Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Installing Gentoo - The Developers Method - Stage1 and NPTL
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 10, 11, 12 ... 23, 24, 25  Next  
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
krull
n00b
n00b


Joined: 12 Apr 2004
Posts: 8

PostPosted: Fri Nov 19, 2004 12:25 pm    Post subject: Thanks for the HOWTO... Reply with quote

I built my new Gentoo system using the Italian LiveCD(tm) with reiser4 support, nitro-sources and this HOWTO... great stuff!! :D

Code:
krullnet krull # uname -a
Linux krullnet 2.6.9-nitro4 #1 Thu Nov 18 18:21:06 EET 2004 i686 Intel(R) Pentium(R) 4 CPU 2.40GHz GenuineIntel GNU/Linux


Thanks for everything... Keep up the great work... 8)

- KrulL
Back to top
View user's profile Send private message
gza
n00b
n00b


Joined: 19 Nov 2004
Posts: 8

PostPosted: Fri Nov 19, 2004 7:56 pm    Post subject: Just a quick noobie question for clarification Reply with quote

Warning: Extreme Linux Noobie question

I was looking at the instructions and comparing them to the guide in the handbook.

In the guide, after the kernel is created and compiled it is copied over into /boot. The same for the System.map and optionally, the .config.

This step is ommited in this ntpl guide. Is that done on purpose?

Another area where there is a difference:
(nptl) make && make modules modules_install install
(handbook) make && make modules modules_install

do I need that last install?

Also: for pentium4 users, the make.conf provided has a typo.

CFLAGS="=march=pentium4 -03 -pipe"
should be
CFLAGS="-march=pentium4 -03 -pipe"


Last edited by gza on Fri Nov 19, 2004 9:25 pm; edited 1 time in total
Back to top
View user's profile Send private message
Bob P
Advocate
Advocate


Joined: 20 Oct 2004
Posts: 3355
Location: Jackass! Development Labs

PostPosted: Fri Nov 19, 2004 8:23 pm    Post subject: Reply with quote

gza wrote:
In the guide, after the kernel is created and compiled it is copied over into /boot. The same for the System.map and optionally, the .config.

This step is ommited [sic] in the guide. Is that done on purpose?

i'm a little confused by your question -- i guess that your first sentence you use the term "guide" to refer to the Gentoo Installation Handbook, and in your last sentence you use the same term, "guide," to refer to the Stage 1/NPTL HOW-TO, right? :roll: this makes it hard for anyone to follow which "guide" you're referring to.

in the GIH, you are instructed to manually copy the files individually. in this HOW-TO, the installation steps are consolidated as part of the recommended command line parameters. you should NOT change them from what ali3nx has recommended. if you follow his instructions to the letter you'll get the desired results. i have to admit, the syntax of the concactenated command line string in this HOW_TO is not as inherently clear to the new user as the multiple steps in the GIH; but it is tremendously more efficient. following this HOW_TO throws you onto a steeper portion of the learning curve. welcome aboard. :wink:

btw, the pentium 4 sytax error has already been documented in this thread. hopefully the fix will make its way into ali3nx's sample make.conf. if this typo applies to your situation, you should fix it.

best of luck!
_________________
.
Stage 1/3 | Jackass! | Rockhopper! | Thanks | Google Sucks
Back to top
View user's profile Send private message
nick_ellsworth
n00b
n00b


Joined: 05 Nov 2004
Posts: 16
Location: Victorville, CA

PostPosted: Sat Nov 20, 2004 1:56 am    Post subject: Reply with quote

linux_on_the_brain wrote:
nick_ellsworth, I posted a little something about your situation on your other thread.


Thanks.
_________________
Registered Linux User #333985
"You don't give blood then take it back again." - Pearl Jam
Back to top
View user's profile Send private message
hielvc
Advocate
Advocate


Joined: 19 Apr 2002
Posts: 2805
Location: Oceanside, Ca

PostPosted: Sat Nov 20, 2004 2:43 am    Post subject: Reply with quote

When you
Code:
make && make modules modules_install install
that last install is command that automatically copies bzIamge to /boot/vmlinuz and the System.map and .config to Config. Heres mine
Quote:
ll /boot
total 11M
lrwxr-xr-x 1 root root 27 Nov 12 18:28 System.map -> System.map-2.6.9-gentoo-r3n
-rw-r--r-- 1 root root 931K Oct 19 09:10 System.map-2.6.8-gentoo-r10
-rw-r--r-- 1 root root 892K Nov 5 15:02 System.map-2.6.9-gentoo-r1n
-rw-r--r-- 1 root root 892K Nov 5 13:44 System.map-2.6.9-gentoo-r1n.old
-rw-r--r-- 1 root root 892K Nov 12 18:28 System.map-2.6.9-gentoo-r3n
lrwxr-xr-x 1 root root 27 Nov 5 15:02 System.map.old -> System.map-2.6.9-gentoo-r1n
lrwxrwxrwx 1 root root 1 Jun 22 2003 boot -> ./
lrwxr-xr-x 1 root root 23 Nov 12 18:28 config -> config-2.6.9-gentoo-r3n
-rw-r--r-- 1 root root 27K Oct 19 09:10 config-2.6.8-gentoo-r10
-rw-r--r-- 1 root root 26K Nov 5 15:02 config-2.6.9-gentoo-r1n
-rw-r--r-- 1 root root 26K Nov 5 13:44 config-2.6.9-gentoo-r1n.old
-rw-r--r-- 1 root root 26K Nov 12 18:28 config-2.6.9-gentoo-r3n
lrwxr-xr-x 1 root root 23 Nov 5 15:02 config.old -> config-2.6.9-gentoo-r1n
drwxr-xr-x 2 root root 1.0K Sep 20 13:24 grub/
drwx------ 2 root root 12K Mar 28 2003 lost+found/
lrwxr-xr-x 1 root root 24 Nov 12 18:28 vmlinuz -> vmlinuz-2.6.9-gentoo-r3n
-rw-r--r-- 1 root root 1.7M Oct 19 09:10 vmlinuz-2.6.8-gentoo-r10
-rw-r--r-- 1 root root 1.6M Nov 5 15:02 vmlinuz-2.6.9-gentoo-r1n
-rw-r--r-- 1 root root 1.6M Nov 5 13:44 vmlinuz-2.6.9-gentoo-r1n.old
-rw-r--r-- 1 root root 1.6M Nov 12 18:28 vmlinuz-2.6.9-gentoo-r3n
lrwxr-xr-x 1 root root 24 Nov 5 15:02 vmlinuz.old -> vmlinuz-2.6.9-gentoo-r1n


It beats the ell outa doing it by hand. But you say vmlinuz!!!! Well your grub conf
Code:
cat /boot/grub/grub.conf
default 0
timeout 15
splashimage=(hd0,0)/boot/grub/splash.xpm.gz

title=Gentoo 2.6.9-gentoo-r1n
root (hd0,0)
#kernel (hd0,0)/boot/vmlinuz root=0303 vga=791 hdc=ide-cd
kernel (hd0,0)/vmlinuz root=/dev/hda3 vga=ask hdv=ide-cd

title=gentoo  2.6.9-gentoo-r1n
root (hd0,0)
kernel (hd0,0)/vmlinuz.old root=0303 vga=ask hdc=ide-cd

title=gentoo 2.6.8-r10
root (hd0,0)
kernel (hd9,0)/vmlinuz-2.6.8-r10-gentoo root=0303 vga=791 hdc=ide-cd

If you want you can "mv kernel_img windows" and guess what your grub kernel line would be

kernel (hd0,0)/windows root=......." . Hope thats helps.
_________________
An A-Z Index of the Linux BASH command line
Back to top
View user's profile Send private message
thecrazyperson_ws
Tux's lil' helper
Tux's lil' helper


Joined: 06 Apr 2004
Posts: 89

PostPosted: Sat Nov 20, 2004 1:13 pm    Post subject: Reply with quote

I noticed one flaw in the tutorial way up in the booting from livecd portion. The 2004.3 livecd no longer has separate "gentoo" and "smp" kernels. The "gentoo" kernel (the only one btw) is 2.6.9-gentoo-r1 smp.

Code:
livecd root # uname -rv
2.6.9-gentoo-r1 #1 SMP Tue Nov 2 23:12:07 UTC 2004


Ali3n, if you could change that portion to avoid confusion, it would be appreciated.
_________________
Bevelle: Dual Athlon MP 2000+, 1.25G ram, 120G HD, Gentoo 2005.1-r1, Kernel 2.6.15-gentoo-r5

Gagazet: Pentium 2-266, 288M ram, 240G HD, currently installing gentoo

Besaid: p-150, 80M ram, win2k pro
Back to top
View user's profile Send private message
gza
n00b
n00b


Joined: 19 Nov 2004
Posts: 8

PostPosted: Sun Nov 21, 2004 2:40 am    Post subject: Setting userlocales Reply with quote

"Activate the userlocales USE flag especially for glibc" and subsequently modify the locales.

This is in the gentoo installation handbook; should this be added to this dev-ntpl guide?

I noticed that a healthy portion of time was spent addressing ALL the locales while my super-duper-one-liner was running. Maybe setting the locales could shave some time compiling.
Back to top
View user's profile Send private message
Soul_rebel
Tux's lil' helper
Tux's lil' helper


Joined: 12 Nov 2004
Posts: 88

PostPosted: Sun Nov 21, 2004 6:01 pm    Post subject: Reply with quote

I am having tremendous problems installing gentoo in this way, perhaps i am doing something wrong but every time i end up with a inconsistent system... Please tell me what i am doing wrong:
this is the make.conf:
Code:
CHOST="i686-pc-linux-gnu"
CFLAGS="-O3 -march=athlon-xp -msse -mmmx -m3dnow -momit-leaf-frame-pointer -fomit-frame-pointer -funroll-loops -ftracer -ffast-math -fprefetch-loop-arrays -freduce-all-givs -finline-limit=600 -mfpmath=387 -pipe"
CXXFLAGS="${CFLAGS}"
#LDFLAGS="-Wl,-z,combreloc -Wl,-O,2 -Wl, -Wl,--enable-new-dtags -Wl,--sort-common -s"
ACCEPT_KEYWORDS="~x86"
USE="nptl gnome gtk -qt -kde alsa"
MAKEOPTS="-j2"
GENTOO_MIRRORS="ftp://ftp.snt.utwente.nl/pub/os/linux/gentoo ftp://mirror.nutsmaas.nl/gentoo/ ftp://ftp.du.se/pub/os/gentoo http://gd.tuwien.ac.at/opsys/linux/gentoo/"

If i bootstrap normally the script installs both the 2.6 and the 2.4 headers! then when it comes to glibc it says i have no 2.6 headers and stops.
so i unmerged the 2.4 and merged again 2.6 glibc started compiling but returned an error.
So here what i am doing:
Code:

cd /usr/portage
emerge sync
USE="-* build bootstrap" emerge linux26-headers
scripts/bootstrap.sh
#emerge system

Bootstrap is succesful but emerge system stops after installing bash and leaves me with a non working portage: strange errors:
/usr/lib/portage/bin/ebuild.sh
line 1319: no file or directory
It cant merge or unmerge anything at this point
I have heard about a perl problem so i tryed emerge libperl and emerge perl after boostrap but before emerge system= same result!
NOTE everything has been tryed at least twice!
What's the problem?
please help! bye
_________________
LinuX @ the Speed of Thought
Back to top
View user's profile Send private message
thecrazyperson_ws
Tux's lil' helper
Tux's lil' helper


Joined: 06 Apr 2004
Posts: 89

PostPosted: Sun Nov 21, 2004 9:45 pm    Post subject: Reply with quote

Soul: Try backing down your CFLAGS a bit. This may sound a little strange to do, but you'd be surprised how many errors are fixed by this. Here's mine (followed this dev-nptl guide to the letter (didn't even change the make.conf except for CHOST and CFLAGS)) and it got through glibc just fine.

Code:
CFLAGS="-march=pentium3 -O5 -pipe -fomit-frame-pointer -mmmx -msse -mfpmath=sse"


Try this (except change "-march=pentium3" to "-march=athlon-xp") and see if it helps.
_________________
Bevelle: Dual Athlon MP 2000+, 1.25G ram, 120G HD, Gentoo 2005.1-r1, Kernel 2.6.15-gentoo-r5

Gagazet: Pentium 2-266, 288M ram, 240G HD, currently installing gentoo

Besaid: p-150, 80M ram, win2k pro
Back to top
View user's profile Send private message
Bob P
Advocate
Advocate


Joined: 20 Oct 2004
Posts: 3355
Location: Jackass! Development Labs

PostPosted: Sun Nov 21, 2004 10:07 pm    Post subject: Reply with quote

are you installing from 2004.2 or 2004.3 media and tarballs?
_________________
.
Stage 1/3 | Jackass! | Rockhopper! | Thanks | Google Sucks
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 612
Location: Winnipeg, Canada

PostPosted: Sun Nov 21, 2004 10:26 pm    Post subject: Reply with quote

Sorry i've been really busy lately with donor installs and the winter season bagged me with a cold last week. I'll be available more this week to answer questions and i'll update the tut with the new networking section for baselayout. I havent stopped kicking yet so expect more compiling in the very near future.
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
Soul_rebel
Tux's lil' helper
Tux's lil' helper


Joined: 12 Nov 2004
Posts: 88

PostPosted: Mon Nov 22, 2004 7:40 am    Post subject: Reply with quote

it was beacause of cflags!
i received a bad advise about those.... now i have set it to something more normal and it is ok
_________________
LinuX @ the Speed of Thought
Back to top
View user's profile Send private message
hirnstrudel.de
n00b
n00b


Joined: 17 Nov 2004
Posts: 40

PostPosted: Mon Nov 22, 2004 1:05 pm    Post subject: Reply with quote

After succesfully testing NPTL on my local server with 2004.3 LiveCD, i want to use it on a remote machine.
But I can't boot from a Gentoo LiveCD, but only from a Debian based rescue system with kernel 2.4.27
Of cource i get the following error
* You need a kernel of at least version 2.6.5
* for NPTL support!
So is there any way to use NPTL on my remote machine? :(

edit:
- can i build a binary package of glibc on my local machine and tranfser it to my remote server?
- can i do a install with linuxthreads, and replace glibc afterwards?
Back to top
View user's profile Send private message
Deranger
Veteran
Veteran


Joined: 26 Aug 2004
Posts: 1215

PostPosted: Mon Nov 22, 2004 4:23 pm    Post subject: Re: Setting userlocales Reply with quote

gza wrote:
"Activate the userlocales USE flag especially for glibc" and subsequently modify the locales.

This is in the gentoo installation handbook; should this be added to this dev-ntpl guide?

I noticed that a healthy portion of time was spent addressing ALL the locales while my super-duper-one-liner was running. Maybe setting the locales could shave some time compiling.

I agree, userlocales should be added. There's no point to compile all locales, only needed ones. Cutting down useless locales speeds up glibc compilation dramatically.
Back to top
View user's profile Send private message
Deranger
Veteran
Veteran


Joined: 26 Aug 2004
Posts: 1215

PostPosted: Mon Nov 22, 2004 4:28 pm    Post subject: Reply with quote

hirnstrudel.de wrote:
After succesfully testing NPTL on my local server with 2004.3 LiveCD, i want to use it on a remote machine.
But I can't boot from a Gentoo LiveCD, but only from a Debian based rescue system with kernel 2.4.27
Of cource i get the following error
* You need a kernel of at least version 2.6.5
* for NPTL support!
So is there any way to use NPTL on my remote machine? :(

edit:
- can i build a binary package of glibc on my local machine and tranfser it to my remote server?
- can i do a install with linuxthreads, and replace glibc afterwards?

No, there isn't any ways. NPTL needs 2.6 headers and kernel. If you build packages on your own box, and transfer them to a remote machine, you still don't have 2.6 kernel or 2.6 headers. Result: b0rked toolchain.
Back to top
View user's profile Send private message
hirnstrudel.de
n00b
n00b


Joined: 17 Nov 2004
Posts: 40

PostPosted: Mon Nov 22, 2004 4:48 pm    Post subject: Reply with quote

Oktane wrote:
No, there isn't any ways. NPTL needs 2.6 headers and kernel. If you build packages on your own box, and transfer them to a remote machine, you still don't have 2.6 kernel or 2.6 headers. Result: b0rked toolchain.

and what about building a working 2.6 system based on linuxthreads, and then switch to nptl?
e.g. installing stage3 tarball and then recompile everything.
Back to top
View user's profile Send private message
hielvc
Advocate
Advocate


Joined: 19 Apr 2002
Posts: 2805
Location: Oceanside, Ca

PostPosted: Mon Nov 22, 2004 5:19 pm    Post subject: Reply with quote

Use a stage2, umerge linux-headers "emerge --oneshot linux26-headers" then emerge a kernel-2.6 set it up and boot from it. Now you can emerge glibc +nptl gcc and the rest of your system.
_________________
An A-Z Index of the Linux BASH command line
Back to top
View user's profile Send private message
hirnstrudel.de
n00b
n00b


Joined: 17 Nov 2004
Posts: 40

PostPosted: Mon Nov 22, 2004 5:31 pm    Post subject: Reply with quote

hielvc wrote:
Use a stage2, umerge linux-headers "emerge --oneshot linux26-headers" then emerge a kernel-2.6 set it up and boot from it. Now you can emerge glibc +nptl gcc and the rest of your system.

what about "emerge --system" ?
i need also sshd, because i have no other access to the server.
Back to top
View user's profile Send private message
hielvc
Advocate
Advocate


Joined: 19 Apr 2002
Posts: 2805
Location: Oceanside, Ca

PostPosted: Mon Nov 22, 2004 5:44 pm    Post subject: Reply with quote

Use a stage2 or 3 get he linux26-headers then get your 2.6 kernel going. Once you got this you can bootstrap or emerge -e world or emerge --newuse world.
_________________
An A-Z Index of the Linux BASH command line
Back to top
View user's profile Send private message
Meaulnes
n00b
n00b


Joined: 15 Mar 2004
Posts: 49

PostPosted: Mon Nov 22, 2004 10:10 pm    Post subject: NPTL Reply with quote

Hello all,
I just rebuilt my system this weekend using this guide. Everythji8ng seemed to go great, but when I rebooted and started looking at some stuff, I saw this:

Code:
 ~ $ /lib/libc.so.6
GNU C Library 20041102 release version 2.3.4, by Roland McGrath et al.
Copyright (C) 2004 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.4.3  (Gentoo Linux 3.4.3, ssp-3.4.3-0, pie-8.7.6.6).
Compiled on a Linux 2.6.8 system on 2004-11-20.
Available extensions:
        GNU libio by Per Bothner
        crypt add-on version 2.1 by Michael Glad and others
        linuxthreads-0.10 by Xavier Leroy
        The C stubs add-on version 2.1.2.
        GNU Libidn by Simon Josefsson
        BIND-8.2.3-T5B
        libthread_db work sponsored by Alpha Processor Inc
        NIS(YP)/NIS+ NSS modules 0.19 by Thorsten Kukuk
Thread-local storage support included.
For bug reporting instructions, please see:
<http://www.gnu.org/software/libc/bugs.html>.


In the past, the linuxthreads line was never there and there was always something to the effect of NPTL by Ulrich somebody (sorry it has been a while since I looked at it).

During the build, the only USE flag I had set was USE="nptl" in make.conf and it is still there:

Code:
 ~ $ cat /etc/make.conf | grep nptl
USE="aim alsa avi bitmap-fonts cdr crypt cups dga directfb divx4linux dvd dvdr fbcon gpm gtk gtk2 icq jabber java mozilla msn nptl oggvorbis opengl samba sdl spell sox svga usb wxwindows xmms xv xvid X yahoo "


Any thoughts on what may have happened? and how might I go about fixing this? I am going to try rebuilding glibc and then maybe an emerge world after that.
Back to top
View user's profile Send private message
MoonWalker
Guru
Guru


Joined: 04 Jul 2002
Posts: 449

PostPosted: Mon Nov 22, 2004 11:52 pm    Post subject: Reply with quote

No luck :cry: Using 2004.3 minimal and a stage1 I follow the guide and everything goes fine until it's time for bootstrap.sh and first emerge of portage-2.0.51-r3 borks with a gcc error I can't figure out, have tried it from scratch now 3 times.
Code:
gcc: Installation problem, can not exec 'as' : no such file or directory


also when I do #emerge info, I see

Code:
COMPILER=""


which must be wrong.

it's a P4 1.8 and CFLAGS="-march pentium4 -O2 -pipe"

somewhat gcc seam to "get lost" somewere. I did a "normal" bootstrap ones but but as it seamed it liked to prepare for a 2.4 system (but it maybe was just the headers) I then found this threed and started all over. But that was 36h ago and still no go :-)

anyone have an idea?

EDIT:
Well after cleaning out everything and starting over from scratch, this time excluding the "&& emerge -C linux-headers" of the magic oneliner, it now at least seam to get passed the previous error. So it's now bootstraping, puh... lets see how far it goes.
_________________
/Joakim

Living on earth is expensive, but it includes a free trip around the sun
every year.
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 612
Location: Winnipeg, Canada

PostPosted: Tue Nov 23, 2004 3:48 am    Post subject: Reply with quote

Oktane wrote:
hirnstrudel.de wrote:
After succesfully testing NPTL on my local server with 2004.3 LiveCD, i want to use it on a remote machine.
But I can't boot from a Gentoo LiveCD, but only from a Debian based rescue system with kernel 2.4.27
Of cource i get the following error
* You need a kernel of at least version 2.6.5
* for NPTL support!
So is there any way to use NPTL on my remote machine? :(

edit:
- can i build a binary package of glibc on my local machine and tranfser it to my remote server?
- can i do a install with linuxthreads, and replace glibc afterwards?

No, there isn't any ways. NPTL needs 2.6 headers and kernel. If you build packages on your own box, and transfer them to a remote machine, you still don't have 2.6 kernel or 2.6 headers. Result: b0rked toolchain.


I think i found the source of the error... gcc-config isn't setting the default profile back to the new gcc during bootstrap... I just did an install last night and had the same error twice during both bootstraps on the same box. after using gcc-config to set a profile everything worked hunkey dorey. vapier we need you again :wink:
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
Deranger
Veteran
Veteran


Joined: 26 Aug 2004
Posts: 1215

PostPosted: Tue Nov 23, 2004 8:06 am    Post subject: Reply with quote

ali3nx, I know :| I have been trying to do some experiementing with C(XX)FLAGS, and noticed that it doesn't set new GCC profile.

Fails on bootstrap... :(

Damn, sometimes it's hard to live on the edge ;)


Last edited by Deranger on Tue Nov 23, 2004 10:57 am; edited 2 times in total
Back to top
View user's profile Send private message
R!tman
Veteran
Veteran


Joined: 18 Dec 2003
Posts: 1303
Location: Zurich, Switzerland

PostPosted: Tue Nov 23, 2004 9:05 am    Post subject: Reply with quote

Oktane wrote:
Damn, sometimes it's hard to live on the edge ;)


:D

I can hardly wait for testing this "living on the egde" with new hardware. I think of getting one of the new nforce4 boards.
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 612
Location: Winnipeg, Canada

PostPosted: Tue Nov 23, 2004 9:21 am    Post subject: Reply with quote

R!tman wrote:
Oktane wrote:
Damn, sometimes it's hard to live on the edge ;)


:D

I can hardly wait for testing this "living on the egde" with new hardware. I think of getting one of the new nforce4 boards.


hehe... i'm havin some fun myself with a little hardware

Code:
backup1 root # uname -a
Linux backup1 2.6.9-gentoo-r4 #2 SMP Tue Nov 23 02:21:25 EST 2004 i686 Intel(R) Xeon(TM) CPU 2.66GHz GenuineIntel GNU/Linux
backup1 root # top

top - 04:22:33 up  1:57,  4 users,  load average: 1.12, 1.33, 1.13
Tasks:  66 total,   2 running,  64 sleeping,   0 stopped,   0 zombie
Cpu0  :  1.3% us,  0.3% sy,  0.0% ni, 98.3% id,  0.0% wa,  0.0% hi,  0.0% si
Cpu1  :  8.3% us,  2.0% sy,  0.0% ni, 89.7% id,  0.0% wa,  0.0% hi,  0.0% si
Cpu2  : 31.6% us,  8.6% sy,  0.0% ni, 59.8% id,  0.0% wa,  0.0% hi,  0.0% si
Cpu3  : 48.5% us,  1.3% sy,  0.0% ni, 50.2% id,  0.0% wa,  0.0% hi,  0.0% si
Mem:   6235588k total,  4107324k used,  2128264k free,   158640k buffers
Swap:  2008116k total,        0k used,  2008116k free,  3744832k cached


Code:
backup1 root # lspci
0000:00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
0000:00:00.1 Class ff00: Intel Corp. E7500/E7501 Host RASUM Controller (rev 01)
0000:00:02.0 PCI bridge: Intel Corp. E7500/E7501 Hub Interface B PCI-to-PCI Bridge (rev 01)
0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42)
0000:00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
0000:00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
0000:01:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 03)
0000:01:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 03)
0000:01:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 03)
0000:01:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 03)
0000:02:01.0 RAID bus controller: 3ware Inc 3ware Inc 3ware 9xxx-series SATA-RAID
0000:03:02.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
0000:03:02.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
0000:04:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)

specs are - 3ware 9500 series raid5 sata
6gb ram
1TB of sata disk
10MBit Fiber Internap
one happy ali3n :lol:
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Goto page Previous  1, 2, 3 ... 10, 11, 12 ... 23, 24, 25  Next
Page 11 of 25

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum