Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Can't use firewire harddisk under kernel 2.6.x
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
damm
n00b
n00b


Joined: 12 Nov 2003
Posts: 12

PostPosted: Tue Dec 28, 2004 6:19 am    Post subject: Can't use firewire harddisk under kernel 2.6.x Reply with quote

Hi. I have an iBook(G3 800). I bought a 1394 hard drive(the brand is buslink) and a maxtor 80G harddisk. I installed the harddisk into the hard drive and it worked fine under kernel 2.4.25. But under the (2.6.0-2.6.9) kernel it is recognized however can't work. The following is the main output from 2.6.x kernel when I insert the module sbp2.(I checked all the necessary kernel options. Only sbp2 was compiled as a module, and the others were compiled into the kernel)
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[f5000000-f50007ff] Max Packet=[2048]
[c01bf9d0] ohci1394_pci_probe+0x440/0x504

bus ieee1394: add driver sbp2
scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048]
Vendor: Maxtor 6 Model: Y080L0 Rev:
Type: Direct-Access ANSI SCSI revision: 06
bus scsi: add device 1:0:0:0
SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda:<3>ieee1394: sbp2: aborting sbp2 command
Read (10) 00 00 00 00 00 00 00 08 00
ieee1394: sbp2: aborting sbp2 command
Test Unit Ready 00 00 00 00 00
ieee1394: sbp2: reset requested
ieee1394: sbp2: Generating sbp2 fetch agent reset
ieee1394: sbp2: aborting sbp2 command
Test Unit Ready 00 00 00 00 00
ieee1394: sbp2: reset requested
ieee1394: sbp2: Generating sbp2 fetch agent reset
ieee1394: sbp2: aborting sbp2 command
Test Unit Ready 00 00 00 00 00
ieee1394: sbp2: reset requested
ieee1394: sbp2: Generating sbp2 fetch agent reset
ieee1394: sbp2: aborting sbp2 command
Test Unit Ready 00 00 00 00 00
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
SCSI error : <1 0 0 0> return code = 0x6050000
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
scsi1 (0:0): rejecting I/O to offline device
Buffer I/O error on device sda, logical block 0
unable to read partition table
Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
bound device '1:0:0:0' to driver 'sd'
Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
bound device '0006ca0e0400769f-0' to driver 'sbp2'
Back to top
View user's profile Send private message
ds9
n00b
n00b


Joined: 05 Jan 2004
Posts: 12
Location: France/PARIS

PostPosted: Sat Jan 01, 2005 11:00 pm    Post subject: Reply with quote

damm,

Can you try kernel 2.6.7 ?
It works real fine on my ibook & Gentoo external disk installation.
I still have to test 2.6.9 : I'm cautious as I faced issues with past
kernel (especially 2.6.5).

My .config includes :
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
CONFIG_IEEE1394_SBP2=y
CONFIG_USB_OHCI_HCD=y
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum