Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
HOWTO: Open-Xchange on Gentoo
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 20, 21, 22 ... 37, 38, 39  Next  
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
Dijital_US
n00b
n00b


Joined: 24 Feb 2005
Posts: 2

PostPosted: Tue Mar 15, 2005 12:44 am    Post subject: Reply with quote

bitwh0re wrote:
Ok, the newest version of the howto is about to come out, but I figured it'd help anyone here battling with an OX0.8PR-Beta install. Realize that this isn't guaranteed to get every little aspect of OX running, but it will get the core going for you. Again, it's not "published" yet, but here.. have a peek:

http://www.mikefetherston.ca/OX/html/index-new.html

Let me know what you think with any comments, suggestions, fixes, etc etc...

Mike.

I think this is only my 2nd post but I for one greatly appreciate the new guide, and must say that it looks great especially for those that are 100% noobs like me, where I basically need someone to hold my hand while I do it for now so to speak, keep up the great work:D
Also, could possibly put up a pdf version of the newest guide?
Back to top
View user's profile Send private message
bitwh0re
Apprentice
Apprentice


Joined: 29 Apr 2004
Posts: 214

PostPosted: Tue Mar 15, 2005 2:31 am    Post subject: Reply with quote

Dijital_US wrote:
bitwh0re wrote:
Ok, the newest version of the howto is about to come out, but I figured it'd help anyone here battling with an OX0.8PR-Beta install. Realize that this isn't guaranteed to get every little aspect of OX running, but it will get the core going for you. Again, it's not "published" yet, but here.. have a peek:

http://www.mikefetherston.ca/OX/html/index-new.html

Let me know what you think with any comments, suggestions, fixes, etc etc...

Mike.

I think this is only my 2nd post but I for one greatly appreciate the new guide, and must say that it looks great especially for those that are 100% noobs like me, where I basically need someone to hold my hand while I do it for now so to speak, keep up the great work:D
Also, could possibly put up a pdf version of the newest guide?


no. :)

Thanks for putting us over 500 posts!$#! You deserve some kind of reward. :) Maybe a PDF export of the HTML would do? :)

http://www.mikefetherston.ca/OX/OX-HOWTO-0.21b.pdf
Back to top
View user's profile Send private message
r4d0
n00b
n00b


Joined: 11 Mar 2005
Posts: 3

PostPosted: Tue Mar 15, 2005 10:45 am    Post subject: Re: some 0.8.0 beta3 Reply with quote

amigafan wrote:

...
I found out that there is a mod_jk in portage. Has anyone tried it yet?
...


Yes. And it works very well.
I use :
net-www/apache-2.0.52-r1
www-apache/mod_jk2-2.0.4
www-servers/tomcat-5.0.27-r4
Back to top
View user's profile Send private message
zcappc8
n00b
n00b


Joined: 12 Mar 2005
Posts: 13

PostPosted: Tue Mar 15, 2005 4:29 pm    Post subject: Error on webdav.contacts Reply with quote

Hello All

I'm slowly getting OX to work (I'm going through it in a rather blind fashion though!). I seem to be getting the following error when I connect to http://myserver/servlet/webdav.contacts

Code:

type Status report

message HTTP method GET is not supported by this URL

description The specified HTTP method is not allowed for the requested resource (HTTP method GET is not supported by this URL).


If I connect to http://myserver/servlet/webdev.ical then all works fine.

My ultimate aim is to sync kaddressbook with OX - any one done this?

Cheers
Back to top
View user's profile Send private message
amigafan
Tux's lil' helper
Tux's lil' helper


Joined: 10 Jul 2003
Posts: 134
Location: Ahrensburg, Germany

PostPosted: Tue Mar 15, 2005 10:18 pm    Post subject: Reply with quote

want a killer tip for a working webdav.documents?

in workers2.properties put something like
Code:
[uri:/servlet/webdav.documents/*]
worker=ajp13:domain.tld:8009


and NOT
Code:
[uri:/servlet/webdav.documents*]
worker=ajp13:domain.tld:8009


Please notice the slash. You have to set this for all entries. Works nice with oxlook, this time even writeable ;)
Back to top
View user's profile Send private message
amigafan
Tux's lil' helper
Tux's lil' helper


Joined: 10 Jul 2003
Posts: 134
Location: Ahrensburg, Germany

PostPosted: Wed Mar 16, 2005 8:32 am    Post subject: Reply with quote

I read through the new howto by Mike and found a little mistake there. The steps in "Configure Apache for Tomcat" should be a bit different. Instead of
Code:
 mv /usr/lib/apache2-extramodules/mod_jk2.so \ /usr/lib/apache2/modules
you can simply edit /etc/conf.d/apache and add
Code:
-D JK2
(must be UPPERCASE!) to it. The module will be loaded with /etc/apache2/conf/modules.d/89_mod_jk2.conf then. In this file you can set
Code:
JkSet config.file /etc/apache2/conf/workers2.properties
.

Another thing to mention is that webdav shouldn't be treated as an optional component. With newer versions of ox the web.xml file is created automatically, so the only thing you need is a valid workers2.properties file. Mike, please add a complete workers2.properties file to the above section - so it can be removed from the "extending section" ;) As you can see in my post above, there is a typo in the howto that made me crazy: in the workers2 example for webdav the slashes are missing. I realized a readable webdav support without them but writing and the outlook connector didn't work. They work fine by adding them. Here is my working workers2.properties file
Code:
[logger]
info=Native logger
level=ERROR

[shm]
info=Scoreboard. Requried for reconfiguration and status with multiprocess servers.
file=anon

# Defines a load balancer named lb. Use even if you only have one machine.
[lb:lb]

# Example socket channel, override port and host.
[channel.socket:domain.tld:8009]
port=8009
host=domain.tld

# define the worker
[ajp13:domain.tld:8009]
channel=channel.socket:domain.tld:8009
group=lb

# Map the Tomcat examples webapp to the Web server uri space
[uri:/examples/*]
group=lb

[status:]
info=Status worker, displays runtime information

[uri:/jkstatus/*]
info=The Tomcat /jkstatus handler
group=status:

[uri:/servlet/*]
worker=ajp13:domain.tld:8009

[uri:/umin/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.contacts/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.calendar/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.ical/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.documents/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.tasks/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.folders/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.projects/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.groupuser/*]
worker=ajp13:domain.tld:8009


[uri:/servlet/webdav.attachments/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.freebusy/*]
worker=ajp13:domain.tld:8009

[uri:/servlet/webdav.vcard/*]
worker=ajp13:domain.tld:8009


Simply replace domain.tld with your valid domain.

Another tip for the guide can be a small note for /etc/openldap/ldap.conf . After a fresh installation there is a space after the comma in the BASE line. This is a showstopper and has to be removed.

I have to say that our gentoo howto is - compared to the howtos of other distris - one of the best out there! Nice work.


Last edited by amigafan on Wed Mar 16, 2005 4:53 pm; edited 1 time in total
Back to top
View user's profile Send private message
Cuchulainn
Tux's lil' helper
Tux's lil' helper


Joined: 10 Apr 2003
Posts: 107

PostPosted: Wed Mar 16, 2005 8:55 am    Post subject: Reply with quote

I've got a problem initializing the LDAP tree. I get the following error:
Quote:
DB_KEYEXIST: Key/data pair already exists (-30997)

Any idea how to fix this?

Cheers, Cuchu
Back to top
View user's profile Send private message
bitwh0re
Apprentice
Apprentice


Joined: 29 Apr 2004
Posts: 214

PostPosted: Wed Mar 16, 2005 1:30 pm    Post subject: Reply with quote

Cuchulainn wrote:
I've got a problem initializing the LDAP tree. I get the following error:
Quote:
DB_KEYEXIST: Key/data pair already exists (-30997)

Any idea how to fix this?

Cheers, Cuchu


What I've found works is by shutting down the ldap server and deleting the /var/lib/openldap-data directory and re-emerging openldap. :(
Back to top
View user's profile Send private message
bitwh0re
Apprentice
Apprentice


Joined: 29 Apr 2004
Posts: 214

PostPosted: Wed Mar 16, 2005 1:31 pm    Post subject: Reply with quote

amigafan, thanks catching those omissions/errors and submitting your corrections! I'll add that to the HOWTO as soon as I can.

Mike.
Back to top
View user's profile Send private message
carpman
Advocate
Advocate


Joined: 20 Jun 2002
Posts: 2202
Location: London - UK

PostPosted: Wed Mar 16, 2005 2:40 pm    Post subject: Reply with quote

Thought i would just post this here as it may help those doing install, follow guide until you get to install apps section.


First off because of download restrictions you will need to download to the /usr/portage/distfiles

Code:

sun-jdk
jaf-1_0_2-upd
javamail-1_3_1-upd


you can get these from sun web pages.

To speed things and save typing cut and paste following into console.

Code:

emerge --nodeps sun-jdk &&  env-update && source /etc/profile && emerge  sun-jaf-bin sun-javamail-bin perl openssl xerces jikes tomcat ispell app-admin/sudo dev-java/ant jdom postgresql openldap cyrus-sasl cyrus-imapd cyrus-imap-admin postfix apache


Code:

emerge  Net-SSLeay IO-Socket-SSL XML-NamespaceSupport  XML-SAX-Base Authen-SASL Convert-ASN1 perl-ldap



You can add -p if you wish to check before compiling.


Not a lot of help but may save bit of time.
_________________
Work Station - 64bit
Gigabyte GA X48-DQ6 Core2duo E8400
8GB GSkill DDR2-1066
SATA Areca 1210 Raid
BFG OC2 8800 GTS 640mb
--------------------------------
Notebook
Samsung Q45 7100 4gb
Back to top
View user's profile Send private message
amigafan
Tux's lil' helper
Tux's lil' helper


Joined: 10 Jul 2003
Posts: 134
Location: Ahrensburg, Germany

PostPosted: Wed Mar 16, 2005 4:22 pm    Post subject: Reply with quote

bitwh0re wrote:
Cuchulainn wrote:
I've got a problem initializing the LDAP tree. I get the following error:
Quote:
DB_KEYEXIST: Key/data pair already exists (-30997)

Any idea how to fix this?

Cheers, Cuchu


What I've found works is by shutting down the ldap server and deleting the /var/lib/openldap-data directory and re-emerging openldap. :(


A maybe faster way is to simply delete the content of the directory:
Code:
rm /var/lib/openldap-data/*
and to restart slapd. Then you can re-initialize your ldap-tree without reemerging openldap.
Back to top
View user's profile Send private message
bitwh0re
Apprentice
Apprentice


Joined: 29 Apr 2004
Posts: 214

PostPosted: Wed Mar 16, 2005 4:49 pm    Post subject: Reply with quote

amigafan wrote:
bitwh0re wrote:
Cuchulainn wrote:
I've got a problem initializing the LDAP tree. I get the following error:
Quote:
DB_KEYEXIST: Key/data pair already exists (-30997)

Any idea how to fix this?

Cheers, Cuchu


What I've found works is by shutting down the ldap server and deleting the /var/lib/openldap-data directory and re-emerging openldap. :(


A maybe faster way is to simply delete the content of the directory:
Code:
rm /var/lib/openldap-data/*
and to restart slapd. Then you can re-initialize your ldap-tree without reemerging openldap.


amigafan, thanks.. as you can probably tell, I'm no expert in the area that is LDAP. :) I'll add this tip to the HOWTO as well.
Back to top
View user's profile Send private message
Cuchulainn
Tux's lil' helper
Tux's lil' helper


Joined: 10 Apr 2003
Posts: 107

PostPosted: Wed Mar 16, 2005 4:54 pm    Post subject: Reply with quote

:D Thanks for that tip. Seems like I will need it.... I get the following error now:
Quote:
slapadd: dn="smtpDomain=dummy.net,ou=MailTransports,ou=SMTPObjects,ou=AdminObjects,ou=OxObjects,dc=dummy,dc=net"(line=163) (64) value of naming attribute 'smtpDomain' is not present in entry

Any ideas on this one?
Back to top
View user's profile Send private message
bitwh0re
Apprentice
Apprentice


Joined: 29 Apr 2004
Posts: 214

PostPosted: Wed Mar 16, 2005 5:01 pm    Post subject: Reply with quote

Cuchulainn wrote:
:D Thanks for that tip. Seems like I will need it.... I get the following error now:
Quote:
slapadd: dn="smtpDomain=dummy.net,ou=MailTransports,ou=SMTPObjects,ou=AdminObjects,ou=OxObjects,dc=dummy,dc=net"(line=163) (64) value of naming attribute 'smtpDomain' is not present in entry

Any ideas on this one?


When you ./configure'd OX did you use some of the new parameters? Namely,

--with-domain=ox-domain.tld
Back to top
View user's profile Send private message
Cuchulainn
Tux's lil' helper
Tux's lil' helper


Joined: 10 Apr 2003
Posts: 107

PostPosted: Wed Mar 16, 2005 5:08 pm    Post subject: Reply with quote

No, I didn't use the new paramaters..... Can I simply do a ./config again, or do I need to remove something first?

BTW, stopping the slapd service and removing the /var/lib/openldap-data dir is not enough... you need to do a mkdir /var/lib/openldap-data, and a chown ldap:ldap /var/lib/openldap-data before restarting the service. I thought i'd just mention it for future reference.
Back to top
View user's profile Send private message
bitwh0re
Apprentice
Apprentice


Joined: 29 Apr 2004
Posts: 214

PostPosted: Wed Mar 16, 2005 9:24 pm    Post subject: Reply with quote

Cuchulainn wrote:
No, I didn't use the new paramaters..... Can I simply do a ./config again, or do I need to remove something first?

BTW, stopping the slapd service and removing the /var/lib/openldap-data dir is not enough... you need to do a mkdir /var/lib/openldap-data, and a chown ldap:ldap /var/lib/openldap-data before restarting the service. I thought i'd just mention it for future reference.


Yes, it should be as simple as doing a ./configure && make && make install.

You can try using rm /var/lib/openldap-data/* instead which will keep the directory and hopefully the permissions. That should save you from having to recreate the directory and reset permissions back to ldap:ldap.
Back to top
View user's profile Send private message
Hibbelharry
Tux's lil' helper
Tux's lil' helper


Joined: 27 May 2003
Posts: 88
Location: Bremen, Northern Germany

PostPosted: Thu Mar 17, 2005 1:58 am    Post subject: traps, traps and more traps ? Reply with quote

hey guys,
i'm currently in progress of restoring and updating our OX-Server after a suddenly powerloss which crashed some filesystems badly. after 8 hours of beeing offline i thought it's a good time to do a update of OX to the current version. After having major headaches with 0.8-beta4 i reverted to beta3. beta4 somehow managed it to corrupt my pgsql databases, don't know how this happens. i noticed some things while updating OX which might be useful for others:

i'm successfully using openldap 2.2 manually unmasked in portage which supports aci from the start, acls from OX-Wiki for 2.2 work really flawless. but when i stopped slapd ant deleted the contents of /var/lib/openldap-data and reinserted the init_ldap.ldif file and my modified userdata some files in the openldap-data were curiously owned by root, which gave me strange errors. be sure to check this and reown the files if needed.

when i installed pgsql 8 i had to include a extra trusting relation for the ip address of my server. the dns name of my server was in there, but i got some permission denied errors for my own ip in the logs. just be sure to check this after inserting data when things don't work.

a note to bitwhore and init-zero:
your work here is absolutely great, i found lots of good help in the howtos on mike's page and here in the forum.
currently i'm just facing trouble with mod_jk2: whenever i tried to integrate it in the new ~x86 apache 2.0.53-whatever-version apache, it seg'faults on startup. i also tried building the module from source but that didn't help either. i don't know if this is related to my system or a general problem...
success storys from other users are welcome ;)
mod_jk2 is also dead upstream and unmaintained in gentoo and at apsf. maybe a solution with mod_jk should be used ?
i'm currently in progress of trying to get this running. if i'm successful i will post my results here. if anyone knows bottlenecks of this solution feel free to inform me. i'm somehow experienced with apache but a nearly absolute noob dealing with tomcat and jk connector. any help is appreciated.
another problem: webdav servlets work partially: i can acces documents and modify them, but ical is read only. every change gets lost. i found no errors in the logs so far. this is happening with both 0.8 beta3 and 4. anyone ever faced this ?
greetz from Bremen, Northern Germany

Wilken Haase
wilken.haase@campuspoint.de
Back to top
View user's profile Send private message
amigafan
Tux's lil' helper
Tux's lil' helper


Joined: 10 Jul 2003
Posts: 134
Location: Ahrensburg, Germany

PostPosted: Thu Mar 17, 2005 8:50 pm    Post subject: Reply with quote

Is it possible that the howto is wrong about "--with-xercesjar=" ? The official install guide states that a file called xml-apis should be used. This file is available under gentoo, so I think the line should read:
Code:
--with-xercesjar=/usr/share/xerces-2/lib/xml-apis.jar
I HAVE NOT tried this yet. Another thing is the creation of the database. We create it using UNICODE, the official guide uses UTF-8. Maybe both is something to test and to update the howto ;)
Back to top
View user's profile Send private message
Dark_Hunter
Apprentice
Apprentice


Joined: 28 Mar 2003
Posts: 230
Location: Germany

PostPosted: Fri Mar 18, 2005 11:26 am    Post subject: Reply with quote

bitwh0re wrote:

Let me know what you think with any comments, suggestions, fixes, etc etc...

greate tutorial =) just doing it step by step.
I've found a somehow problem and don't know if it is realy important "java-config" is no dependency of sun-jdk but is executed during emerge. I think it would be good to emerge it before the sun-jdk.
Back to top
View user's profile Send private message
temp
n00b
n00b


Joined: 03 Aug 2002
Posts: 11

PostPosted: Fri Mar 18, 2005 11:30 am    Post subject: Reply with quote

I love this turorial - works like a charm ;-)

But found a bug:

in the section where you describe /etc/apache2/conf/workers2.properties on the last line it states "freebusy" again, should be vcard...

Bye, and thanks for this great stuff!

Stephan
Back to top
View user's profile Send private message
hybrid256
n00b
n00b


Joined: 18 Mar 2005
Posts: 22

PostPosted: Fri Mar 18, 2005 1:04 pm    Post subject: Willing to move beyond ... Reply with quote

Hi all,

It's for a few days now that I'm in the configuration of my Open Xchange server on Gentoo thanks to this great Howto everyones there helped to build.
I'm not quite finished by now but the system works and is usable even if there are still some points I have to clarify.

I was very impressed by all this good will and I love Open Xchange, this is great stuff and this will definitely bury those damned Exchange Server 5.5 I have there which are giving me more and more headaches every days (I'm not even talking about the price I'll have to put on the table to replace them by Exchange 2003 ...)

You guys (and the whole Gentoo and Open Xchange teams) are giving me such a fresh air ... so much power for so few money ... I must be dreaming :D

Well, for all those reasons, I also want to be of some help and I thought these two days that it would be great to have a central repository for all the tips and help that have been said here and there.
The Howto is wonderfull but it can be greatly enhanced and I especially thinks that "making it work" is not enough, I would love to have a "guide for building Open Xchange", something that would take people from the beginning including the best options to build the Gentoo system for taht purpose : building an enterprise class Open Xchange server.

This guide would include the basics of course but also configuration for security, enhancements (antispam, antivirus, etc etc ...), optimizations, etc etc ...

For that purpose, I propose to create a "Howto generator" based on the howto created by bitwhore and all the other helpers there.
The idea is to "generate" the howto based on the configuration you want.
For that purpose, you'll have to fill a form on the website, answering few questions (domain name, hostname, multi site support, anti spam, anti virus, hardware configuration, ...) and after this "Wizard", the site would generate the Howto for building a complete rock-solid Open Xchange server based on Gentoo from scratch.

Here is the idea, I hope that it would interrest some of you there, that doesn't mean this thread or the current howto to become obsolete, on the contrary, in fact, every idea gathered here and even elsewhere would simply be integrated in the "Howto generator".

I'm planning to work on it anyway, I'll be building the "generator", making translation for French users too and begin with what has already be done for the actual howto.

I sincerely hope some of you would be interrested in helping me for that purpose, if not, well, I'll try to do my best anyway :roll:

See ya'
Back to top
View user's profile Send private message
pgb
n00b
n00b


Joined: 03 Feb 2005
Posts: 27

PostPosted: Fri Mar 18, 2005 1:19 pm    Post subject: Reply with quote

In a related topic to how useful this howto is...
I've seen that in bugs.gentoo.org there is an ebuild for Open-xchange. What are the chances that this ebuild will be integrated into portage? That would make installing Open-xchange as easy as installing any other gentoo ebuild...
I think people on this thread may be able to contribute to that ebuild...
What do you think?
Back to top
View user's profile Send private message
Dark_Hunter
Apprentice
Apprentice


Joined: 28 Mar 2003
Posts: 230
Location: Germany

PostPosted: Fri Mar 18, 2005 3:45 pm    Post subject: Reply with quote

Found a new bug in "/etc/conf.d/saslauthd"

the
Code:
SASLAUTH_MECH=ldap
should be
Code:
SASLAUTH_MECH="ldap"
Back to top
View user's profile Send private message
bitwh0re
Apprentice
Apprentice


Joined: 29 Apr 2004
Posts: 214

PostPosted: Fri Mar 18, 2005 7:47 pm    Post subject: Re: Willing to move beyond ... Reply with quote

hybrid256 wrote:

Well, for all those reasons, I also want to be of some help and I thought these two days that it would be great to have a central repository for all the tips and help that have been said here and there.
The Howto is wonderfull but it can be greatly enhanced and I especially thinks that "making it work" is not enough, I would love to have a "guide for building Open Xchange", something that would take people from the beginning including the best options to build the Gentoo system for taht purpose : building an enterprise class Open Xchange server.

This guide would include the basics of course but also configuration for security, enhancements (antispam, antivirus, etc etc ...), optimizations, etc etc ...


That sounds like a book. Of course, that's crossed my mind. I know that this HOWTO can be so much more than "just the basics". Funny, the "just the basics" in this HOWTO seems to be so much more than any of the other guides! :) </bragging>


hybrid256 wrote:

For that purpose, I propose to create a "Howto generator" based on the howto created by bitwhore and all the other helpers there.
The idea is to "generate" the howto based on the configuration you want.
For that purpose, you'll have to fill a form on the website, answering few questions (domain name, hostname, multi site support, anti spam, anti virus, hardware configuration, ...) and after this "Wizard", the site would generate the Howto for building a complete rock-solid Open Xchange server based on Gentoo from scratch.

Here is the idea, I hope that it would interrest some of you there, that doesn't mean this thread or the current howto to become obsolete, on the contrary, in fact, every idea gathered here and even elsewhere would simply be integrated in the "Howto generator".

I'm planning to work on it anyway, I'll be building the "generator", making translation for French users too and begin with what has already be done for the actual howto.


You read my mind!! That was my original plan when I first converted the HOWTO from PDF to HTML.. it would be so easy to add some PHP statements so that a user could customize the HOWTO for themselves. That would allow cutting and pasting.. or even the ability to autogenerate a build script custom for their environment! I don't know of any other HOWTO or guide that does this. I was planning on doing it once the "dust settles" when OX 0.8 finally goes stable... but if you want to tackle it first, be my guest! Maybe you could build the one for your French converted HOWTO and I could do the EN side of things?
Back to top
View user's profile Send private message
bitwh0re
Apprentice
Apprentice


Joined: 29 Apr 2004
Posts: 214

PostPosted: Fri Mar 18, 2005 7:48 pm    Post subject: Reply with quote

To all above, thanks! I'll be collecting all these tips and modifying the HOWTO, thanks for the collective eye!

Mike.
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Goto page Previous  1, 2, 3 ... 20, 21, 22 ... 37, 38, 39  Next
Page 21 of 39

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum