Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[HOWTO] Logitech DiNovo under Linux Gentoo
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next  
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
Valentin
n00b
n00b


Joined: 17 Jul 2004
Posts: 9

PostPosted: Sat Nov 20, 2004 3:31 pm    Post subject: Reply with quote

If someone needs a config for lineak (used keyboard: Logitech diNovo Media Desktop [german]):

/etc/lineakkb.def
Code:

 [LTDINOVO]
    brandname = "Logitech"
    modelname = "DiNovo"
   [KEYS]
        Sleep           = 227
        Home            = 130
        Mail            = 236
        Search          = 122
        Media           = 129
        VolDown         = 174
        VolUp           = 176
        Mute            = 160
        Stop            = 164
        Play            = 162
        Rewind          = 144
        Forward         = 153
   [END KEYS]
 [END LTDINOVO]


than: "lineakd -c LTDINOVO" to create a blank config file for the lineakd-daemon (~/.lineak/lineakd.conf)
Back to top
View user's profile Send private message
xannor
n00b
n00b


Joined: 09 Jan 2003
Posts: 8

PostPosted: Sun Dec 12, 2004 10:02 pm    Post subject: Additional Tips N Tricks for DiNovo Reply with quote

I dont know if this is covered elsewere in the forums. (or even if I am doing it the best way) but I have a way to eliminate the need for running HID2HCI on boot and manually after the device gets disconnected /reconnected.

I have acheived this through the used of UDEV (my version is 048 but it shoule work in older versons as well, untested)

My first part is a UDEV rule
Code:

#Rename Run HID2HCI on DiNovo Insert
KERNEL="hiddev*", SYSFS{idVendor}="0451", SYSFS{idProduct}="2036", PROGRAM="/etc/udev/scripts/diNovo.sh usb/%k", NAME="usb/%k"

I put this rule in /etc/udev/rules.d/10-local.rule

This code should get run everytime the hiddev device for the receiver is found.

the second part is the custom PROGRAM script used in the udev rule.
Code:

#!/bin/sh

if [[ "$ACTION" == "add" ]] && [[ "x$2" == "x" ]]; then
        start-stop-daemon --start -b --exec $0 $1 x
        echo "ok"
elif [[ "x$2" == "xx" ]]; then
        while [[ ! -c /dev/$1 ]]; do
                sleep 1
        done
        /usr/sbin/hid2hci --tohci
fi

I saved this code as /etc/udev/scripts/DiNovo.sh (and it must be executable!)

This code will work around the fact that the hiddev has not been created yet (though it seems to be necessary for hid2hci to work correctly)

With this code installed, everytime you plug in (or the system otherwise recognises) your adaptor it will run hid2hci so it is in hci mode.

I am still trying to come up with a solution to "not being able to use the adapter as a HID device once it is in HCI mode" (for bios and bootloader modes after reboot.) I think it could be done if we had a way to reset the device during shutdown, but I do not know how to do that. any takers?
Back to top
View user's profile Send private message
sibov
Tux's lil' helper
Tux's lil' helper


Joined: 09 Feb 2004
Posts: 147
Location: Germany

PostPosted: Sat Dec 25, 2004 10:10 pm    Post subject: Reply with quote

Hi guys,

i have successfully set up my bluetooth stuff, but the keyboard won't connect.

Mediapad and Mouse works very well but the keyboard doesn't pair.

does anybody have a hint?

Thanx in advane. :wink:

[EDIT]

:roll: I don't know why but after reboot without second keyboard and mouse my bluetooht keyboard also connect quite well.

But one Question: Is it really correct in /etc/bluetooth/hci.conf
to setup the local device class with
class class 0x120301; ????????
i only setup class 0x120301;

:roll:
_________________
Gentoo 2.6.17-gentoo-r5 with dmraid Raid0 Dualboot
AMD64 X2 3800+, 4x512MB DDR PC3200Pro Corsair Geforce EN6600GT silencer @ 256MB
4x250GB SATAII Samsung SP120, Asus A8N Premium, Plextor PX712SA DVDRW
Logitech Dinovo, SB Audigy4
Back to top
View user's profile Send private message
sibov
Tux's lil' helper
Tux's lil' helper


Joined: 09 Feb 2004
Posts: 147
Location: Germany

PostPosted: Sat Dec 25, 2004 10:34 pm    Post subject: Re: Additional Tips N Tricks for DiNovo Reply with quote

xannor wrote:
I dont know if this is covered elsewere in the forums. (or even if I am doing it the best way) but I have a way to eliminate the need for running HID2HCI on boot and manually after the device gets disconnected /reconnected.

I have acheived this through the used of UDEV (my version is 048 but it shoule work in older versons as well, untested)

My first part is a UDEV rule
Code:

#Rename Run HID2HCI on DiNovo Insert
KERNEL="hiddev*", SYSFS{idVendor}="0451", SYSFS{idProduct}="2036", PROGRAM="/etc/udev/scripts/diNovo.sh usb/%k", NAME="usb/%k"

I put this rule in /etc/udev/rules.d/10-local.rule

This code should get run everytime the hiddev device for the receiver is found.

the second part is the custom PROGRAM script used in the udev rule.
Code:

#!/bin/sh

if [[ "$ACTION" == "add" ]] && [[ "x$2" == "x" ]]; then
        start-stop-daemon --start -b --exec $0 $1 x
        echo "ok"
elif [[ "x$2" == "xx" ]]; then
        while [[ ! -c /dev/$1 ]]; do
                sleep 1
        done
        /usr/sbin/hid2hci --tohci
fi

I saved this code as /etc/udev/scripts/DiNovo.sh (and it must be executable!)

This code will work around the fact that the hiddev has not been created yet (though it seems to be necessary for hid2hci to work correctly)

With this code installed, everytime you plug in (or the system otherwise recognises) your adaptor it will run hid2hci so it is in hci mode.

I am still trying to come up with a solution to "not being able to use the adapter as a HID device once it is in HCI mode" (for bios and bootloader modes after reboot.) I think it could be done if we had a way to reset the device during shutdown, but I do not know how to do that. any takers?


Thanx Xannor for the UDEV stuff! :D

But how do I get the iVendor and the iProduct IDs?

From which device?
Code:

*-usb:0
                      description: Keyboard
                      product: USB Receiver
                      vendor: Logitech
                      physical id: 0
                      bus info: usb@4:0:0
                      version: 24.04
                      serial: 195564
                      capabilities: usb-1.10
                      configuration: driver=usbhid maxpower=98mA speed=1.5MB/s
                 *-usb:1
                      description: Bluetooth wireless interface
                      product: Logitech Bluetooth wireless hub
                      vendor: Logitech
                      physical id: 1
                      bus info: usb@4:0:1
                      version: 8.46
                      serial: 195564
                      capabilities: bluetooth usb-1.10
                      configuration: driver=hci_usb maxpower=100mA speed=12.0MB/s

_________________
Gentoo 2.6.17-gentoo-r5 with dmraid Raid0 Dualboot
AMD64 X2 3800+, 4x512MB DDR PC3200Pro Corsair Geforce EN6600GT silencer @ 256MB
4x250GB SATAII Samsung SP120, Asus A8N Premium, Plextor PX712SA DVDRW
Logitech Dinovo, SB Audigy4
Back to top
View user's profile Send private message
xannor
n00b
n00b


Joined: 09 Jan 2003
Posts: 8

PostPosted: Fri Jan 21, 2005 3:16 am    Post subject: Re: Additional Tips N Tricks for DiNovo Reply with quote

sibov wrote:

Thanx Xannor for the UDEV stuff! :D


NP

sibov wrote:

But how do I get the iVendor and the iProduct IDs?

From which device?
Code:

*-usb:0
                      description: Keyboard
                      product: USB Receiver
                      vendor: Logitech
                      physical id: 0
                      bus info: usb@4:0:0
                      version: 24.04
                      serial: 195564
                      capabilities: usb-1.10
                      configuration: driver=usbhid maxpower=98mA speed=1.5MB/s
                 *-usb:1
                      description: Bluetooth wireless interface
                      product: Logitech Bluetooth wireless hub
                      vendor: Logitech
                      physical id: 1
                      bus info: usb@4:0:1
                      version: 8.46
                      serial: 195564
                      capabilities: bluetooth usb-1.10
                      configuration: driver=hci_usb maxpower=100mA speed=12.0MB/s


To get the ID's and other info requires a little deep searching of how UDEV works.

The simplest way is to run hid2hci then use udevinfo to get all the info for the device..

Code:

udevinfo -ap /sys/class/bluetooth/hci0


the -a means all and the -p is the sysfs path to the devices (hci0 if it is the first bluetooth device).

you get a huge dump of info when you do this, ex:

Code:

udevinfo starts with the device the node belongs to and then walks up the
device chain, to print for every device found, all possibly useful attributes
in the udev key format.
Only attributes within one device section may be used together in one rule,
to match the device for which the node will be created.

  looking at class device '/sys/class/bluetooth/hci0':
    SYSFS{address}="08:00:17:12:93:C0"
    SYSFS{flags}="0x1d"
    SYSFS{name}="hci0"
    SYSFS{type}="1"

follow the class device's "device"
  looking at the device chain at '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0':
    BUS="usb"
    ID="3-2:1.0"
    SYSFS{bAlternateSetting}=" 0"
    SYSFS{bInterfaceClass}="e0"
    SYSFS{bInterfaceNumber}="00"
    SYSFS{bInterfaceProtocol}="01"
    SYSFS{bInterfaceSubClass}="01"
    SYSFS{bNumEndpoints}="03"
    SYSFS{detach_state}="0"

  looking at the device chain at '/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2':
    BUS="usb"
    ID="3-2"
    SYSFS{bConfigurationValue}="1"
    SYSFS{bDeviceClass}="e0"
    SYSFS{bDeviceProtocol}="01"
    SYSFS{bDeviceSubClass}="01"
    SYSFS{bMaxPower}="500mA"
    SYSFS{bNumConfigurations}="1"
    SYSFS{bNumInterfaces}=" 2"
    SYSFS{bcdDevice}="0100"
    SYSFS{bmAttributes}="80"
    SYSFS{detach_state}="0"
    SYSFS{devnum}="2"
    SYSFS{idProduct}="0807"
    SYSFS{idVendor}="0400"
    SYSFS{maxchild}="0"
    SYSFS{speed}="12"
    SYSFS{version}=" 1.10"

  looking at the device chain at '/sys/devices/pci0000:00/0000:00:10.1/usb3':
    BUS="usb"
    ID="usb3"
    SYSFS{bConfigurationValue}="1"
    SYSFS{bDeviceClass}="09"
    SYSFS{bDeviceProtocol}="00"
    SYSFS{bDeviceSubClass}="00"
    SYSFS{bMaxPower}="  0mA"
    SYSFS{bNumConfigurations}="1"
    SYSFS{bNumInterfaces}=" 1"
    SYSFS{bcdDevice}="0206"
    SYSFS{bmAttributes}="c0"
    SYSFS{detach_state}="0"
    SYSFS{devnum}="1"
    SYSFS{idProduct}="0000"
    SYSFS{idVendor}="0000"
    SYSFS{manufacturer}="Linux 2.6.10-ck4 uhci_hcd"
    SYSFS{maxchild}="2"
    SYSFS{product}="VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)"
    SYSFS{serial}="0000:00:10.1"
    SYSFS{speed}="12"
    SYSFS{version}=" 1.10"

  looking at the device chain at '/sys/devices/pci0000:00/0000:00:10.1':
    BUS="pci"
    ID="0000:00:10.1"
    SYSFS{class}="0x0c0300"
    SYSFS{detach_state}="0"
    SYSFS{device}="0x3038"
    SYSFS{irq}="193"
    SYSFS{local_cpus}="1"
    SYSFS{subsystem_device}="0x2032"
    SYSFS{subsystem_vendor}="0x161f"
    SYSFS{vendor}="0x1106"

  looking at the device chain at '/sys/devices/pci0000:00':
    BUS=""
    ID="pci0000:00"
    SYSFS{detach_state}="0"


udevinfo starts at the device class (in this case) and works its way backwards to the root system bus. In the case of the example above the first idVendor and idProduct from the top is the ID for the USB device. Sometimes it takes some trial and error. lsusb can also show this info, but UDEV is picky about format so it is best to match what udevinfo shows.

Hope this helps, sorry for the late reply.
Back to top
View user's profile Send private message
timbo
Apprentice
Apprentice


Joined: 29 Jul 2002
Posts: 231
Location: New Zealand

PostPosted: Sat Jan 22, 2005 8:12 am    Post subject: Reply with quote

Great help BUT....

I splashed out and got a Logitech Elite KB for xmas, set up xorg and kde and everything was sweet all the keys worked....

Updated xorg today and all the changes to the config files (inet, etc) got overwritten! back to square one.... :(

Regards
Tim
8)
_________________
Linux User: 303160
Back to top
View user's profile Send private message
StinkingMonkey
Apprentice
Apprentice


Joined: 24 May 2003
Posts: 183
Location: UK

PostPosted: Sat Jan 29, 2005 2:40 pm    Post subject: Reply with quote

well thanks for the howto, got my diNovo desktop 2.0 working :), bit of a pain it not working during grub but ho hum, the media pad does have some functionality, if i start up xmms i can open the file list, adjust volume, fast forward on a track, reverse, i have to be focused on xmms though, so the media pad can hopefully be made functional by some coding guru :)
_________________
Intel Q6600, Asus P5N32-E SLI, Audigy2 ZS, Gainward 7950
Back to top
View user's profile Send private message
djnauk
Apprentice
Apprentice


Joined: 11 Feb 2003
Posts: 183
Location: Caerphilly, Wales, UK

PostPosted: Wed Feb 16, 2005 4:01 pm    Post subject: Reply with quote

Could someone please tell me what I'm doing wrong?

I got the new diNovo Desktop 2.0 version on sunday, and as of yet I can't seam to get it working in bluetooth. Although, from what I can gather, the system just isn't running bluetooth though it at all. When I run gnome-bluetooth-manager it just says

Quote:
Could not find Bluetooth devices on the system.
Please make sure your bluetooth adapter is correctly plugged in your machine.


I've followed all the settings as per the guide, but nothing seams to happen, running hid2hci just gives:

Code:
jonathan root # hid2hci
No devices in HCI mode found


Running hcitool shows up nothing:

Code:
jonathan root # hcitool inq
Inquiring ...
Inquiry failed.: No such device
jonathan root # hcitool scan
Device is not available: Success
jonathan root # hcitool dev
Devices:
jonathan root # hcitool cc 00:07:61:22:51:1e [b]//this is my mouse[/b]
Device is not available.


udevinfo doesn't have anything on hci

Code:
jonathan root # udevinfo -ap /sys/class/bluetooth/hci0
couldn't get the class device


all the modules are loaded

Code:
jonathan root # lsmod
Module                  Size  Used by
usbhid                 30400  0
usblp                  11456  0
[b]uhci_hcd               30800  0
hci_usb                13512  0[/b]
isofs                  25156  1
nls_iso8859_1           4224  5
cifs                  201596  4
nls_base                6784  3 isofs,nls_iso8859_1,cifs
snd_seq_midi            6880  0
snd_emu10k1_synth       7232  0
snd_emux_synth         35968  1 snd_emu10k1_synth
snd_seq_virmidi         6464  1 snd_emux_synth
snd_seq_midi_emul       7232  1 snd_emux_synth
snd_pcm_oss            48996  0
snd_mixer_oss          18048  1 snd_pcm_oss
snd_seq_oss            32640  0
snd_seq_midi_event      6592  3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
snd_seq                51152  8 snd_seq_midi,snd_emux_synth,snd_seq_virmidi,     \
                                snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event
snd_emu10k1            93316  1 snd_emu10k1_synth
snd_rawmidi            20640  3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
snd_seq_device          7436  7 snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,   \
                                snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
snd_ac97_codec         72928  1 snd_emu10k1
snd_pcm                84996  3 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
snd_timer              21636  2 snd_seq,snd_pcm
snd_page_alloc          7940  2 snd_emu10k1,snd_pcm
snd_util_mem            3712  2 snd_emux_synth,snd_emu10k1
snd_hwdep               7812  2 snd_emux_synth,snd_emu10k1
snd                    47460  13 snd_emux_synth,snd_seq_virmidi,snd_pcm_oss,    \
                                 snd_mixer_oss,snd_seq_oss,snd_seq,snd_emu10k1, \
                                 snd_rawmidi,snd_seq_device,snd_ac97_codec,     \
                                 snd_pcm,snd_timer,snd_hwdep
soundcore               7840  1 snd
[b]usbcore                76672  4 usbhid,usblp,uhci_hcd,hci_usb
hidp                   26816  2
bnep                   12928  2
rfcomm                 35672  4
l2cap                  22912  14 hidp,bnep,rfcomm
sco                    11648  0
bluetooth              44804  8 hci_usb,hidp,bnep,rfcomm,l2cap,sco[/b]
e100                   32320  0
mii                     4416  1 e100


I've checked and double checked all the configuration settings - where am I going wrong?

.config
Code:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-gentoo-r7
# Wed Feb 16 14:39:37 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y

#
# General setup
#
CONFIG_LOCALVERSION="-djnauk-b02"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SOFTWARE_SUSPEND is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PC-card bridges
#

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_QLA6322 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
# CONFIG_IEEE1394_ETH1394 is not set
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
[b]CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set[/b]
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
CONFIG_E100_NAPI=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_RAW is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_INOTIFY=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m

#
# Video For Linux
#

#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_VESA_STD is not set
CONFIG_FB_VESA_TNG=y
CONFIG_FB_VESA_DEFAULT_MODE="1280x1024@60"
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_FB_SPLASH is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
CONFIG_SPEAKUP_DEFAULT="none"

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VX222 is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
[b]CONFIG_USB=m[/b]
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y

#
# USB Host Controller Drivers
#
[b]CONFIG_USB_EHCI_HCD=m[/b]
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OHCI_HCD is not set
[b]CONFIG_USB_UHCI_HCD=m[/b]
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set

#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
[b]CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y[/b]
# CONFIG_HID_FF is not set
[b]CONFIG_USB_HIDDEV=y[/b]

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set

#
# USB ATM/DSL drivers
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=m
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="850"
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_EARLY_PRINTK=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_SMP=y

CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y


/etc/conf.d/bluetooth
Code:

# Bluetooth configuraton file

# Start of hcid (allowed values are "true" and "false")
HCID_ENABLE=true

# Config file for hcid
HCID_CONFIG="/etc/bluetooth/hcid.conf"

# Start sdpd (allowed values are "true" and "false")
SDPD_ENABLE=true

# Start hidd (allowed values are "true" and "false")
HIDD_ENABLE=true

# Arguments to hidd
HIDD_OPTIONS=""

# Run hid2hci (allowed values are "true" and "false")
HID2HCI_ENABLE=true

# Bind rfcomm devices (allowed values are "true" and "false")
RFCOMM_ENABLE=true

# Config file for rfcomm
RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf"

# Start dund (allowed values are "true" and "false")
DUND_ENABLE=true

# Arguments to dund
DUND_OPTIONS="--listen --persist"

# Start pand (allowed values are "true" and "false")
PAND_ENABLE=true

# Arguments to pand
PAND_OPTIONS="--listen --role NAP"


/etc/init.d/bluetooth
Code:
#!/sbin/runscript
# Copyright 1999-2004 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-wireless/bluez-utils/files/2.10-r1/bluetooth.rc,v 1.3 2004/10/22 07:53:01 liquidx Exp $

UART_CONF="/etc/bluetooth/uart"

depend() {
   after hotplug
}

start_uarts() {
   [ -f /usr/sbin/hciattach -a -f ${UART_CONF} ] || return
   grep -v '^#' ${UART_CONF} | while read i; do
      /usr/sbin/hciattach $i
   done      
}

stop_uarts() {
   killall hciattach > /dev/null 2>&1
}

start() {
      ebegin "Starting Bluetooth"

   if [ "${HCID_ENABLE}" = "true" -a -x /usr/sbin/hcid ]; then
      if [ -f "${HCID_CONFIG}" ]; then
         ebegin "    Starting hcid"
         start-stop-daemon --start --quiet \
            --exec /usr/sbin/hcid -- -f $HCID_CONFIG
         eend $?
       else
         ewarn "Not enabling hcid because HCID_CONFIG is missing."
       fi
   fi
   

   if [ "${SDPD_ENABLE}" = "true" -a -x /usr/sbin/sdpd ]; then
      ebegin "    Starting sdpd"
      start-stop-daemon --start --quiet --exec /usr/sbin/sdpd
      eend $?
   fi

   
   if [ "${HIDD_ENABLE}" = "true" -a -x /usr/bin/hidd ]; then
      ebegin "    Starting hidd"
      start-stop-daemon --start --quiet \
         --exec /usr/bin/hidd -- ${HIDD_OPTIONS} --server
      eend $?
   fi


   if [ "${HID2HCI_ENABLE}" = "true" -a -x /usr/sbin/hid2hci ]; then
      ebegin "    Running hid2hci"
      /usr/sbin/hid2hci -0 -q    #be quiet
      eend $?
   fi

   if [ "${RFCOMM_ENABLE}" = "true" -a -x /usr/bin/rfcomm ]; then
      if [ -f "${RFCOMM_CONFIG}" ]; then
         ebegin "    Starting rfcomm"
         /usr/bin/rfcomm -f ${RFCOMM_CONFIG} bind all
         eend $?
      else
         ewarn "Not enabling rfcomm because RFCOMM_CONFIG does not exists"
      fi
   fi

   if [ "${DUND_ENABLE}" = "true" -a -x /usr/bin/dund ]; then
      if [ -n "${DUND_OPTIONS}" ]; then
         ebegin "    Starting dund"
         start-stop-daemon --start --quiet \
            --exec /usr/bin/dund -- ${DUND_OPTIONS}
         eend $?
      else
         ewarn "Not starting dund because DUND_OPTIONS not defined."
      fi
   fi

   if [ "${PAND_ENABLE}" = "true" -a -x /usr/bin/pand ]; then
      if [ -n "${PAND_OPTIONS}" ]; then
         ebegin "    Starting pand"
         start-stop-daemon --start --quiet \
            --exec /usr/bin/pand -- ${PAND_OPTIONS}
         eend $?
      else
         ewarn "Not starting pand because PAND_OPTIONS not defined."
      fi
   fi

   start_uarts
   eend 0
}
   
stop() {
   ebegin "Shutting down Bluetooth"


   if [ "${PAND_ENABLE}" = "true" -a -x /usr/bin/pand ]; then
      ebegin "    Stopping pand"
      start-stop-daemon --stop --quiet --exec /usr/bin/pand
      eend $?
   fi

   if [ "${DUND_ENABLE}" = "true" -a -x /usr/bin/dund ]; then
      ebegin "    Stopping dund"
      start-stop-daemon --stop --quiet --exec /usr/bin/dund
      eend $?
   fi

   if [ "${RFCOMM_ENABLE}" = "true" -a -x /usr/bin/rfcomm ]; then
      ebegin "    Stopping rfcomm"
      /usr/bin/rfcomm release all
      eend $?
   fi

   if [ "${HIDD_ENABLE}" = "true" -a -x /usr/bin/hidd ]; then
      ebegin "    Stopping hidd"
      start-stop-daemon --stop --quiet --exec /usr/bin/hidd
      eend $?   
   fi


   if [ "${SDPD_ENABLE}" = "true" -a -x /usr/sbin/sdpd ]; then
      ebegin "    Stopping sdpd"
      start-stop-daemon --stop --quiet --exec /usr/sbin/sdpd
      eend $?
   fi

   if [ "${HCID_ENABLE}" = "true" -a -x /usr/sbin/hcid ]; then
      ebegin "    Stopping hcid"
      start-stop-daemon --stop --quiet --exec /usr/sbin/hcid
      eend $?
   fi
      
   stop_uarts
   eend 0
}

restart() {
   svc_stop
   svc_start
}


/etc/bluetooth/hcid.conf
Code:
#
# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.6 2004/10/26 02:31:22 holtmann Exp $
#

# HCId options
options {
   # Automatically initialize new devices
   autoinit yes;

   # Security Manager mode
   #   none - Security manager disabled
   #   auto - Use local PIN for incoming connections
   #   user - Always ask user for a PIN
   #
   security user;

   # Pairing mode
   #   none  - Pairing disabled
   #   multi - Allow pairing with already paired devices
   #   once  - Pair once and deny successive attempts
   pairing multi;

   # PIN helper
   pin_helper /usr/bin/bluepin;

   # D-Bus PIN helper
   #dbus_pin_helper;
}

# Default settings for HCI devices
device {
   # Local device name
   #   %d - device id
   #   %h - host name
   name "BlueZ (%d)";

   # Local device class
   class 0x3e0100;

   # Default packet type
   #pkt_type DH1,DM1,HV1;

   # Inquiry and Page scan
   iscan enable; pscan enable;

   # Default link mode
   #   none   - no specific policy
   #   accept - always accept incoming connections
   #   master - become master on incoming connections,
   #            deny role switch on outgoing connections
   #
   #lm accept,master;
   #
   lm accept;

   # Default link policy
   #   none    - no specific policy
   #   rswitch - allow role switch
   #   hold    - allow hold mode
   #   sniff   - allow sniff mode
   #   park    - allow park mode
   #
   #lp hold,sniff;
   #
   lp rswitch,hold,sniff,park;

   # Authentication and Encryption
   auth disable;
   #encrypt enable;
}


/etc/bluetooth/rfcomm.conf
Code:
#
# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.6 2004/10/26 02:31:22 holtmann Exp $
#

# HCId options
options {
   # Automatically initialize new devices
   autoinit yes;

   # Security Manager mode
   #   none - Security manager disabled
   #   auto - Use local PIN for incoming connections
   #   user - Always ask user for a PIN
   #
   security user;

   # Pairing mode
   #   none  - Pairing disabled
   #   multi - Allow pairing with already paired devices
   #   once  - Pair once and deny successive attempts
   pairing multi;

   # PIN helper
   pin_helper /usr/bin/bluepin;

   # D-Bus PIN helper
   #dbus_pin_helper;
}

# Default settings for HCI devices
device {
   # Local device name
   #   %d - device id
   #   %h - host name
   name "BlueZ (%d)";

   # Local device class
   class 0x3e0100;

   # Default packet type
   #pkt_type DH1,DM1,HV1;

   # Inquiry and Page scan
   iscan enable; pscan enable;

   # Default link mode
   #   none   - no specific policy
   #   accept - always accept incoming connections
   #   master - become master on incoming connections,
   #            deny role switch on outgoing connections
   #
   #lm accept,master;
   #
   lm accept;

   # Default link policy
   #   none    - no specific policy
   #   rswitch - allow role switch
   #   hold    - allow hold mode
   #   sniff   - allow sniff mode
   #   park    - allow park mode
   #
   #lp hold,sniff;
   #
   lp rswitch,hold,sniff,park;

   # Authentication and Encryption
   auth disable;
   #encrypt enable;
}


/etc/modules.autoload.d/kernel-2.6
Code:
# /etc/modules.autoload.d/kernel-2.6:  kernel modules to load when system boots.
# $Header: /var/cvsroot/gentoo-src/rc-scripts/etc/modules.autoload.d/kernel-2.6,v 1.1 2003/07/16 18:13:45 azarah Exp $
#
# Note that this file is for 2.6 kernels.
#
# Add the names of modules that you'd like to load when the system
# starts into this file, one per line.  Comments begin with # and
# are ignored.  Read man modules.autoload for additional details.

# For example:
# 3c59x
e100
#uhci-hcd
#usbhid
bluetooth
#l2cap
sco
rfcomm
bnep
hidp
#hci_usb


output from dmesg
Code:
Linux version 2.6.10-gentoo-r7-djnauk-b02 (root@jonathan) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #4 SMP Mon Feb 14 19:37:20 GMT 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.2 present.
ACPI: RSDP (v000 VIA694                                ) @ 0x000f7290
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000
Built 1 zonelists
Kernel command line: root=/dev/hda2 video=radeonfb:1280x1024@60 quiet
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Initializing CPU#0
CPU 0 irqstacks, hard=c0371000 soft=c0369000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1734.930 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515808k/524224k available (1715k kernel code, 7880k reserved, 536k data, 188k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3416.06 BogoMIPS (lpj=1708032)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps:  0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps:        0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 1e80)
CPU0: AMD Athlon(tm) XP 2100+ stepping 01
per-CPU timeslice cutoff: 731.70 usecs.
task migration cache decay timeout: 1 msecs.
SMP motherboard not detected.
Brought up 1 CPUs
CPU0:
 domain 0: span 01
  groups: 01
  domain 1: span 01
   groups: 01
NET: Registered protocol family 16
spurious 8259A interrupt: IRQ7.
PCI: PCI BIOS revision 2.10 entry at 0xfb640, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Initializing Cryptographic API
inotify device minor=63
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xe8000000
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.11.0 20020828 on minor 0:
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=183.00 Mhz, System=183.00 MHz
radeonfb: PLL min 12000 max 35000
radeonfb: No connector info table detected
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
Console: switching to colour frame buffer device 160x64
radeonfb: ATI Radeon QD  DDR SGRAM 64 MB
vesafb: ATI Technologies Inc., RG6 , 01.00 (OEM: ATI RAGE128)
vesafb: VBE version: 2.0
vesafb: protected mode interface info at c000:483c
vesafb: pmi: set display start = c00c48d0, set palette = c00c491c
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: redraw
vesafb: cannot reserve video memory at 0xe0000000
vesafb: framebuffer at 0xe0000000, mapped to 0xe1900000, using 2560k, total 65536k
fb1: VESA VGA frame buffer device
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
io scheduler noop registered
io scheduler cfq registered
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xb400-0xb407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xb408-0xb40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6B200P0, ATA DISK drive
hdb: TDK CDRW241040B, ATAPI CD/DVD-ROM drive
elevator: using cfq as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6Y080P0, ATA DISK drive
hdd: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 1024KiB
hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: max request size: 128KiB
hdc: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hdc: cache flushes supported
 hdc: hdc1 hdc2 hdc3
hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 USB0 USB1
ACPI: (supports S0 S1 S4 S5)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 188k freed
Adding 1204864k swap on /dev/hdc3.  Priority:-1 extents:1
EXT3 FS on hda2, internal journal
e100: Intel(R) PRO/100 Network Driver, 3.2.3-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 10 (level, low) -> IRQ 10
e100: eth0: e100_probe: addr 0xef020000, irq 10, MAC addr 00:02:B3:87:89:03
[b]Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.4
Bluetooth: SCO socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.1-mh1[/b]
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdc2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[b]usbcore: registered new driver hub[/b]
EXT3 FS on hda2, internal journal
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
[b]Bluetooth: HCI USB driver ver 2.8
usbcore: registered new driver hci_usb
USB Universal Host Controller Interface driver v2.2[/b]
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 10, io base 0xac00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
PCI: setting IRQ 12 as level-triggered
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 12 (level, low) -> IRQ 12
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 12, io base 0xb000
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:11.2: UHCI Host Controller
uhci_hcd 0000:00:11.2: irq 10, io base 0xb800
uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:11.3: UHCI Host Controller
uhci_hcd 0000:00:11.3: irq 10, io base 0xbc00
uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 4-1: new full speed USB device using uhci_hcd and address 2
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
usb 4-2: new full speed USB device using uhci_hcd and address 3
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 2 ports detected
drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0
drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1104
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 4-2.1: new low speed USB device using uhci_hcd and address 4
usbcore: registered new driver hiddev
[b]input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:11.3-2.1
input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:11.3-2.1
usbcore: registered new driver usbhid[/b]
drivers/usb/input/hid-core.c: v2.0:USB HID core driver


output from /var/log/everything/current
Code:
Feb 16 15:28:23 [kernel] Linux version 2.6.10-gentoo-r7-djnauk-b02 (root@jonathan) (gcc version 3.3.5 (Gentoo Linux 3.3.5-r1, ssp-3.3.2-3, pie-8.7.7.1)) #4 SMP Mon Feb 14 19:37:20 GMT 2005
Feb 16 15:28:24 [kernel] ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
[b]Feb 16 15:28:26 [hcid] Bluetooth HCI daemon
Feb 16 15:28:26 [sdpd] Bluetooth SDP daemon_
Feb 16 15:28:26 [hidd] Bluetooth HID daemon
Feb 16 15:28:26 [dund] Bluetooth DUN daemon version 2.12
Feb 16 15:28:26 [pand] Bluetooth PAN daemon version 2.12[/b]

  (cut)

[b]Feb 16 15:30:47 [kernel] Bluetooth: HCI USB driver ver 2.8[/b]
Feb 16 15:31:53 [kernel] USB Universal Host Controller Interface driver v2.2
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:10.0: irq 10, io base 0xac00
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Feb 16 15:31:53 [kernel] hub 1-0:1.0: USB hub found
Feb 16 15:31:53 [kernel] hub 1-0:1.0: 2 ports detected
Feb 16 15:31:53 [kernel] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
Feb 16 15:31:53 [kernel] PCI: setting IRQ 12 as level-triggered
Feb 16 15:31:53 [kernel] ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 12 (level, low) -> IRQ 12
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:10.1: UHCI Host Controller
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:10.1: irq 12, io base 0xb000
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Feb 16 15:31:53 [kernel] hub 2-0:1.0: USB hub found
Feb 16 15:31:53 [kernel] hub 2-0:1.0: 2 ports detected
Feb 16 15:31:53 [kernel] ACPI: PCI interrupt 0000:00:11.2[D] -> GSI 10 (level, low) -> IRQ 10
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:11.2: UHCI Host Controller
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:11.2: irq 10, io base 0xb800
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 3
Feb 16 15:31:53 [kernel] hub 3-0:1.0: USB hub found
Feb 16 15:31:53 [kernel] hub 3-0:1.0: 2 ports detected
Feb 16 15:31:53 [kernel] ACPI: PCI interrupt 0000:00:11.3[D] -> GSI 10 (level, low) -> IRQ 10
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:11.3: UHCI Host Controller
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:11.3: irq 10, io base 0xbc00
Feb 16 15:31:53 [kernel] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 4
Feb 16 15:31:53 [kernel] hub 4-0:1.0: USB hub found
Feb 16 15:31:53 [kernel] hub 4-0:1.0: 2 ports detected
Feb 16 15:31:54 [kernel] usb 3-2: new full speed USB device using uhci_hcd and address 2
Feb 16 15:31:54 [kernel] usb 4-1: new full speed USB device using uhci_hcd and address 2
Feb 16 15:31:54 [kernel] hub 4-1:1.0: USB hub found
Feb 16 15:31:54 [kernel] hub 4-1:1.0: 4 ports detected
Feb 16 15:31:55 [kernel] usb 4-2: new full speed USB device using uhci_hcd and address 3
Feb 16 15:31:55 [kernel] hub 4-2:1.0: USB hub found
Feb 16 15:31:55 [kernel] hub 4-2:1.0: 2 ports detected
Feb 16 15:31:55 [kernel] drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0
Feb 16 15:31:55 [kernel] drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1104
Feb 16 15:31:55 [kernel] usb 4-2.1: new low speed USB device using uhci_hcd and address 4
Feb 16 15:31:56 [hal.hotplug] DEVPATH is not set
Feb 16 15:31:56 [kernel] usbcore: registered new driver hiddev
[b]Feb 16 15:31:56 [kernel] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:11.3-2.1[/b]
Feb 16 15:31:56 [hal.hotplug] DEVPATH is not set
[b]Feb 16 15:31:56 [kernel] input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:11.3-2.1[/b]


Someone please tell me how to sort it out?? I'm stuck.
_________________
Jonathan Wright (Technical Director, JAB Web Solutions)

UK Hosting & Reseller Hosting from JAB Web Solutions
Back to top
View user's profile Send private message
djnauk
Apprentice
Apprentice


Joined: 11 Feb 2003
Posts: 183
Location: Caerphilly, Wales, UK

PostPosted: Wed Feb 16, 2005 8:23 pm    Post subject: Reply with quote

OK. I've fixed it now! :)

I added all the bluetooth and usb stuff directly into the kernel (not as modules, but i think the bit that did it was added usbfs to the kernel - i'd never used it, so never installed it). Seams that usbfs may be a requirement to using hid/hci?

I'll post my .config up for anyone if they want it?
_________________
Jonathan Wright (Technical Director, JAB Web Solutions)

UK Hosting & Reseller Hosting from JAB Web Solutions
Back to top
View user's profile Send private message
djnauk
Apprentice
Apprentice


Joined: 11 Feb 2003
Posts: 183
Location: Caerphilly, Wales, UK

PostPosted: Fri Mar 11, 2005 10:36 am    Post subject: Reply with quote

I was a bit premature on that last reply! :)

It seams that the devices won't come out of boot-protocl mode once they've gone into HCI. I've recently upgraded the kernel (now 2.6.11-gentoo) and patched with the patch-2.6.11-mh1.gz patch from bluez.org. Kernel compiles and runs fine, and I can type away to my hearts contents.

Bluethooth is working fine. I can get my phones to talk back and fore to the system without a problem. I just can't use the extra buttons (or the scrollwheel) on the mouse, and any of the side 'extra' buttons don't work and the F-Lock key doesn't work. If the keyboard doesn't have it lit when it's booting, you can't use any of the Fx keys! :(

Anyone have any idea on how to tell the system to setup the keyboard so it's not in boot-protocol any more?
_________________
Jonathan Wright (Technical Director, JAB Web Solutions)

UK Hosting & Reseller Hosting from JAB Web Solutions
Back to top
View user's profile Send private message
Treo
Tux's lil' helper
Tux's lil' helper


Joined: 30 Sep 2003
Posts: 88
Location: Newark, DE

PostPosted: Fri Mar 18, 2005 4:18 am    Post subject: Reply with quote

Hi,

I just got my diNovo and everything is working really nice, bluetooth mode is on, kernel is all set, I can talk to my PDA phone, my keyboard works with the PDA phone (which is awesome by the way)... the mouse had some problems, the settings you have with ZAxis being 7 and 8 didn´t work, 4 5 work though. The only major problem I am having is with the keyboard, the special keys are not recognized at all, neither on the keyboard nor on the media pad. xev shows no event whatsoever. I´ve tried around with kernel options, no change. The strange thing is though that it works fine in USB mode, just like my old Logitech iTouch. I did all the mods to the xorg files, but that didn´t help. I use kde so I set it there, nothing either. I´ve even tried lineakd, didn´t work either... well, I kinda though so after xev wouldn´t show anything. I don´t know what to try from here... anyone else with this problem? Any solutions? Idea?

Thanks, Treo
Back to top
View user's profile Send private message
djnauk
Apprentice
Apprentice


Joined: 11 Feb 2003
Posts: 183
Location: Caerphilly, Wales, UK

PostPosted: Fri Mar 18, 2005 6:35 am    Post subject: Reply with quote

I think you've got the same problem as me. When you run hidd (no options) on the command line, do you get three entires saying 'Boot Protocol'? I can't show you mine atm, as I'm running in HID mode, not HCI.
_________________
Jonathan Wright (Technical Director, JAB Web Solutions)

UK Hosting & Reseller Hosting from JAB Web Solutions
Back to top
View user's profile Send private message
Treo
Tux's lil' helper
Tux's lil' helper


Joined: 30 Sep 2003
Posts: 88
Location: Newark, DE

PostPosted: Fri Mar 18, 2005 2:53 pm    Post subject: Reply with quote

Hi,

jap... got the same exact problem...

Quote:

00:07:61:1D:3E:C3 HID Boot Device [046d:b001] connected [boot-protocol]
00:07:61:1C:EA:04 HID Boot Device [046d:b303] connected [boot-protocol]
00:07:61:1E:04:CE HID Boot Device [046d:b3e1] connected [boot-protocol]


The question is how to change that... at least manually for now... I tried 2.6.10-r6 and now 2.6.11-r4, neither one works properly...
I´ve searched google but I didn´t find anything useful... any ideas?

Treo
Back to top
View user's profile Send private message
djnauk
Apprentice
Apprentice


Joined: 11 Feb 2003
Posts: 183
Location: Caerphilly, Wales, UK

PostPosted: Fri Mar 18, 2005 3:05 pm    Post subject: Reply with quote

It's something that's been bugging me for a while as well. I've tried during and after booting switching it over - no effect. It's just ironic that in bluetooth mode it'll work great with everything except that which is came and was designed to work with! :?
_________________
Jonathan Wright (Technical Director, JAB Web Solutions)

UK Hosting & Reseller Hosting from JAB Web Solutions
Back to top
View user's profile Send private message
Treo
Tux's lil' helper
Tux's lil' helper


Joined: 30 Sep 2003
Posts: 88
Location: Newark, DE

PostPosted: Fri Mar 18, 2005 3:30 pm    Post subject: Reply with quote

Well, in the hopes of thinking it might be the logitech proprietary transmitter, I tried my Anycom 240 (pretty much the best USB Bluetooth dongle you can buy), same outcome... I upgraded everything to 2.15 from 2.10... nothing... I come to think that this might be a kernel issue... what kernel are you using? I run gentoo-dev-sources-2.6.11-r4 without the extra -mh patch from bluez.org... seems to be already in it anyways...
I´ll see if I can submit something to them directly... hopefully they can fix it...

Treo
Back to top
View user's profile Send private message
djnauk
Apprentice
Apprentice


Joined: 11 Feb 2003
Posts: 183
Location: Caerphilly, Wales, UK

PostPosted: Fri Mar 18, 2005 3:34 pm    Post subject: Reply with quote

I'm currently using the 2.6.11-gentoo kernel, although I have tried the 2.6.10-gentoo-r{7,8} version before that, all with the mh patch applied (versions 1 and 4 respectivley). I've look around on the web myself, but can't seam to find anything about boot-protocol toubles in hci mode.
_________________
Jonathan Wright (Technical Director, JAB Web Solutions)

UK Hosting & Reseller Hosting from JAB Web Solutions
Back to top
View user's profile Send private message
Treo
Tux's lil' helper
Tux's lil' helper


Joined: 30 Sep 2003
Posts: 88
Location: Newark, DE

PostPosted: Fri Mar 18, 2005 3:55 pm    Post subject: Reply with quote

I just posted to their mailinglist... hopefully someone their knows something... the only step up from that would be the developers ML... but I´ll only go there once everything else fails.

Treo
Back to top
View user's profile Send private message
Treo
Tux's lil' helper
Tux's lil' helper


Joined: 30 Sep 2003
Posts: 88
Location: Newark, DE

PostPosted: Fri Mar 18, 2005 5:14 pm    Post subject: Reply with quote

Hi,

I got a solution, directly from the developer. Apparently, mode discovery was disabled in the previous patches, now -mh2 is available on www.bluez.org, released just a couple of minutes ago. Download it, apply it, recompile the kernel and enjoy... you might have to reconnect the devices, but once that´s done, you are good.
There is still an issue with the ¨F-Lock¨ key and my ¨´¨... the first doesn´t work at all, for the second to appear I have to hit the key twice... and it isn´t the regular apostrophe either. But that might be more of a mapping issue...

Treo
Back to top
View user's profile Send private message
djnauk
Apprentice
Apprentice


Joined: 11 Feb 2003
Posts: 183
Location: Caerphilly, Wales, UK

PostPosted: Fri Mar 18, 2005 9:20 pm    Post subject: Reply with quote

Treo wrote:
I got a solution, directly from the developer. Apparently, mode discovery was disabled in the previous patches, now -mh2 is available on www.bluez.org, released just a couple of minutes ago. Download it, apply it, recompile the kernel and enjoy... you might have to reconnect the devices, but once that´s done, you are good.
There is still an issue with the ¨F-Lock¨ key and my ¨´¨... the first doesn´t work at all, for the second to appear I have to hit the key twice... and it isn´t the regular apostrophe either. But that might be more of a mapping issue...


Brilliant! :D It's working like a charm. I can now send/recieve files to and from my phones all the while controlling the volumne via my keyboard. Not much to ask for really? :D

I don't have the ¨´¨ key, so I can't backup ur problem (My model is a UK layout), but the `, ' and " keys all work fine :) Also, F-Lock doesn't switch, but that's only a minor issue. I don't use their 'extra' buttons, so as long as the F-Lock is on, there's no problem :)

For reference, the responce from hidd now says:

Code:
jwright@jonathan jwright $ sudo hidd
00:07:61:22:6x:xx Logitech Bluetooth Mediapad [046d:b3e1] connected
00:07:61:22:4y:yy Logitech Bluetooth Keyboard [046d:b303] connected
00:07:61:22:5z:zz Logitech Bluetooth Mouse [046d:b001] connected


Although one down site - gnome-phone-manage refuses to connect to my phone now! :-/ Well, they said you can't have everything.
_________________
Jonathan Wright (Technical Director, JAB Web Solutions)

UK Hosting & Reseller Hosting from JAB Web Solutions
Back to top
View user's profile Send private message
Treo
Tux's lil' helper
Tux's lil' helper


Joined: 30 Sep 2003
Posts: 88
Location: Newark, DE

PostPosted: Fri Mar 18, 2005 9:21 pm    Post subject: Reply with quote

Ok, worked out the F-lock issue... as well as the apostrophe... that was a problem with the keymap... the F-lock is working, but the Hub LED doesn't update... oh well, I can live with that.
Everything else works GREAT... I have all the media keys assigned, this is really awesome. If only A2DP would work... but that will take some more time...
I submitted a request through bugzilla to incorporate the new patch into the next dev kernel.

Hell, this is one great day for me... besides getting all this working, I won a Dean's Scholarship which will almost fully cover my college cost for the next 5 years... I hope I am not just dreaming this :)

The only thing that I have to get working now is the LCD... but I doubt that this is even supported yet.

Treo
Back to top
View user's profile Send private message
sibov
Tux's lil' helper
Tux's lil' helper


Joined: 09 Feb 2004
Posts: 147
Location: Germany

PostPosted: Tue Mar 29, 2005 11:03 pm    Post subject: Re: [HOWTO] Logitech DiNovo Reply with quote

Hi Neskweek,

I think there is a typo in your HowTo in 3. Xorg Configuration ....

...
KDE:

/etx/X11/xorg.conf:
Quote:

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "logicdmd"
Option "XkbLayout" "lg" //language keyboard layout
EndSection
.....


I think it should be
Option "XkbModel" "logidmd"
instead of "logicdmd" or shouldn't it????

:wink:

Never the less, i cannot get my special keys working in xorg 6.8, xev doesn't recognize the special keyboard keys.
showkey on console, also do not deliver any hint of the additonal buttons.

Thanks in advance for some tips.

PS: Great HowTo! stay tuned!
_________________
Gentoo 2.6.17-gentoo-r5 with dmraid Raid0 Dualboot
AMD64 X2 3800+, 4x512MB DDR PC3200Pro Corsair Geforce EN6600GT silencer @ 256MB
4x250GB SATAII Samsung SP120, Asus A8N Premium, Plextor PX712SA DVDRW
Logitech Dinovo, SB Audigy4
Back to top
View user's profile Send private message
djnauk
Apprentice
Apprentice


Joined: 11 Feb 2003
Posts: 183
Location: Caerphilly, Wales, UK

PostPosted: Wed Mar 30, 2005 9:55 am    Post subject: Re: [HOWTO] Logitech DiNovo Reply with quote

sibov wrote:
Never the less, i cannot get my special keys working in xorg 6.8, xev doesn't recognize the special keyboard keys.
showkey on console, also do not deliver any hint of the additonal buttons.


Yeah, a few of us had similiar problems for a while. The latest kernel patch from www.bluez.org fixed this, however, what kernel are you running and what's the output from hidd?
_________________
Jonathan Wright (Technical Director, JAB Web Solutions)

UK Hosting & Reseller Hosting from JAB Web Solutions
Back to top
View user's profile Send private message
sibov
Tux's lil' helper
Tux's lil' helper


Joined: 09 Feb 2004
Posts: 147
Location: Germany

PostPosted: Wed Mar 30, 2005 12:16 pm    Post subject: Reply with quote

Hi djnauk,

i am running on 2.6.11-nitro2, but the bluetooth stuff is working fine in hidd2hci mode.

kdebluetooth is working.

At the moment i cannot post my hidd output, because i am in the office. I will post it asap when
i am back on my home pc. (Maybe i find time 2 wake the box up - wakeonlan rulez ;-)

Thanx for your response. :D
_________________
Gentoo 2.6.17-gentoo-r5 with dmraid Raid0 Dualboot
AMD64 X2 3800+, 4x512MB DDR PC3200Pro Corsair Geforce EN6600GT silencer @ 256MB
4x250GB SATAII Samsung SP120, Asus A8N Premium, Plextor PX712SA DVDRW
Logitech Dinovo, SB Audigy4
Back to top
View user's profile Send private message
djnauk
Apprentice
Apprentice


Joined: 11 Feb 2003
Posts: 183
Location: Caerphilly, Wales, UK

PostPosted: Wed Mar 30, 2005 2:23 pm    Post subject: Reply with quote

sibov wrote:
Hi djnauk,

i am running on 2.6.11-nitro2, but the bluetooth stuff is working fine in hidd2hci mode.


Yeah, the problems we were having is that the bluetooth modules weren't running mode discovery on the items, and therefore the keyboard was only running in boot mode. Running hidd will tell you how the keyboard/mouse/mediapad are running. If they all say boot mode, then you will need to get the latest patch (at least 2.6.11-mh2) from www.bluez.org and patch it against the kernel: cd /usr/src/linux && patch -p1 -i patch_file.
_________________
Jonathan Wright (Technical Director, JAB Web Solutions)

UK Hosting & Reseller Hosting from JAB Web Solutions
Back to top
View user's profile Send private message
sibov
Tux's lil' helper
Tux's lil' helper


Joined: 09 Feb 2004
Posts: 147
Location: Germany

PostPosted: Wed Mar 30, 2005 5:34 pm    Post subject: Reply with quote

djnauk wrote:
sibov wrote:
Hi djnauk,

i am running on 2.6.11-nitro2, but the bluetooth stuff is working fine in hidd2hci mode.


Yeah, the problems we were having is that the bluetooth modules weren't running mode discovery on the items, and therefore the keyboard was only running in boot mode. Running hidd will tell you how the keyboard/mouse/mediapad are running. If they all say boot mode, then you will need to get the latest patch (at least 2.6.11-mh2) from www.bluez.org and patch it against the kernel: cd /usr/src/linux && patch -p1 -i patch_file.


u are right,

hidd --show
00:07:61:19:6B:27 HID Boot Device [046d:b001] connected [boot-protocol]
00:07:61:18:7C:0C HID Boot Device [046d:b303] connected [boot-protocol]

i ll try to patch my current kernel with the latest bluez patch set

thanx
_________________
Gentoo 2.6.17-gentoo-r5 with dmraid Raid0 Dualboot
AMD64 X2 3800+, 4x512MB DDR PC3200Pro Corsair Geforce EN6600GT silencer @ 256MB
4x250GB SATAII Samsung SP120, Asus A8N Premium, Plextor PX712SA DVDRW
Logitech Dinovo, SB Audigy4
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
Page 2 of 8

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum