Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
gettext fails
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
th0th696
Apprentice
Apprentice


Joined: 08 Dec 2004
Posts: 185

PostPosted: Tue Jun 28, 2005 2:10 am    Post subject: gettext fails Reply with quote

So emerge -u world fails because of gettext? Any clues?


./configure --prefix=/usr --host=powerpc-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --without-java --without-included-gettext --enable-nls
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for powerpc-unknown-linux-gnu-strip... no
checking for strip... :
checking build system type... Invalid configuration `powerpc-unknown-linux-': machine `powerpc-unknown-linux' not recognized
configure: error: /bin/sh build-aux/config.sub powerpc-unknown-linux- failed

!!! Please attach the config.log to your bug report:
!!! /var/tmp/portage/gettext-0.14.4/work/gettext-0.14.4/config.log

!!! ERROR: sys-devel/gettext-0.14.4 failed.
!!! Function econf, Line 485, Exitcode 0
!!! econf failed
!!! If you need support, post the topmost build error, NOT this status message.
Back to top
View user's profile Send private message
kallamej
Administrator
Administrator


Joined: 27 Jun 2003
Posts: 4923
Location: Gothenburg, Sweden

PostPosted: Tue Jun 28, 2005 3:22 pm    Post subject: Reply with quote

Please post the output of
Code:
emerge --info

Moved from Portage & Programming to Gentoo on PPC.
Back to top
View user's profile Send private message
zeekec
n00b
n00b


Joined: 24 Feb 2004
Posts: 56
Location: Athens, GA, USA

PostPosted: Tue Jun 28, 2005 4:00 pm    Post subject: Re: gettext fails Reply with quote

th0th696 wrote:
checking build system type... Invalid configuration `powerpc-unknown-linux-': machine `powerpc-unknown-linux' not recognized

Looks like you're missing the -gnu on your CHOST in make.conf. It should be:
Code:
CHOST=powerpc-unknown-linux-gnu

_________________
Against stupidity the very gods
Themselves contend in vain.
-Johann Christoph Friedrich von Schiller (1801)
Back to top
View user's profile Send private message
th0th696
Apprentice
Apprentice


Joined: 08 Dec 2004
Posts: 185

PostPosted: Tue Jun 28, 2005 9:45 pm    Post subject: Chost Reply with quote

My CHOST is:

CHOST=powerpc-unknown-linux-gnu

in /etc/make.conf

is there anywhere else this might be set?

Here is emerge --info:

emerge --info
Portage 2.0.51.19 (default-linux/ppc/2005.0, gcc-3.4.3, glibc-2.3.4.20041102-r1, 2.6.10-gentoo-r6 ppc)
=================================================================
System uname: 2.6.10-gentoo-r6 ppc 740/750
Gentoo Base System version 1.4.16
Python: dev-lang/python-2.3.5 [2.3.5 (#1, May 27 2005, 10:18:40)]
dev-lang/python: 2.3.5
sys-apps/sandbox: [Not Present]
sys-devel/autoconf: 2.13, 2.59-r6
sys-devel/automake: 1.8.5-r3, 1.5, 1.7.9-r1, 1.6.3, 1.4_p6, 1.9.5
sys-devel/binutils: [Not Present]
sys-devel/libtool: 1.5.16
virtual/os-headers: 2.6.8.1-r4
ACCEPT_KEYWORDS="ppc"
AUTOCLEAN="yes"
CFLAGS="-O2 -mtune=G3 -fno-strict-aliasing -pipe"
CHOST="powerpc-unknown-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/2/share/config /usr/kde/3/share/config /usr/lib/X11/xkb /usr/share/config /var/bind /var/qmail/control"
CONFIG_PROTECT_MASK="/etc/gconf /etc/terminfo /etc/env.d"
CXXFLAGS="-O2 -mtune=G3 -fno-strict-aliasing -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="autoaddcvs autoconfig ccache distcc distlocks sandbox sfperms strict"
GENTOO_MIRRORS="ftp://ftp.gtlib.cc.gatech.edu/pub/gentoo http://csociety-ftp.ecn.purdue.edu/pub/gentoo/ ftp://csociety-ftp.ecn.purdue.edu/pub/gentoo/ ftp://ftp.ussg.iu.edu/pub/linux/gentoo ftp://ftp.ucsb.edu/pub/mirrors/linux/gentoo/ http://gentoo.seren.com/gentoo http://gentoo.chem.wisc.edu/gentoo/ ftp://gentoo.chem.wisc.edu/gentoo/ http://cudlug.cudenver.edu/gentoo/ ftp://cudlug.cudenver.edu/pub/mirrors/distributions/gentoo/ http://gentoo.mirrors.pair.com/ ftp://gentoo.mirrors.pair.com/ http://gentoo.ccccom.com ftp://gentoo.ccccom.com http://gentoo.mirrors.tds.net/gentoo ftp://gentoo.mirrors.tds.net/gentoo http://gentoo.netnitco.net ftp://gentoo.netnitco.net/pub/mirrors/gentoo/source/ http://mirror.tucdemonic.org/gentoo/ http://mirror.clarkson.edu/pub/distributions/gentoo/ http://mirrors.acm.cs.rpi.edu/gentoo/ ftp://ftp.ndlug.nd.edu/pub/gentoo/ http://open-systems.ufl.edu/mirrors/gentoo"
MAKEOPTS="-j4"
PKGDIR="/usr/portage/packages"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
SYNC="rsync://rsync.namerica.gentoo.org/gentoo-portage"
USE="X alsa berkdb bitmap-fonts crypt cups emboss esd fam fortran gif gnome gpm gtk gtk2 imlib ipv6 jpeg kde libwww motif mp3 mpeg mysql ncurses nls oggvorbis opengl pam pdflib perl png ppc python qt readline samba spell ssl tcpd tiff truetype truetype-fonts type1-fonts unicode xml2 xprint xv zlib userland_GNU kernel_linux elibc_glibc"
Unset: ASFLAGS, CBUILD, CTARGET, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTDIR_OVERLAY
Back to top
View user's profile Send private message
fb
l33t
l33t


Joined: 08 Dec 2003
Posts: 636
Location: New Zealand

PostPosted: Tue Jun 28, 2005 10:46 pm    Post subject: Reply with quote

Hi,

How come you don't have any binutils on your machine? It is marked
as not being present on your system. It should one of the fundamental
system package. I would not be susrprised if your compiling failure was
related. Can you emerge any package at all :?

Francois
Back to top
View user's profile Send private message
th0th696
Apprentice
Apprentice


Joined: 08 Dec 2004
Posts: 185

PostPosted: Wed Jun 29, 2005 12:38 am    Post subject: binutils Reply with quote

Eureka! Well nothing solved but getting deeper into the matter (pun intended on the depth remark).

emerge --update --deep world

results in:

checking whether the C compiler (gcc -O2 -mtune=G3 -pipe ) works... no
configure: error: installation or configuration problem: C compiler cannot create executables.

!!! ERROR: sys-devel/binutils-2.15.90.0.3-r5 failed.
!!! Function toolchain-binutils_src_compile, Line 126, Exitcode 1
!!! configure failed
!!! If you need support, post the topmost build error, NOT this status mess

YIKES!!! Now how in the hell did I get a lame handicapped C compiler that hasn't the ability to create executables?!? Anyone have a clue on this one?
Back to top
View user's profile Send private message
fb
l33t
l33t


Joined: 08 Dec 2003
Posts: 636
Location: New Zealand

PostPosted: Wed Jun 29, 2005 1:36 am    Post subject: Reply with quote

Somehow you must have removed binutlils (emerge -C binutils will
not ask any questions). The other possibility is you still have binutils
installed but misconfigured by the the last binutils-config.
Try
Code:
binutils-config -l

and tell us what it says (that's a lower case L in the code).
If you have a profile installed but not enabled that should
be easy. If you don't, you'll need to get a initial tool chain
from an install cd and rebuild the tool chain.
I remember there is a tarball with a rescue tool chain for devellopers
somewhere if you dig deep enough on the web site.

Francois
Back to top
View user's profile Send private message
th0th696
Apprentice
Apprentice


Joined: 08 Dec 2004
Posts: 185

PostPosted: Wed Jun 29, 2005 3:12 am    Post subject: hmmm? Reply with quote

Hmm?
mktulu ~ # binutils-config -l

gives absolutely nothing, but:

mktulu ~ # binutils-config

produces:

Usage: binutils-config [options] [binutils profile]

General Options:
-c, --get-current-profile Print current profile
-l, --list-profiles Print a list of available profiles
-u, --uninstall Remove all signs of specified target
-d, --debug Execute with debug output

Arch Specific Cruft:
--amd64 Install extra amd64 links (x86_64)
--arm Install extra arm links (arm/armeb)
--mips Install extra mips links (mips/mipsel)
--x86 Install extra x86 links (i[3-6]86)

Profile names are of the form: <CTARGET>-<binutils version>
For example: i686-pc-linux-gnu-2.15.92.0.2

For more info, please see binutils-config(8).


Why would the -l option not work?
Back to top
View user's profile Send private message
fb
l33t
l33t


Joined: 08 Dec 2003
Posts: 636
Location: New Zealand

PostPosted: Wed Jun 29, 2005 3:25 am    Post subject: Reply with quote

Well, I think it did work. It means that you don't have any versions
of binutils installed. Check with
Code:
ls -la /usr/powerpc-unknown-linux-gnu/binutils-bin/

If there is any directory under it list it as well. In my case I have:
Code:
ls -la /usr/powerpc-unknown-linux-gnu/binutils-bin/
total 0
drwxr-xr-x  3 root root  80 May 12 18:00 .
drwxr-xr-x  6 root root 152 May 30 10:36 ..
drwxr-xr-x  2 root root 392 May 30 10:36 2.15.90.0.3
fbissey@it019727 ~ $ ls -la /usr/powerpc-unknown-linux-gnu/binutils-bin/2.15.90.0.3/
total 2381
drwxr-xr-x  2 root root    392 May 30 10:36 .
drwxr-xr-x  3 root root     80 May 12 18:00 ..
-rwxr-xr-x  1 root root  86528 May 30 10:36 addr2line
-rwxr-xr-x  1 root root  50764 May 30 10:36 ar
-rwxr-xr-x  1 root root 239992 May 30 10:36 as
-rwxr-xr-x  1 root root  84700 May 30 10:36 c++filt
-rwxr-xr-x  1 root root 156720 May 30 10:36 gprof
-rwxr-xr-x  1 root root 614920 May 30 10:36 ld
-rwxr-xr-x  1 root root  99428 May 30 10:36 nm
-rwxr-xr-x  1 root root 253268 May 30 10:36 objcopy
-rwxr-xr-x  1 root root 257844 May 30 10:36 objdump
-rwxr-xr-x  1 root root  50772 May 30 10:36 ranlib
-rwxr-xr-x  1 root root 205708 May 30 10:36 readelf
-rwxr-xr-x  1 root root  27772 May 30 10:36 size
-rwxr-xr-x  1 root root  27672 May 30 10:36 strings
-rwxr-xr-x  1 root root 253268 May 30 10:36 strip

If you don't have anything at all there, you are in deep
trouble and cannot make any executable. in binutils you
have "ld" which is the actual linker which produce executable
from the compiler output. If there is something in that
directory we have to find a way to enable it. Otherwise
we are looking at getting a rescue toolchain from somewhere
like I said in my previous post.

Francois
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Wed Jun 29, 2005 3:41 am    Post subject: Reply with quote

Well, you've gotten yourself into a bind. binutils-config is a seperate package from binutils. I'm not sure how you managed to do this, but here's how I would fix it:

If you have a GRP CD handy, just use the binary from that, otherwise you'll need to make one:

1. Grab a stage3 and unpack it into a seperate dir.
2. Bind mount your portage tree (mount -o bind /usr/portage /stage3dir/usr/portage)
3. chroot into the stage3
4. Emerge gentoolkit
5. Run: quickpkg binutils
6. Exit from the chroot and emerge -k binutils.

Hope that helps!
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
th0th696
Apprentice
Apprentice


Joined: 08 Dec 2004
Posts: 185

PostPosted: Fri Jul 08, 2005 6:59 pm    Post subject: Seem to be running in circles Reply with quote

1. Grab a stage3 and unpack it into a seperate dir.
2. Bind mount your portage tree (mount -o bind /usr/portage /stage3dir/usr/portage)
3. chroot into the stage3
4. Emerge gentoolkit
5. Run: quickpkg binutils
6. Exit from the chroot and emerge -k binutils.

Everything goes great, until step 6. At which point I get:


>>> Source unpacked.
./configure --prefix=/usr --host=powerpc-unknown-linux-gnu --target=powerpc-unknown-linux-gnu --datadir=/usr/share/binutils-data/powerpc-unknown-linux-gnu/2.15.90.0.3 --infodir=/usr/share/binutils-data/powerpc-unknown-linux-gnu/2.15.90.0.3/info --mandir=/usr/share/binutils-data/powerpc-unknown-linux-gnu/2.15.90.0.3/man --bindir=/usr/powerpc-unknown-linux-gnu/binutils-bin/2.15.90.0.3 --libdir=/usr/lib/binutils/powerpc-unknown-linux-gnu/2.15.90.0.3 --libexecdir=/usr/lib/binutils/powerpc-unknown-linux-gnu/2.15.90.0.3 --includedir=/usr/lib/binutils/powerpc-unknown-linux-gnu/2.15.90.0.3/include --enable-shared --enable-64-bit-bfd --disable-werror --without-included-gettext
creating cache ./config.cache
checking host system type... powerpc-unknown-linux-gnu
checking target system type... powerpc-unknown-linux-gnu
checking build system type... powerpc-unknown-linux-gnu
checking for a BSD compatible install... /bin/install -c
checking for gcc... gcc
checking whether the C compiler (gcc -O2 -mtune=G3 -pipe ) works... no
configure: error: installation or configuration problem: C compiler cannot create executables.

!!! ERROR: sys-devel/binutils-2.15.90.0.3-r5 failed.
!!! Function toolchain-binutils_src_compile, Line 126, Exitcode 1
!!! configure failed
!!! If you need support, post the topmost build error, NOT this status message.
Back to top
View user's profile Send private message
th0th696
Apprentice
Apprentice


Joined: 08 Dec 2004
Posts: 185

PostPosted: Fri Jul 08, 2005 10:52 pm    Post subject: as soon... Reply with quote

As soon as I give up and turn to the forum I usually figger things out. I did a man emerge and was learning exactly what I was doing here. And I simply changed -k to -K and it worked!!! From here I think things may be getting back to normal.
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Fri Jul 08, 2005 11:57 pm    Post subject: Reply with quote

Oops, sorry about that. :)

Glad it worked for you!
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
th0th696
Apprentice
Apprentice


Joined: 08 Dec 2004
Posts: 185

PostPosted: Sat Jul 09, 2005 12:41 am    Post subject: Spoke too soon! Reply with quote

Well, LOL of course I spoke too soon. I think my whole system is entirely hosed. Now all sorts of things are throwing when I do various incarnations of

emerge --update world

deep and otherwise even emerge -e world. I have a stage4 tarball from another duplicate machine made from this script:

https://forums.gentoo.org/viewtopic-t-312817-highlight-backup+howto.html

Is there a way I can rebuild from the tarball on a running system? The computer is headless, and I certainly can stick a monitor and kb on it. But I was wondering if it was possible to do this deep of a restore remotely?
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Sat Jul 09, 2005 2:05 am    Post subject: Reply with quote

Well, you could just unpack over the running system and hope for the best. :p

What kind of problems are you running into?
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
th0th696
Apprentice
Apprentice


Joined: 08 Dec 2004
Posts: 185

PostPosted: Sat Jul 09, 2005 2:49 am    Post subject: yikes! Reply with quote

I was thinking of untaring right into the root of the running system but some voice in the back of my head told me it wouldn't work. But I've gotten to know you through your posts before and you definately know your stuff. Nothing seems strange about untaring over a running system?
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Sat Jul 09, 2005 3:50 am    Post subject: Reply with quote

Well, it's best not to, obviously. :)

If you were feeling really lazy, it's certainly possible, but I'd probably try this first:

1. Try and figure out what broken package is breaking the other ebuilds
2. Unpack the tarball into a seperate directory, chroot in and quickpkg the broken packages so you can reinstall it on the broken system.

If you need help figuring out what else is broken, feel free to post the errors here.
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
th0th696
Apprentice
Apprentice


Joined: 08 Dec 2004
Posts: 185

PostPosted: Sat Jul 09, 2005 3:50 pm    Post subject: Not feeling lazy but adventurous Reply with quote

Okay so the current package which is breaking is bash. Here's the output from emerge:

>>> Source unpacked.
* econf: updating bash-3.0/support/config.guess with /usr/share/gnuconfig/config.guess
* econf: updating bash-3.0/support/config.sub with /usr/share/gnuconfig/config.sub
./configure --prefix=/usr --host=powerpc-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-profiling --without-gnu-malloc
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
checking build system type... Invalid configuration `powerpc-unknown-linux-': machine `powerpc-unknown-linux' not recognized
configure: error: /bin/sh ./support/config.sub powerpc-unknown-linux- failed

!!! Please attach the config.log to your bug report:
!!! /var/tmp/portage/bash-3.0-r12/work/bash-3.0/config.log

!!! ERROR: app-shells/bash-3.0-r12 failed.
!!! Function econf, Line 485, Exitcode 0
!!! econf failed
!!! If you need support, post the topmost build error, NOT this status message.

Here's the aforementioned config.log:

cat /var/tmp/portage/bash-3.0-r12/work/bash-3.0/config.log
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by bash configure 3.0-release, which was
generated by GNU Autoconf 2.57. Invocation command line was

$ ./configure --prefix=/usr --host=powerpc-unknown-linux-gnu --mandir=/usr/share/man --infodir=/usr/share/info --datadir=/usr/share --sysconfdir=/etc --localstatedir=/var/lib --disable-profiling --without-gnu-malloc

## --------- ##
## Platform. ##
## --------- ##

hostname = mktulu
uname -m = ppc
uname -r = 2.6.10-gentoo-r6
uname -s = Linux
uname -v = #1 Wed May 25 15:23:15 CDT 2005

/usr/bin/uname -p = 740/750
/bin/uname -X = unknown

/bin/arch = ppc
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown

PATH: /usr/lib/distcc/bin
PATH: /sbin
PATH: /usr/sbin
PATH: /usr/lib/portage/bin
PATH: /bin
PATH: /usr/bin
PATH: /usr/local/bin
PATH: /opt/bin
PATH: /usr/powerpc-unknown-linux-gnu/gcc-bin/3.4.3


## ----------- ##
## Core tests. ##
## ----------- ##

configure:1400: checking build system type
configure:1413: error: /bin/sh ./support/config.sub powerpc-unknown-linux- failed

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_build=
ac_cv_build_alias=powerpc-unknown-linux-
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-O2 -mtune=G3 -fno-strict-aliasing -pipe'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DEBUGGER_START_FILE_set=
ac_cv_env_DEBUGGER_START_FILE_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=set
ac_cv_env_host_alias_value=powerpc-unknown-linux-gnu
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
bash_cv_termcap_lib=gnutermcap

## ----------------- ##
## Output variables. ##
## ----------------- ##

ALLOCA=''
AR=''
ARFLAGS=''
BASHVERS='3.0'
BUILD_DIR=''
BUILD_INCLUDED_LIBINTL=''
CATOBJEXT=''
CC=''
CC_FOR_BUILD=''
CFLAGS='-O2 -mtune=G3 -fno-strict-aliasing -pipe'
CFLAGS_FOR_BUILD=''
CPP=''
CPPFLAGS=''
CPPFLAGS_FOR_BUILD=''
DATADIRNAME=''
DEBUG=''
DEBUGGER_START_FILE=''
DEFS=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
EMACS=''
EXEEXT=''
GENCAT=''
GLIBC21=''
GMSGFMT=''
HELPDIR=''
HELPDIRDEFINE=''
HELPINSTALL=''
HISTORY_DEP=''
HISTORY_LIB=''
HIST_LIBDIR=''
INSTALL_DATA=''
INSTALL_PROGRAM=''
INSTALL_SCRIPT=''
INSTOBJEXT=''
INTLBISON=''
INTLLIBS=''
INTLOBJS=''
INTL_DEP=''
INTL_INC=''
INTL_LIBTOOL_SUFFIX_PREFIX=''
JOBS_O=''
LDFLAGS=''
LDFLAGS_FOR_BUILD=''
LIBICONV=''
LIBINTL=''
LIBINTL_H=''
LIBOBJS=''
LIBS=''
LOCAL_CFLAGS=''
LOCAL_DEFS=''
LOCAL_LDFLAGS=''
LOCAL_LIBS=''
LTLIBICONV=''
LTLIBINTL=''
LTLIBOBJS=''
MAKE_SHELL=''
MALLOC_DEBUG=''
MALLOC_DEP=''
MALLOC_LDFLAGS=''
MALLOC_LIB=''
MALLOC_LIBRARY=''
MALLOC_SRC=''
MALLOC_TARGET=''
MKINSTALLDIRS=''
MSGFMT=''
MSGMERGE=''
OBJEXT=''
PACKAGE_BUGREPORT='bug-bash@gnu.org'
PACKAGE_NAME='bash'
PACKAGE_STRING='bash 3.0-release'
PACKAGE_TARNAME='bash'
PACKAGE_VERSION='3.0-release'
PATH_SEPARATOR=':'
POSUB=''
PROFILE_FLAGS=''
PURIFY=''
RANLIB=''
READLINE_DEP=''
READLINE_LIB=''
RELSTATUS='release'
RL_INCLUDE=''
RL_INCLUDEDIR=''
RL_LIBDIR=''
RL_MAJOR=''
RL_MINOR=''
RL_VERSION=''
SET_MAKE=''
SHELL='/bin/sh'
SHOBJ_CC=''
SHOBJ_CFLAGS=''
SHOBJ_LD=''
SHOBJ_LDFLAGS=''
SHOBJ_LIBS=''
SHOBJ_STATUS=''
SHOBJ_XLDFLAGS=''
SIGLIST_O=''
SIGNAMES_H=''
STATIC_LD=''
TERMCAP_DEP=''
TERMCAP_LIB=''
TESTSCRIPT=''
USE_INCLUDED_LIBINTL=''
USE_NLS=''
XGETTEXT=''
YACC=''
ac_ct_CC=''
ac_ct_RANLIB=''
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='/usr/share'
exec_prefix='NONE'
host='powerpc-unknown-linux-gnu'
host_alias='powerpc-unknown-linux-gnu'
host_cpu=''
host_os=''
host_vendor=''
htmldir=''
incdir=''
includedir='${prefix}/include'
infodir='/usr/share/info'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
lispdir=''
localstatedir='/var/lib'
mandir='/usr/share/man'
oldincludedir='/usr/include'
prefix='/usr'
program_transform_name='s,x,x,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='/etc'
target_alias=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

#define PACKAGE_BUGREPORT "bug-bash@gnu.org"
#define PACKAGE_NAME "bash"
#define PACKAGE_STRING "bash 3.0-release"
#define PACKAGE_TARNAME "bash"
#define PACKAGE_VERSION "3.0-release"

configure: exit 1


I'm copying the tarball over now. What are your suggestions as to what should be replaced first?
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum