Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
HOWTO: qmail vpopmail qmail-scanner courier squirrelmail
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 12, 13, 14, 15, 16, 17  Next  
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 555
Location: Halle (Saale), Germany

PostPosted: Wed Apr 07, 2004 2:00 pm    Post subject: Reply with quote

nianderson wrote:
dang
well i used the doc from gentoo documentation and got a successful install.
was working fine for several days
added some accounts with qmailadmin today and now all email i send gets bounced back saying the user is over quota.

but no quotas are set.

need soem help please


is smtpAUTH working ????
Where is the difference in the config file ??

Any ideas
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 555
Location: Halle (Saale), Germany

PostPosted: Wed Apr 07, 2004 2:04 pm    Post subject: Reply with quote

biex wrote:
When i run this "command"

Code:
/etc/init.d/courier-pop3d start


i get a error

Code:
 * Starting courier-pop3d...
bind: Address already in use
ll_daemon_start: Resource temporarily unavailable 


What to do??? HELP!

Can only send email right now not get... is it because of that or is it something else?

Thanks!


do a
Code:
netstat -ntulp
or
Code:
netstat -p -a --numeric-ports
and look which prog is running on the port required by pop3d (25).
Terminate this prog and start pop3d.
_________________
-->Please add [solved] to the initial post's subject line if you feel your problem is resolved.
-->Help answer the unanswered

http://olausson.de
Back to top
View user's profile Send private message
Skywacker
n00b
n00b


Joined: 23 Jan 2004
Posts: 72
Location: Missouri

PostPosted: Wed Apr 07, 2004 2:25 pm    Post subject: Reply with quote

nianderson wrote:
dang
well i used the doc from gentoo documentation and got a successful install.
was working fine for several days
added some accounts with qmailadmin today and now all email i send gets bounced back saying the user is over quota.

but no quotas are set.

need soem help please



Quotas get set by default with this howto. Not sure where/why this is done, and yes it can be a pain to remember to remove people's quota's.

In any case, verify that there is a quota on the account with

/var/vpopmail/bin/vuserinfo email@account.com

and remove the quota with

/var/vpopmail/bin/vsetuserquota email@account.com NOQUOTA
Back to top
View user's profile Send private message
Skywacker
n00b
n00b


Joined: 23 Jan 2004
Posts: 72
Location: Missouri

PostPosted: Wed Apr 07, 2004 2:31 pm    Post subject: Reply with quote

blubbi wrote:
I thing you are missunderstanding a thing.

Everybody who install vpopmail wants to supply mailaccounts which are not systemaccounts.
If you just want to provide mail to users who have an systemaccount, install qmail without vpopmail.
Than you mail will end up in /home/user/.maildir or something similar ...


I agree with Blubbi. (only ditto-ing cuz my name was asked for an answer).

Vpopmail is for virtual accounts, not system accounts . I never have used system accounts for mail. If anything I would just create a .qmail file in the user directory to forward the local mail to my virtual account.

_skywacker
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 555
Location: Halle (Saale), Germany

PostPosted: Wed Apr 07, 2004 5:08 pm    Post subject: Reply with quote

Skywacker wrote:
nianderson wrote:
dang
well i used the doc from gentoo documentation and got a successful install.
was working fine for several days
added some accounts with qmailadmin today and now all email i send gets bounced back saying the user is over quota.

but no quotas are set.

need soem help please



Quotas get set by default with this howto. Not sure where/why this is done, and yes it can be a pain to remember to remove people's quota's.

In any case, verify that there is a quota on the account with

/var/vpopmail/bin/vuserinfo email@account.com

and remove the quota with

/var/vpopmail/bin/vsetuserquota email@account.com NOQUOTA


QUOTAS can be set or unset with qmailadmin (latest version)
_________________
-->Please add [solved] to the initial post's subject line if you feel your problem is resolved.
-->Help answer the unanswered

http://olausson.de
Back to top
View user's profile Send private message
IWBCMAN
Guru
Guru


Joined: 25 Jun 2002
Posts: 474

PostPosted: Thu Apr 08, 2004 7:02 pm    Post subject: Reply with quote

blubbi, skywalker, other GODS who grasp qmail/vpopmail....


yup you were right-I must have had my brain shutdown when I embarked on the tedious process of getting qmail and vpopmail installed....

OK. Now that I *grok* that vpopmail is only for virtual mail-what does this mean ?

a) can I also have a local(system) mail agent setup -parallel to the qmail-vpopmail thingie ?

b) if so can I use qmail for this or must I install some other mail package for local (system) mail ?

c) beyond getting local(system) mail up and running - I *would* like to use qmail/vpopmail for hosting my own email address/server- I have dynamic dns(dyndns) configured and am running ddclient which automatically ties iwbcman.homelinux.org to my apache2 server- can qmail/vpopmail be configured to allow me to recieve and send email from this address ?

Ultimately I would like to :
a) have local(system) mail up and running
b) like to use my dnyns domain for sending and recieving emails
c) I would like to be able to use a web browser from another location to browse my local (system) email and my virtual domain email(hopefully I can tie a vpopmail virtual domain to a dyndns email server)

Ok. now the confusion should be complete...


It must be obvious how much I am *suffering* from confusion -if you, or someone else, could offer some hints, tips etc. it would be greatly appreciated...

thanks
Back to top
View user's profile Send private message
Pardok
n00b
n00b


Joined: 30 Mar 2004
Posts: 29

PostPosted: Thu Apr 08, 2004 8:21 pm    Post subject: Reply with quote

Has anyone figured out the authentication problem?

I've read through this entire topic and couldn't find an answer.

I've followed the entire How-To several times.....and have everything working.

I can *send* mail through smtp but I cannot receive mail.

Using K-mail, I log into courier-pop3d only to get an authentication denial "User or Password is wrong." I've used the user login and the user@domain.com login iterations. Nothing.

Squirrelmail gives me the same error, as does courier-imapd......

I'm pulling my hairout here. I've done the suggested change from Maildir to .maildir in the .confs......and have run the script many times.

What is causing the auth error?

In my daemonrc I'm using vchkpwd as the only AUTHMODULELIST......etc. But can't get any authentication.

Is there any suggestions on how people have solved this? I have no clue where to being.

Thanks in advance for any replies. :D
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 555
Location: Halle (Saale), Germany

PostPosted: Fri Apr 09, 2004 1:59 pm    Post subject: Reply with quote

IWBCMAN wrote:
blubbi, skywalker, other GODS who grasp qmail/vpopmail....


yup you were right-I must have had my brain shutdown when I embarked on the tedious process of getting qmail and vpopmail installed....

OK. Now that I *grok* that vpopmail is only for virtual mail-what does this mean ?

a) can I also have a local(system) mail agent setup -parallel to the qmail-vpopmail thingie ?

Qmail _is_ your local mailsystem. If you associate "local mailsystem" as a system, where system accounts are mailaccounts you just have to uninstall vpopmail.
Quote:

b) if so can I use qmail for this or must I install some other mail package for local (system) mail ?

You can use qmail for this. Uninstall vpopmail and qmail will use the sytemaccounts as mailaccounts and deliver mails to ~/.maildir. If you would like to use vpopmail, just create a the desired maildomain (for example your dyndns name) with vadddomain an add to this domain as many as users you want with vadduser
Quote:

c) beyond getting local(system) mail up and running - I *would* like to use qmail/vpopmail for hosting my own email address/server- I have dynamic dns(dyndns) configured and am running ddclient which automatically ties iwbcman.homelinux.org to my apache2 server- can qmail/vpopmail be configured to allow me to recieve and send email from this address ?

local or not ... qmail/vpopmail is a mailserver, if you hav a mailserver up an running, this mailserver is your local mailserver, and if you are not at home, and your server is connected to the internet, its a mailserver which, depending on your configuration, accepts mail from everywhere.
Quote:

Ultimately I would like to :
a) have local(system) mail up and running

Install qmail
Quote:

b) like to use my dnyns domain for sending and recieving emails

Install qmail
Quote:

c) I would like to be able to use a web browser from another location to browse my local (system) email and my virtual domain email(hopefully I can tie a vpopmail virtual domain to a dyndns email server)

install squirrelmail or sqwebmail, or any other webbased mailclient to get a webinterface running on your server
Quote:

Ok. now the confusion should be complete...


It must be obvious how much I am *suffering* from confusion -if you, or someone else, could offer some hints, tips etc. it would be greatly appreciated...

thanks


Hope I could help to unconfuse you
_________________
-->Please add [solved] to the initial post's subject line if you feel your problem is resolved.
-->Help answer the unanswered

http://olausson.de
Back to top
View user's profile Send private message
vcihon
Tux's lil' helper
Tux's lil' helper


Joined: 19 Aug 2003
Posts: 107

PostPosted: Thu Apr 15, 2004 12:44 am    Post subject: Reply with quote

First of all, a BIG thank you to everyone who has contributed to this topic (and the others for that matter!) - it was a huge help and greatly appreciated!!!!

I have followed this forum, Blubbi's docs and the Howto from the Gentoo Docs. However I still have two issues:

1. My pop3 auth is working (I can login and check email from a pop3 client) and vpopmail is working fine with the database (domain and users are created). However, email is being delivered to a local user instead of the virtual one. Furthermore, when I try to send it to a virtual user that doesn't have a local account, it gets rejected. What should I look for so that all mail gets sent to the /var/vpopmail/domain/<name>/<user>/.maildir and not the local user? Also, I assume this means that vpopmail isn't truly working since my other virtual user without the local account can't recieve email? Does the user have to be added to the qmail users too?

2. Why does
Code:
/var/vpopmail/bin/vuserinfo <username>
return
Code:
no such user as <username>
. I can see the user made in the sql database just fine.

3. From the Gentoo Howto - when I type:
Code:
# printf "postmaster@wh0rd.org\0postpass\0blah\0" | vchkpw `which id` 3<&0

I do not get anything returned. What should I do?

I have a feeling all of these things are related. . . ya think? :oops:
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 555
Location: Halle (Saale), Germany

PostPosted: Thu Apr 15, 2004 10:49 am    Post subject: Reply with quote

vcihon wrote:
First of all, a BIG thank you to everyone who has contributed to this topic (and the others for that matter!) - it was a huge help and greatly appreciated!!!!

I have followed this forum, Blubbi's docs and the Howto from the Gentoo Docs. However I still have two issues:

1. My pop3 auth is working (I can login and check email from a pop3 client) and vpopmail is working fine with the database (domain and users are created). However, email is being delivered to a local user instead of the virtual one. Furthermore, when I try to send it to a virtual user that doesn't have a local account, it gets rejected. What should I look for so that all mail gets sent to the /var/vpopmail/domain/<name>/<user>/.maildir and not the local user? Also, I assume this means that vpopmail isn't truly working since my other virtual user without the local account can't recieve email? Does the user have to be added to the qmail users too?

I guess you installed vpopmail befor qmail .... ahve a look in /var/qmail/users/ if the etries in the files there point to your virtual domains/users
Quote:

2. Why does
Code:
/var/vpopmail/bin/vuserinfo <username>
return
Code:
no such user as <username>
. I can see the user made in the sql database just fine.

try 'vuserinfo user@fqdn'
Quote:

3. From the Gentoo Howto - when I type:
Code:
# printf "postmaster@wh0rd.org\0postpass\0blah\0" | vchkpw `which id` 3<&0

I do not get anything returned. What should I do?

No Idea, sorry
Quote:

I have a feeling all of these things are related. . . ya think? :oops:


Good luck
_________________
-->Please add [solved] to the initial post's subject line if you feel your problem is resolved.
-->Help answer the unanswered

http://olausson.de
Back to top
View user's profile Send private message
vcihon
Tux's lil' helper
Tux's lil' helper


Joined: 19 Aug 2003
Posts: 107

PostPosted: Thu Apr 15, 2004 12:02 pm    Post subject: Reply with quote

Thanks for the reply.

Quote:
I guess you installed vpopmail befor qmail .... ahve a look in /var/qmail/users/ if the etries in the files there point to your virtual domains/users


This was a fresh install and I followed the instructions so I install qmail before vpopmail. Here is the contents for /var/qmail/users:

Code:
tolkien users # ls -l
total 8
-rw-r--r--    1 root     root           93 Apr 12 04:21 assign
-rw-------    1 root     root            0 Apr 12 04:21 assign.lock
-rw-r--r--    1 root     root         2185 Apr 12 04:21 cdb
tolkien users # cat assign
+alextechstudio.com-:alextechstudio.com:89:89:/var/vpopmail/domains/alextechstudio.com:-::
.
tolkien users # cat cdb
D!alextechstudio.com-:alextechstudio.com:89:89:/var/vpopmail/domains/alextechstudio.com:-::


I assume this is correct?
BTW, the user@fqdn fixed the vuserinfo. Thanks.
Back to top
View user's profile Send private message
Pardok
n00b
n00b


Joined: 30 Mar 2004
Posts: 29

PostPosted: Thu Apr 15, 2004 8:02 pm    Post subject: Reply with quote

Blubbi, Sabrex, Anyone,

please help!

I've followed Blubbi's How-To to the letter. Everything seems to be running fine. I am able to setup email accounts with Qmail admin and such.

However, I CANNOT LOG IN AS A USER. The username and password ARE correct (even identitical to /etc/passwd).

To test out my configuration, I sent an e-mail to a newly created user as root@mydomain.com using mutt.

The mail is sitting in the users Vpopmail account, but I cannot retrieve it. Squirrelmail, Kmail, even Mutt give me a "Unknown user or bad password." error whenever I try to login.

I don't know what's wrong!

Here's my Authdamonrc:

Code:

##VERSION: $Id: authdaemonrc.in,v 1.8 2001/10/07 02:16:22 mrsam Exp $
#
# Copyright 2000-2001 Double Precision, Inc.  See COPYING for
# distribution information.
#
# authdaemonrc created from authdaemonrc.dist by sysconftool
#
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
#
# This file configures authdaemond, the resident authentication daemon.
#
# Comments in this file are ignored.  Although this file is intended to
# be sourced as a shell script, authdaemond parses it manually, so
# the acceptable syntax is a bit limited.  Multiline variable contents,
# with the \ continuation character, are not allowed.  Everything must
# fit on one line.  Do not use any additional whitespace for indentation,
# or anything else.

##NAME: authmodulelist:0
#
# The authentication modules that are linked into authdaemond.  The
# default list is installed.  You may selectively disable modules simply
# by removing them from the following list.  The available modules you
# can use are: authcustom authcram authuserdb authvchkpw authmysql authpam

authmodulelist="authvchkpw"

##NAME: authmodulelistorig:1
#
# This setting is used by Courier's webadmin module, and should be left
# alone

authmodulelistorig="authcustom authcram authuserdb authvchkpw authmysql authpam"

##NAME: daemons:0
#
# The number of daemon processes that are started.  authdaemon is typically
# installed where authentication modules are relatively expensive: such
# as authldap, or authmysql, so it's better to have a number of them running.
# PLEASE NOTE:  Some platforms may experience a problem if there's more than
# one daemon.  Specifically, SystemV derived platforms that use TLI with
# socket emulation.  I'm suspicious of TLI's ability to handle multiple
# processes accepting connections on the same filesystem domain socket.
#
# You may need to increase daemons if as your system load increases.  Symptoms
# include sporadic authentication failures.  If you start getting
# authentication failures, increase daemons.  However, the default of 5
# SHOULD be sufficient.  Bumping up daemon count is only a short-term
# solution.  The permanent solution is to add more resources: RAM, faster
# disks, faster CPUs...

daemons=5

##NAME: version:0
#
# When you have multiple versions of authdaemond.* installed, authdaemond
# just picks the first one it finds.  Set "version" to override that.
# For example:  version=authdaemond.plain

version=""

##NAME: authdaemonvar:0
#
# authdaemonvar is here, but is not used directly by authdaemond.  It's
# used by various configuration and build scripts, so don't touch it!

authdaemonvar=/var/lib/courier-imap/authdaemon
authmodulelist="${authmodulelist} relay-ctrl-allow"


and here's my qmail-smtpd:

Code:
# Configuration file for qmail-smtpd
# $Header: /home/cvsroot/gentoo-x86/net-mail/qmail/files/conf-smtpd,v 1.1 2003/11/30 11:32:06 robbat2 Exp $

# Stuff to run before tcpserver
#QMAIL_TCPSERVER_PRE=""
# Stuff to run qmail-smtpd
#QMAIL_SMTP_PRE=""
# Stuff to after qmail-smtpd
#QMAIL_SMTP_POST=""

# this turns off the IDENT grab attempt on connecting
TCPSERVER_OPTS="${TCPSERVER_OPTS} -R"

# You might want to use rblsmtpd with this, but you need to fill in a RBL server here first
# see http://cr.yp.to/ucspi-tcp/rblsmtpd.html for more details
#QMAIL_SMTP_PRE="${QMAIL_SMTP_PRE} rblsmtpd -r RBL-SERVER"

# If you are interested in providing POP or IMAP before SMTP type relaying,
# emerge relay-ctrl, then uncomment the next 2 lines
QMAIL_TCPSERVER_PRE="${QMAIL_TCPSERVER_PRE} envdir /etc/relay-ctrl relay-ctrl-chdir"
QMAIL_SMTP_PRE="${QMAIL_SMTP_PRE} relay-ctrl-check"
# In /etc/courier-imap/authdaemonrc add the next line to the end:
#authmodulelist="${authmodulelist} relay-ctrl-allow"
# Then in /etc/courier-imap/{imapd,imapd-ssl,pop3d,pop3d-ssl}
# Add this at the end
#PRERUN="${PRERUN} envdir /etc/relay-ctrl relay-ctrl-chdir"

# This next block is for SMTP-AUTH
# This provides the LOGIN, PLAIN and CRAM-MD5 types
# the 'cmd5checkpw' used in $QMAIL_SMTP_AUTHCHECKPASSWORD supports CRAM-MD5
# and reads it's data from /etc/poppasswd
# see the manpage for cmd5checkpw for details on the passwords
# uncomment the next four lines to enable SMTP-AUTH
QMAIL_SMTP_AUTHHOST=$(<${QMAIL_CONTROLDIR}/me)
[ -z "${QMAIL_SMTP_POST}" ] && QMAIL_SMTP_POST=/bin/true
#QMAIL_SMTP_CHECKPASSWORD="/bin/cmd5checkpw"
QMAIL_SMTP_CHECKPASSWORD="/var/vpopmail/bin/vchkpw"
QMAIL_SMTP_POST="${QMAIL_SMTP_AUTHHOST} ${QMAIL_SMTP_CHECKPASSWORD} ${QMAIL_SMTP_POST}"


I don't know what I'm doing wrong!

Also, I'm using No-Ip.com to run a virtual host called enon.no-ip.org.

Could this possibly have any effect? I did add the domain through ./vadddomain and typing in the domain name does send me to the correct address.

But my mail isn't working. Any advice or help?
Back to top
View user's profile Send private message
vcihon
Tux's lil' helper
Tux's lil' helper


Joined: 19 Aug 2003
Posts: 107

PostPosted: Thu Apr 15, 2004 8:15 pm    Post subject: Reply with quote

Pardok -

How have you entered your username in your mail client?

Are you typing just

<username>

or are you typing
<username>@domainname.com

The second is the correct username because it is a vitual domain.
Back to top
View user's profile Send private message
Pardok
n00b
n00b


Joined: 30 Mar 2004
Posts: 29

PostPosted: Thu Apr 15, 2004 9:45 pm    Post subject: Reply with quote

Yeah, see, the problem here is that I'm a complete moron. :oops:

Thanks......sorry for the stupid question. :D
Back to top
View user's profile Send private message
Pardok
n00b
n00b


Joined: 30 Mar 2004
Posts: 29

PostPosted: Fri Apr 16, 2004 5:29 am    Post subject: Reply with quote

Ok, me again.

I got everything working perfectly. I could send AND receive using Blubbi's How-To (as a sidenote, thank you so much Blubbi)

However, when I restart the server, I face the authentication error again. Squirrelmail gives me the Unknown user or password error, K-mail says password is incorrect, etc.

It was working before, but when I restart, it doesn't.

I have the feeling something isn't starting up at boot....but I can't figure out what. I went through the How-To again, trying to restart services, but nothing worked.

Anyone else face this problem or figured out how to fix it?

Thanks.

Here's the output from ps -ef:

Code:
root@mail qmail-smtpd # ps -ef
UID        PID  PPID  C STIME TTY          TIME CMD
root         1     0  0 23:15 ?        00:00:04 init [3]
root         2     1  0 23:15 ?        00:00:00 [ksoftirqd/0]
root         3     1  0 23:15 ?        00:00:00 [events/0]
root         4     3  0 23:15 ?        00:00:00 [kblockd/0]
root         5     3  0 23:15 ?        00:00:00 [pdflush]
root         6     3  0 23:15 ?        00:00:00 [pdflush]
root         8     3  0 23:15 ?        00:00:00 [aio/0]
root         7     1  0 23:15 ?        00:00:00 [kswapd0]
root         9     1  0 23:15 ?        00:00:00 [jfsIO]
root        10     1  0 23:15 ?        00:00:00 [jfsCommit]
root        11     1  0 23:15 ?        00:00:00 [jfsSync]
root        12     3  0 23:15 ?        00:00:00 [xfslogd/0]
root        13     3  0 23:15 ?        00:00:00 [xfsdatad/0]
root        14     1  0 23:15 ?        00:00:00 [xfsbufd]
root        15     1  0 23:15 ?        00:00:00 [kseriod]
root       148     1  0 23:15 ?        00:00:00 [khubd]
root       332     1  0 23:15 ?        00:00:00 [khpsbpkt]
root       385     1  0 23:15 ?        00:00:00 [knodemgrd_0]
root       495     3  0 23:15 ?        00:00:00 [reiserfs/0]
root       626     1  0 23:15 ?        00:00:00 /sbin/devfsd /dev
root      3931     1  0 23:16 ?        00:00:00 /usr/sbin/syslog-ng
root      4984     1  0 23:16 ?        00:00:00 /usr/sbin/apache2 -k start -D SS
clamav    5088     1  0 23:16 ?        00:00:00 /usr/bin/freshclam -d -c 2 -l /v
root      5163     1  0 23:16 ?        00:00:00 /usr/lib/courier-imap/authlib/au
root      5164  5163  0 23:16 ?        00:00:00 /usr/lib/courier-imap/authlib/au
root      5165  5163  0 23:16 ?        00:00:00 /usr/lib/courier-imap/authlib/au
root      5166  5163  0 23:16 ?        00:00:00 /usr/lib/courier-imap/authlib/au
root      5174  5163  0 23:16 ?        00:00:00 /usr/lib/courier-imap/authlib/au
root      5175  5163  0 23:16 ?        00:00:00 /usr/lib/courier-imap/authlib/au
root      5195     1  0 23:16 ?        00:00:00 /usr/lib/courier-imap/couriertcp
root      5197     1  0 23:16 ?        00:00:00 /usr/lib/courier-imap/courierlog
root      5252     1  0 23:16 ?        00:00:00 /usr/lib/courier-imap/couriertcp
root      5264     1  0 23:16 ?        00:00:00 /usr/lib/courier-imap/courierlog
root      5300     1  0 23:16 ?        00:00:00 /usr/sbin/cupsd
vpopmail  5301  4984  0 23:16 ?        00:00:00 /usr/sbin/apache2 -k start -D SS
vpopmail  5311  4984  0 23:16 ?        00:00:00 /usr/sbin/apache2 -k start -D SS
vpopmail  5312  4984  0 23:16 ?        00:00:00 /usr/sbin/apache2 -k start -D SS
vpopmail  5313  4984  0 23:16 ?        00:00:00 /usr/sbin/apache2 -k start -D SS
vpopmail  5314  4984  0 23:16 ?        00:00:00 /usr/sbin/apache2 -k start -D SS
vpopmail  5315  4984  0 23:16 ?        00:00:00 /usr/sbin/apache2 -k start -D SS
privoxy   5648     1  0 23:16 ?        00:00:00 /usr/sbin/privoxy /etc/privoxy/c
root      5649     1  0 23:16 ?        00:00:00 /usr/sbin/smbd
root      5651     1  0 23:16 ?        00:00:00 /usr/sbin/nmbd
root      6194     1  0 23:16 ?        00:00:00 /usr/sbin/cron
root      6240     1  0 23:16 ?        00:00:00 /usr/bin/perl /usr/libexec/webmi
xfs       6431     1  0 23:16 ?        00:00:00 /usr/X11R6/bin/xfs -daemon -conf
root      6468     1  0 23:16 tty1     00:00:00 /sbin/agetty 38400 tty1 linux
root      6469     1  0 23:16 tty2     00:00:00 /sbin/agetty 38400 tty2 linux
root      6470     1  0 23:16 tty3     00:00:00 /sbin/agetty 38400 tty3 linux
root      6471     1  0 23:16 tty4     00:00:00 /sbin/agetty 38400 tty4 linux
root      6472     1  0 23:16 tty5     00:00:00 /sbin/agetty 38400 tty5 linux
root      6473     1  0 23:16 tty6     00:00:00 /sbin/agetty 38400 tty6 linux
root      6490     1  0 23:16 ?        00:00:00 /usr/kde/3.2/bin/kdm
root      6493  6490  3 23:16 ?        00:00:23 /etc/X11/X -nolisten tcp vt7 -au
root      6494  6490  0 23:16 ?        00:00:00 -:0
doug      6567  6494  0 23:16 ?        00:00:00 /bin/sh --login /usr/kde/3.2/bin
doug      6597     1  0 23:16 ?        00:00:00 kdeinit: Running...
doug      6600     1  0 23:16 ?        00:00:00 kdeinit: dcopserver --nosid
doug      6602  6597  0 23:16 ?        00:00:00 kdeinit: klauncher
doug      6605     1  0 23:16 ?        00:00:00 kdeinit: kded
doug      6637  6597  0 23:16 ?        00:00:01 //usr/kde/3.2/bin/artsd -F 8 -S
doug      6639     1  0 23:16 ?        00:00:00 kdeinit: knotify
doug      6643  6567  0 23:16 ?        00:00:00 kwrapper ksmserver
doug      6645     1  0 23:16 ?        00:00:00 kdeinit: ksmserver
doug      6646  6597  0 23:16 ?        00:00:01 kdeinit: kwin -session 11c0a8006
doug      6648     1  0 23:16 ?        00:00:00 kdeinit: kdesktop
doug      6650  6597  0 23:16 ?        00:00:00 kdeinit: kio_file file /tmp/ksoc
doug      6651     1  0 23:16 ?        00:00:00 kdeinit: kicker
doug      6654     1  0 23:16 ?        00:00:00 kdeinit: klipper
doug      6657     1  0 23:16 ?        00:00:00 kdeinit: kmix -session 11c0a8006
doug      6679     1  0 23:16 ?        00:00:00 korgac --miniicon korganizer
doug      6681     1  0 23:17 ?        00:00:00 kopete -session 11c0a80064000108
doug      6682     1  0 23:17 ?        00:00:01 kontact -session 11c0a8006400010
doug      6699  6597  0 23:17 ?        00:00:00 /bin/sh /usr/lib/mozilla/run-moz
doug      6704  6699  8 23:17 ?        00:00:59 /usr/lib/mozilla/mozilla-bin
doug      6708  6704  0 23:17 ?        00:00:00 /usr/lib/mozilla/mozilla-bin
doug      6709  6708  0 23:17 ?        00:00:00 /usr/lib/mozilla/mozilla-bin
doug      6710  6708  0 23:17 ?        00:00:00 /usr/lib/mozilla/mozilla-bin
privoxy   6716  5648  0 23:17 ?        00:00:00 /usr/sbin/privoxy /etc/privoxy/c
vpopmail  6725  4984  0 23:17 ?        00:00:00 /usr/sbin/apache2 -k start -D SS
doug      6729  6597  0 23:17 ?        00:00:00 kdeinit: konsole
doug      6730  6729  0 23:17 pts/0    00:00:00 /bin/bash
root      6755  6730  0 23:17 pts/0    00:00:00 su
root      6758  6755  0 23:17 pts/0    00:00:00 bash
vpopmail  6841     1  0 23:18 ?        00:00:00 /usr/bin/spamd -d -r /var/run/sp
root      7092     1  0 23:20 pts/0    00:00:00 /usr/bin/svscan /service
root      7097  7092  0 23:20 pts/0    00:00:00 supervise qmail-smtpd
vpopmail  7098  7097  0 23:20 pts/0    00:00:00 /usr/bin/tcpserver -H -R -v -l 0
root      7108  7092  0 23:20 pts/0    00:00:00 supervise log
qmaill    7109  7108  0 23:20 pts/0    00:00:00 /usr/bin/multilog t s2500000 n10
root      7116  7092  0 23:20 pts/0    00:00:00 supervise qmail-send
qmails    7117  7116  0 23:20 pts/0    00:00:00 qmail-send
root      7119  7092  0 23:20 pts/0    00:00:00 supervise log
qmaill    7120  7119  0 23:20 pts/0    00:00:00 /usr/bin/multilog t s2500000 n10
root      7131  7117  0 23:20 pts/0    00:00:00 qmail-lspawn |dot-forward .forwa
qmailr    7132  7117  0 23:20 pts/0    00:00:00 qmail-rspawn
qmailq    7133  7117  0 23:20 pts/0    00:00:00 qmail-clean
vpopmail  7169  4984  0 23:22 ?        00:00:00 /usr/sbin/apache2 -k start -D SS
doug      7371  6597  0 23:24 ?        00:00:00 kdeinit: kio_imap4 imap /tmp/kso
root      7476     1  0 23:24 ?        00:00:00 /bin/sh /usr/bin/mysqld_safe
mysql     7513  7476  0 23:24 ?        00:00:00 /usr/sbin/mysqld --basedir=/usr
mysql     7514  7513  0 23:24 ?        00:00:00 /usr/sbin/mysqld --basedir=/usr
mysql     7515  7514  0 23:24 ?        00:00:00 /usr/sbin/mysqld --basedir=/usr
mysql     7516  7514  0 23:24 ?        00:00:00 /usr/sbin/mysqld --basedir=/usr
doug      7555     1  0 23:26 ?        00:00:00 /usr/bin/esd -terminate -nobeeps
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 555
Location: Halle (Saale), Germany

PostPosted: Fri Apr 16, 2004 11:48 am    Post subject: Reply with quote

Pardok wrote:
Ok, me again.

I got everything working perfectly. I could send AND receive using Blubbi's How-To (as a sidenote, thank you so much Blubbi)

However, when I restart the server, I face the authentication error again. Squirrelmail gives me the Unknown user or password error, K-mail says password is incorrect, etc.

It was working before, but when I restart, it doesn't.

I have the feeling something isn't starting up at boot....but I can't figure out what. I went through the How-To again, trying to restart services, but nothing worked.

Anyone else face this problem or figured out how to fix it?

Thanks.

Here's the output from ps -ef:



Modify the following entries in your courier config (imapd and pop3d) files:
Code:
##NAME: DEBUG_LOGIN:0
#
# Dump additional login diagnostics to syslog
#
# DEBUG_LOGIN=0   - turn off login debugging
# DEBUG_LOGIN=1   - turn on login debugging
# DEBUG_LOGIN=2   - turn on login debugging + log passwords too

DEBUG_LOGIN=2


restart courier-pop3d|imapd and restart svscan

and have a look in the following logfiles:
Code:

/var/log/mail
/var/log/qmail/qmail-smtp/current


mmmh, I have no Idea, why this souldn't work after a reboot .... for me it works even after a reboot ...

But take a look at these logfiels and report.
_________________
-->Please add [solved] to the initial post's subject line if you feel your problem is resolved.
-->Help answer the unanswered

http://olausson.de
Back to top
View user's profile Send private message
vcihon
Tux's lil' helper
Tux's lil' helper


Joined: 19 Aug 2003
Posts: 107

PostPosted: Fri Apr 16, 2004 2:42 pm    Post subject: Reply with quote

Everything is working - two more questions:


1. Can someone explain why you would use/want SMTP Auth Post Pop3?
I'm somewhat new to this (we run an Exchange server at work without Pop3 or Imap)

2. This is not directly on topic (qmail setup) but is related:
I have a test domain and a production domain. I set up the test domain with a copy of my website and qmail/vpopmail per this forum. I now want to have email and web traffic redirect from the production domain to the test domain so I don't have to redo everything. Should this be done locally with vpopmail and the use of aliases (and with Apache) or can it/should it be done on the DNS level?

Hints on how to do either scenario would be appreciated. . .
Back to top
View user's profile Send private message
Pardok
n00b
n00b


Joined: 30 Mar 2004
Posts: 29

PostPosted: Fri Apr 16, 2004 4:50 pm    Post subject: Reply with quote

Thanks for the reply Blubbi.

I'm getting the error:

Code:
Fatal: unable to bind: address not available


Very strange. Here's my host file:

Code:
127.0.0.1       localhost
192.168.0.100   mail.enon.no-ip.org     mail
# IPV6 versions of localhost and co
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts


Also, diving deeper into logs, I found this in my qmail-send current file:
Code:

@40000000408030dc29ae576c starting delivery 3: msg 1001185 to local enon.no-ip.org-doug@enon.no-ip.org
@40000000408030dc29ae5b54 status: local 2/10 remote 1/20
@40000000408030dc29ae5f3c delivery 3: deferral: Uh-oh:_home_directory_is_writable._(#4.7.0)/
@40000000408030dc3414d8fc status: local 1/10 remote 1/20
@40000000408030dc3414e0cc delivery 1: deferral: /bin/sh:_line_1:_dot-forward:_command_not_found/
@40000000408030dc3414e89c status: local 0/10 remote 1/20
@40000000408030e034acbfb4 delivery 2: deferral: Sorry,_I_wasn't_able_to_establish_an_SMTP_connection._(#4.4.1)/
@40000000408030e034acd33c status: local 0/10 remote 0/20


And netstat shows this:

Code:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 localhost:8118          localhost:32856         TIME_WAIT
tcp        0      0 mail.enon.no-ip.o:32792 205.188.8.137:5190     ESTABLISHED
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags       Type       State         I-Node Path
**CUT****
unix  3      [ ]         STREAM     CONNECTED     8773
unix  3      [ ]         STREAM     CONNECTED     8768   /tmp/mcop-doug/mail_enon_no-ip_org-1be5-408030fa
unix  3      [ ]         STREAM     CONNECTED     8767
unix  3      [ ]         STREAM     CONNECTED     8654   /tmp/.X11-unix/X0
unix  3      [ ]         STREAM     CONNECTED     8653
unix  3      [ ]         STREAM     CONNECTED     8652   /tmp/.ICE-unix/dcop7027-1082142961
***CUT****


I don't understand. It connected to the address before, but when I restart it doesn't. Any advice?


Last edited by Pardok on Fri Apr 16, 2004 7:42 pm; edited 1 time in total
Back to top
View user's profile Send private message
Naspe
Guru
Guru


Joined: 10 Dec 2003
Posts: 321
Location: Genova - Italy

PostPosted: Fri Apr 16, 2004 6:57 pm    Post subject: Reply with quote

Hi all. I followed this how-to. everything seems to work but clamav. I can't recive any emails from foreign addresses. I found this message in the qmail-queue.log in qmailscanner dir:
Code:

16/04/2004 21:01:03:24284: +++ starting debugging for process 24284 by uid=201 at 16/04/2004 21:01:03
16/04/2004 21:01:03:24284: setting UID to EUID so subprocesses can access files generated by this script
16/04/2004 21:01:03:24284: program name is qmail-scanner-queue.pl, version 1.16
16/04/2004 21:01:03:24284: incoming SMTP connection from via smtp from 193.70.192.127
16/04/2004 21:01:03:24284: w_c: mkdir /var/spool/qmailscan/caronte108214206342624284
16/04/2004 21:01:03:24284: w_c: start dumping incoming msg into /var/spool/qmailscan/working/tmp/caronte108214206342624284 [1082142063.23757]
16/04/2004 21:01:03:24284: w_c: rename new msg from /var/spool/qmailscan/working/tmp/caronte108214206342624284 to /var/spool/qmailscan/working/new/caronte108214206342624284 [1082142063.23926]
16/04/2004 21:01:03:24284: d_m: starting /usr/bin/reformime  -x/var/spool/qmailscan/caronte108214206342624284/ </var/spool/qmailscan/working/new/caronte108214206342624284 [1082142063.2395]
16/04/2004 21:01:03:24284: d_m: finished /usr/bin/reformime  -x/var/spool/qmailscan/caronte108214206342624284/ [1082142063.24512]
16/04/2004 21:01:03:24284: d_m: Checking all attachments to see if they're MS-TNEF
16/04/2004 21:01:03:24284: d_m: is /var/spool/qmailscan/caronte108214206342624284/1082142063.24286-0.caronte is a TNEF file?: 256 [1082142063.24773]
16/04/2004 21:01:03:24284: d_m: Manually unpack any zip files as some virus scanners don't do zip under Unix!
16/04/2004 21:01:03:24284: d_m: unpacking message took 0.008648 seconds
16/04/2004 21:01:03:24284: unsetting QMAILQUEUE env var
16/04/2004 21:01:03:24284: g_e_h: return-path is "naspe@libero.it", recips is "naspe@naspenet.org"
16/04/2004 21:01:03:24284: from="naspe\@libero\.it" <naspe@libero.it>,subj=Re:Prova 4, x-qmail-scanner-message-id=<HWA18H$C30CFDDC4AA42811227F7A16F63FDC2D@libero.it> via smtp from 193.70.192.127
16/04/2004 21:01:03:24284: ini_sc: start scanning
16/04/2004 21:01:03:24284: p_s: starting scan of directory "/var/spool/qmailscan/caronte108214206342624284"...
16/04/2004 21:01:03:24284: p_s:  '81:ILOVEYOU' = 'Virus-subject' = 'Love Letter Virus/Trojan'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing subject: ILOVEYOU
16/04/2004 21:01:03:24284: p_s:  '82:message/partial' = 'Virus-content-type' = 'Message/partial MIME attachments blocked by policy'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing content-type: message/partial
16/04/2004 21:01:03:24284: p_s:  '85:.{100,}' = 'Virus-date' = 'MIME Header Buffer Overflow'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing date: .{100,}
16/04/2004 21:01:03:24284: p_s:  '86:.{100,}' = 'Virus-mime-version' = 'MIME Header Buffer Overflow '
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing mime-version: .{100,}
16/04/2004 21:01:03:24284: p_s:  '87:.{100,}' = 'Virus-resent-date' = 'MIME Header Buffer Overflow'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing resent-date: .{100,}
16/04/2004 21:01:03:24284: p_s:  '90:ZVDOHYIK@yahoo.com|udtzqccc@yahoo.com|DTCELACB@yahoo.com|I1MCH2TH@yahoo.com|WPADJQ12@yahoo.com|smr@eurosport.com|bgnd2@canada.com|muwripa@fairesuivre.com|eccles@ballsy.net|S_Mentis@mail-x-change.com|YJPFJTGZ@excite.com|JGQZCD@excite.com|XHZJ3@excite.com|OZUNYLRL@excite.com|tsnlqd@excite.com|cxkawog@krovatka.net|ssdn@myrealbox.com' = 'Virus-to' = 'BadTrans Trojan exploit!'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing to: ZVDOHYIK@yahoo.com|udtzqccc@yahoo.com|DTCELACB@yahoo.com|I1MCH2TH@yahoo.com|WPADJQ12@yahoo.com|smr@eurosport.com|bgnd2@canada.com|muwripa@fairesuivre.com|eccles@ballsy.net|S_Mentis@mail-x-change.com|YJPFJTGZ@excite.com|JGQZCD@excite.com|XHZJ3@excite.com|OZUNYLRL@excite.com|tsnlqd@excite.com|cxkawog@krovatka.net|ssdn@myrealbox.com
16/04/2004 21:01:03:24284: p_s:  'eicar.com' = '69' = 'EICAR Test Virus'
16/04/2004 21:01:03:24284: p_s: type is a size!
16/04/2004 21:01:03:24284: p_s:  'happy99.exe' = '10000' = 'Happy99 Trojan'
16/04/2004 21:01:03:24284: p_s: type is a size!
16/04/2004 21:01:03:24284: p_s:  'zipped_files.exe' = '120495' = 'W32/ExploreZip.worm.pak virus'
16/04/2004 21:01:03:24284: p_s: type is a size!
16/04/2004 21:01:03:24284: p_s: skipping auto-generated file 1082142063.24286-0.caronte
16/04/2004 21:01:03:24284: p_s:  finished scan of dir "/var/spool/qmailscan/caronte108214206342624284" in 0.003264 secs
16/04/2004 21:01:03:24284: ini_sc: recursively scan the directory /var/spool/qmailscan/caronte108214206342624284/
16/04/2004 21:01:03:24284: scanloop: starting scan of directory "/var/spool/qmailscan/caronte108214206342624284"...
16/04/2004 21:01:03:24284: clamscan: starting scan of directory "/var/spool/qmailscan/caronte108214206342624284"...
16/04/2004 21:01:03:24284: run /usr/bin/clamscan -r  --tempdir=/var/spool/qmailscan/caronte108214206342624284 --disable-summary --unzip --unrar --unace --unarj --zoo --lha --jar --tar --tgz  /var/spool/qmailscan/caronte108214206342624284 2>&1
16/04/2004 21:01:03:24284: --output of clamscan was:
LibClamAV Error: readdb(): Malformed pattern line 9767 (file /var/spool/qmailscan/caronte108214206342624284/463976e312f94996/viruses.db).
LibClamAV Error: Can't gzdopen() descriptor 5
LibClamAV Error: cli_cvdload(): Can't unpack CVD file.
ERROR: CVD extraction failure.
--
16/04/2004 21:01:03:24284: tempfail: X-Qmail-Scanner-1.16: clam_scanner: corrupt or unknown ClamAV scanner error or memory/resource/perms problem - exit status 50
16/04/2004 21:04:15:24294: +++ starting debugging for process 24294 by uid=201 at 16/04/2004 21:04:15
16/04/2004 21:04:15:24294: setting UID to EUID so subprocesses can access files generated by this script
16/04/2004 21:04:15:24294: program name is qmail-scanner-queue.pl, version 1.16
16/04/2004 21:04:15:24294: incoming SMTP connection from via smtp from 216.127.66.30
16/04/2004 21:04:15:24294: w_c: mkdir /var/spool/qmailscan/caronte108214225542624294
16/04/2004 21:04:15:24294: w_c: start dumping incoming msg into /var/spool/qmailscan/working/tmp/caronte108214225542624294 [1082142255.18835]
16/04/2004 21:04:15:24294: w_c: rename new msg from /var/spool/qmailscan/working/tmp/caronte108214225542624294 to /var/spool/qmailscan/working/new/caronte108214225542624294 [1082142255.48891]
16/04/2004 21:04:15:24294: d_m: starting /usr/bin/reformime  -x/var/spool/qmailscan/caronte108214225542624294/ </var/spool/qmailscan/working/new/caronte108214225542624294 [1082142255.48928]
16/04/2004 21:04:15:24294: d_m: finished /usr/bin/reformime  -x/var/spool/qmailscan/caronte108214225542624294/ [1082142255.49481]
16/04/2004 21:04:15:24294: d_m: Checking all attachments to see if they're MS-TNEF
16/04/2004 21:04:15:24294: d_m: is /var/spool/qmailscan/caronte108214225542624294/1082142255.24297-0.caronte is a TNEF file?: 256 [1082142255.49733]
16/04/2004 21:04:15:24294: d_m: Manually unpack any zip files as some virus scanners don't do zip under Unix!
16/04/2004 21:04:15:24294: d_m: unpacking message took 0.008429 seconds
16/04/2004 21:04:15:24294: unsetting QMAILQUEUE env var
16/04/2004 21:04:15:24294: g_e_h: return-path is "naspe@nblab.net", recips is "naspe@naspenet.org"
16/04/2004 21:04:15:24294: from="Naspe" <naspe@nblab.net>,subj=fgre, x-qmail-scanner-message-id=<13074.213.155.195.224.1082141538.squirrel@www.nblab.net> via smtp from 216.127.66.30
16/04/2004 21:04:15:24294: ini_sc: start scanning
16/04/2004 21:04:15:24294: p_s: starting scan of directory "/var/spool/qmailscan/caronte108214225542624294"...
16/04/2004 21:04:15:24294: p_s:  '81:ILOVEYOU' = 'Virus-subject' = 'Love Letter Virus/Trojan'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing subject: ILOVEYOU
16/04/2004 21:04:15:24294: p_s:  '82:message/partial' = 'Virus-content-type' = 'Message/partial MIME attachments blocked by policy'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing content-type: message/partial
16/04/2004 21:04:15:24294: p_s:  '85:.{100,}' = 'Virus-date' = 'MIME Header Buffer Overflow'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing date: .{100,}
16/04/2004 21:04:15:24294: p_s:  '86:.{100,}' = 'Virus-mime-version' = 'MIME Header Buffer Overflow '
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing mime-version: .{100,}
16/04/2004 21:04:15:24294: p_s:  '87:.{100,}' = 'Virus-resent-date' = 'MIME Header Buffer Overflow'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing resent-date: .{100,}
16/04/2004 21:04:15:24294: p_s:  '90:ZVDOHYIK@yahoo.com|udtzqccc@yahoo.com|DTCELACB@yahoo.com|I1MCH2TH@yahoo.com|WPADJQ12@yahoo.com|smr@eurosport.com|bgnd2@canada.com|muwripa@fairesuivre.com|eccles@ballsy.net|S_Mentis@mail-x-change.com|YJPFJTGZ@excite.com|JGQZCD@excite.com|XHZJ3@excite.com|OZUNYLRL@excite.com|tsnlqd@excite.com|cxkawog@krovatka.net|ssdn@myrealbox.com' = 'Virus-to' = 'BadTrans Trojan exploit!'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing to: ZVDOHYIK@yahoo.com|udtzqccc@yahoo.com|DTCELACB@yahoo.com|I1MCH2TH@yahoo.com|WPADJQ12@yahoo.com|smr@eurosport.com|bgnd2@canada.com|muwripa@fairesuivre.com|eccles@ballsy.net|S_Mentis@mail-x-change.com|YJPFJTGZ@excite.com|JGQZCD@excite.com|XHZJ3@excite.com|OZUNYLRL@excite.com|tsnlqd@excite.com|cxkawog@krovatka.net|ssdn@myrealbox.com
16/04/2004 21:04:15:24294: p_s:  'eicar.com' = '69' = 'EICAR Test Virus'
16/04/2004 21:04:15:24294: p_s: type is a size!
16/04/2004 21:04:15:24294: p_s:  'happy99.exe' = '10000' = 'Happy99 Trojan'
16/04/2004 21:04:15:24294: p_s: type is a size!
16/04/2004 21:04:15:24294: p_s:  'zipped_files.exe' = '120495' = 'W32/ExploreZip.worm.pak virus'
16/04/2004 21:04:15:24294: p_s: type is a size!
16/04/2004 21:04:15:24294: p_s: skipping auto-generated file 1082142255.24297-0.caronte
16/04/2004 21:04:15:24294: p_s:  finished scan of dir "/var/spool/qmailscan/caronte108214225542624294" in 0.003187 secs
16/04/2004 21:04:15:24294: ini_sc: recursively scan the directory /var/spool/qmailscan/caronte108214225542624294/
16/04/2004 21:04:15:24294: scanloop: starting scan of directory "/var/spool/qmailscan/caronte108214225542624294"...
16/04/2004 21:04:15:24294: clamscan: starting scan of directory "/var/spool/qmailscan/caronte108214225542624294"...
16/04/2004 21:04:15:24294: run /usr/bin/clamscan -r  --tempdir=/var/spool/qmailscan/caronte108214225542624294 --disable-summary --unzip --unrar --unace --unarj --zoo --lha --jar --tar --tgz  /var/spool/qmailscan/caronte108214225542624294 2>&1
16/04/2004 21:04:15:24294: --output of clamscan was:
LibClamAV Error: readdb(): Malformed pattern line 9767 (file /var/spool/qmailscan/caronte108214225542624294/72fbb8360e9a86f9/viruses.db).
LibClamAV Error: Can't gzdopen() descriptor 5
LibClamAV Error: cli_cvdload(): Can't unpack CVD file.
ERROR: CVD extraction failure.
--
16/04/2004 21:04:15:24294: tempfail: X-Qmail-Scanner-1.16: clam_scanner: corrupt or unknown ClamAV scanner error or memory/resource/perms problem - exit status 50


What is the problem?
_________________
God Is Real... Unless Declared As Integer...

Provoca Il Più Bravo... Morirai Come Uno Schiavo!!!

Hai Evocato Il Tuono!!! Ora Raccogli Tempesta!!!
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 555
Location: Halle (Saale), Germany

PostPosted: Sat Apr 17, 2004 5:36 pm    Post subject: Reply with quote

Pardok wrote:
Thanks for the reply Blubbi.

I'm getting the error:

Code:
Fatal: unable to bind: address not available


Very strange. Here's my host file:

Code:
127.0.0.1       localhost
192.168.0.100   mail.enon.no-ip.org     mail
# IPV6 versions of localhost and co
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts


Also, diving deeper into logs, I found this in my qmail-send current file:
Code:

@40000000408030dc29ae576c starting delivery 3: msg 1001185 to local enon.no-ip.org-doug@enon.no-ip.org
@40000000408030dc29ae5b54 status: local 2/10 remote 1/20
@40000000408030dc29ae5f3c delivery 3: deferral: Uh-oh:_home_directory_is_writable._(#4.7.0)/
@40000000408030dc3414d8fc status: local 1/10 remote 1/20
@40000000408030dc3414e0cc delivery 1: deferral: /bin/sh:_line_1:_dot-forward:_command_not_found/
@40000000408030dc3414e89c status: local 0/10 remote 1/20
@40000000408030e034acbfb4 delivery 2: deferral: Sorry,_I_wasn't_able_to_establish_an_SMTP_connection._(#4.4.1)/
@40000000408030e034acd33c status: local 0/10 remote 0/20


And netstat shows this:

Code:

Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 localhost:8118          localhost:32856         TIME_WAIT
tcp        0      0 mail.enon.no-ip.o:32792 205.188.8.137:5190     ESTABLISHED
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags       Type       State         I-Node Path
**CUT****
unix  3      [ ]         STREAM     CONNECTED     8773
unix  3      [ ]         STREAM     CONNECTED     8768   /tmp/mcop-doug/mail_enon_no-ip_org-1be5-408030fa
unix  3      [ ]         STREAM     CONNECTED     8767
unix  3      [ ]         STREAM     CONNECTED     8654   /tmp/.X11-unix/X0
unix  3      [ ]         STREAM     CONNECTED     8653
unix  3      [ ]         STREAM     CONNECTED     8652   /tmp/.ICE-unix/dcop7027-1082142961
***CUT****


I don't understand. It connected to the address before, but when I restart it doesn't. Any advice?


First of all try to solve your
Code:
Fatal: unable to bind: address not available
error ... I have no clue what you have done. After you have fixed that error we will have a look at the oterh probs.
_________________
-->Please add [solved] to the initial post's subject line if you feel your problem is resolved.
-->Help answer the unanswered

http://olausson.de
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 555
Location: Halle (Saale), Germany

PostPosted: Sat Apr 17, 2004 5:43 pm    Post subject: Reply with quote

Naspe wrote:
Hi all. I followed this how-to. everything seems to work but clamav. I can't recive any emails from foreign addresses. I found this message in the qmail-queue.log in qmailscanner dir:
Code:

16/04/2004 21:01:03:24284: +++ starting debugging for process 24284 by uid=201 at 16/04/2004 21:01:03
16/04/2004 21:01:03:24284: setting UID to EUID so subprocesses can access files generated by this script
16/04/2004 21:01:03:24284: program name is qmail-scanner-queue.pl, version 1.16
16/04/2004 21:01:03:24284: incoming SMTP connection from via smtp from 193.70.192.127
16/04/2004 21:01:03:24284: w_c: mkdir /var/spool/qmailscan/caronte108214206342624284
16/04/2004 21:01:03:24284: w_c: start dumping incoming msg into /var/spool/qmailscan/working/tmp/caronte108214206342624284 [1082142063.23757]
16/04/2004 21:01:03:24284: w_c: rename new msg from /var/spool/qmailscan/working/tmp/caronte108214206342624284 to /var/spool/qmailscan/working/new/caronte108214206342624284 [1082142063.23926]
16/04/2004 21:01:03:24284: d_m: starting /usr/bin/reformime  -x/var/spool/qmailscan/caronte108214206342624284/ </var/spool/qmailscan/working/new/caronte108214206342624284 [1082142063.2395]
16/04/2004 21:01:03:24284: d_m: finished /usr/bin/reformime  -x/var/spool/qmailscan/caronte108214206342624284/ [1082142063.24512]
16/04/2004 21:01:03:24284: d_m: Checking all attachments to see if they're MS-TNEF
16/04/2004 21:01:03:24284: d_m: is /var/spool/qmailscan/caronte108214206342624284/1082142063.24286-0.caronte is a TNEF file?: 256 [1082142063.24773]
16/04/2004 21:01:03:24284: d_m: Manually unpack any zip files as some virus scanners don't do zip under Unix!
16/04/2004 21:01:03:24284: d_m: unpacking message took 0.008648 seconds
16/04/2004 21:01:03:24284: unsetting QMAILQUEUE env var
16/04/2004 21:01:03:24284: g_e_h: return-path is "naspe@libero.it", recips is "naspe@naspenet.org"
16/04/2004 21:01:03:24284: from="naspe\@libero\.it" <naspe@libero.it>,subj=Re:Prova 4, x-qmail-scanner-message-id=<HWA18H$C30CFDDC4AA42811227F7A16F63FDC2D@libero.it> via smtp from 193.70.192.127
16/04/2004 21:01:03:24284: ini_sc: start scanning
16/04/2004 21:01:03:24284: p_s: starting scan of directory "/var/spool/qmailscan/caronte108214206342624284"...
16/04/2004 21:01:03:24284: p_s:  '81:ILOVEYOU' = 'Virus-subject' = 'Love Letter Virus/Trojan'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing subject: ILOVEYOU
16/04/2004 21:01:03:24284: p_s:  '82:message/partial' = 'Virus-content-type' = 'Message/partial MIME attachments blocked by policy'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing content-type: message/partial
16/04/2004 21:01:03:24284: p_s:  '85:.{100,}' = 'Virus-date' = 'MIME Header Buffer Overflow'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing date: .{100,}
16/04/2004 21:01:03:24284: p_s:  '86:.{100,}' = 'Virus-mime-version' = 'MIME Header Buffer Overflow '
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing mime-version: .{100,}
16/04/2004 21:01:03:24284: p_s:  '87:.{100,}' = 'Virus-resent-date' = 'MIME Header Buffer Overflow'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing resent-date: .{100,}
16/04/2004 21:01:03:24284: p_s:  '90:ZVDOHYIK@yahoo.com|udtzqccc@yahoo.com|DTCELACB@yahoo.com|I1MCH2TH@yahoo.com|WPADJQ12@yahoo.com|smr@eurosport.com|bgnd2@canada.com|muwripa@fairesuivre.com|eccles@ballsy.net|S_Mentis@mail-x-change.com|YJPFJTGZ@excite.com|JGQZCD@excite.com|XHZJ3@excite.com|OZUNYLRL@excite.com|tsnlqd@excite.com|cxkawog@krovatka.net|ssdn@myrealbox.com' = 'Virus-to' = 'BadTrans Trojan exploit!'
16/04/2004 21:01:03:24284: p_s:  type is a header!
16/04/2004 21:01:03:24284: p_s:  checking for objects containing to: ZVDOHYIK@yahoo.com|udtzqccc@yahoo.com|DTCELACB@yahoo.com|I1MCH2TH@yahoo.com|WPADJQ12@yahoo.com|smr@eurosport.com|bgnd2@canada.com|muwripa@fairesuivre.com|eccles@ballsy.net|S_Mentis@mail-x-change.com|YJPFJTGZ@excite.com|JGQZCD@excite.com|XHZJ3@excite.com|OZUNYLRL@excite.com|tsnlqd@excite.com|cxkawog@krovatka.net|ssdn@myrealbox.com
16/04/2004 21:01:03:24284: p_s:  'eicar.com' = '69' = 'EICAR Test Virus'
16/04/2004 21:01:03:24284: p_s: type is a size!
16/04/2004 21:01:03:24284: p_s:  'happy99.exe' = '10000' = 'Happy99 Trojan'
16/04/2004 21:01:03:24284: p_s: type is a size!
16/04/2004 21:01:03:24284: p_s:  'zipped_files.exe' = '120495' = 'W32/ExploreZip.worm.pak virus'
16/04/2004 21:01:03:24284: p_s: type is a size!
16/04/2004 21:01:03:24284: p_s: skipping auto-generated file 1082142063.24286-0.caronte
16/04/2004 21:01:03:24284: p_s:  finished scan of dir "/var/spool/qmailscan/caronte108214206342624284" in 0.003264 secs
16/04/2004 21:01:03:24284: ini_sc: recursively scan the directory /var/spool/qmailscan/caronte108214206342624284/
16/04/2004 21:01:03:24284: scanloop: starting scan of directory "/var/spool/qmailscan/caronte108214206342624284"...
16/04/2004 21:01:03:24284: clamscan: starting scan of directory "/var/spool/qmailscan/caronte108214206342624284"...
16/04/2004 21:01:03:24284: run /usr/bin/clamscan -r  --tempdir=/var/spool/qmailscan/caronte108214206342624284 --disable-summary --unzip --unrar --unace --unarj --zoo --lha --jar --tar --tgz  /var/spool/qmailscan/caronte108214206342624284 2>&1
16/04/2004 21:01:03:24284: --output of clamscan was:
LibClamAV Error: readdb(): Malformed pattern line 9767 (file /var/spool/qmailscan/caronte108214206342624284/463976e312f94996/viruses.db).
LibClamAV Error: Can't gzdopen() descriptor 5
LibClamAV Error: cli_cvdload(): Can't unpack CVD file.
ERROR: CVD extraction failure.
--
16/04/2004 21:01:03:24284: tempfail: X-Qmail-Scanner-1.16: clam_scanner: corrupt or unknown ClamAV scanner error or memory/resource/perms problem - exit status 50
16/04/2004 21:04:15:24294: +++ starting debugging for process 24294 by uid=201 at 16/04/2004 21:04:15
16/04/2004 21:04:15:24294: setting UID to EUID so subprocesses can access files generated by this script
16/04/2004 21:04:15:24294: program name is qmail-scanner-queue.pl, version 1.16
16/04/2004 21:04:15:24294: incoming SMTP connection from via smtp from 216.127.66.30
16/04/2004 21:04:15:24294: w_c: mkdir /var/spool/qmailscan/caronte108214225542624294
16/04/2004 21:04:15:24294: w_c: start dumping incoming msg into /var/spool/qmailscan/working/tmp/caronte108214225542624294 [1082142255.18835]
16/04/2004 21:04:15:24294: w_c: rename new msg from /var/spool/qmailscan/working/tmp/caronte108214225542624294 to /var/spool/qmailscan/working/new/caronte108214225542624294 [1082142255.48891]
16/04/2004 21:04:15:24294: d_m: starting /usr/bin/reformime  -x/var/spool/qmailscan/caronte108214225542624294/ </var/spool/qmailscan/working/new/caronte108214225542624294 [1082142255.48928]
16/04/2004 21:04:15:24294: d_m: finished /usr/bin/reformime  -x/var/spool/qmailscan/caronte108214225542624294/ [1082142255.49481]
16/04/2004 21:04:15:24294: d_m: Checking all attachments to see if they're MS-TNEF
16/04/2004 21:04:15:24294: d_m: is /var/spool/qmailscan/caronte108214225542624294/1082142255.24297-0.caronte is a TNEF file?: 256 [1082142255.49733]
16/04/2004 21:04:15:24294: d_m: Manually unpack any zip files as some virus scanners don't do zip under Unix!
16/04/2004 21:04:15:24294: d_m: unpacking message took 0.008429 seconds
16/04/2004 21:04:15:24294: unsetting QMAILQUEUE env var
16/04/2004 21:04:15:24294: g_e_h: return-path is "naspe@nblab.net", recips is "naspe@naspenet.org"
16/04/2004 21:04:15:24294: from="Naspe" <naspe@nblab.net>,subj=fgre, x-qmail-scanner-message-id=<13074.213.155.195.224.1082141538.squirrel@www.nblab.net> via smtp from 216.127.66.30
16/04/2004 21:04:15:24294: ini_sc: start scanning
16/04/2004 21:04:15:24294: p_s: starting scan of directory "/var/spool/qmailscan/caronte108214225542624294"...
16/04/2004 21:04:15:24294: p_s:  '81:ILOVEYOU' = 'Virus-subject' = 'Love Letter Virus/Trojan'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing subject: ILOVEYOU
16/04/2004 21:04:15:24294: p_s:  '82:message/partial' = 'Virus-content-type' = 'Message/partial MIME attachments blocked by policy'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing content-type: message/partial
16/04/2004 21:04:15:24294: p_s:  '85:.{100,}' = 'Virus-date' = 'MIME Header Buffer Overflow'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing date: .{100,}
16/04/2004 21:04:15:24294: p_s:  '86:.{100,}' = 'Virus-mime-version' = 'MIME Header Buffer Overflow '
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing mime-version: .{100,}
16/04/2004 21:04:15:24294: p_s:  '87:.{100,}' = 'Virus-resent-date' = 'MIME Header Buffer Overflow'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing resent-date: .{100,}
16/04/2004 21:04:15:24294: p_s:  '90:ZVDOHYIK@yahoo.com|udtzqccc@yahoo.com|DTCELACB@yahoo.com|I1MCH2TH@yahoo.com|WPADJQ12@yahoo.com|smr@eurosport.com|bgnd2@canada.com|muwripa@fairesuivre.com|eccles@ballsy.net|S_Mentis@mail-x-change.com|YJPFJTGZ@excite.com|JGQZCD@excite.com|XHZJ3@excite.com|OZUNYLRL@excite.com|tsnlqd@excite.com|cxkawog@krovatka.net|ssdn@myrealbox.com' = 'Virus-to' = 'BadTrans Trojan exploit!'
16/04/2004 21:04:15:24294: p_s:  type is a header!
16/04/2004 21:04:15:24294: p_s:  checking for objects containing to: ZVDOHYIK@yahoo.com|udtzqccc@yahoo.com|DTCELACB@yahoo.com|I1MCH2TH@yahoo.com|WPADJQ12@yahoo.com|smr@eurosport.com|bgnd2@canada.com|muwripa@fairesuivre.com|eccles@ballsy.net|S_Mentis@mail-x-change.com|YJPFJTGZ@excite.com|JGQZCD@excite.com|XHZJ3@excite.com|OZUNYLRL@excite.com|tsnlqd@excite.com|cxkawog@krovatka.net|ssdn@myrealbox.com
16/04/2004 21:04:15:24294: p_s:  'eicar.com' = '69' = 'EICAR Test Virus'
16/04/2004 21:04:15:24294: p_s: type is a size!
16/04/2004 21:04:15:24294: p_s:  'happy99.exe' = '10000' = 'Happy99 Trojan'
16/04/2004 21:04:15:24294: p_s: type is a size!
16/04/2004 21:04:15:24294: p_s:  'zipped_files.exe' = '120495' = 'W32/ExploreZip.worm.pak virus'
16/04/2004 21:04:15:24294: p_s: type is a size!
16/04/2004 21:04:15:24294: p_s: skipping auto-generated file 1082142255.24297-0.caronte
16/04/2004 21:04:15:24294: p_s:  finished scan of dir "/var/spool/qmailscan/caronte108214225542624294" in 0.003187 secs
16/04/2004 21:04:15:24294: ini_sc: recursively scan the directory /var/spool/qmailscan/caronte108214225542624294/
16/04/2004 21:04:15:24294: scanloop: starting scan of directory "/var/spool/qmailscan/caronte108214225542624294"...
16/04/2004 21:04:15:24294: clamscan: starting scan of directory "/var/spool/qmailscan/caronte108214225542624294"...
16/04/2004 21:04:15:24294: run /usr/bin/clamscan -r  --tempdir=/var/spool/qmailscan/caronte108214225542624294 --disable-summary --unzip --unrar --unace --unarj --zoo --lha --jar --tar --tgz  /var/spool/qmailscan/caronte108214225542624294 2>&1
16/04/2004 21:04:15:24294: --output of clamscan was:
LibClamAV Error: readdb(): Malformed pattern line 9767 (file /var/spool/qmailscan/caronte108214225542624294/72fbb8360e9a86f9/viruses.db).
LibClamAV Error: Can't gzdopen() descriptor 5
LibClamAV Error: cli_cvdload(): Can't unpack CVD file.
ERROR: CVD extraction failure.
--
16/04/2004 21:04:15:24294: tempfail: X-Qmail-Scanner-1.16: clam_scanner: corrupt or unknown ClamAV scanner error or memory/resource/perms problem - exit status 50


What is the problem?


Is clamav working. Are you able to scan any directory. Try scanning your home dir and look if clamav is working. If so, try to rise your "SOFTLIMIT_OPTS" re-emerge clamav, re-emerge qmail-scanner.
If that doesn't help, uncomment clamav in your qmail-scanner file, or unmerge clamav and re-emerge qmail-scanner.
_________________
-->Please add [solved] to the initial post's subject line if you feel your problem is resolved.
-->Help answer the unanswered

http://olausson.de
Back to top
View user's profile Send private message
blubbi
Guru
Guru


Joined: 27 Apr 2003
Posts: 555
Location: Halle (Saale), Germany

PostPosted: Sat Apr 17, 2004 5:53 pm    Post subject: Reply with quote

vcihon wrote:
Everything is working - two more questions:


1. Can someone explain why you would use/want SMTP Auth Post Pop3?
I'm somewhat new to this (we run an Exchange server at work without Pop3 or Imap)


Ähhhmm .... if everyone at work uses M$ Outlook, no problem (except securety problems :-) SMTP AUTH is a protocoll to authenticate SMTP connections. If clients are not able to perform this type of auth, the client can use SMTP after POP. That means, the client has to open a pop3 connection to the server befor he is allowed to relay throug the server he made the connection to.

Quote:


2. This is not directly on topic (qmail setup) but is related:
I have a test domain and a production domain. I set up the test domain with a copy of my website and qmail/vpopmail per this forum. I now want to have email and web traffic redirect from the production domain to the test domain so I don't have to redo everything. Should this be done locally with vpopmail and the use of aliases (and with Apache) or can it/should it be done on the DNS level?

Hints on how to do either scenario would be appreciated. . .


DNS
_________________
-->Please add [solved] to the initial post's subject line if you feel your problem is resolved.
-->Help answer the unanswered

http://olausson.de
Back to top
View user's profile Send private message
dik
n00b
n00b


Joined: 19 Jul 2003
Posts: 69
Location: London

PostPosted: Mon Apr 19, 2004 1:26 pm    Post subject: Reply with quote

Anyone able to help?

I followed the instructions word for word (well at least i think I did..)

When trying to add a new domain, I get the following

Quote:

could not connect to mysql update server Access denied for user: 'vpopmail@localhost' (Using password: YES) with database
could not connect to mysql update server Access denied for user: 'vpopmail@localhost' (Using password: YES)
vmysql: sql error[c]: MySQL server has gone away
vmysql: sql error[b]: MySQL server has gone away
vmysql: sql error[3]: MySQL server has gone away
vmysql: sql error[c]: MySQL server has gone away
vmysql: sql error[c]: MySQL server has gone away
vmysql: sql error[b]: MySQL server has gone away
vmysql: sql error[3]: MySQL server has gone away
vmysql: sql error[2]: MySQL server has gone away
Error: Unable to chdir to vpopmail/users directory


Any ideas ? I think possibly it's trying to connect to the mySQL database, but using the wrong password? I dont -really- know what else to try..

Any help would be appreciated.

Thanks,
Back to top
View user's profile Send private message
vcihon
Tux's lil' helper
Tux's lil' helper


Joined: 19 Aug 2003
Posts: 107

PostPosted: Mon Apr 19, 2004 7:36 pm    Post subject: Reply with quote

Blubbi -

I am having the same issue as Pardok. I rebooted my server and now Pop3 auth is no longer working - says the password is wrong.

I enabled logging as you suggested but do not see any errors. Also, there is Nothing in my /var/mail directory - I'm not sure what should be there. .

Any ideas how to troubleshoot this? I have a feeling if I remove the user and then add him again, it will work however I would rather troubleshoot it first. . .
Back to top
View user's profile Send private message
Pardok
n00b
n00b


Joined: 30 Mar 2004
Posts: 29

PostPosted: Mon Apr 19, 2004 7:54 pm    Post subject: Reply with quote

Vcihon,

I found out that the reboot problem has something to do with relaying.

I installed via Blubbi's How-To without doing the relay-ctrl steps, and my server was running well, even after reboot.

However, I face the problem of not being able to send from outside my own network. That is, I'd sign onto squirrelmail from a machine running Windows XP, try to send an e-mail, only to have it got losts in the ether of my machine.

It was never delivered. I checked the logs and couldn't find any errors. Everything was running and connected.

I don't know where to begin troubleshooting. I'm thinking it has something to do with tcprules.......but I'm not quite sure where to begin.

Blubbi, any advice? The "no-connect" error after reboot has been isoloated to relay-ctrl....perhaps something to do with realy-ctrl isn't starting at boot?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Goto page Previous  1, 2, 3 ... 12, 13, 14, 15, 16, 17  Next
Page 13 of 17

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum