Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[solved] Intel I1211AT ethernet
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware
View previous topic :: View next topic  
Author Message
Tony0945
Advocate
Advocate


Joined: 25 Jul 2006
Posts: 3678
Location: Illinois, USA

PostPosted: Wed Apr 29, 2020 3:20 pm    Post subject: [solved] Intel I1211AT ethernet Reply with quote

I'm considering buying an ASUS Prime X570-Pro motherboard with I1211AT ethernet, but I can't figure out which linux kernel module supports it. Would I need an out of kernel mosule? In that case I would prefer a different mobo with Realtek R8169 support.
Anyone running this board? The google tells me nothing and I can't find it in menuconfig.


Last edited by Tony0945 on Wed Apr 29, 2020 4:33 pm; edited 1 time in total
Back to top
View user's profile Send private message
Jaglover
Watchman
Watchman


Joined: 29 May 2005
Posts: 7677
Location: Saint Amant, Acadiana

PostPosted: Wed Apr 29, 2020 3:31 pm    Post subject: Reply with quote

The driver is igb, methinks. I'd never choose Realtek over Intel NIC.
_________________
Please learn how to denote units correctly!
Back to top
View user's profile Send private message
Anon-E-moose
Advocate
Advocate


Joined: 23 May 2008
Posts: 4537
Location: Dallas area

PostPosted: Wed Apr 29, 2020 3:38 pm    Post subject: Reply with quote

Yep, it's igb. (I have the motherboard)
_________________
PRIME x570-pro, 3700x, RX 550 & 560
Acer E5-575 (laptop), i3-7100u - i965
---both---
5.5.18 zen kernel, gcc 9.3.0, profile 17.1 (no-pie & modified) amd64-no-multilib, eudev, openrc, openbox, palemoon
Back to top
View user's profile Send private message
Tony0945
Advocate
Advocate


Joined: 25 Jul 2006
Posts: 3678
Location: Illinois, USA

PostPosted: Wed Apr 29, 2020 4:33 pm    Post subject: Reply with quote

Code:
 This driver supports Intel(R) 82575/82576 gigabit ethernet family of                                                                                                                  │
  │ adapters.
Oh, it's obvious! sorry to be snarkey. no breakfast yet.

Jaglover and Anon-E-Moose. Thank you for those prompt replies. You two have helped me a lot in the past and I really appreciate it.

Anon-E-moose, since you own one, would you care to make any general comments or specific hardware recommendations? Planning a Ryzen 3900X for it, because the 3950X doesn't seem to offer enough performance boost to justify the cost. No gaming, but virtual machines and lot's of compiling.

Thinking of Western Digital Black 1 TB NVME main drive (Samsung EVO is 10% faster but twice the price). WD GOLD 6TB HDD for bulk storage.

Crucial Ballistix 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3600 (PC4 28800) Model BL2K16G36C16U4R because of 15 years experience with Micron.
most builds seem to use G. skill but I also see comments about infant mortality. I was also thinking of a single 32GB to be later expanded, but that would seem t9o entail a performance hit.
Back to top
View user's profile Send private message
Anon-E-moose
Advocate
Advocate


Joined: 23 May 2008
Posts: 4537
Location: Dallas area

PostPosted: Wed Apr 29, 2020 4:55 pm    Post subject: Reply with quote

Took a little fiddling to get the bios set where I wanted it (playing with new hardware at the same time :roll: ) but overall, I like the board,
I mated it with the 3700x because it's one of the low power models, but the performance is pretty good.

I went with 2 G.Skill ripjaws f4-3600C16d-32gvkc so 64 gb ram @ 3600 (on sale and bundle deal)

I had bought the 870 evo plus 500gb nvme because it was on sale, but I've been reading about the latest nvmes and I'm impressed with both the wd black sn750 and Adata XPG SX8200 Pro (both have almost identical specs due to using same controller).

I'm real impressed with the Corsair Force MP600 but I'll wait and see how performance stands up and I expect other nvme makers are looking at moving to gen 4 pcie for their new products.
Capacity: 500GB, 1TB, or 2TB | Interface: M.2 PCIe 4.0 x4 | Sequential speed: 4,950MB/s read | 4,250MB/s write | Endurance: 1,800 TBW (1TB SSD)

Edit to add: some timings ( fx8320 I did have vs 3700x )
sys-devel/gcc-8.2.0-r6 merge time: 41 minutes and 23 seconds.
sys-devel/gcc-8.2.0-r6 merge time: 15 minutes and 7 seconds

www-client/palemoon-28.8.4 merge time: 28 minutes and 33 seconds
www-client/palemoon-28.8.4 merge time: 12 minutes and 2 seconds

and this is with -j14 instead of -j8 (fx)

ETA2: I can't speak to sudden death (G.Skill) but so far no problems.
Part of it is most people seem to have a hard time keeping the systems cool, I have an old antec case that I like, multiple fans (front, back, top and especially side)

Code:
 $ sensors
nct6798-isa-0290
Adapter: ISA adapter
Vcore:                 984.00 mV (min =  +0.00 V, max =  +1.74 V)
in1:                   992.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
AVSB:                    3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3VCC:                    3.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
+12V:                   12.19 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in5:                   896.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
+5V:                     4.96 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
3.3V:                    3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
Vbat:                    3.28 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
in9:                   904.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in13:                  984.00 mV (min =  +0.00 V, max =  +0.00 V)  ALARM
in14:                    1.02 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
fan1:                  1776 RPM  (min =    0 RPM)
CPU Fan:                799 RPM  (min =    0 RPM)
fan3:                  1407 RPM  (min =    0 RPM)
fan4:                     0 RPM  (min =    0 RPM)
fan5:                     0 RPM  (min =    0 RPM)
fan6:                     0 RPM  (min =    0 RPM)
fan7:                     0 RPM  (min =    0 RPM)
SYSTIN:                 +32.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
CPUTIN:                 +34.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
AUXTIN0:                +26.0°C    sensor = thermistor
AUXTIN1:                +32.0°C    sensor = thermistor
AUXTIN2:                +21.0°C    sensor = thermistor
AUXTIN3:                +25.0°C    sensor = thermistor
PCH_CHIP_CPU_MAX_TEMP:   +0.0°C 
beep_enable:           disabled

amdgpu-pci-0a00
Adapter: PCI adapter
vddgfx:      787.00 mV
fan1:         581 RPM  (min =    0 RPM, max = 3200 RPM)
edge:         +32.0°C  (crit = +94.0°C, hyst = -273.1°C)
power1:        7.20 W  (cap =  46.00 W)

nvme-pci-0100
Adapter: PCI adapter
Composite:    +34.9°C  (low  = -273.1°C, high = +84.8°C)
                       (crit = +84.8°C)
Sensor 1:     +34.9°C  (low  = -273.1°C, high = +65261.8°C)
Sensor 2:     +33.9°C  (low  = -273.1°C, high = +65261.8°C)

k10temp-pci-00c3
Adapter: PCI adapter
Vcore:       1000.00 mV
Vsoc:          1.08 V 
Tdie:         +37.8°C 
Tctl:         +37.8°C 
Tccd1:        +38.0°C 
Icore:         3.00 A 
Isoc:          7.50 A 


To put the temps into perspective ambient temp in room is 26C right now, playing music, browsing.
_________________
PRIME x570-pro, 3700x, RX 550 & 560
Acer E5-575 (laptop), i3-7100u - i965
---both---
5.5.18 zen kernel, gcc 9.3.0, profile 17.1 (no-pie & modified) amd64-no-multilib, eudev, openrc, openbox, palemoon
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Kernel & Hardware All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum