Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
eselect-opencl is blocking ..
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German)
View previous topic :: View next topic  
Author Message
Erdie
Advocate
Advocate


Joined: 20 May 2004
Posts: 2066
Location: Heidelberg - Germany

PostPosted: Wed May 13, 2020 4:02 pm    Post subject: eselect-opencl is blocking .. Reply with quote

Ich frage mich ob diese Problem durch Löschen von eselect-opencl gelöst werden kann, traue mich aber nicht es zu tun, derweil es sein kann, dass es fehlschlägt und ich es nicht mehr installiert bekomme. Kann mir jemand einen Rat geben?

Code:

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild  N     ] dev-util/opencl-headers-2020.03.13-r1::gentoo  48 KiB
[ebuild     U  ] dev-libs/ocl-icd-2.2.12-r3::gentoo [2.2.12::gentoo] USE="khronos-headers" ABI_X86="32 (64) (-x32)" 0 KiB
[ebuild     U  ] virtual/opencl-3-r1::gentoo [2::gentoo] ABI_X86="32 (64) (-x32)" VIDEO_CARDS="(-amdgpu%) (-i965%) (-nvidia%*) (-r600%) (-radeonsi%)" 0 KiB
[ebuild     U  ] dev-python/zstandard-0.13.0::gentoo [0.12.0::gentoo] USE="-test" PYTHON_TARGETS="python2_7 python3_6 python3_7 (-python3_8)" 644 KiB
[ebuild     U  ] dev-vcs/mercurial-5.3.2::gentoo [5.2.2-r1::gentoo] USE="chg -emacs -gpg -test -tk -zsh-completion" PYTHON_TARGETS="python2_7 python3_6 python3_7%* (-python3_8)" 7.339 KiB
[ebuild     U  ] net-misc/youtube-dl-2020.05.08::gentoo [2020.05.03::gentoo] USE="-test" PYTHON_TARGETS="python3_6 python3_7 (-python3_8)" 3.099 KiB
[ebuild     U  ] net-misc/wget-1.20.3-r3::gentoo [1.20.3-r1::gentoo] USE="ipv6 nls pcre (ssl) zlib -cookie_check% -debug -gnutls -idn -libressl -metalink% -ntlm -static -test -uuid" 0 KiB
[ebuild     U  ] sys-apps/lm-sensors-3.6.0:0/5.0.0::gentoo [3.5.0:0/5.0.0::gentoo] USE="-contrib -sensord -static-libs" ABI_X86="32 (64) (-x32)" 267 KiB
[ebuild     U ~] net-im/zoom-5.0.403652.0509::gentoo [5.0.399860.0429::gentoo] USE="(-bundled-libjpeg-turbo) -pulseaudio" 40.535 KiB
[ebuild     U  ] www-plugins/adobe-flash-32.0.0.371:22::gentoo [32.0.0.363:22::gentoo] USE="nsplugin ppapi" ABI_X86="32 64 (-x32)" 34.854 KiB
[ebuild     U ~] media-sound/teamspeak-client-3.5.3::gentoo [3.5.2::gentoo] USE="alsa -pulseaudio" 95.171 KiB
[ebuild     U  ] app-arch/rpm-4.14.2.1-r1::gentoo [4.14.1::gentoo] USE="acl dbus%* nls -caps -doc -lua -python (-selinux) -test -zstd%" PYTHON_SINGLE_TARGET="python3_6 -python3_7%" 4.060 KiB
[ebuild     U  ] net-misc/dropbox-cli-2020.03.04::gentoo [19::gentoo] PYTHON_TARGETS="python3_6 python3_7%* (-python3_8)" 14 KiB
[ebuild     U  ] kde-apps/kio-extras-19.12.3-r1:5::gentoo [19.12.3:5::gentoo] USE="activities handbook man phonon sftp taglib -debug -mtp -nfs -openexr -samba -test" 0 KiB
[ebuild     U  ] media-video/vlc-3.0.10-r1:0/5-9::gentoo [3.0.8:0/5-9::gentoo] USE="X a52 alsa dbus dts dvbpsi dvd encode ffmpeg flac gcrypt jack jpeg libnotify libsamplerate mad mp3 mpeg ncurses ogg opus png qt5 ssl svg taglib truetype udev vdpau vorbis x264 xml -aom -archive -aribsub -bidi -bluray -cddb -chromaprint -chromecast -dav1d -dc1394 -debug (-directx) -faad -fdk -fluidsynth -fontconfig -gme -gnome-keyring -gstreamer -ieee1394 -kate -libass -libcaca -libtar -libtiger -linsys -lirc -live -lua -macosx-notifications -matroska -modplug -mtp -musepack -nfs -omxil -optimisememory -projectm -pulseaudio -rdp -run-as-root -samba -sdl-image -sftp -shout -sid -skins -soxr -speex -srt -test -theora -tremor -twolame -upnp -v4l -vaapi -vnc -vpx -wayland -x265 -zeroconf -zvbi (-altivec%)" CPU_FLAGS_X86="mmx sse" 25.486 KiB
[blocks B      ] app-eselect/eselect-opencl ("app-eselect/eselect-opencl" is blocking dev-libs/ocl-icd-2.2.12-r3, dev-util/opencl-headers-2020.03.13-r1)

Total: 15 packages (14 upgrades, 1 new), Size of downloads: 211.511 KiB
Conflict: 1 block (1 unsatisfied)

 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  (app-eselect/eselect-opencl-1.1.0-r4:0/0::gentoo, installed) pulled in by
    app-eselect/eselect-opencl required by (x11-drivers/nvidia-drivers-440.82:0/440::gentoo, installed) USE="X acpi driver gtk3 kms libglvnd multilib tools -compat -static-libs -uvm -wayland" ABI_X86="32 (64) (-x32)"

  (dev-libs/ocl-icd-2.2.12-r3:0/0::gentoo, ebuild scheduled for merge) pulled in by
    dev-libs/ocl-icd[khronos-headers,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_riscv_lp64d(-)?,abi_riscv_lp64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (dev-libs/ocl-icd[khronos-headers,abi_x86_32(-),abi_x86_64(-)]) required by (virtual/opencl-3-r1:0/0::gentoo, ebuild scheduled for merge) USE="" ABI_X86="32 (64) (-x32)"
    dev-libs/ocl-icd[khronos-headers,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_riscv_lp64d(-)?,abi_riscv_lp64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (dev-libs/ocl-icd[khronos-headers,abi_x86_32(-),abi_x86_64(-)]) required by (media-libs/mesa-19.3.5:0/0::gentoo, installed) USE="X classic dri3 egl gallium gbm gles2 libglvnd llvm opencl vdpau wayland -d3d9 -debug -gles1 -lm-sensors -osmesa -pax_kernel (-selinux) -test -unwind -vaapi -valgrind -vulkan -vulkan-overlay -xa -xvmc" ABI_X86="32 (64) (-x32)" VIDEO_CARDS="(-freedreno) -i915 -i965 -intel -iris (-lima) -nouveau (-panfrost) -r100 -r200 -r300 -r600 -radeon -radeonsi (-vc4) -virgl (-vivante) -vmware"

_________________
Desktop AMD FX-4300 18GB RAM, Asus GF GTX 660. Sound: RME Multiface 20 Kanal + envy24 6 Kanal Soundkarte
Raspberry Pi 1 + 2 + 3B+ + Zero W
Stratux + Skydemon
Back to top
View user's profile Send private message
Josef.95
Advocate
Advocate


Joined: 03 Sep 2007
Posts: 3809
Location: Germany

PostPosted: Wed May 13, 2020 10:21 pm    Post subject: Reply with quote

Erdie wrote:
Ich frage mich ob diese Problem durch Löschen von eselect-opencl gelöst werden kann [...]

Nee, eher nicht, aber mit >=nvidia-drivers-440.82-r1
sollte es klappen. (stable =nvidia-drivers-440.82 ist mit dem neuen OpenCL Kram noch nicht kompatibel).

Falls du das Update machst, dann beachte nach dem deinstallieren von app-eselect/eselect-opencl bitte auch den Rat aus https://www.gentoo.org/support/news-items/2020-04-22-opencl-upgrade-file-collisions.html
Und, beachte das für funktionierendes OpenCL mit nvidia-drivers das uvm.ko Modul benötigt wird -- das bekommst du indem das nvidia-drivers Paket mit USE=uvm gebaut wird.
Back to top
View user's profile Send private message
Erdie
Advocate
Advocate


Joined: 20 May 2004
Posts: 2066
Location: Heidelberg - Germany

PostPosted: Thu May 14, 2020 6:56 am    Post subject: Reply with quote

Danke, das wars. Der merge läuft gerade. Wie ist das mit dem opencl, kann ich das irgendwie sinnvoll nutzen? Ich verwende ab und zu kdenlive und das ist beim rendern sehr langsam. Soweit ist verstanden habe, gibt es da auch keine opencl Unterstützung. Es ist vielleicht hier off-topic aber ich erlaube mir mal zu fragen: Wer oder was profitiert denn davon?
_________________
Desktop AMD FX-4300 18GB RAM, Asus GF GTX 660. Sound: RME Multiface 20 Kanal + envy24 6 Kanal Soundkarte
Raspberry Pi 1 + 2 + 3B+ + Zero W
Stratux + Skydemon
Back to top
View user's profile Send private message
flammenflitzer
Advocate
Advocate


Joined: 25 Nov 2003
Posts: 3183
Location: Berlin

PostPosted: Fri May 15, 2020 3:41 pm    Post subject: Reply with quote

Da gucke ich mit meiner GeForce GTX 560 Ti dumm aus der Wäsche. Der letzte unterstützte Treiber ist x11-drivers/nvidia-drivers-391.0.0. Ich kann also die Abhängigkeiten nicht auflösen. :(
Back to top
View user's profile Send private message
Josef.95
Advocate
Advocate


Joined: 03 Sep 2007
Posts: 3809
Location: Germany

PostPosted: Fri May 15, 2020 8:25 pm    Post subject: Reply with quote

flammenflitzer wrote:
Da gucke ich mit meiner GeForce GTX 560 Ti dumm aus der Wäsche. Der letzte unterstützte Treiber ist x11-drivers/nvidia-drivers-391.0.0. Ich kann also die Abhängigkeiten nicht auflösen. :(

Sollte mit der =x11-drivers/nvidia-drivers-390.132-r2 Version gehen. Setze für diese Version aber bitte USE=-libglvnd global in der make.conf
(libglvnd wird von dieser Treiberversion nicht wirklich unterstützt, daher disable das Flag am besten. Sollte aber dennoch mit dem altbewährten eselect-opengl noch fein funktionieren -- siehe dazu auch im Bug 713546
Back to top
View user's profile Send private message
flammenflitzer
Advocate
Advocate


Joined: 25 Nov 2003
Posts: 3183
Location: Berlin

PostPosted: Sat May 16, 2020 6:09 am    Post subject: Reply with quote

Ist bei mir eingetragen.
Code:
[blocks B      ] app-eselect/eselect-opencl ("app-eselect/eselect-opencl" is blocking dev-libs/ocl-icd-2.2.12-r3, dev-util/opencl-headers-2020.03.13-r1)
Back to top
View user's profile Send private message
Josef.95
Advocate
Advocate


Joined: 03 Sep 2007
Posts: 3809
Location: Germany

PostPosted: Sat May 16, 2020 8:46 am    Post subject: Reply with quote

flammenflitzer,
dann schaue bitte mal nach den reverse dependencies via
Code:
emerge -av --depclean app-eselect/eselect-opencl
daraus sollte ersichtlich sein welches installierte Paket es noch braucht.
Back to top
View user's profile Send private message
flammenflitzer
Advocate
Advocate


Joined: 25 Nov 2003
Posts: 3183
Location: Berlin

PostPosted: Sun May 17, 2020 7:24 am    Post subject: Reply with quote

Code:
equery depends eselect-opencl
 * These packages depend on eselect-opencl:
x11-drivers/nvidia-drivers-390.132-r1 (app-eselect/eselect-opencl)
Code:
emerge -av --depclean app-eselect/eselect-opencl

Calculating dependencies... done!
  app-eselect/eselect-opencl-1.1.0-r4 pulled in by:
    x11-drivers/nvidia-drivers-390.132-r1 requires app-eselect/eselect-opencl
Back to top
View user's profile Send private message
Josef.95
Advocate
Advocate


Joined: 03 Sep 2007
Posts: 3809
Location: Germany

PostPosted: Sun May 17, 2020 9:41 am    Post subject: Reply with quote

flammenflitzer,
Code:
x11-drivers/nvidia-drivers-390.132-r1 requires app-eselect/eselect-opencl

jo, du brauchst die -r2 Revision.
Back to top
View user's profile Send private message
flammenflitzer
Advocate
Advocate


Joined: 25 Nov 2003
Posts: 3183
Location: Berlin

PostPosted: Sun May 17, 2020 12:36 pm    Post subject: Reply with quote

Danke. Habe ich nicht mitbekommen, das es da eine neuere Version gibt. Als Porthole noch verfügbar war, hätte ich das sofort gesehen. :wink: Schade, das es das nicht mehr gibt..... Auch schade, das es kein ordentliches GUI für die Paketverwaltung gibt. (kuroo ist für mich zu unübersichtlich)
Back to top
View user's profile Send private message
flammenflitzer
Advocate
Advocate


Joined: 25 Nov 2003
Posts: 3183
Location: Berlin

PostPosted: Sun May 24, 2020 5:25 pm    Post subject: Reply with quote

Ich kann jetzt weder app-eselect/eselect-opencl noch app-eselect/eselect-opengl installieren. Wie kann ich jetzt umschalten?
Code:
# emerge app-eselect/eselect-opengl -pv                         

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild  N     ] app-eselect/eselect-opengl-1.3.1-r4::gentoo  3 KiB
[blocks B      ] app-eselect/eselect-opengl ("app-eselect/eselect-opengl" is blocking x11-drivers/nvidia-drivers-390.132-r2, x11-base/xorg-server-1.20.7, media-libs/mesa-19.3.5)
Code:
emerge app-eselect/eselect-opencl -pv

These are the packages that would be merged, in order:

Calculating dependencies... done!
[ebuild  N     ] app-eselect/eselect-opencl-1.1.0-r4::gentoo  0 KiB
[blocks B      ] app-eselect/eselect-opencl ("app-eselect/eselect-opencl" is blocking dev-util/opencl-headers-2020.03.13-r1, dev-libs/ocl-icd-2.2.12-r3)

Total: 1 package (1 new), Size of downloads: 0 KiB
Conflict: 1 block (1 unsatisfied)

 * Error: The above package list contains packages which cannot be
 * installed at the same time on the same system.

  (app-eselect/eselect-opencl-1.1.0-r4:0/0::gentoo, ebuild scheduled for merge) pulled in by
    app-eselect/eselect-opencl

  (dev-libs/ocl-icd-2.2.12-r3:0/0::gentoo, installed) pulled in by
    dev-libs/ocl-icd[khronos-headers,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_riscv_lp64d(-)?,abi_riscv_lp64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (dev-libs/ocl-icd[khronos-headers,abi_x86_32(-),abi_x86_64(-)]) required by (virtual/opencl-3-r1:0/0::gentoo, installed) USE="" ABI_X86="32 (64) (-x32)"
    dev-libs/ocl-icd[khronos-headers,abi_x86_32(-)?,abi_x86_64(-)?,abi_x86_x32(-)?,abi_mips_n32(-)?,abi_mips_n64(-)?,abi_mips_o32(-)?,abi_riscv_lp64d(-)?,abi_riscv_lp64(-)?,abi_s390_32(-)?,abi_s390_64(-)?] (dev-libs/ocl-icd[khronos-headers,abi_x86_32(-),abi_x86_64(-)]) required by (media-libs/mesa-19.3.5:0/0::gentoo, installed) USE="X classic dri3 egl gallium gbm gles1 gles2 libglvnd llvm opencl osmesa vdpau wayland xa xvmc -d3d9 -debug -lm-sensors -pax_kernel (-selinux) -test -unwind -vaapi -valgrind -vulkan -vulkan-overlay" ABI_X86="32 (64) (-x32)" VIDEO_CARDS="(-freedreno) -i915 -i965 -intel -iris (-lima) -nouveau (-panfrost) -r100 -r200 -r300 -r600 -radeon -radeonsi (-vc4) -virgl (-vivante) -vmware"
Ersetzt libglvnd eselect-opengl? https://forums.gentoo.org/viewtopic-t-1110108-start-0.html https://forums.gentoo.org/viewtopic-p-8428194.html
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Deutsches Forum (German) All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum