22 mBm
nl80211: 2447-2482 @ 40 MHz 22 mBm
nl80211: 5170-5190 @ 80 MHz 22 mBm (no outdoor) (no IR)
nl80211: 5190-5210 @ 80 MHz 22 mBm (no outdoor) (no IR)
nl80211: 5210-5230 @ 80 MHz 22 mBm (no outdoor) (no IR)
nl80211: 5230-5250 @ 80 MHz 22 mBm (no outdoor) (no IR)
nl80211: 5250-5270 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5270-5290 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5290-5310 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5310-5330 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5490-5510 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5510-5530 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5530-5550 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5550-5570 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5570-5590 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5590-5610 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5610-5630 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5630-5650 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5650-5670 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5670-5690 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5690-5710 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5710-5730 @ 80 MHz 22 mBm (DFS) (no IR)
nl80211: 5735-5755 @ 80 MHz 22 mBm (no IR)
nl80211: 5755-5775 @ 80 MHz 22 mBm (no IR)
nl80211: 5775-5795 @ 80 MHz 22 mBm (no IR)
nl80211: 5795-5815 @ 80 MHz 22 mBm (no IR)
nl80211: 5815-5835 @ 20 MHz 22 mBm (no IR)
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED]
nl80211: Mode IEEE 802.11a: 5180[NO_IR] 5200[NO_IR] 5220[NO_IR] 5240[NO_IR] 5260[NO_IR][RADAR] 5280[NO_IR][RADAR] 5300[NO_IR][RADAR] 5320[NO_IR][RADAR] 5340[DISABLED] 5360[DISABLED] 5380[DISABLED] 5400[DISABLED] 5420[DISABLED]
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484[DISABLED]


I don't see why this timeout......



for bluetooth, the issue is that the interface seems to be blocked by default and that after unblocking it, my mouse seems to connect, but I can't use it on X11.... the pointer don't move at all...

Code:

jlm@jlmyoga900 ~ $ bluetoothctl
Agent registered
[CHG] Controller A4:34:D9:3F:B4:2E Pairable: yes
[bluetooth]# power on
Failed to set power on: org.bluez.Error.Blocked
[bluetooth]# quit
jlm@jlmyoga900 ~ $ rfkill unblock bluetooth
jlm@jlmyoga900 ~ $ bluetoothctl
Agent registered
[CHG] Controller A4:34:D9:3F:B4:2E Pairable: yes
[bluetooth]# power on
Changing power on succeeded
[CHG] Device EC:0E:75:7C:A2:2F Connected: yes
[NEW] Primary Service (Handle 0x748d)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0008
   00001801-0000-1000-8000-00805f9b34fb
   Generic Attribute Profile
[NEW] Primary Service (Handle 0x748d)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0009
   0000180a-0000-1000-8000-00805f9b34fb
   Device Information
[NEW] Characteristic (Handle 0x748d)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0009/char000a
   00002a29-0000-1000-8000-00805f9b34fb
   Manufacturer Name String
[NEW] Characteristic (Handle 0x748d)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0009/char000c
   00002a26-0000-1000-8000-00805f9b34fb
   Firmware Revision String
[NEW] Characteristic (Handle 0x748d)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0009/char000e
   00002a50-0000-1000-8000-00805f9b34fb
   PnP ID
[NEW] Primary Service (Handle 0x748d)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0014
   00001530-1212-efde-1523-785feabcd123
   Vendor specific
[NEW] Characteristic (Handle 0x748d)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0014/char0015
   00001532-1212-efde-1523-785feabcd123
   Vendor specific
[NEW] Characteristic (Handle 0x748d)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0014/char0017
   00001531-1212-efde-1523-785feabcd123
   Vendor specific
[NEW] Descriptor (Handle 0x8b44)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0014/char0017/desc0019
   00002902-0000-1000-8000-00805f9b34fb
   Client Characteristic Configuration
[NEW] Characteristic (Handle 0x748d)
   /org/bluez/hci0/dev_EC_0E_75_7C_A2_2F/service0014/char001a
   00001534-1212-efde-1523-785feabcd123
   Vendor specific
[CHG] Device EC:0E:75:7C:A2:2F ServicesResolved: yes
[CHG] Device EC:0E:75:7C:A2:2F Paired: yes
[CHG] Device EC:0E:75:7C:A2:2F ServicesResolved: no
[CHG] Device EC:0E:75:7C:A2:2F Connected: no
[CHG] Device EC:0E:75:7C:A2:2F Connected: yes
[CHG] Device EC:0E:75:7C:A2:2F ServicesResolved: yes
[CHG] Device EC:0E:75:7C:A2:2F ServicesResolved: no
[CHG] Device EC:0E:75:7C:A2:2F Connected: no
[bluetooth]#



any idea?
thanks and regards
Back to top
View user's profile Send private message
asturm
Developer
Developer


Joined: 05 Apr 2007
Posts: 7739
Location: Austria

PostPosted: Mon Apr 13, 2020 9:01 am    Post subject: Reply with quote

Upgrade to 5.6.3 instead.
_________________
backend.cpp:92:2: warning: #warning TODO - this error message is about as useful as a cooling unit in the arctic
Back to top
View user's profile Send private message
saboya
Guru
Guru


Joined: 28 Nov 2006
Posts: 507
Location: Brazil

PostPosted: Mon Apr 13, 2020 1:17 pm    Post subject: Reply with quote

I had issues with 5.6.0 as well - my Logitech receiver kept powering off after boot, I had to reconnect to make it work. 5.6.2 (or maybe even 5.6.1, didn't test that) fixed it for me.
Back to top
View user's profile Send private message
jlm_devel
n00b
n00b


Joined: 10 Nov 2007
Posts: 24

PostPosted: Wed Apr 15, 2020 6:19 pm    Post subject: Reply with quote

after upgrading to 5.6.4
the wifi works, but still have the same problem with bluetooth.... bluetooth interface is blocked and after unblocking it, it detect the mouse but the mouse don't interact with X11...
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum