Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Installing Gentoo - The Developers Method - Stage1 and NPTL
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 17, 18, 19 ... 23, 24, 25  Next  
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
nelix
n00b
n00b


Joined: 22 Dec 2003
Posts: 30
Location: Melbourne Australia

PostPosted: Tue Dec 14, 2004 11:12 am    Post subject: :( Reply with quote

I had issues with groff... so i emerged an older version then resumed merging system... so far so good.

Anyone else have any issues with groff?

[/code]
_________________
eof
Back to top
View user's profile Send private message
Saillord
n00b
n00b


Joined: 09 Mar 2004
Posts: 35
Location: Bremen/Germany

PostPosted: Tue Dec 14, 2004 11:25 am    Post subject: another compile error / version missmatch libtool&ltmain Reply with quote

Heyho,

with the hope that anybody can help me over this :idea:

I am intalling via the stage3-solution (e.g. by kimchi_sg on the top of this page) having reduced the system-relevant use-flags to the ones mentionned by Oktane (~x86 and pentium-m) - no problems to the point of emerge -e system - but when trying to merge sysfsutils, I get following error:

Gentoo sanity check failed
libtool.m4 and ltmail.sh have a version mismatch
(libtool.m4 = 1.5.10, ltmain.sh = 1.4.2)
please run: libtoolize --copy --force
ERROR: sys-fs/fsutils-1.2.0 failed


Does anybody now how to correct this missmatch - the libtool seems to be right-numbered, but what package the ltmain stands for? I reemerged libtool, glib, automake, autoconf - without succes - and the libtoolize --copy --force in the /usr/portage/sysfsutils-directory just says: configure.ac does not exist.

I know this is probably a general problem, but I am also guessing (and hoping after lots of days trying to finish installation now) this forum would be able to give me some hints :?:

Cheers - saillord
_________________
il n'y a pas de vent favorable pour celui qui ne sait pas où il va
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 620
Location: Winnipeg, Canada

PostPosted: Tue Dec 14, 2004 4:26 pm    Post subject: Re: another compile error / version missmatch libtool&lt Reply with quote

Saillord wrote:
Heyho,

with the hope that anybody can help me over this :idea:

I am intalling via the stage3-solution (e.g. by kimchi_sg on the top of this page) having reduced the system-relevant use-flags to the ones mentionned by Oktane (~x86 and pentium-m) - no problems to the point of emerge -e system - but when trying to merge sysfsutils, I get following error:

Gentoo sanity check failed
libtool.m4 and ltmail.sh have a version mismatch
(libtool.m4 = 1.5.10, ltmain.sh = 1.4.2)
please run: libtoolize --copy --force
ERROR: sys-fs/fsutils-1.2.0 failed


Does anybody now how to correct this missmatch - the libtool seems to be right-numbered, but what package the ltmain stands for? I reemerged libtool, glib, automake, autoconf - without succes - and the libtoolize --copy --force in the /usr/portage/sysfsutils-directory just says: configure.ac does not exist.

I know this is probably a general problem, but I am also guessing (and hoping after lots of days trying to finish installation now) this forum would be able to give me some hints :?:



Cheers - saillord

I'm experiencing the same problem aswell... looks like the offending package is gettext or libtool. I'm trying to fix it myself but it looks to me that a dev will need to look into it. I'll message one of the core system devs and see about having it fixed. In the meantime just skip that package.. Your system will boot without it.
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
Saillord
n00b
n00b


Joined: 09 Mar 2004
Posts: 35
Location: Bremen/Germany

PostPosted: Tue Dec 14, 2004 5:42 pm    Post subject: Reply with quote

Quote:
looks like the offending package is gettext or libtool


... is it then worth trying the procedure proposed by the emerge-gettext-message ?

"emerge gentoolkit" and do: "revdep -rebuild --soname libintl.so.2"

(I don't want to try anything I where I do not understand what that does cause)

(btw: when emerging gettext we are informed that the relink-patch is not applied - possible error-reason ?)

Regards - Saillord
_________________
il n'y a pas de vent favorable pour celui qui ne sait pas où il va
Back to top
View user's profile Send private message
nelix
n00b
n00b


Joined: 22 Dec 2003
Posts: 30
Location: Melbourne Australia

PostPosted: Wed Dec 15, 2004 2:27 am    Post subject: fixed Reply with quote

i seemed to have fixed mine?
I went to the work dir and did:
libtoolize --copy --force

then ebuild compile install qmerge

and it seems to be installed fine..
_________________
eof
Back to top
View user's profile Send private message
tcostigl
Tux's lil' helper
Tux's lil' helper


Joined: 28 Jul 2004
Posts: 97

PostPosted: Wed Dec 15, 2004 4:40 am    Post subject: Reply with quote

If you are doing "~arch" with linux26-headers and nptl don't you have to do gcc-config [some number] to switch to the latest gcc?

To be more descriptive, after:
emergre --oneshot linux36-headers && emerge --oneshot glibc binutils gcc ^^^shouldn't we now switch to the newest gcc before: emerge -e system ?
Back to top
View user's profile Send private message
linux_on_the_brain
Tux's lil' helper
Tux's lil' helper


Joined: 24 Feb 2004
Posts: 136

PostPosted: Wed Dec 15, 2004 5:15 am    Post subject: Reply with quote

I decided to upgrade the laptop with 2 7200rpm 60gb drives, and proceded to follow these instructions again. I however used reiser4 this around after reading all the raves about how great and fast it is. Well after I bootstrapped and emerged system and all the rest I rebooted, and rebooted and rebooted. Finally got the system up, then I started to experience random lockups. Well I just had a lock up about an hour ago. Powered off and back on, guess what total filesystem corruption. Are there any special kernel options that need to be set for reiser4, is there anything not supported besides amd64, such as smp or hyperthreaded machines. Any help would be appreciated before I reinstall. I've searched around but didnt come up with any clear answers.
Back to top
View user's profile Send private message
landon
Apprentice
Apprentice


Joined: 09 Mar 2004
Posts: 159

PostPosted: Wed Dec 15, 2004 5:22 am    Post subject: What differs from the guide in page 1? Reply with quote

I haven't had the time to read through all of the comments, so if anyone can summarize the differences between the last edit that the author made more than a week ago and now, that would be great.
Back to top
View user's profile Send private message
tcostigl
Tux's lil' helper
Tux's lil' helper


Joined: 28 Jul 2004
Posts: 97

PostPosted: Wed Dec 15, 2004 5:34 am    Post subject: Reply with quote

HyperThreading is not supported in Reiser4. I think SMP in general is the problem though. Search the forums for answers.
Back to top
View user's profile Send private message
Hobbit_HK
n00b
n00b


Joined: 11 Nov 2004
Posts: 54
Location: Israel

PostPosted: Wed Dec 15, 2004 11:48 am    Post subject: Reply with quote

hielvc wrote:
So the new super duper one liner would look like this.
Code:

 env-update && source /etc/profile && emerge --oneshot --nodeps gcc-config && emerge linux26-headers &&  emerge --oneshot glibc binutils gcc && emerge -e system && emerge syslog-ng xinetd grub hotplug coldplug vixie-cron reiserfsprogs reiser4progs  sysfsutils udev dhcpcd && emerge --nodeps acpid ntp && rc-update add syslog-ng default && rc-update add net.eth0 default && rc-update add vixie-cron default && rc-update add xinetd default && rc-update add sshd default && rc-update add hotplug default && rc-update add coldplug default && rc-update add acpid default



I think you can improve that.. First, having a oneliner makes it impossible to change CFLAGS to take advantage of new GCC features, etc.
I edited your onliner and made it a three-liner:
Code:

env-update && source /etc/profile && USE='nptl nptlonly' emerge --oneshot --nodeps gcc-config && emerge -C linux-headers && emerge linux26-headers &&  emerge glibc portage binutils gcc

I did the bootstrap thing twice to lock-down the toolchain, you can skip the second time if you want.
After that you edit /etc/make.conf to change CFLAGS and such, then you do:

Code:

emerge glibc binutils gcc && emerge -e system && emerge -e system && emerge syslog-ng xinetd grub vixie-cron reiserfsprogs reiser4progs  sysfsutils udev dhcpcd hotplug coldplug && emerge --nodeps acpid ntp

Again, emerge -e system twice for a lock-down (I think the second time is redundant though, because you already have an optimised toolchain... This time looks like a "build system with a system built with an optimised toolchain" time).
Now you edit some config files (most importantly /etc/conf.d/net.eth0) and then:

Code:

rc-update add syslog-ng default && rc-update add net.eth0 default && rc-update add vixie-cron default && rc-update add xinetd default && rc-update add sshd default && rc-update add hotplug default && rc-update add coldplug default && rc-update add acpid default


What do you think?

EDIT: And I think we should enter the userlocales USE flag to this manual... It saves a lot of time:
Code:

echo sys-libs/glibc userlocales >> /etc/portage/package.use
nano /etc/locales.build

_________________
- Hobbit HK :)

Don't use stage1\2 tarballs
Do a stage1 install from a stage3 tarball
Back to top
View user's profile Send private message
landon
Apprentice
Apprentice


Joined: 09 Mar 2004
Posts: 159

PostPosted: Wed Dec 15, 2004 1:19 pm    Post subject: Reply with quote

Does anybody elses ncurses build fail while doing emerge --oneshot glibc binutils gcc?
Back to top
View user's profile Send private message
linux_on_the_brain
Tux's lil' helper
Tux's lil' helper


Joined: 24 Feb 2004
Posts: 136

PostPosted: Wed Dec 15, 2004 5:03 pm    Post subject: Reply with quote

I found the following to work when getting errors about libtool.
After digging through bugzilla this is what I found


When getting the following

Gentoo sanity check failed
libtool.m4 and ltmail.sh have a version mismatch
(libtool.m4 = 1.5.10, ltmain.sh = 1.4.2)
please run: libtoolize --copy --force
ERROR: sys-fs/fsutils-1.2.0 failed

Do this
- edit the failing ebuild
- change elibtoolize to libtoolize --copy --force
Back to top
View user's profile Send private message
jj2f1
n00b
n00b


Joined: 25 Jun 2004
Posts: 12

PostPosted: Wed Dec 15, 2004 5:11 pm    Post subject: Reply with quote

Can someone take a look at this and give me a guess as to what I am doing wrong. I got bootstrap, and emerge system to work but when I went to emerge the splash utils, as noted in previos post, I got a similar looking error. I skipped the splash screen and started to emerge xorg. A couple packages installed, but I got an error on ttmkfdir.

Code:
root@slide ~ # emerge --pretend xorg-x11

These are the packages that I would merge, in order:

Calculating dependencies ...done!
[ebuild  N    ] x11-misc/ttmkfdir-3.0.9-r2
[ebuild  N    ] x11-base/xorg-x11-6.8.0-r3
[ebuild  N    ] x11-terms/xterm-196-r1

root@slide ~ # emerge xorg-x11
Calculating dependencies ...done!
>>> emerge (1 of 3) x11-misc/ttmkfdir-3.0.9-r2 to /
>>> md5 src_uri ;-) ttmkfdir-3.0.9.tar.bz2
>>> Unpacking source...
>>> Unpacking ttmkfdir-3.0.9.tar.bz2 to /var/tmp/portage/ttmkfdir-3.0.9-r2/work
 * Applying ttmkfdir-3.0.9-cpp.patch ...                                                 [ ok ]

 * Applying ttmkfdir-3.0.9-zlib.patch ...                                                [ ok ]

 * Applying ttmkfdir-3.0.9-gcc34.patch ...                                               [ ok ]

 * Applying ttmkfdir-3.0.9-encoding.patch ...                                            [ ok ]

>>> Source unpacked.
libtool --mode=compile x86_64-pc-linux-gnu-g++ -Wall -pedantic -I/usr/include/freetype2  -march
=athlon64 -pipe -o ttmkfdir.o -c ttmkfdir.cpp
libtool --mode=compile x86_64-pc-linux-gnu-g++ -Wall -pedantic -I/usr/include/freetype2  -march
=athlon64 -pipe -o directory.o -c directory.cpp
libtool: compile: unable to infer tagged configuration
libtool: compile: specify a tag with `--tag'
make: *** [ttmkfdir.o] Error 1
make: *** Waiting for unfinished jobs....
libtool: compile: unable to infer tagged configuration
libtool: compile: specify a tag with `--tag'
make: *** [directory.o] Error 1

!!! ERROR: x11-misc/ttmkfdir-3.0.9-r2 failed.
!!! Function src_compile, Line 39, Exitcode 2
!!! emake failed
!!! If you need support, post the topmost build error, NOT this status message.


This is my /etc/make.conf in case there is a problem with that.

Code:
# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-march=athlon64 -pipe -O2"
CHOST="x86_64-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"
MAKEOPTS="-j2"
USE="gtk gtk2 qt kde -gnome dvd alsa cdr nptl X"

ACCEPT_KEYWORDS="~amd64"


Does anyone see my problem?
Back to top
View user's profile Send private message
Deranger
Veteran
Veteran


Joined: 26 Aug 2004
Posts: 1215

PostPosted: Wed Dec 15, 2004 5:31 pm    Post subject: Reply with quote

jj2f1: I had same problem, this will fix it:
Code:

emerge libtool xorg-x11

I have no idea why libtool has to be recompiled, but it'll fix it :P
Back to top
View user's profile Send private message
jj2f1
n00b
n00b


Joined: 25 Jun 2004
Posts: 12

PostPosted: Wed Dec 15, 2004 5:59 pm    Post subject: Reply with quote

Oktane you the man.

I am past that little problem. Hopefully everything will go smothly from now on.
Back to top
View user's profile Send private message
jj2f1
n00b
n00b


Joined: 25 Jun 2004
Posts: 12

PostPosted: Wed Dec 15, 2004 11:00 pm    Post subject: Reply with quote

Here is another one that seems to be very similar. I was able to install xorg. I could not finish installing the third nvidia package nvidia-settings. This is the error.

Code:
root@slide ~ # emerge nvidia-settings
Calculating dependencies ...done!
>>> emerge (1 of 1) media-video/nvidia-settings-1.0.6629 to /
>>> md5 src_uri ;-) nvidia-settings-1.0.6629.tar.gz
>>> Unpacking source...
>>> Unpacking nvidia-settings-1.0.6629.tar.gz to /var/tmp/portage/nvidia-settings-1.0.6629/work

>>> Source unpacked.
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/command-line.c -o .objs/comman
d-line.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/config-file.c -o .objs/config-
file.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/msg.c -o .objs/msg.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/nvidia-settings.c -o .objs/nvi
dia-settings.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/parse.c -o .objs/parse.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/query-assign.c -o .objs/query-
assign.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/nvgetopt.c -o .objs/nvgetopt.o

cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/image_data/image.c -o .objs/im
age.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkxvideo.c -o .objs/
ctkxvideo.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkcursorshadow.c -o
.objs/ctkcursorshadow.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkui.c -o .objs/ctku
i.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkframelock.c -o .ob
js/ctkframelock.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkgauge.c -o .objs/c
tkgauge.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkcurve.c -o .objs/c
tkcurve.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkcolorcorrection.c
-o .objs/ctkcolorcorrection.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkscale.c -o .objs/c
tkscale.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkmultisample.c -o .
objs/ctkmultisample.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkconfig.c -o .objs/
ctkconfig.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkevent.c -o .objs/c
tkevent.o
src/gtk+-2.x/ctkconfig.c: In function `time_interval_edited':
src/gtk+-2.x/ctkconfig.c:646: warning: comparison is always false due to limited range of data
type
src/gtk+-2.x/ctkconfig.c:647: warning: comparison is always false due to limited range of data
type
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkwindow.c -o .objs/
ctkwindow.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkopengl.c -o .objs/
ctkopengl.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkdevice.c -o .objs/
ctkdevice.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkhelp.c -o .objs/ct
khelp.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkimagesliders.c -o
.objs/ctkimagesliders.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkdisplaydevice.c -o
 .objs/ctkdisplaydevice.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkdisplaydevice-crt.
c -o .objs/ctkdisplaydevice-crt.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkdisplaydevice-tv.c
 -o .objs/ctkdisplaydevice-tv.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkdisplaydevice-dfp.
c -o .objs/ctkdisplaydevice-dfp.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkthermal.c -o .objs
/ctkthermal.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkgvo.c -o .objs/ctk
gvo.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/gtk+-2.x/ctkdropdownmenu.c -o
.objs/ctkdropdownmenu.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/libXNVCtrlAttributes/NvCtrlAtt
ributes.c -o .objs/NvCtrlAttributes.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/libXNVCtrlAttributes/NvCtrlAtt
ributesNvControl.c -o .objs/NvCtrlAttributesNvControl.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/libXNVCtrlAttributes/NvCtrlAtt
ributesVidMode.c -o .objs/NvCtrlAttributesVidMode.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes src/libXNVCtrlAttributes/NvCtrlAtt
ributesXv.c -o .objs/NvCtrlAttributesXv.o
cc -c -march=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_
API -I/usr/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-
1.0 -I/usr/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/in
clude/glib-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -
I src/gtk+-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes g_stamp.c -o .objs/g_stamp.o
cc .objs/command-line.o .objs/config-file.o .objs/msg.o .objs/nvidia-settings.o .objs/parse.o .
objs/query-assign.o .objs/nvgetopt.o .objs/image.o .objs/ctkxvideo.o .objs/ctkcursorshadow.o .o
bjs/ctkui.o .objs/ctkframelock.o .objs/ctkgauge.o .objs/ctkcurve.o .objs/ctkcolorcorrection.o .
objs/ctkscale.o .objs/ctkmultisample.o .objs/ctkconfig.o .objs/ctkevent.o .objs/ctkwindow.o .ob
js/ctkopengl.o .objs/ctkdevice.o .objs/ctkhelp.o .objs/ctkimagesliders.o .objs/ctkdisplaydevice
.o .objs/ctkdisplaydevice-crt.o .objs/ctkdisplaydevice-tv.o .objs/ctkdisplaydevice-dfp.o .objs/
ctkthermal.o .objs/ctkgvo.o .objs/ctkdropdownmenu.o .objs/NvCtrlAttributes.o .objs/NvCtrlAttrib
utesNvControl.o .objs/NvCtrlAttributesVidMode.o .objs/NvCtrlAttributesXv.o .objs/g_stamp.o -mar
ch=athlon64 -pipe -O2 -O -I /usr/X11R6/include -DXTHREADS -D_REENTRANT -DXUSE_MTSAFE_API -I/usr
/include/gtk-2.0 -I//usr/lib/gtk-2.0/include -I/usr/X11R6/include -I/usr/include/atk-1.0 -I/usr
/include/pango-1.0 -I/usr/include/freetype2 -I/usr/include/freetype2/config -I/usr/include/glib
-2.0 -I//usr/lib/glib-2.0/include   -I doc -I src -I src/image_data -I src/xpm_data -I src/gtk+
-2.x -I src/libXNVCtrl -I src/libXNVCtrlAttributes  -Wl,--export-dynamic -L//usr/lib -lgtk-x11-
2.0 -lgdk-x11-2.0 -latk-1.0 -lgdk_pixbuf-2.0 -lm -lpangoxft-1.0 -lpangox-1.0 -lpango-1.0 -lgobj
ect-2.0 -lgmodule-2.0 -ldl -lglib-2.0   -L /usr/X11R6/lib -Wl,-Bstatic -lXxf86vm -lXv -Wl,-Bdyn
amic -lX11 -lXext src/libXNVCtrl/libXNVCtrl.a -o nvidia-settings
/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.3/../../../../x86_64-pc-linux-gnu/bin/ld: src/libXNVCtrl/l
ibXNVCtrl.a(NVCtrl.o): relocation R_X86_64_32 against `a local symbol' can not be used when mak
ing a shared object; recompile with -fPIC
src/libXNVCtrl/libXNVCtrl.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
make: *** [nvidia-settings] Error 1

!!! ERROR: media-video/nvidia-settings-1.0.6629 failed.
!!! Function src_compile, Line 36, Exitcode 2
!!! Failed to build nvidia-settings
!!! If you need support, post the topmost build error, NOT this status message.


This seems to be similar so I tried installing libtools again, but that did not work either. KDE also failed similarly on one of the first few packages.
Back to top
View user's profile Send private message
PhilD
n00b
n00b


Joined: 08 Dec 2004
Posts: 40

PostPosted: Wed Dec 15, 2004 11:56 pm    Post subject: Reply with quote

I too am having problems compiling the sysfsutils. I have tried changing the elibtoolize to

libtoolize --copy --force

in the .ebuild script with no change. I have also tried running it in the /var/tmp/portage/sysfsutils/work/sysfsutils-1.2.0/ directory and then emerging with no success. I am not sure what nelix meant by

ebuild compile install qmerge

but I have hand no luck trying variations of this in different directories either. Help here would be greatly appreciated!!!!

PhilD
Back to top
View user's profile Send private message
linux_on_the_brain
Tux's lil' helper
Tux's lil' helper


Joined: 24 Feb 2004
Posts: 136

PostPosted: Thu Dec 16, 2004 12:14 am    Post subject: Reply with quote

Phild, its odd that it did not work for you. I emerged sysfsutils earlier today with no problem after modifying the ebuild.
Back to top
View user's profile Send private message
linux_on_the_brain
Tux's lil' helper
Tux's lil' helper


Joined: 24 Feb 2004
Posts: 136

PostPosted: Thu Dec 16, 2004 12:40 am    Post subject: Reply with quote

after 2 days of frustration I'm giving up on reiser4, I cant even boot after a fresh install. Hangs/locks up during the boot process. back to reiser3
Back to top
View user's profile Send private message
PhilD
n00b
n00b


Joined: 08 Dec 2004
Posts: 40

PostPosted: Thu Dec 16, 2004 12:24 pm    Post subject: Reply with quote

linux_on_the_brain, yeah, I have that type of luck. Then again, maybe I did something wrong. I went into the /usr/portage/sys-fs/sysfsutils/ directory and changed the elibtoolize in the sysfsutils-1.2.0.ebuild file to libtoolize --copy --force. I then went back to the /usr/portage directory and ran emerge sysfsutils again. Nothing changed. I also went back and verified the change was in the file. I didn't change any other file. If this is correct I will just assume it is my bad luck.

I am out of town for the next few days so it will just have to wait I guess.

PhilD
Back to top
View user's profile Send private message
linux_on_the_brain
Tux's lil' helper
Tux's lil' helper


Joined: 24 Feb 2004
Posts: 136

PostPosted: Thu Dec 16, 2004 8:08 pm    Post subject: Reply with quote

Phild, I wouldnt think it matters but I added the line as follows
libtoolize --force --copy, not sure how you modified the line but it might be something to look at.

Later
Back to top
View user's profile Send private message
Macumba
Tux's lil' helper
Tux's lil' helper


Joined: 13 Sep 2004
Posts: 112

PostPosted: Thu Dec 16, 2004 8:30 pm    Post subject: Reply with quote

Code:

src_unpack() {
        unpack ${A}

        cd ${S}

        aclocal
                libtoolize --force --copy
        autoconf
        automake

        elibtoolize
}
Back to top
View user's profile Send private message
tcostigl
Tux's lil' helper
Tux's lil' helper


Joined: 28 Jul 2004
Posts: 97

PostPosted: Thu Dec 16, 2004 8:32 pm    Post subject: Reply with quote

I am doing a "~x86" install. When doing 'emerge -e system' I had errors on sys-apps/groff and sys-apps/file. I manually downgraded them to unmasked versions and it worked. Just wanted to know I anyone else had the same problems?
Back to top
View user's profile Send private message
ali3nx
l33t
l33t


Joined: 21 Sep 2003
Posts: 620
Location: Winnipeg, Canada

PostPosted: Mon Dec 20, 2004 8:45 pm    Post subject: Re: :( Reply with quote

nelix wrote:
I had issues with groff... so i emerged an older version then resumed merging system... so far so good.

Anyone else have any issues with groff?

[/code]


I added emerge libperl && emerge libperl to the oneliner before emerge system. No more problems with missing perl in the installation.
_________________
Compiling Gentoo since version 1.4
Thousands of Gentoo Installs Completed
Emerged on every continent but Antarctica
Compile long and Prosper!
Back to top
View user's profile Send private message
landon
Apprentice
Apprentice


Joined: 09 Mar 2004
Posts: 159

PostPosted: Tue Dec 21, 2004 5:45 am    Post subject: Reply with quote

Out of curiosity, Ali3nx, how did you go about doing everything on reiser4?

I'm looking at several reiser4-enabled livecd's (other patches included,) and I was wondering which ones worked for you.

You don't need to write a detailed howto (unless you the time to add it,) it'd be great if you can tell me about any possible installation problems I might run into.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Goto page Previous  1, 2, 3 ... 17, 18, 19 ... 23, 24, 25  Next
Page 18 of 25

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum