Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
IPW2200 Centrino B/G wireless card native drivers
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next  
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
kcobain
Apprentice
Apprentice


Joined: 24 Oct 2003
Posts: 221

PostPosted: Mon Jan 17, 2005 11:23 am    Post subject: Reply with quote

Solution to:

Code:

 CC [M]  /var/tmp/portage/ipw2200-0.19/work/ipw2200-0.19/ieee80211_crypt_wep.o
/var/tmp/portage/ipw2200-0.19/work/ipw2200-0.19/ipw2200.c:6598:52: macro "create_workqueue" requires 2 arguments, but only 1 given
/var/tmp/portage/ipw2200-0.19/work/ipw2200-0.19/ipw2200.c: In function `ipw_setup_deferred_work':
/var/tmp/portage/ipw2200-0.19/work/ipw2200-0.19/ipw2200.c:6598: error: `create_workqueue' undeclared (first use in this function)
/var/tmp/portage/ipw2200-0.19/work/ipw2200-0.19/ipw2200.c:6598: error: (Each undeclared identifier is reported only once
/var/tmp/portage/ipw2200-0.19/work/ipw2200-0.19/ipw2200.c:6598: error: for each function it appears in.)
  CC [M]  /var/tmp/portage/ipw2200-0.19/work/ipw2200-0.19/ieee80211_crypt_ccmp.o
make[2]: *** [/var/tmp/portage/ipw2200-0.19/work/ipw2200-0.19/ipw2200.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [_module_/var/tmp/portage/ipw2200-0.19/work/ipw2200-0.19] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.10-nitro4'
make: *** [modules] Error 2


Steps:
Stop the emerge when appear
Code:

>>> source upcaked


Then, edit /var/tmp/portage/ipw2200-0.19/work/ip2200-0.19/ipw2200.c
and change in the line 6598
Code:

   priv->workqueue = create_workqueue (DRV_NAME);

to:
Code:

   priv->workqueue = create_workqueue (DRV_NAME,PF_SYNCTHREAD);


Then start the job again with:
Code:

%1


and wait to emerge ends... :)
Back to top
View user's profile Send private message
jay
l33t
l33t


Joined: 08 May 2002
Posts: 980

PostPosted: Mon Jan 17, 2005 7:41 pm    Post subject: Reply with quote

kcobain wrote:
Hi
I cant emerge ipw2200, it fails with error:

Code:
ieee80211_crypt_ccmp.o


Are you sure that you enabled crypto support in the kernel?
_________________
Do you want your posessions identified? [ynq] (n)
Back to top
View user's profile Send private message
theBlackDragon
l33t
l33t


Joined: 23 Nov 2002
Posts: 762
Location: Gent (Belgium)

PostPosted: Thu Jan 20, 2005 1:01 pm    Post subject: Reply with quote

My connection keeps on dropping out, I'm using the ipw2200 0.21 drivers and keep on getting this in /var/log/messages:
Code:
Jan 20 13:39:44 localhost ifplugd(eth1)[18717]: Executing '/usr/sbin/ifplugd.action eth1 down'.
Jan 20 13:39:46 localhost dhcpcd[23626]: terminating on signal 15
Jan 20 13:39:46 localhost ifplugd(eth1)[18717]: Program executed successfully.
Jan 20 13:40:01 localhost /usr/sbin/cron[24177]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jan 20 13:40:05 localhost ipw2200: Firmware error detected.  Restarting.
Jan 20 13:40:27 localhost ipw2200: Firmware error detected.  Restarting.
Jan 20 13:40:31 localhost ipw2200: Firmware error detected.  Restarting.
Jan 20 13:40:33 localhost ipw2200: Firmware error detected.  Restarting.
Jan 20 13:40:41 localhost ipw2200: Firmware error detected.  Restarting.
Jan 20 13:40:52 localhost ipw2200: Firmware error detected.  Restarting.
Jan 20 13:41:13 localhost ifplugd(eth1)[18717]: Link beat detected.
Jan 20 13:41:14 localhost ifplugd(eth1)[18717]: Executing '/usr/sbin/ifplugd.action eth1 up'.
Jan 20 13:41:15 localhost ifplugd(eth1)[18717]: client:  Configuration not set for eth1 - assuming dhcp
Jan 20 13:41:15 localhost rc-scripts: Configuration not set for eth1 - assuming dhcp
Jan 20 13:41:16 localhost ifplugd(eth1)[18717]: Program executed successfully.

I really can't trust my network connection to stay up for more than half a minute... :( Anybody got any help on this?

tia
_________________
Fvwm|Fvwm forum
Back to top
View user's profile Send private message
groovec
n00b
n00b


Joined: 29 Jun 2004
Posts: 28

PostPosted: Thu Jan 20, 2005 4:42 pm    Post subject: Reply with quote

since 0.21 the firmware is not anymore in the ipw2200 package, you have to emerge them seperately

Code:
emerge -av ipw2200-firmware


maybe this is the reason for the firmware errors in your log
Back to top
View user's profile Send private message
theBlackDragon
l33t
l33t


Joined: 23 Nov 2002
Posts: 762
Location: Gent (Belgium)

PostPosted: Thu Jan 20, 2005 5:02 pm    Post subject: Reply with quote

Code:
# emerge -pv ipw2200-firmware

These are the packages that I would merge, in order:

Calculating dependencies ...done!
[ebuild   R   ] net-wireless/ipw2200-firmware-2.2  0 kB

Total size of downloads: 0 kB

So I do have the firmware installed...

I've tried about everything now: rebuilt my kernel, rebuilt the firmware, rebuilt the driver... I'm really out of ideas now:(
_________________
Fvwm|Fvwm forum
Back to top
View user's profile Send private message
Avatar1983
n00b
n00b


Joined: 22 Apr 2004
Posts: 21
Location: Sheffield, UK

PostPosted: Sun Feb 27, 2005 6:44 pm    Post subject: Reply with quote

I'm having the same problem as theBlackDragon... I get similar dmesg output and the connection cuts. Any ideas anyone?
Back to top
View user's profile Send private message
theBlackDragon
l33t
l33t


Joined: 23 Nov 2002
Posts: 762
Location: Gent (Belgium)

PostPosted: Sun Feb 27, 2005 7:54 pm    Post subject: Reply with quote

It seems like it's really a driver issue that will need to sort itself out, with the 1.0 driver and some earlier ones I could barely stay connected for 5minutes, now I only occasionally get the firmare error message (using 1.0.1 now).

It's still annoying though and the lag I regularly have surely isn't only caused by my internet connection...but at leat it now works, most of the time...
_________________
Fvwm|Fvwm forum
Back to top
View user's profile Send private message
rojanu
Guru
Guru


Joined: 02 Feb 2004
Posts: 361
Location: London

PostPosted: Sun Mar 06, 2005 11:59 pm    Post subject: Reply with quote

i can not connect with my wireless
here is some settings I got on my system

dmesg output
Quote:
dmesg | grep ipw2200
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.1
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Already sending a command
ipw2200: failed to send TX_POWER command
ipw2200: failed to send SCAN_REQUEST_EXT command
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.1
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Firmware error detected. Restarting.


Restarting eth0
Quote:
mobuzun ~ # /etc/init.d/net.eth0 restart
* Starting eth0
* Configuring wireless network for eth0
* eth0 connected to "NETGEAR" at 00:09:5B:4F:63:7E
* in managed mode (WEP disabled)
* Bringing up eth0
* Configuration not set for eth0 - assuming dhcp
* dhcp
* Running dhcpcd ... [ !! ]


here is /etc/conf.d/wireless
Quote:
essid_eth0="aga"
#key_uzunali="s:DFBE006CA96A0E11EFD10CB6FA enc open"
key_aga="61676120696e7465726e657421 enc open"
#key_MU80211TP="s:A0B1C2D3E4F5A1B2C3D4E5F6A2 enc shared"
#preferred_aps=( "uzunali" "aga" "MU80211TP" )
preferred_aps=( "aga" )
channel_eth0="11"
mode_eth0="Managed"


I am using gentoo-dev-sources kernel-2.6.10-r6.
Version of ipw2200 driver is 1.0.1
version of firmware 2.2
Back to top
View user's profile Send private message
Andy1988
n00b
n00b


Joined: 31 Dec 2004
Posts: 24
Location: Nettetal (West Germany)

PostPosted: Mon Mar 07, 2005 12:49 pm    Post subject: Reply with quote

I've got the same Problem!
iwconfig says, that i'm connected with my AP and there is Traffic, if I'm logging it with my Orinoco Card. But I can't Ping any Devices in my Network. It's the same with the Orinoco card. But there isn't the Firmware Error

Both in Kernel 2.6.9 an 2.6.11
Back to top
View user's profile Send private message
theBlackDragon
l33t
l33t


Joined: 23 Nov 2002
Posts: 762
Location: Gent (Belgium)

PostPosted: Mon Mar 07, 2005 2:29 pm    Post subject: Reply with quote

Are you sure it isn't some kind of problem with your Access Point/DHCP Server? As it seems it connects fine to the AP but doesn't manage to obtain an IP-address, I'm having the same problem here atm, but my DHCP-server and my AP are two different devices, also the problem shows up both on Windows and Linux so I doubt it's a driver issue.

The firmware restarting thingy happens occasionally, it hasn't really bugged me lately and I doubt it's the cause of the problem here.
_________________
Fvwm|Fvwm forum
Back to top
View user's profile Send private message
Andy1988
n00b
n00b


Joined: 31 Dec 2004
Posts: 24
Location: Nettetal (West Germany)

PostPosted: Mon Mar 07, 2005 4:09 pm    Post subject: Reply with quote

Yes, you're right!

Now everything works for me! My Orinoco and the IPW2200. Both can get a connection to the AP and now WITH WEP!
I "unmodprobed" the driver, unmerged them an deleted them. After that I re-emerged them and now it works! I don'tknow why and how, but if it works, its OK :D
Back to top
View user's profile Send private message
lucab617
Apprentice
Apprentice


Joined: 07 Jan 2005
Posts: 156
Location: Boston, MA

PostPosted: Wed Mar 16, 2005 4:21 am    Post subject: Reply with quote

Ok well i just got a new thinkpad and for some reason when I untar the ipw driver along with the firmware driver I can install the ipw2200 driver but i cant copy the firmware over to /usr/lib/hotplug/firmware. Even if i try to mkdir /usr/lib/hotplug/firmware it wont let me. When I also try /etc/hotplug/firmware.agent I get Firmware '' event not supported. Any ideas?
Back to top
View user's profile Send private message
Keiss
n00b
n00b


Joined: 19 Sep 2004
Posts: 43
Location: Prague, Czech Republic

PostPosted: Wed Mar 16, 2005 10:43 am    Post subject: Reply with quote

lucab617 wrote:
Ok well i just got a new thinkpad and for some reason when I untar the ipw driver along with the firmware driver I can install the ipw2200 driver but i cant copy the firmware over to /usr/lib/hotplug/firmware. Even if i try to mkdir /usr/lib/hotplug/firmware it wont let me. When I also try /etc/hotplug/firmware.agent I get Firmware '' event not supported. Any ideas?


open the /etc.hotplug/firmware.agent and look for the FIRMWARE_DIR variable, and that is the directory where the firmware files should go. The reason why you got 'Firmware '' event not supported ' is that the script expects additional parameters (you can see it when you open it).

Keiss
Back to top
View user's profile Send private message
lucab617
Apprentice
Apprentice


Joined: 07 Jan 2005
Posts: 156
Location: Boston, MA

PostPosted: Wed Mar 16, 2005 2:56 pm    Post subject: Reply with quote

Well I took a look in the firmware dir and beleive it or not but the FIRMWARE_DIR is /usr/lib/hotplug/firmware. Now I tried copying the files over but no help, it wont let me, saying that the dir doesnt exist and I cant even create it. Any ideas?
Back to top
View user's profile Send private message
Keiss
n00b
n00b


Joined: 19 Sep 2004
Posts: 43
Location: Prague, Czech Republic

PostPosted: Wed Mar 16, 2005 4:39 pm    Post subject: Reply with quote

lucab617 wrote:
Well I took a look in the firmware dir and beleive it or not but the FIRMWARE_DIR is /usr/lib/hotplug/firmware. Now I tried copying the files over but no help, it wont let me, saying that the dir doesnt exist and I cant even create it. Any ideas?


well executing
Code:
mkdir -p /usr/lib/hotplug/firmware

as root should create the directory (unless the fs is mounted readonly ...)

Keiss
Back to top
View user's profile Send private message
patrickclay
n00b
n00b


Joined: 22 Sep 2005
Posts: 1

PostPosted: Thu Sep 22, 2005 4:35 am    Post subject: Aplplications 'freezing' problem Reply with quote

I have been experiencing a very frustrating problem and I would appreciate some suggestions on fixing the problem.

After I run /etc/init.d/net.eth1 start I get the following message:
Code:

 * Starting eth1
 *   Configuring wireless network for eth1
 *     eth1 connected to "MYESSID" at XX:XX:XX:XX:XX:XX
 *     in managed mode (WEP enabled - open)
 *   Bringing up eth1
 *     dhcp
 *       Running dhcpcd ...                                               [ ok ] *       eth1 received address 192.168.2.100


looks great, the www works great!!

However, certain applications tend to delay starting up after I bring up the interface.

Gaim is a particularly frustrating example. After, say, running gaim from a terminal, the cursor will wait about 20 seconds (ouputting nothing, just sitting) then gaim will start up fine. The same applies to XMMS and others.

Some applications will refuse to start up (such as gedit or gnome-terminal). They will just show up in the window list and the cursor will be busy for 20 seconds then the window will disappear.

The second I bring down the interface any of these apps in queue will instantly start up so I can confidently blame bringing up the interface for this problem.

I appreciate any suggestions on the source of this behavior because I have become very frustrated with this problem!!

Thanks!!
Back to top
View user's profile Send private message
theBlackDragon
l33t
l33t


Joined: 23 Nov 2002
Posts: 762
Location: Gent (Belgium)

PostPosted: Thu Sep 22, 2005 10:26 am    Post subject: Re: Aplplications 'freezing' problem Reply with quote

patrickclay wrote:
I have been experiencing a very frustrating problem and I would appreciate some suggestions on fixing the problem.

After I run /etc/init.d/net.eth1 start I get the following message:
Code:

 * Starting eth1
 *   Configuring wireless network for eth1
 *     eth1 connected to "MYESSID" at XX:XX:XX:XX:XX:XX
 *     in managed mode (WEP enabled - open)
 *   Bringing up eth1
 *     dhcp
 *       Running dhcpcd ...                                               [ ok ] *       eth1 received address 192.168.2.100


looks great, the www works great!!

However, certain applications tend to delay starting up after I bring up the interface.

Gaim is a particularly frustrating example. After, say, running gaim from a terminal, the cursor will wait about 20 seconds (ouputting nothing, just sitting) then gaim will start up fine. The same applies to XMMS and others.

Some applications will refuse to start up (such as gedit or gnome-terminal). They will just show up in the window list and the cursor will be busy for 20 seconds then the window will disappear.

The second I bring down the interface any of these apps in queue will instantly start up so I can confidently blame bringing up the interface for this problem.

I appreciate any suggestions on the source of this behavior because I have become very frustrated with this problem!!

Thanks!!


Have you checked your logs? The connection tends to break down for me when I start to max out the connection, I then start getting firmware errors and stuff, streaming music is plain impossible as the connection drops out quite often... If this is the same you are getting it would explain your networked apps waiting for the response of the other side, which gets delayed as the interface is busy behaving flaky...
_________________
Fvwm|Fvwm forum
Back to top
View user's profile Send private message
extragedy
n00b
n00b


Joined: 19 May 2005
Posts: 10

PostPosted: Tue Sep 27, 2005 3:03 am    Post subject: Reply with quote

yay, the whole damn thing will be in the next kernel!! 2.6.14!! It's like the first thing they added to it. Altough i'm not sure how the firmware will be handled since its on a restrictive licence, of wich I don't really knows the details...
Back to top
View user's profile Send private message
lazx888
Tux's lil' helper
Tux's lil' helper


Joined: 13 Sep 2005
Posts: 118

PostPosted: Wed Sep 28, 2005 1:20 am    Post subject: Reply with quote

having problems with emerging ipw2200....


Quote:

>>> emerge (1 of 1) net-wireless/ieee80211-1.0.3 to /
>>> md5 files ;-) ieee80211-1.0.1.ebuild
>>> md5 files ;-) ieee80211-1.0.2.ebuild
>>> md5 files ;-) ieee80211-1.0.3.ebuild
>>> md5 files ;-) ieee80211-1.0.3-r1.ebuild
>>> md5 files ;-) ieee80211-1.0.3-r2.ebuild
>>> md5 files ;-) files/digest-ieee80211-1.0.3-r1
>>> md5 files ;-) files/digest-ieee80211-1.0.3-r2
>>> md5 files ;-) files/ieee80211-1.0.3-broadcast.patch
>>> md5 files ;-) files/ieee80211-1.0.3-open_frag.patch
>>> md5 files ;-) files/ieee80211-1.0.3-keep_restricted_bit.patch
>>> md5 files ;-) files/digest-ieee80211-1.0.1
>>> md5 files ;-) files/digest-ieee80211-1.0.2
>>> md5 files ;-) files/digest-ieee80211-1.0.3
>>> md5 src_uri ;-) ieee80211-1.0.3.tgz
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found sources for kernel version:
* 2.6.14-rc1-mm1
* Checking for suitable kernel configuration options:
>>> Unpacking source...
>>> Unpacking ieee80211-1.0.3.tgz to /var/tmp/portage/ieee80211-1.0.3/work
>>> Source unpacked.
* Preparing ieee80211 module
Checking in /usr/src/linux/ for ieee80211 components...

make -C /usr/src/linux M=/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3 MODVERDIR=/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3 modules
/usr/src/linux/include/config/ieee80211.h
/usr/src/linux/include/net/ieee80211.h
/usr/src/linux/include/net/ieee80211_crypt.h
/usr/src/linux/net/ieee80211
/usr/src/linux/net/ieee80211/ieee80211_crypt.c
/usr/src/linux/net/ieee80211/ieee80211_crypt_ccmp.c
/usr/src/linux/net/ieee80211/ieee80211_crypt_tkip.c
/usr/src/linux/net/ieee80211/ieee80211_crypt_wep.c
/usr/src/linux/net/ieee80211/ieee80211_module.c
/usr/src/linux/net/ieee80211/ieee80211_rx.c
/usr/src/linux/net/ieee80211/ieee80211_tx.c
/usr/src/linux/net/ieee80211/ieee80211_wx.c

Above files found. Remove? [y],n make[1]: Entering directory `/usr/src/linux-2.6.14-rc1-mm1'
CC [M] /var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3/ieee80211_module.o
/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3/ieee80211_module.c:61: error: parse error before "IEEE80211_VERSION"
/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3/ieee80211_module.c: In function `alloc_ieee80211':
/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3/ieee80211_module.c:146: error: structure has no member named `crypt_quiesced'
/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3/ieee80211_module.c: In function `free_ieee80211':
/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3/ieee80211_module.c:171: warning: implicit declaration of function `ieee80211_crypt_quiescing'
/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3/ieee80211_module.c: In function `ieee80211_init':
/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3/ieee80211_module.c:255: error: parse error before "IEEE80211_VERSION"
make[2]: *** [/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3/ieee80211_module.o] Error 1
make[1]: *** [_module_/var/tmp/portage/ieee80211-1.0.3/work/ieee80211-1.0.3] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.14-rc1-mm1'
make: *** [modules] Error 2
make: *** Waiting for unfinished jobs....


relavent parts from kernel config

Quote:


CONFIG_NET_WIRELESS=y

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_TEST=m







any ideas?

thanks
Back to top
View user's profile Send private message
lazx888
Tux's lil' helper
Tux's lil' helper


Joined: 13 Sep 2005
Posts: 118

PostPosted: Wed Sep 28, 2005 1:17 pm    Post subject: Reply with quote

removed the files it was complaining about above and tried emerging with x86 and ~x86... errors:

Quote:
emerge ipw2200
Calculating dependencies ...done!
>>> emerge (1 of 2) net-wireless/ieee80211-1.0.3-r2 to /
>>> md5 files ;-) ieee80211-1.0.1.ebuild
>>> md5 files ;-) ieee80211-1.0.2.ebuild
>>> md5 files ;-) ieee80211-1.0.3.ebuild
>>> md5 files ;-) ieee80211-1.0.3-r1.ebuild
>>> md5 files ;-) ieee80211-1.0.3-r2.ebuild
>>> md5 files ;-) files/digest-ieee80211-1.0.3-r1
>>> md5 files ;-) files/digest-ieee80211-1.0.3-r2
>>> md5 files ;-) files/ieee80211-1.0.3-broadcast.patch
>>> md5 files ;-) files/ieee80211-1.0.3-open_frag.patch
>>> md5 files ;-) files/ieee80211-1.0.3-keep_restricted_bit.patch
>>> md5 files ;-) files/digest-ieee80211-1.0.1
>>> md5 files ;-) files/digest-ieee80211-1.0.2
>>> md5 files ;-) files/digest-ieee80211-1.0.3
>>> md5 src_uri ;-) ieee80211-1.0.3.tgz
* Determining the location of the kernel source code
* Found kernel source directory:
* /usr/src/linux
* Found sources for kernel version:
* 2.6.14-rc1-mm1
* Checking for suitable kernel configuration options:
>>> Unpacking source...
>>> Unpacking ieee80211-1.0.3.tgz to /var/tmp/portage/ieee80211-1.0.3-r2/work
* Applying ieee80211-1.0.3-keep_restricted_bit.patch ... [ ok ]
* Applying ieee80211-1.0.3-open_frag.patch ... [ ok ]
* Applying ieee80211-1.0.3-broadcast.patch ... [ ok ]
>>> Source unpacked.
* Preparing ieee80211 module
Checking in /usr/src/linux/ for ieee80211 components...

make -C /usr/src/linux M=/var/tmp/portage/ieee80211-1.0.3-r2/work/ieee80211-1.0.3 MODVERDIR=/var/tmp/portage/ieee80211-1.0.3-r2/work/ieee80211-1.0.3 modules
#undef CONFIG_IEEE80211
Above definitions found. Comment out? [y], n make[1]: Entering directory `/usr/src/linux-2.6.14-rc1-mm1'
CC [M] /var/tmp/portage/ieee80211-1.0.3-r2/work/ieee80211-1.0.3/ieee80211_module.o
In file included from /var/tmp/portage/ieee80211-1.0.3-r2/work/ieee80211-1.0.3/ieee80211_module.c:54:
/var/tmp/portage/ieee80211-1.0.3-r2/work/ieee80211-1.0.3/net/ieee80211.h:724: error: redefinition of 'is_broadcast_ether_addr'
include/linux/etherdevice.h:73: error: previous definition of 'is_broadcast_ether_addr' was here
make[2]: *** [/var/tmp/portage/ieee80211-1.0.3-r2/work/ieee80211-1.0.3/ieee80211_module.o] Error 1
make[1]: *** [_module_/var/tmp/portage/ieee80211-1.0.3-r2/work/ieee80211-1.0.3] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.14-rc1-mm1'
make: *** [modules] Error 2
make: *** Waiting for unfinished jobs....
Back to top
View user's profile Send private message
swatjen
n00b
n00b


Joined: 03 Sep 2005
Posts: 3
Location: Northern VA

PostPosted: Thu Sep 29, 2005 5:09 am    Post subject: totally lost, would like guidance Reply with quote

I think everything will work fine provided that I can load the module.. I type the following:

# modprobe ipw2200
FATAL: Mdule ipw2200 not found

I have an 8600 Dell Inspiron and dmesg has nothing about ipw2200, it says:


Linux version 2.6.11-gentoo-r6 (root@crackerjack) (gcc version 3.3.5-20050130 (Gentoo Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #3 Thu Jul 21 08:45:37 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffae000 (usable)
BIOS-e820: 000000003ffae000 - 0000000040000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 DELL ) @ 0x000fdf00
ACPI: RSDT (v001 DELL CPi R 0x27d40708 ASL 0x00000061) @ 0x3fff0000
ACPI: FADT (v001 DELL CPi R 0x27d40708 ASL 0x00000061) @ 0x3fff0400
ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000
Allocating PCI resources starting at 40000000 (gap: 40000000:beda0000)
Built 1 zonelists
Kernel command line: root=/dev/ram0 real_root=/dev/hda8 init=/linuxrc
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01703000)
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1495.263 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 903408k/917504k available (3116k kernel code, 13564k reserved, 1132k data, 224k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2957.31 BogoMIPS (lpj=1478656)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Pentium(R) M processor 1.50GHz stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0800)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 814k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfc96e, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:00' and the driver 'system'
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x800-0x805 could not be reserved
pnp: 00:01: ioport range 0x808-0x80f could not be reserved
pnp: match found with the PnP device '00:02' and the driver 'system'
pnp: 00:02: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:02: ioport range 0x806-0x807 has been reserved
pnp: 00:02: ioport range 0x810-0x85f could not be reserved
pnp: 00:02: ioport range 0x860-0x87f has been reserved
pnp: 00:02: ioport range 0x880-0x8bf has been reserved
pnp: 00:02: ioport range 0x8c0-0x8df has been reserved
pnp: match found with the PnP device '00:07' and the driver 'system'
pnp: 00:07: ioport range 0x900-0x97f has been reserved
audit: initializing netlink socket (disabled)
audit(1127949811.021:0): initialized
inotify device minor=63
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855PM Chipset.
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: AGP aperture is 128M @ 0xe0000000
vesafb: ATI Technologies Inc., P10 , 01.00 (OEM: ATI MOBILITY RADEON 9600 )
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:5a0d
vesafb: pmi: set display start = c00c5a7b, set palette = c00c5ab5
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 200x75
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 131008k
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PBTN]
ACPI: Sleep Button (CM) [SBTN]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (57 C)
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
pnp: the driver 'serial' has been registered
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
ALPS Touchpad (Glidepoint) detected
Enabling hardware tapping
input: AlpsPS/2 ALPS TouchPad on isa0060/serio1
pnp: the driver 'parport_pc' has been registered
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xbfa8-0xbfaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HTS726060M9AT00, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG CDRW/DVD SN-324S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:02:01.1[A] -> GSI 11 (level, low) -> IRQ 11
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[faffd800-faffdfff] Max Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 11, pci mem 0xf4fffc00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 11, io base 0xbf80
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 11, io base 0xbf40
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 11, io base 0xbf20
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
i2c /dev entries driver
Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC).
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49481 usecs
intel8x0: clocking to 48000
ALSA device list:
#0: Intel 82801DB-ICH4 with STAC9750/51 at 0xf4fff800, irq 7
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
ip_conntrack version 2.1 (7168 buckets, 57344 max) - 212 bytes per conntrack
ieee1394: Host added: ID:BUS[0-00:1023] GUID[364fc00033434ca1]
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
LID PBTN PCI0 USB0 USB1 USB2 USB3 MODM PCIE
ACPI: (supports S0 S1 S3 S4 S4bios S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 224k freed
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
Adding 987988k swap on /dev/hda7. Priority:-1 extents:1
FAT: Unrecognized mount option "notail" or missing value
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 803 MBytes.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[fglrx] module loaded - fglrx 8.8.25 [Jan 14 2005] on minor 0
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
[fglrx:firegl_unlock] *ERROR* Process 8516 using kernel context 0
b44.c:v0.95 (Aug 3, 2004)
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0f:1f:23:9c:b8
b44: eth0: Link is down.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is on for TX and on for RX.
atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.


Note: I can modprobe b44 to use my NIC.. something about this module is driving me crazy!
Back to top
View user's profile Send private message
swatjen
n00b
n00b


Joined: 03 Sep 2005
Posts: 3
Location: Northern VA

PostPosted: Sun Oct 02, 2005 4:40 pm    Post subject: Reply with quote

I talked to a friend of mine and he led me to discover that the reason I could not modprobe ipw2200 was because I had booted from a different kernel image than the one that my linux symlink was pointing to.. that was resolved by using an option of modprobe to reference the kernel that had the module in its subdirectory.

I also rebuilt the kernel using the latest gentoo-sources 2.6.12-r10

So I modprobe ieee80211_crypt no prob.
however, another dependency of ipw2200 is ieee80211
this module is coming back with

FATAL: error inserting ieee80211 (/lib/modules/2.6.12-gentoo-r10/net/ieee80211/ieee80211.ko): Unknown symbol in module, or unknown parameter (see dmesg)

and my tail of dmesg is -

ieee80211_crypt: registered algorithm 'NULL'
ieee80211: Unknown symbol wireless_spy_update

my journey continues for wireless ;)
If you have any suggestions, I'm all ears.
Back to top
View user's profile Send private message
eltech
Guru
Guru


Joined: 05 Nov 2002
Posts: 582
Location: New York

PostPosted: Mon Oct 03, 2005 12:15 am    Post subject: Reply with quote

very weird connection issue with no real messages in the logs ..

i have configured /etc/conf.d/wireless and /etc/conf.d/net

the net file contains
Code:

config_eth1=( "192.168.2.102 netmask 255.255.255.0" )
routes_eth1=( "default gw 192.168.2.1" )


I use static ips on my network

the wireless config file is the standard, but i only have the following uncommented and configured
Code:

essid_eth1="myessid"
mode_eth1="ad-hoc"
channel_eth1="6"
key_internal="s:00-12-34-56-78 enc open"
preferred_aps=( "myessid" )


now when i try to start the connection .. here is what i get ..
Code:

/etc/init.d/net.eth1 restart
 * Starting eth1
 *   Configuring wireless network for eth1
 *     eth1 connected to "myessid" at 00:00:00:00:00:00
 *     in ad-hoc mode (WEP enabled - open)
 *   Bringing up eth1
 *     192.168.2.102                                                                             [ ok ]
 *   Adding routes
 *     default gw 192.168.2.1 ...                                                            [ !! ]
 


So now i thought i did it all right, but obviously not... :roll:

iwconfig shows the following..

Code:

eth1      IEEE 802.11g  ESSID:"myessid"  Nickname:"myessid"
          Mode:Ad-Hoc  Frequency:2.437 GHz  Cell: 02:0E:35:3C:65:11
          Bit Rate=54 Mb/s   Tx-Power=20 dBm
          Retry limit:7   RTS thr:off   Fragment thr:off
          Encryption key:1234-5678-322D-3765-2D33-652D-34   Security mode:open
          Power Management:off
          Link Quality:98  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:1170   Missed beacon:0


lsmod shows...

Code:

ieee80211_crypt_wep     3972  -
ipw2200               176776  -
firmware_class          7264  -
ieee80211              45316  -
ieee80211_crypt         4616



ANy help is greatly appreciated..
Back to top
View user's profile Send private message
JonSnow
n00b
n00b


Joined: 06 Nov 2004
Posts: 40
Location: Hannover - Germany

PostPosted: Mon Oct 03, 2005 11:20 am    Post subject: Reply with quote

routes_eth1=( "default via 192.168.2.1" )

see:
/etc/conf.d/net.example line 106 - 110
Back to top
View user's profile Send private message
eltech
Guru
Guru


Joined: 05 Nov 2002
Posts: 582
Location: New York

PostPosted: Mon Oct 03, 2005 11:50 am    Post subject: Reply with quote

JonSnow wrote:
routes_eth1=( "default via 192.168.2.1" )

see:
/etc/conf.d/net.example line 106 - 110
hi Jon,

dont know if you were trying to help me out.. but .. that doesnt work either.. same result..
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Goto page Previous  1, 2, 3, 4, 5, 6, 7  Next
Page 6 of 7

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum