Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Only find one cpu core on new gentoo install [SOLVED]
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Langest
n00b
n00b


Joined: 19 Jan 2018
Posts: 30

PostPosted: Mon Apr 13, 2020 1:28 pm    Post subject: Only find one cpu core on new gentoo install [SOLVED] Reply with quote

Hi,

I just installed gentoo on a new system. A thinkpad X260. For some reason only one core is detected on the machine. (Only one tux logo is shown on startup)
You can see below in the cpuinfo that cpu cores is only one as well.

As far as I can tell SMP i active and I'm not sure why it doesn't work. If I boot using the Gentoo live CD from 2016, all is working as expected.

I would be thankful for any pointers or help!

Code:
$ uname -a
Linux tvasexti 5.4.28-gentoo #2 SMP Mon Apr 13 12:44:49 IST GenuineIntel GNU/Linux


Code:
$ cat /proc/cpuinfo
processor   : 0
vendor_id   : GenuineIntel
cpu family   : 6
model      : 78
model name   : Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz
stepping   : 3
microcode   : 0xb0
cpu MHz      : 2900.000
cache size   : 3072 KB
physical id   : 0
siblings   : 1
core id      : 0
cpu cores   : 1
apicid      : 0
initial apicid   : 0
fpu      : yes
fpu_exception   : yes
cpuid level   : 22
wp      : yes
flags      : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb invpcid_single pti tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp
bugs      : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf mds swapgs taa itlb_multihit
bogomips   : 4999.90
clflush size   : 64
cache_alignment   : 64
address sizes   : 39 bits physical, 48 bits virtual
power management:


Code:
$ dmesg
[    0.000000] Linux version 5.4.28-gentoo (root@tvasexti) (gcc version 9.2.0 (Gentoo 9.2.0-r2 p3)) #2 SMP Mon Apr 13 12:44:49 IST 2020
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.28-gentoo root=/dev/sda3 ro
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cbefcfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cbefd000-0x00000000cbefdfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cbefe000-0x00000000cbf27fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cbf28000-0x00000000d582dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d582e000-0x00000000d587efff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000d587f000-0x00000000d7f75fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d7f76000-0x00000000d7f77fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d7f78000-0x00000000d7f78fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d7f79000-0x00000000d7fc5fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d7fc6000-0x00000000d7ffdfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d7ffe000-0x00000000d7ffefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d7fff000-0x00000000d80fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d8600000-0x00000000dc7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fa000-0x00000000f80fafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f80fd000-0x00000000f80fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004217fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI not present or invalid.
[    0.000000] tsc: Detected 2500.000 MHz processor
[    0.001960] tsc: Detected 2499.952 MHz TSC
[    0.001960] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001964] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001976] last_pfn = 0x421800 max_arch_pfn = 0x400000000
[    0.001981] MTRR default type: write-back
[    0.001982] MTRR fixed ranges enabled:
[    0.001984]   00000-9FFFF write-back
[    0.001985]   A0000-BFFFF uncachable
[    0.001986]   C0000-FFFFF write-protect
[    0.001987] MTRR variable ranges enabled:
[    0.001990]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.001992]   1 base 00DC000000 mask 7FFC000000 uncachable
[    0.001993]   2 base 00DA000000 mask 7FFE000000 uncachable
[    0.001994]   3 disabled
[    0.001994]   4 disabled
[    0.001995]   5 disabled
[    0.001995]   6 disabled
[    0.001996]   7 disabled
[    0.001996]   8 disabled
[    0.001997]   9 disabled
[    0.002536] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.003148] last_pfn = 0xd7fff max_arch_pfn = 0x400000000
[    0.016985] check: Scanning 1 areas for low memory corruption
[    0.016992] Using GB pages for direct mapping
[    0.016995] BRK [0x310e00000, 0x310e00fff] PGTABLE
[    0.016998] BRK [0x310e01000, 0x310e01fff] PGTABLE
[    0.016999] BRK [0x310e02000, 0x310e02fff] PGTABLE
[    0.017063] BRK [0x310e03000, 0x310e03fff] PGTABLE
[    0.017065] BRK [0x310e04000, 0x310e04fff] PGTABLE
[    0.017426] BRK [0x310e05000, 0x310e05fff] PGTABLE
[    0.017510] BRK [0x310e06000, 0x310e06fff] PGTABLE
[    0.017747] BRK [0x310e07000, 0x310e07fff] PGTABLE
[    0.017864] BRK [0x310e08000, 0x310e08fff] PGTABLE
[    0.017982] ACPI: Early table checksum verification disabled
[    0.022430] ACPI BIOS Error (bug): A valid RSDP was not found (20190816/tbxfroot-210)
[    0.022614] No NUMA configuration found
[    0.022616] Faking a node at [mem 0x0000000000000000-0x00000004217fffff]
[    0.022622] NODE_DATA(0) allocated [mem 0x4217fc000-0x4217fffff]
[    0.022654] Zone ranges:
[    0.022655]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.022658]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.022660]   Normal   [mem 0x0000000100000000-0x00000004217fffff]
[    0.022664] Movable zone start for each node
[    0.022666] Early memory node ranges
[    0.022668]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.022678]   node   0: [mem 0x0000000000059000-0x000000000009cfff]
[    0.022680]   node   0: [mem 0x0000000000100000-0x00000000cbefcfff]
[    0.022681]   node   0: [mem 0x00000000cbf28000-0x00000000d582dfff]
[    0.022683]   node   0: [mem 0x00000000d7ffe000-0x00000000d7ffefff]
[    0.022684]   node   0: [mem 0x0000000100000000-0x00000004217fffff]
[    0.023174] Zeroed struct page in unavailable ranges: 36961 pages
[    0.023176] Initmem setup node 0 [mem 0x0000000000001000-0x00000004217fffff]
[    0.023179] On node 0 totalpages: 4157343
[    0.023181]   DMA zone: 64 pages used for memmap
[    0.023182]   DMA zone: 21 pages reserved
[    0.023183]   DMA zone: 3995 pages, LIFO batch:0
[    0.023253]   DMA32 zone: 13601 pages used for memmap
[    0.023255]   DMA32 zone: 870404 pages, LIFO batch:63
[    0.039766]   Normal zone: 51296 pages used for memmap
[    0.039767]   Normal zone: 3282944 pages, LIFO batch:63
[    0.093936] Reserving Intel graphics memory at [mem 0xda800000-0xdc7fffff]
[    0.094095] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later)
[    0.094098] smpboot: Boot CPU (id 0) not listed by BIOS
[    0.094100] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.094142] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.094144] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.094147] PM: Registered nosave memory: [mem 0x0009d000-0x000fffff]
[    0.094149] PM: Registered nosave memory: [mem 0xcbefd000-0xcbefdfff]
[    0.094150] PM: Registered nosave memory: [mem 0xcbefe000-0xcbf27fff]
[    0.094152] PM: Registered nosave memory: [mem 0xd582e000-0xd587efff]
[    0.094154] PM: Registered nosave memory: [mem 0xd587f000-0xd7f75fff]
[    0.094155] PM: Registered nosave memory: [mem 0xd7f76000-0xd7f77fff]
[    0.094156] PM: Registered nosave memory: [mem 0xd7f78000-0xd7f78fff]
[    0.094157] PM: Registered nosave memory: [mem 0xd7f79000-0xd7fc5fff]
[    0.094158] PM: Registered nosave memory: [mem 0xd7fc6000-0xd7ffdfff]
[    0.094161] PM: Registered nosave memory: [mem 0xd7fff000-0xd80fffff]
[    0.094162] PM: Registered nosave memory: [mem 0xd8100000-0xd85fffff]
[    0.094163] PM: Registered nosave memory: [mem 0xd8600000-0xdc7fffff]
[    0.094164] PM: Registered nosave memory: [mem 0xdc800000-0xf80f9fff]
[    0.094165] PM: Registered nosave memory: [mem 0xf80fa000-0xf80fafff]
[    0.094166] PM: Registered nosave memory: [mem 0xf80fb000-0xf80fcfff]
[    0.094167] PM: Registered nosave memory: [mem 0xf80fd000-0xf80fdfff]
[    0.094168] PM: Registered nosave memory: [mem 0xf80fe000-0xfdffffff]
[    0.094170] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.094171] PM: Registered nosave memory: [mem 0xfe011000-0xffffffff]
[    0.094173] [mem 0xdc800000-0xf80f9fff] available for PCI devices
[    0.094178] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.317427] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.317670] percpu: Embedded 50 pages/cpu s167320 r8192 d29288 u2097152
[    0.317680] pcpu-alloc: s167320 r8192 d29288 u2097152 alloc=1*2097152
[    0.317681] pcpu-alloc: [0] 0
[    0.317706] Built 1 zonelists, mobility grouping on.  Total pages: 4092361
[    0.317708] Policy zone: Normal
[    0.317710] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.28-gentoo root=/dev/sda3 ro
[    0.319437] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.320280] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.320312] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.327254] Calgary: detecting Calgary via BIOS EBDA area
[    0.327256] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.400788] Memory: 16243560K/16629372K available (16388K kernel code, 1583K rwdata, 4000K rodata, 1356K init, 1928K bss, 385812K reserved, 0K cma-reserved)
[    0.400895] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.400909] Kernel/User page tables isolation: enabled
[    0.401052] rcu: Hierarchical RCU implementation.
[    0.401054] rcu:    RCU event tracing is enabled.
[    0.401056] rcu:    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[    0.401059] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.401062] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.401577] NR_IRQS: 4352, nr_irqs: 32, preallocated irqs: 16
[    0.402200] random: get_random_bytes called from start_kernel+0x30e/0x4cb with crng_init=0
[    0.402239] Console: colour dummy device 80x25
[    0.402554] printk: console [tty0] enabled
[    0.402579] APIC: ACPI MADT or MP tables are not detected
[    0.402633] APIC: Switch to virtual wire mode setup with no configuration
[    0.402637] Not enabling interrupt remapping due to skipped IO-APIC setup
[    0.402650] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x24090c9bc00, max_idle_ns: 440795288559 ns
[    0.402665] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.90 BogoMIPS (lpj=2499952)
[    0.402674] pid_max: default: 32768 minimum: 301
[    0.402710] LSM: Security Framework initializing
[    0.402728] SELinux:  Initializing.
[    0.402814] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.402873] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.403305] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.403349] process: using mwait in idle threads
[    0.403357] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.403361] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.403369] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.403375] Spectre V2 : Mitigation: Full generic retpoline
[    0.403380] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.403385] Speculative Store Bypass: Vulnerable
[    0.403394] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.403398] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.416233] Freeing SMP alternatives memory: 48K
[    0.416339] smpboot: SMP disabled
[    0.416474] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.416490] ... version:                4
[    0.416493] ... bit width:              48
[    0.416496] ... generic registers:      4
[    0.416499] ... value mask:             0000ffffffffffff
[    0.416502] ... max period:             00007fffffffffff
[    0.416506] ... fixed-purpose events:   3
[    0.416509] ... event mask:             000000070000000f
[    0.416581] rcu: Hierarchical SRCU implementation.
[    0.416703] smp: Bringing up secondary CPUs ...
[    0.416708] smp: Brought up 1 node, 1 CPU
[    0.416712] smpboot: Max logical packages: 1
[    0.416716] smpboot: Total of 1 processors activated (4999.90 BogoMIPS)
[    0.417306] devtmpfs: initialized
[    0.417615] PM: Registering ACPI NVS region [mem 0xcbefd000-0xcbefdfff] (4096 bytes)
[    0.417622] PM: Registering ACPI NVS region [mem 0xd7f76000-0xd7f77fff] (8192 bytes)
[    0.417627] PM: Registering ACPI NVS region [mem 0xd7f79000-0xd7fc5fff] (315392 bytes)
[    0.417742] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.417750] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.417787] xor: automatically using best checksumming function   avx       
[    0.417897] PM: RTC time: 12:46:25, date: 2020-04-13
[    0.418022] NET: Registered protocol family 16
[    0.418177] audit: initializing netlink subsys (disabled)
[    0.418413] cpuidle: using governor menu
[    0.418671] PCI: Using configuration type 1 for base access
[    0.418805] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.422687] audit: type=2000 audit(1586781985.015:1): state=initialized audit_enabled=0 res=1
[    0.424709] kworker/u2:1 (99) used greatest stack depth: 14616 bytes left
[    0.424747] kworker/u2:1 (81) used greatest stack depth: 14152 bytes left
[    0.437503] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.455669] raid6: avx2x4   gen() 10972 MB/s
[    0.472664] raid6: avx2x4   xor()  7748 MB/s
[    0.489665] raid6: avx2x2   gen() 11277 MB/s
[    0.506664] raid6: avx2x2   xor()  7408 MB/s
[    0.523666] raid6: avx2x1   gen()  9437 MB/s
[    0.540666] raid6: avx2x1   xor()  6568 MB/s
[    0.557672] raid6: sse2x4   gen()  5113 MB/s
[    0.574669] raid6: sse2x4   xor()  3371 MB/s
[    0.591674] raid6: sse2x2   gen()  4324 MB/s
[    0.608669] raid6: sse2x2   xor()  3146 MB/s
[    0.625665] raid6: sse2x1   gen()  4167 MB/s
[    0.642674] raid6: sse2x1   xor()  2353 MB/s
[    0.642677] raid6: using algorithm avx2x2 gen() 11277 MB/s
[    0.642680] raid6: .... xor() 7408 MB/s, rmw enabled
[    0.642683] raid6: using avx2x2 recovery algorithm
[    0.642782] ACPI: Interpreter disabled.
[    0.642822] iommu: Default domain type: Translated
[    0.642875] vgaarb: loaded
[    0.643024] SCSI subsystem initialized
[    0.643164] libata version 3.00 loaded.
[    0.643293] usbcore: registered new interface driver usbfs
[    0.643319] usbcore: registered new interface driver hub
[    0.643334] usbcore: registered new device driver usb
[    0.643409] videodev: Linux video capture interface: v2.00
[    0.643443] pps_core: LinuxPPS API ver. 1 registered
[    0.643446] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.643465] PTP clock support registered
[    0.643716] EDAC MC: Ver: 3.0.0
[    0.644022] Advanced Linux Sound Architecture Driver Initialized.
[    0.644039] PCI: Probing PCI hardware
[    0.644042] PCI: root bus 00: using default resources
[    0.644043] PCI: Probing PCI hardware (bus 00)
[    0.644072] PCI host bridge to bus 0000:00
[    0.644078] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.644083] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[    0.644087] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.644102] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.644205] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.644223] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit]
[    0.644235] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.644245] pci 0000:00:02.0: reg 0x20: [io  0xe000-0xe03f]
[    0.644322] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[    0.644397] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.644428] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit]
[    0.644513] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.644577] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.644607] pci 0000:00:14.2: reg 0x10: [mem 0xf124a000-0xf124afff 64bit]
[    0.644945] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.644980] pci 0000:00:16.0: reg 0x10: [mem 0xf124b000-0xf124bfff 64bit]
[    0.645069] pci 0000:00:16.0: PME# supported from D3hot
[    0.645167] pci 0000:00:17.0: [8086:9d03] type 00 class 0x010601
[    0.645193] pci 0000:00:17.0: reg 0x10: [mem 0xf1248000-0xf1249fff]
[    0.645205] pci 0000:00:17.0: reg 0x14: [mem 0xf124e000-0xf124e0ff]
[    0.645217] pci 0000:00:17.0: reg 0x18: [io  0xe080-0xe087]
[    0.645228] pci 0000:00:17.0: reg 0x1c: [io  0xe088-0xe08b]
[    0.645240] pci 0000:00:17.0: reg 0x20: [io  0xe060-0xe07f]
[    0.645252] pci 0000:00:17.0: reg 0x24: [mem 0xf124c000-0xf124c7ff]
[    0.645304] pci 0000:00:17.0: PME# supported from D3hot
[    0.645390] pci 0000:00:1c.0: [8086:9d10] type 01 class 0x060400
[    0.645480] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.645562] pci 0000:00:1c.2: [8086:9d12] type 01 class 0x060400
[    0.645711] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.645815] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.646000] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.646021] pci 0000:00:1f.2: reg 0x10: [mem 0xf1244000-0xf1247fff]
[    0.646132] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040300
[    0.646169] pci 0000:00:1f.3: reg 0x10: [mem 0xf1240000-0xf1243fff 64bit]
[    0.646211] pci 0000:00:1f.3: reg 0x20: [mem 0xf1230000-0xf123ffff 64bit]
[    0.646271] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.646356] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500
[    0.646413] pci 0000:00:1f.4: reg 0x10: [mem 0xf124d000-0xf124d0ff 64bit]
[    0.646466] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.646589] pci 0000:00:1f.6: [8086:156f] type 00 class 0x020000
[    0.646622] pci 0000:00:1f.6: reg 0x10: [mem 0xf1200000-0xf121ffff]
[    0.646769] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.646919] pci 0000:02:00.0: [10ec:522a] type 00 class 0xff0000
[    0.646943] pci 0000:02:00.0: reg 0x10: [mem 0xf1100000-0xf1100fff]
[    0.647064] pci 0000:02:00.0: supports D1 D2
[    0.647068] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.647184] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.647192] pci 0000:00:1c.0:   bridge window [mem 0xf1100000-0xf11fffff]
[    0.647669] pci 0000:04:00.0: [8086:24f3] type 00 class 0x028000
[    0.647992] pci 0000:04:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit]
[    0.648608] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.649957] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.649965] pci 0000:00:1c.2:   bridge window [mem 0xf1000000-0xf10fffff]
[    0.649986] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 04
[    0.655947] PCI: pci_cache_line_size set to 64 bytes
[    0.656559] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.656561] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.656562] e820: reserve RAM buffer [mem 0xcbefd000-0xcbffffff]
[    0.656563] e820: reserve RAM buffer [mem 0xd582e000-0xd7ffffff]
[    0.656565] e820: reserve RAM buffer [mem 0xd7fff000-0xd7ffffff]
[    0.656566] e820: reserve RAM buffer [mem 0x421800000-0x423ffffff]
[    0.656848] Bluetooth: Core ver 2.22
[    0.656861] NET: Registered protocol family 31
[    0.656864] Bluetooth: HCI device and connection manager initialized
[    0.656880] Bluetooth: HCI socket layer initialized
[    0.656883] Bluetooth: L2CAP socket layer initialized
[    0.656888] Bluetooth: SCO socket layer initialized
[    0.656902] NetLabel: Initializing
[    0.656904] NetLabel:  domain hash size = 128
[    0.656906] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.656928] NetLabel:  unlabeled traffic allowed by default
[    0.657039] clocksource: Switched to clocksource tsc-early
[    0.658283] random: fast init done
[    0.820347] VFS: Disk quotas dquot_6.6.0
[    0.820366] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.820421] pnp: PnP ACPI: disabled
[    0.823029] thermal_sys: Registered thermal governor 'step_wise'
[    0.823030] thermal_sys: Registered thermal governor 'user_space'
[    0.823069] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.823081] pci 0000:00:1c.0:   bridge window [mem 0xf1100000-0xf11fffff]
[    0.823090] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.823096] pci 0000:00:1c.2:   bridge window [mem 0xf1000000-0xf10fffff]
[    0.823107] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.823110] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[    0.823114] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf11fffff]
[    0.823117] pci_bus 0000:04: resource 1 [mem 0xf1000000-0xf10fffff]
[    0.823154] NET: Registered protocol family 2
[    0.823313] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.823344] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.823556] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.823771] TCP: Hash tables configured (established 131072 bind 65536)
[    0.823803] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.823861] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.825073] NET: Registered protocol family 1
[    0.825167] RPC: Registered named UNIX socket transport module.
[    0.825171] RPC: Registered udp transport module.
[    0.825173] RPC: Registered tcp transport module.
[    0.825175] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.825326] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.825342] pci 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.825693] PCI: CLS 0 bytes, default 64
[    0.825744] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.825748] software IO TLB: mapped [mem 0xd182e000-0xd582e000] (64MB)
[    0.825803] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    0.825807] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    0.825809] RAPL PMU: hw unit of domain package 2^-14 Joules
[    0.825812] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    0.825814] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    0.825817] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    0.825936] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.826132] check: Scanning for low memory corruption every 60 seconds
[    0.826617] Initialise system trusted keyrings
[    0.826897] workingset: timestamp_bits=56 max_order=22 bucket_order=0
[    0.832451] NFS: Registering the id_resolver key type
[    0.832462] Key type id_resolver registered
[    0.832464] Key type id_legacy registered
[    0.832475] ntfs: driver 2.1.32 [Flags: R/O].
[    0.832677] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.834714] SGI XFS with security attributes, no debug enabled
[    0.841429] Key type asymmetric registered
[    0.841434] Asymmetric key parser 'x509' registered
[    0.841446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.841450] io scheduler mq-deadline registered
[    0.841452] io scheduler kyber registered
[    0.841538] pcieport 0000:00:1c.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.841622] pcieport 0000:00:1c.0: PME: Signaling with IRQ 16
[    0.841703] pcieport 0000:00:1c.2: can't find IRQ for PCI INT C; please try using pci=biosirq
[    0.841764] pcieport 0000:00:1c.2: PME: Signaling with IRQ 17
[    0.842276] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.842805] Non-volatile memory driver v1.3
[    0.842842] Linux agpgart interface v0.103
[    0.843090] i915 0000:00:02.0: enabling device (0006 -> 0007)
[    0.843096] i915 0000:00:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.893901] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.893906] [drm] Driver supports precise vblank timestamp query.
[    0.893961] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=mem
[    0.894898] i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1_27.bin failed with error -2
[    0.894905] i915 0000:00:02.0: Failed to load DMC firmware i915/skl_dmc_ver1_27.bin. Disabling runtime power management.
[    0.894910] i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[    0.930096] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[    0.932618] loop: module loaded
[    0.932647] rtsx_pci 0000:02:00.0: enabling device (0000 -> 0002)
[    0.932658] rtsx_pci 0000:02:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.933461] ahci 0000:00:17.0: version 3.0
[    0.933470] ahci 0000:00:17.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.933584] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    0.933591] ahci 0000:00:17.0: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[    0.934600] scsi host0: ahci
[    0.934856] scsi host1: ahci
[    0.934916] ata1: DUMMY
[    0.934920] ata2: SATA max UDMA/133 abar m2048@0xf124c000 port 0xf124c180 irq 20
[    0.935013] tun: Universal TUN/TAP device driver, 1.6
[    0.935132] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.935135] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.935159] e1000e 0000:00:1f.6: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.935218] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.029714] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    1.104805] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) c8:5b:76:9c:73:4b
[    1.104811] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    1.104893] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: 1000FF-0FF
[    1.104933] Intel(R) Wireless WiFi driver for Linux
[    1.104936] Copyright(c) 2003- 2015 Intel Corporation
[    1.105328] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
[    1.105387] iwlwifi 0000:04:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    1.108179] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-36.ucode failed with error -2
[    1.108196] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-35.ucode failed with error -2
[    1.108210] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-34.ucode failed with error -2
[    1.108224] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2
[    1.108237] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2
[    1.108250] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-31.ucode failed with error -2
[    1.108263] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-30.ucode failed with error -2
[    1.108277] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-29.ucode failed with error -2
[    1.108290] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-28.ucode failed with error -2
[    1.108303] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-27.ucode failed with error -2
[    1.108316] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-26.ucode failed with error -2
[    1.108329] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-25.ucode failed with error -2
[    1.108342] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-24.ucode failed with error -2
[    1.108355] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-23.ucode failed with error -2
[    1.108368] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-22.ucode failed with error -2
[    1.108374] iwlwifi 0000:04:00.0: no suitable firmware found!
[    1.108378] iwlwifi 0000:04:00.0: minimum version required: iwlwifi-8000C-22
[    1.108382] iwlwifi 0000:04:00.0: maximum version supported: iwlwifi-8000C-36
[    1.108385] iwlwifi 0000:04:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
[    1.109038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.109042] ehci-pci: EHCI PCI platform driver
[    1.109061] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.109081] ohci-pci: OHCI PCI platform driver
[    1.109098] uhci_hcd: USB Universal Host Controller Interface driver
[    1.109164] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    1.109194] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.109281] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.110424] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810
[    1.110432] ACPI: <n/a>: failed to evaluate _DSM (0x1001)
[    1.110441] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.110674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    1.110680] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.110684] usb usb1: Product: xHCI Host Controller
[    1.110687] usb usb1: Manufacturer: Linux 5.4.28-gentoo xhci-hcd
[    1.110691] usb usb1: SerialNumber: 0000:00:14.0
[    1.110839] hub 1-0:1.0: USB hub found
[    1.110859] hub 1-0:1.0: 12 ports detected
[    1.111252] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.111304] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.111311] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.111351] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    1.111356] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.111360] usb usb2: Product: xHCI Host Controller
[    1.111363] usb usb2: Manufacturer: Linux 5.4.28-gentoo xhci-hcd
[    1.111367] usb usb2: SerialNumber: 0000:00:14.0
[    1.111538] hub 2-0:1.0: USB hub found
[    1.111553] hub 2-0:1.0: 6 ports detected
[    1.111822] usbcore: registered new interface driver cdc_acm
[    1.111825] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.111855] usbcore: registered new interface driver usblp
[    1.111888] usbcore: registered new interface driver usb-storage
[    1.111957] i8042: PNP: No PS/2 controller found.
[    1.111960] i8042: Probing ports directly.
[    1.114723] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.114730] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.115636] rtc_cmos rtc_cmos: registered as rtc0
[    1.115726] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    1.115799] i801_smbus 0000:00:1f.4: enabling device (0000 -> 0003)
[    1.115813] i801_smbus 0000:00:1f.4: can't find IRQ for PCI INT A; please try using pci=biosirq
[    1.115833] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.115859] genirq: Flags mismatch irq 0. 00000080 (i801_smbus) vs. 00015a00 (timer)
[    1.115901] i801_smbus 0000:00:1f.4: Failed to allocate irq 0: -16
[    1.115905] i801_smbus 0000:00:1f.4: SMBus using polling
[    1.116328] usbcore: registered new interface driver uvcvideo
[    1.116331] USB Video Class driver (1.1.1)
[    1.116527] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.118512] intel_pch_thermal 0000:00:14.2: can't find IRQ for PCI INT C; please try using pci=biosirq
[    1.118750] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    1.118783] usbcore: registered new interface driver btusb
[    1.118788] intel_pstate: Intel P-state driver initializing
[    1.118837] intel_pstate: HWP enabled
[    1.118869] sdhci: Secure Digital Host Controller Interface driver
[    1.118872] sdhci: Copyright(c) Pierre Ossman
[    1.118965] hidraw: raw HID events driver (C) Jiri Kosina
[    1.119039] usbcore: registered new interface driver usbhid
[    1.119040] usbhid: USB HID core driver
[    1.119100] intel_pmc_core intel_pmc_core.0:  initialized
[    1.119256] snd_hda_intel 0000:00:1f.3: can't find IRQ for PCI INT A; please try using pci=biosirq
[    1.119300] usbcore: registered new interface driver snd-usb-audio
[    1.119639] Initializing XFRM netlink socket
[    1.119762] NET: Registered protocol family 10
[    1.121016] Segment Routing with IPv6
[    1.121052] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.121153] NET: Registered protocol family 17
[    1.121156] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.121158] Bluetooth: HIDP socket layer initialized
[    1.121168] Key type dns_resolver registered
[    1.121278] microcode: sig=0x406e3, pf=0x80, revision=0xb0
[    1.121309] microcode: Microcode Update Driver: v2.2.
[    1.121311] IPI shorthand broadcast: enabled
[    1.121318] sched_clock: Marking stable (1119912519, 565846)->(1120403381, 74984)
[    1.121360] registered taskstats version 1
[    1.121362] Loading compiled-in X.509 certificates
[    1.123118] Btrfs loaded, crc32c=crc32c-generic
[    1.123288] PM:   Magic number: 0:472:784
[    1.123317] printk: console [netcon0] enabled
[    1.123319] netconsole: network logging started
[    1.123354] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    1.123836] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    1.123839] ALSA device list:
[    1.123841]   No soundcards found.
[    1.123863] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    1.123865] cfg80211: failed to load regulatory.db
[    1.124680] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 0xffffffff904b6f40)
[    1.124852] fbcon: i915drmfb (fb0) is primary device
[    1.147016] Console: switching to colour frame buffer device 170x48
[    1.148329] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    1.148331] snd_hda_codec_generic hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.148333] snd_hda_codec_generic hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    1.148334] snd_hda_codec_generic hdaudioC0D0:    mono: mono_out=0x0
[    1.148335] snd_hda_codec_generic hdaudioC0D0:    inputs:
[    1.148336] snd_hda_codec_generic hdaudioC0D0:      Mic=0x1a
[    1.148337] snd_hda_codec_generic hdaudioC0D0:      Internal Mic=0x12
[    1.154089] snd_hda_codec_generic hdaudioC0D2: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[    1.154091] snd_hda_codec_generic hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.154093] snd_hda_codec_generic hdaudioC0D2:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    1.154093] snd_hda_codec_generic hdaudioC0D2:    mono: mono_out=0x0
[    1.154094] snd_hda_codec_generic hdaudioC0D2:    dig-out=0x3/0x0
[    1.154095] snd_hda_codec_generic hdaudioC0D2:    inputs:
[    1.155538] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input3
[    1.155587] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input4
[    1.155631] input: HDA Intel PCH HDMI as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[    1.165291] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    1.255291] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.257163] ata2.00: supports DRM functions and may not be fully accessible
[    1.258075] ata2.00: ATA-11: Samsung SSD 860 PRO 512GB, RVM01B6Q, max UDMA/133
[    1.258117] ata2.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.260629] ata2.00: supports DRM functions and may not be fully accessible
[    1.264813] ata2.00: configured for UDMA/133
[    1.266119] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    1.267551] ata2.00: Enabling discard_zeroes_data
[    1.268814] sd 1:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[    1.270182] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.271458] sd 1:0:0:0: [sda] Write Protect is off
[    1.272713] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.272838] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.274348] ata2.00: Enabling discard_zeroes_data
[    1.276701]  sda: sda1 sda2 sda3
[    1.278311] ata2.00: Enabling discard_zeroes_data
[    1.279592] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.468966] usb 1-8: new high-speed USB device number 2 using xhci_hcd
[    1.540399] usb 1-8: New USB device found, idVendor=04f2, idProduct=b52c, bcdDevice= 0.29
[    1.541831] usb 1-8: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    1.543233] usb 1-8: Product: Integrated Camera
[    1.544594] usb 1-8: Manufacturer: Chicony Electronics Co.,Ltd.
[    1.545982] usb 1-8: SerialNumber: 0001
[    1.551503] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b52c)
[    1.560927] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input6
[    1.676549] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[    1.804962] usb 1-9: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78
[    1.806580] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    1.808148] usb 1-9: SerialNumber: eb3354423f3e
[    1.847252] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x24090c9bc00, max_idle_ns: 440795288559 ns
[    1.849042] clocksource: Switched to clocksource tsc
[    1.930488] psmouse serio1: synaptics: queried max coordinates: x [..5712], y [..4780]
[    1.962854] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1074..]
[    1.964574] psmouse serio1: synaptics: The touchpad can support a better bus than the too old PS/2 protocol. Make sure MOUSE_PS2_SYNAPTICS_SMBUS and RMI4_SMB are enabled to get a better touchpad experience.
[    2.028293] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf002a3/0x943300/0x12e800/0x10000, board id: 3075, fw id: 2560
[    2.030256] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.070507] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.075293] md: Waiting for all devices to be available before autodetect
[    2.077334] md: If you don't use raid, use raid=noautodetect
[    2.705093] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.901755] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[    2.976571] md: Autodetecting RAID arrays.
[    2.978893] md: autorun ...
[    2.981239] md: ... autorun DONE.
[    2.987097] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.987973] VFS: Mounted root (ext4 filesystem) readonly on device 8:3.
[    2.989298] devtmpfs: mounted
[    2.990506] Freeing unused kernel image memory: 1356K
[    2.992742] Write protecting the kernel read-only data: 22528k
[    2.993873] Freeing unused kernel image memory: 2000K
[    2.994782] Freeing unused kernel image memory: 96K
[    2.995541] Run /sbin/init as init process
[    3.045297] loadkeys (1205) used greatest stack depth: 13632 bytes left
[    3.047915] init-early.sh (1203) used greatest stack depth: 13192 bytes left
[    3.260247] gendepends.sh (1304) used greatest stack depth: 13144 bytes left
[    3.593797] udevd[1650]: starting version 3.2.9
[    3.596113] random: udevd: uninitialized urandom read (16 bytes read)
[    3.596309] random: udevd: uninitialized urandom read (16 bytes read)
[    3.596317] random: udevd: uninitialized urandom read (16 bytes read)
[    3.607613] udevd[1650]: starting eudev-3.2.9
[    3.659425] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    3.659431] mei_me 0000:00:16.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    3.670744] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    4.626806] EXT4-fs (sda3): re-mounted. Opts: (null)
[    4.911741] ip (2263) used greatest stack depth: 12456 bytes left
[    7.587932] random: crng init done
[    7.587936] random: 7 urandom warning(s) missed due to ratelimiting
[    9.132293] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[    9.132359] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[  133.932750] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  133.945727] usb 2-1: New USB device found, idVendor=0951, idProduct=16ae, bcdDevice= 1.10
[  133.945728] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  133.945729] usb 2-1: Product: DT microDuo 3C
[  133.945730] usb 2-1: Manufacturer: Kingston
[  133.945731] usb 2-1: SerialNumber: 408D5CE4C204B0B179341414
[  133.947048] usb-storage 2-1:1.0: USB Mass Storage device detected
[  133.961752] scsi host2: usb-storage 2-1:1.0
[  134.964424] scsi 2:0:0:0: Direct-Access     Kingston DT microDuo 3C   PMAP PQ: 0 ANSI: 6
[  134.964883] sd 2:0:0:0: Attached scsi generic sg1 type 0
[  134.966016] sd 2:0:0:0: [sdb] 30277632 512-byte logical blocks: (15.5 GB/14.4 GiB)
[  134.966527] sd 2:0:0:0: [sdb] Write Protect is off
[  134.966528] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 00
[  134.966721] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  135.021291]  sdb: sdb1
[  135.023482] sd 2:0:0:0: [sdb] Attached SCSI removable disk


Last edited by Langest on Mon Apr 13, 2020 4:01 pm; edited 1 time in total
Back to top
View user's profile Send private message
Anon-E-moose
Advocate
Advocate


Joined: 23 May 2008
Posts: 4537
Location: Dallas area

PostPosted: Mon Apr 13, 2020 1:34 pm    Post subject: Reply with quote

Code:
[    0.094098] smpboot: Boot CPU (id 0) not listed by BIOS
[    0.094100] smpboot: Allowing 1 CPUs, 0 hotplug CPUs


wgetpaste your .config
_________________
PRIME x570-pro, 3700x, RX 550 & 560
Acer E5-575 (laptop), i3-7100u - i965
---both---
5.5.18 zen kernel, gcc 9.3.0, profile 17.1 (no-pie & modified) amd64-no-multilib, eudev, openrc, openbox, palemoon
Back to top
View user's profile Send private message
toralf
Developer
Developer


Joined: 01 Feb 2004
Posts: 3769
Location: Hamburg

PostPosted: Mon Apr 13, 2020 1:58 pm    Post subject: Re: Only find one cpu core on new gentoo install Reply with quote

Langest wrote:
For some reason only one core is detected on the machine.
May I ask for this config value
Code:
Processor family (Core 2/newer Xeon)  --->
which is IMO the culprit b/c with the right processor you shoul dhave sth like
Code:
# uname -a
Linux t44 5.6.4 #4 SMP Mon Apr 13 13:45:45 CEST 2020 x86_64 Intel(R) Core(TM) i5-4300U CPU @ 1.90GHz GenuineIntel GNU/Linux
Back to top
View user's profile Send private message
toralf
Developer
Developer


Joined: 01 Feb 2004
Posts: 3769
Location: Hamburg

PostPosted: Mon Apr 13, 2020 2:08 pm    Post subject: Reply with quote

And maybe OT, but why do you have this time jump here:
Code:
[    9.132359] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[  133.932750] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Back to top
View user's profile Send private message
mike155
Advocate
Advocate


Joined: 17 Sep 2010
Posts: 2126
Location: Frankfurt, Germany

PostPosted: Mon Apr 13, 2020 2:11 pm    Post subject: Re: Only find one cpu core on new gentoo install Reply with quote

Langest wrote:
I would be thankful for any pointers or help!

Search at your favorite search engine for
Code:
smpboot: Boot CPU (id 0) not listed by BIOS

You will get a couple of results. Suggested solutions include 'reset BIOS config', 'boot with kernel parameter acpi=off', etc.
Back to top
View user's profile Send private message
Langest
n00b
n00b


Joined: 19 Jan 2018
Posts: 30

PostPosted: Mon Apr 13, 2020 3:03 pm    Post subject: Reply with quote

Quote:
Search at your favorite search engine for
Code:
smpboot: Boot CPU (id 0) not listed by BIOS   


You will get a couple of results. Suggested solutions include 'reset BIOS config', 'boot with kernel parameter acpi=off', etc.


Looking into this now

Quote:
And maybe OT, but why do you have this time jump here:
Code:
[    9.132359] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[  133.932750] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd

Not sure, I expect that some usb driver is eating the time.

Quote:
May I ask for this config value
Code:
Processor family (Core 2/newer Xeon)  --->

I had it set to Core 2/newer Xeon, but now I have also tried Generic-x86-64 as well and the problem persists.

Quote:
wgetpaste your .config

http://dpaste.com/3K3SZ83
Back to top
View user's profile Send private message
Langest
n00b
n00b


Joined: 19 Jan 2018
Posts: 30

PostPosted: Mon Apr 13, 2020 4:00 pm    Post subject: Reply with quote

I did a BIOS update and now it seems to work.

Thanks for the help!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum