Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
tvkaartdriver dmesg spam
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Dutch
View previous topic :: View next topic  
Author Message
dpatty
n00b
n00b


Joined: 23 Dec 2004
Posts: 8

PostPosted: Sat Dec 25, 2004 2:28 pm    Post subject: tvkaartdriver dmesg spam Reply with quote

Vanmorgen mijn eerste gentoo lockup gehad (Merry Christmas)......was aan het surfen op mijn laptop totdat de verbinding weg viel..dus ik kijk naar mijn computer en zie ik dat hij vastgelopen is. Zwart scherm en reageert op niks. Dus ff opnieuw opstarten en hij doet het weer allen nu ik in dmesg kijk zie ik het volgende.

Code:

audio_standard_BTSC (status: known-good)
tuner: chip found at addr 0xc2 i2c-bus cx8800[0]
tuner: type set to 28 (LG PAL_BG+FM (TPI8PSB01D)) by cx8800[0]
cx8800[0]: i2c attach [client=LG PAL_BG+FM (TPI8PSB01D)]
cx8800[0]: cx88: tvaudio thread started
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y080L0, ATA DISK drive
hdb: Maxtor 6Y120L0, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Maxtor 6Y120P0, ATA DISK drive
hdd: WDC WD2000JB-00GVA0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
cx8800[0]: AUD_STATUS: 0xfef2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdb: max request size: 128KiB
hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hdb: cache flushes supported
 /dev/ide/host0/bus0/target1/lun0: p1
hdc: max request size: 128KiB
hdc: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hdc: cache flushes supported
 /dev/ide/host0/bus1/target0/lun0: p1
hdd: max request size: 1024KiB
hdd: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdd: cache flushes supported
 /dev/ide/host0/bus1/target1/lun0: p1 p2
libata version 1.02 loaded.
USB Universal Host Controller Interface driver v2.2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-2: nForce2 SMBus adapter at 0x5500
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
ALSA device list:
  #0: Sound Blaster Live! (rev.7) at 0xd400, irq 11
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
cx8800[0]: AUD_STATUS: 0xfcb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: replayed 9 transactions in 0 seconds
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 164k freed
Adding 1004052k swap on /dev/hda3.  Priority:-1 extents:1
ReiserFS: hda4: Removing [159 258714 0x0 SD]..done
ReiserFS: hda4: There were 1 uncompleted unlinks/truncates. Completed
cx8800[0]: AUD_STATUS: 0xfbf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-6111  Tue Jul 27 07:55:38 PDT 2004
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29.
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:04.0 to 64
eth1: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS volume version 3.1.
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf932 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf932 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfbb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfbb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf8f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf932 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf932 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf8f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfcb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfbb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf932 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfbb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfbf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf8f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf932 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfbb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfbb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf932 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfbb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfab2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
cx8800[0]: AUD_STATUS: 0xfb72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
spurious 8259A interrupt: IRQ7.
cx8800[0]: AUD_STATUS: 0xfbb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf8f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf932 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf932 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfa32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfbb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfaf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfcb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xfb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xf8f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO


Waarom deze spam.? En deze spam blijft doorgaan. zit nu op 0xfa72.
Ik weet dus niet waarom mijn systeempje gecrashed is..heb wat in de log files zitten kijken maar niks kunnen vinden.
Iemand een idee om dit aan te pakken?
_________________
"Im like king midas in reverse, everything i touch turns to shit"
Back to top
View user's profile Send private message
coax
Apprentice
Apprentice


Joined: 08 Sep 2003
Posts: 231
Location: Antwerp - Belgium

PostPosted: Sun Dec 26, 2004 11:41 am    Post subject: Reply with quote

Probeer de driver van de tv kaart misschien eens opnieuw te bouwen ...
_________________
- There is no such thing as having too many computers -
Back to top
View user's profile Send private message
Olis
Apprentice
Apprentice


Joined: 29 Sep 2004
Posts: 172
Location: Germany

PostPosted: Tue Jan 11, 2005 6:01 am    Post subject: Re: tvkaartdriver dmesg spam Reply with quote

dpatty wrote:
Vanmorgen mijn eerste gentoo lockup gehad (Merry Christmas)......was aan het surfen op mijn laptop totdat de verbinding weg viel..dus ik kijk naar mijn computer en zie ik dat hij vastgelopen is. Zwart scherm en reageert op niks. Dus ff opnieuw opstarten en hij doet het weer allen nu ik in dmesg kijk zie ik het volgende.

The solution can be found here: https://forums.gentoo.org/viewtopic.php?t=187009

Oliver
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Dutch All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum