Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Resolutie in xorg.conf wordt niet gepakt
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Dutch
View previous topic :: View next topic  
Author Message
OmeRon
n00b
n00b


Joined: 05 Nov 2004
Posts: 7

PostPosted: Mon Nov 15, 2004 8:49 pm    Post subject: Resolutie in xorg.conf wordt niet gepakt Reply with quote

Wat ik ook probeer, hoger dan een resolutie van 600x400 (schat ik) wordt er niet gepakt.

Dit is mijn huidige xorg.conf:
Code:
Section "ServerLayout"
   Identifier     "X.org Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Mouse0" "CorePointer"
   InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
   RgbPath      "/usr/X11R6/lib/X11/rgb"
   ModulePath   "/usr/X11R6/lib/modules"
   FontPath     "/usr/share/fonts/misc/"
   FontPath     "/usr/share/fonts/TTF/"
   FontPath     "/usr/share/fonts/Type1/"
   FontPath     "/usr/share/fonts/CID/"
   FontPath     "/usr/share/fonts/75dpi/"
   FontPath     "/usr/share/fonts/100dpi/"
EndSection

Section "Module"
   Load  "record"
   Load  "extmod"
   Load  "dbe"
   Load  "dri"
   Load  "glx"
   Load  "xtrap"
   Load  "freetype"
   Load  "type1"
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
EndSection

Section "InputDevice"
   Identifier  "Mouse0"
   Driver      "mouse"
   Option       "Protocol" "auto"
   Option       "Device" "/dev/mouse"
   Option      "ZAxisMapping"   "4 5"
EndSection

Section "Monitor"
   #DisplaySize      20  1330   # mm
   Identifier   "Monitor0"
   VendorName   "@F@"
   ModelName    "0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "pci_burst"             # [<bool>]
        #Option     "fifo_conservative"     # [<bool>]
        #Option     "fifo_moderate"         # [<bool>]
        #Option     "fifo_aggressive"       # [<bool>]
        #Option     "pci_retry"             # [<bool>]
        #Option     "NoAccel"               # [<bool>]
        #Option     "set_mclk"              # <freq>
        #Option     "show_cache"            # [<bool>]
        #Option     "HWCursor"              # [<bool>]
        #Option     "SWCursor"              # [<bool>]
        #Option     "ShadowFB"              # [<bool>]
        #Option     "Rotate"                # [<str>]
        #Option     "VideoKey"              # <i>
        #Option     "ByteSwap"              # [<bool>]
        #Option     "Interlaced"            # [<bool>]
        #Option     "UseBIOS"               # [<bool>]
        #Option     "ZoomOnLCD"             # [<bool>]
   Identifier  "Card0"
   Driver      "siliconmotion"
   VendorName  "Silicon Motion, Inc."
   BoardName   "SM720 Lynx3DM"
   BusID       "PCI:0:2:0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   SubSection "Display"
      Viewport   0 0
      Depth     1
      Modes     "1024x768"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     4
      Modes     "1024x768"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     8
      Modes     "1024x768"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     15
      Modes     "1024x768"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     16"
      Modes     "1024x768"
   EndSubSection
   SubSection "Display"
      Viewport   0 0
      Depth     24
      Modes     "1024x768"
   EndSubSection
EndSection

Back to top
View user's profile Send private message
polle
Veteran
Veteran


Joined: 28 Feb 2003
Posts: 1498
Location: Belgium

PostPosted: Mon Nov 15, 2004 9:05 pm    Post subject: Reply with quote

volgens mij klopt je monitor gedeelte niet, hier moet je de Ve H waarde van je monitor opgeven, een vb (aanpassen aan de waarden van jouw monitor!):

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30-107
VertRefresh 48-120
EndSection
Back to top
View user's profile Send private message
OmeRon
n00b
n00b


Joined: 05 Nov 2004
Posts: 7

PostPosted: Mon Nov 15, 2004 9:08 pm    Post subject: Reply with quote

Thanx man. Het werkt. Nu nog achter de juiste waarden zien te komen :wink:
Back to top
View user's profile Send private message
polle
Veteran
Veteran


Joined: 28 Feb 2003
Posts: 1498
Location: Belgium

PostPosted: Mon Nov 15, 2004 9:14 pm    Post subject: Reply with quote

best, want moderne monitors zijn wel beveiligd en stoppen als je te hoge waarden ingeeft, maar toch opletten want zo zijn vroeger wel meer monitors om zeep geholpen
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Dutch All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum