Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Caixa USB 2.0 para ligação a discos IDE [ +- RESOLVIDO ]
View unanswered posts
View posts from last 24 hours
View posts from last 7 days

 
Reply to topic    Gentoo Forums Forum Index Portuguese
View previous topic :: View next topic  
Author Message
GothicKnight
Tux's lil' helper
Tux's lil' helper


Joined: 02 Aug 2004
Posts: 123
Location: Santa Maria da Feira/Portugal

PostPosted: Thu Jul 14, 2005 2:27 pm    Post subject: Caixa USB 2.0 para ligação a discos IDE [ +- RESOLVIDO ] Reply with quote

Eu tenho uma caixa para inserir discos IDE (neste caso tenho um Maxtor 200GB) para o poder transportar e um HUB USB 2.0 tudo da conceptronic. Quando passei para o kernel 2.6.12-r4 (gentoo-sources) o disco simplesmente deixa de responder. Dado isto meti em debug o modulo USB MassStorage que me deu este output:
Code:

Jul 11 23:53:31 DeathStar usb-storage: *** thread sleeping.
Jul 11 23:53:31 DeathStar usb-storage: queuecommand called
Jul 11 23:53:31 DeathStar usb-storage: *** thread awakened.
Jul 11 23:53:31 DeathStar usb-storage: Command READ_10 (10 bytes)
Jul 11 23:53:31 DeathStar usb-storage:  28 00 0e 3a ea 6c 00 00 80 00
Jul 11 23:53:31 DeathStar usb-storage: Bulk Command S 0x43425355 T 0x13e32 L 65536 F 128 Trg 0 LUN 0 CL 10
Jul 11 23:53:31 DeathStar usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 11 23:53:31 DeathStar usb-storage: Status code 0; transferred 31/31
Jul 11 23:53:31 DeathStar usb-storage: -- transfer complete
Jul 11 23:53:31 DeathStar usb-storage: Bulk command transfer result=0
Jul 11 23:53:31 DeathStar usb-storage: usb_stor_bulk_transfer_sglist: xfer 65536 bytes, 11 entries
Jul 11 23:53:31 DeathStar usb-storage: Status code -71; transferred 23040/65536
Jul 11 23:53:31 DeathStar usb-storage: -- unknown error
Jul 11 23:53:31 DeathStar usb-storage: Bulk data transfer result 0x4
Jul 11 23:53:31 DeathStar usb-storage: -- transport indicates error, resetting
Jul 11 23:53:31 DeathStar usb-storage: usb_stor_Bulk_reset called
Jul 11 23:53:31 DeathStar usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 11 23:53:34 DeathStar r8169: eth0: PHY reset until link up
Jul 11 23:53:44 DeathStar r8169: eth0: PHY reset until link up
Jul 11 23:53:51 DeathStar usb-storage: Timeout -- cancelling URB
Jul 11 23:53:51 DeathStar usb-storage: Soft reset failed: -104
Jul 11 23:53:51 DeathStar usb-storage: scsi cmd done, result=0x70000
Jul 11 23:53:51 DeathStar usb-storage: *** thread sleeping.
Jul 11 23:53:51 DeathStar usb-storage: queuecommand called
Jul 11 23:53:51 DeathStar usb-storage: *** thread awakened.
Jul 11 23:53:51 DeathStar usb-storage: Command READ_10 (10 bytes)
Jul 11 23:53:51 DeathStar usb-storage:  28 00 0e 3a ea 6c 00 00 80 00
Jul 11 23:53:51 DeathStar usb-storage: Bulk Command S 0x43425355 T 0x13e33 L 65536 F 128 Trg 0 LUN 0 CL 10
Jul 11 23:53:51 DeathStar usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 11 23:53:54 DeathStar r8169: eth0: PHY reset until link up
Jul 11 23:54:04 DeathStar r8169: eth0: PHY reset until link up
Jul 11 23:54:14 DeathStar r8169: eth0: PHY reset until link up
Jul 11 23:54:21 DeathStar usb-storage: command_abort called
Jul 11 23:54:21 DeathStar usb-storage: usb_stor_stop_transport called
Jul 11 23:54:21 DeathStar usb-storage: -- cancelling URB
Jul 11 23:54:21 DeathStar usb-storage: Status code -104; transferred 0/31
Jul 11 23:54:21 DeathStar usb-storage: -- transfer cancelled
Jul 11 23:54:21 DeathStar usb-storage: Bulk command transfer result=4
Jul 11 23:54:21 DeathStar usb-storage: -- command was aborted
Jul 11 23:54:21 DeathStar usb-storage: usb_stor_Bulk_reset called
Jul 11 23:54:21 DeathStar usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 11 23:54:24 DeathStar r8169: eth0: PHY reset until link up
Jul 11 23:54:30 DeathStar su(pam_unix)[9728]: session opened for user root by (uid=500)
Jul 11 23:54:34 DeathStar r8169: eth0: PHY reset until link up
Jul 11 23:54:41 DeathStar usb-storage: Timeout -- cancelling URB
Jul 11 23:54:41 DeathStar usb-storage: Soft reset failed: -104
Jul 11 23:54:41 DeathStar usb-storage: scsi command aborted
Jul 11 23:54:41 DeathStar usb-storage: *** thread sleeping.
Jul 11 23:54:41 DeathStar usb-storage: queuecommand called
Jul 11 23:54:41 DeathStar usb-storage: *** thread awakened.
Jul 11 23:54:41 DeathStar usb-storage: Command TEST_UNIT_READY (6 bytes)
Jul 11 23:54:41 DeathStar usb-storage:  00 00 00 00 00 00
Jul 11 23:54:41 DeathStar usb-storage: Bulk Command S 0x43425355 T 0x13e33 L 0 F 0 Trg 0 LUN 0 CL 6
Jul 11 23:54:41 DeathStar usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Jul 11 23:54:44 DeathStar r8169: eth0: PHY reset until link up
Jul 11 23:54:51 DeathStar usb-storage: Status code -71; transferred 0/31
Jul 11 23:54:51 DeathStar usb-storage: -- unknown error
Jul 11 23:54:51 DeathStar usb-storage: Bulk command transfer result=4
Jul 11 23:54:51 DeathStar usb-storage: -- transport indicates error, resetting
Jul 11 23:54:51 DeathStar usb-storage: usb_stor_Bulk_reset called
Jul 11 23:54:51 DeathStar usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 11 23:54:51 DeathStar usb-storage: Soft reset failed: -71
Jul 11 23:54:51 DeathStar usb-storage: scsi cmd done, result=0x70000
Jul 11 23:54:51 DeathStar usb-storage: *** thread sleeping.
Jul 11 23:54:51 DeathStar usb-storage: device_reset called
Jul 11 23:54:51 DeathStar usb-storage: usb_stor_Bulk_reset called
Jul 11 23:54:51 DeathStar usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
Jul 11 23:54:51 DeathStar usb-storage: Soft reset failed: -71
Jul 11 23:54:51 DeathStar usb-storage: bus_reset called
Jul 11 23:54:51 DeathStar usb-storage: usb_reset_device returns -19
Jul 11 23:54:51 DeathStar scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
Jul 11 23:54:51 DeathStar SCSI error : <1 0 0 0> return code = 0x70000
Jul 11 23:54:51 DeathStar end_request: I/O error, dev sde, sector 238742124
Jul 11 23:54:51 DeathStar NTFS-fs error (device sde2): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 33945504.
Jul 11 23:54:51 DeathStar scsi1 (0:0): rejecting I/O to offline device


Após isto não tenho outra alternativa senão desligar o disco.... O hardware funciona todo ele bem pois testei em windoze sem qualquer problema, também testei outro disco externo com os mesmos resultados.
Eu penso que seja possivelmente do HUB dado que o kernel tem a opção "Root Hub Transaction Translators" que já testei activada ou desactivada.
Eu não tenho suporte de escrita NTFS e testei o FS tal como por badblocks sem qualquer problema relatado.
_________________
Se a vida não te sorri... Faz-lhe cocegas.


Last edited by GothicKnight on Wed Jul 20, 2005 2:45 pm; edited 1 time in total
Back to top
View user's profile Send private message
xef
Guru
Guru


Joined: 20 Jun 2003
Posts: 460
Location: Porto - Portugal

PostPosted: Thu Jul 14, 2005 3:18 pm    Post subject: Reply with quote

Parece-me que o problema está mesmo no kernel...

Já tive problemas parecidos com uma pendrive e com uma caixa para disco usb (penso que o mesmo modelo da que usas) com um kernel não funcionava, com a versão seguinte passou a funcionar sem alterar mais nenhuma configuração.

O melhor a fazer deve ser voltar à versão do kernel em que o disco funcionava.
Back to top
View user's profile Send private message
GothicKnight
Tux's lil' helper
Tux's lil' helper


Joined: 02 Aug 2004
Posts: 123
Location: Santa Maria da Feira/Portugal

PostPosted: Thu Jul 14, 2005 3:24 pm    Post subject: Reply with quote

O problema é que eu ao instalar o 2.6.12 apaguei o 2.6.11 e o .config desse kernel. Ao voltar a instalar o kernel antigo tenho o mesmo problema. O que me leva a pensar da configuração que já revi vezes sem conta à procura de algo que estivesse mal ou mesmo de código experimental.
_________________
Se a vida não te sorri... Faz-lhe cocegas.
Back to top
View user's profile Send private message
xef
Guru
Guru


Joined: 20 Jun 2003
Posts: 460
Location: Porto - Portugal

PostPosted: Thu Jul 14, 2005 3:31 pm    Post subject: Reply with quote

Se no 2.6.11 repete o problema então é mesmo da configuração...

Posta aí o resultado do dmesg para ver se diz alguma coisa mais util que o debug do modulo mass storage.
Back to top
View user's profile Send private message
GothicKnight
Tux's lil' helper
Tux's lil' helper


Joined: 02 Aug 2004
Posts: 123
Location: Santa Maria da Feira/Portugal

PostPosted: Thu Jul 14, 2005 3:35 pm    Post subject: Reply with quote

Code:

Linux version 2.6.12-gentoo-r4 (root@DeathStar) (gcc version 3.3.5-20050130 (Gentoo Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #9 SMP Thu Jul 14 05:17:00 UTC 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fdf0000 (usable)
 BIOS-e820: 000000001fdf0000 - 000000001fdfb000 (ACPI data)
 BIOS-e820: 000000001fdfb000 - 000000001fe00000 (ACPI NVS)
 BIOS-e820: 000000001fe00000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
509MB LOWMEM available.
found SMP MP-table at 000f6ce0
On node 0 totalpages: 130544
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126448 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6d40
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1fdf705e
ACPI: FADT (v001 SiS    648FX    0x06040000 PTL  0x00000001) @ 0x1fdfaf2e
ACPI: MADT (v001 PTLTD      APIC   0x06040000  LTP 0x00000000) @ 0x1fdfafa2
ACPI: DSDT (v001 Clevo     648FX 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: root=/dev/hda5 video=radeonfb:ywrap,mtrr,1400x1050-32@60 splash=verbose,fadein,theme:emergence quiet CONSOLE=/dev/tty1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 3200.222 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 510172k/522176k available (3728k kernel code, 11480k reserved, 1393k data, 268k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 6324.22 BogoMIPS (lpj=3162112)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay loop... 6389.76 BogoMIPS (lpj=3194880)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
Total of 2 processors activated (12713.98 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0 attaching sched-domain:
 domain 0: span 3
  groups: 1 2
  domain 1: span 3
   groups: 3
CPU1 attaching sched-domain:
 domain 0: span 3
  groups: 2 1
  domain 1: span 3
   groups: 3
checking if image is initramfs... it is
Freeing initrd memory: 1130k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd9d8, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
ACPI: PCI Interrupt Link [LNKG] (IRQs *9)
ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled.
ACPI: Embedded Controller [EC] (gpe 23)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:03: ioport range 0x8000-0x808f could not be reserved
pnp: 00:03: ioport range 0x8090-0x80ff has been reserved
pnp: 00:03: ioport range 0x8100-0x811f has been reserved
pnp: 00:03: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:03: ioport range 0xfe00-0xfe00 has been reserved
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1121353700.704:0): initialized
inotify device minor=63
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
NTFS driver 2.1.22 [Flags: R/O].
Initializing Cryptographic API
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 648 chipset
agpgart: AGP aperture is 64M @ 0xe8000000
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using monotonic_clock().
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
radeonfb: Retreived PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=371.00 Mhz, System=225.00 MHz
radeonfb: PLL min 20000 max 40000
Non-DDC laptop panel detected
radeonfb: Monitor 1 type LCD found
radeonfb: Monitor 2 type no found
radeonfb: panel ID string: Samsung LTN150P1-L02   
radeonfb: detected LVDS panel size from BIOS: 1400x1050
radeondb: BIOS provided dividers will be used
radeonfb: Dynamic Clock Power Management enabled
Console: switching to colour frame buffer device 175x65
fbsplash: console 0 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 0
radeonfb (0000:01:00.0): ATI Radeon NP
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (39 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.9.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18
mice: PS/2 mouse device common for all mice
input: PC Speaker
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
r8169 Gigabit Ethernet driver 2.2LK loaded
PCI: Enabling device 0000:00:0a.0 (0015 -> 0017)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 19 (level, low) -> IRQ 19
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xe0832000, 00:90:f5:28:ab:6a, IRQ 19
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG MP0603H, ATA DISK drive
input: AT Translated Set 2 keyboard on isa0060/serio0
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: Slimtype COMBO LSC-24082K, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 117304992 sectors (60060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
ACPI: PCI Interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 17
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[ec000000-ec0007ff]  Max Packet=[2048]
video1394: Installed video1394 module
ieee1394: raw1394: /dev/raw1394 device initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
PCI: Enabling device 0000:00:0c.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 18
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:0480]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x01001002, devctl 0x44
Yenta: ISA IRQ mask 0x0000, PCI irq 18
Socket status: 30000006
usbmon: debugs is not available
PCI: Enabling device 0000:00:03.3 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 23, io mem 0xec004000
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xec001000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xec002000
usb 1-1: new high speed USB device using ehci_hcd and address 2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:03.2 (0010 -> 0012)
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xec003000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.2
Initializing USB Mass Storage driver...
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090f500006aab28]
usb 1-3: new high speed USB device using ehci_hcd and address 3
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
I2O subsystem v$Rev$
i2o: max drivers = 8
I2O Configuration OSM v$Rev$
I2O Block Device OSM v$Rev$
I2O SCSI Peripheral OSM v$Rev$
I2O ProcFS OSM v$Rev$
i2c /dev entries driver
i2c-sis96x version 1.0.0
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
pc87360: PC8736x not detected, module not inserted.
wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.2
wbsd: Copyright(c) Pierre Ossman
Advanced Linux Sound Architecture Driver Version 1.0.9rc2  (Thu Mar 24 10:33:39 2005 UTC).
PCI: Enabling device 0000:00:02.7 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 1-1.1: new low speed USB device using ehci_hcd and address 5
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:03.3-1.1
intel8x0_measure_ac97_clock: measured 50466 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18
ALSA device list:
  #0: SiS SI7012 with ALC650F at 0x1c00, irq 18
  #1: SiS SI7013 Modem at 0x1400, irq 18
u32 classifier
    OLD policer on
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
ip_conntrack version 2.1 (4079 buckets, 32632 max) - 220 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 10
Disabled Privacy Extensions on device c059e7c0(lo)
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Starting balanced_irq
ACPI wakeup devices:
PCI0 MODM LANC PWRB SLPB  LID
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 268k freed
Adding 497972k swap on /dev/hda7.  Priority:-1 extents:1
  Vendor: GENERIC   Model: USB Storage-SMC   Rev: 014D
  Type:   Direct-Access                      ANSI SCSI revision: 00
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
  Vendor: GENERIC   Model: USB Storage-CFC   Rev: 014D
  Type:   Direct-Access                      ANSI SCSI revision: 00
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
  Vendor: GENERIC   Model: USB Storage-MMC   Rev: 014D
  Type:   Direct-Access                      ANSI SCSI revision: 00
Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
  Vendor: GENERIC   Model: USB Storage-MSC   Rev: 014D
  Type:   Direct-Access                      ANSI SCSI revision: 00
Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3
usb-storage: device scan complete
usbcore: registered new driver spca5xx
/usr/src/spca5xx-20050501/drivers/usb/spca5xx.c: spca5xx driver 00.56.02 registered
alps.c: Enabling hardware tapping
input: PS/2 Mouse on isa0060/serio4
input: AlpsPS/2 ALPS GlidePoint on isa0060/serio4
r8169: eth0: link up
r8169: eth0: link up
fbsplash: console 1 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 1
fbsplash: console 2 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 2
fbsplash: console 3 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 3
fbsplash: console 4 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 4
fbsplash: console 5 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 5
fbsplash: console 6 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 6
fbsplash: console 7 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 7
fbsplash: console 8 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 8
fbsplash: console 9 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 9
fbsplash: console 10 using theme 'emergence'
fbsplash: switched splash state to 'on' on console 10
eth0: no IPv6 routers present
usb 1-1.2: new high speed USB device using ehci_hcd and address 6
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
  Vendor: Maxtor    Model: 5000XT v01.00.00  Rev: 0100
  Type:   Direct-Access                      ANSI SCSI revision: 00
SCSI device sde: 490232832 512-byte hdwr sectors (250999 MB)
sde: assuming drive cache: write through
SCSI device sde: 490232832 512-byte hdwr sectors (250999 MB)
sde: assuming drive cache: write through
 /dev/scsi/host1/bus0/target0/lun0: p1 p2
Attached scsi disk sde at scsi1, channel 0, id 0, lun 0
usb-storage: device scan complete
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev sde1.
NTFS volume version 3.1.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev sde2.
NTFS volume version 3.1.
scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 0 lun 0
SCSI error : <1 0 0 0> return code = 0x70000
end_request: I/O error, dev sde, sector 42824503
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824440.
scsi1 (0:0): rejecting I/O to offline device
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824441.
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824442.
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824443.
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824444.
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824445.
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824446.
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824447.
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824448.
NTFS-fs error (device sde1): ntfs_end_buffer_async_read(): Buffer I/O error, logical block 42824449.
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
scsi1 (0:0): rejecting I/O to offline device
usb 1-1.2: USB disconnect, address 6
scsi1 (0:0): rejecting I/O to device being removed

_________________
Se a vida não te sorri... Faz-lhe cocegas.
Back to top
View user's profile Send private message
GothicKnight
Tux's lil' helper
Tux's lil' helper


Joined: 02 Aug 2004
Posts: 123
Location: Santa Maria da Feira/Portugal

PostPosted: Fri Jul 15, 2005 3:52 pm    Post subject: Reply with quote

OK... de um momento para o outro o disco agora funciona perfeitamente. Não mudando absolutamente nada, não sei a razão para tal mas gostava de saber se alguem tem explicação dado que não convem nada acontecer outra vez e já agora fica registado para o futuro se alguem tiver o mesmo problema.
_________________
Se a vida não te sorri... Faz-lhe cocegas.
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7695
Location: Pelotas, BR

PostPosted: Fri Jul 15, 2005 4:23 pm    Post subject: Reply with quote

Parece eu com um modem Speetouch USB :)
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
GothicKnight
Tux's lil' helper
Tux's lil' helper


Joined: 02 Aug 2004
Posts: 123
Location: Santa Maria da Feira/Portugal

PostPosted: Mon Jul 18, 2005 4:35 pm    Post subject: Reply with quote

Pois é... isto parece que voltou ao mesmo. Da mesma maneira que o problema desapareceu, voltou a aparecer!
O que mudou? Bem desloquei-me da Guarda(onde não funciona) para o Porto(onde funciona). Bem aqui(Guarda) é mais que sabido que a corrente não é das melhores e que tem picos variados de corrente. Será disso???... Muito sinceramente estou aberto a opiniões ( mesmo do tipo twilight zone ) dado a excentricidade do problema!
_________________
Se a vida não te sorri... Faz-lhe cocegas.
Back to top
View user's profile Send private message
pilla
Administrator
Administrator


Joined: 07 Aug 2002
Posts: 7695
Location: Pelotas, BR

PostPosted: Mon Jul 18, 2005 5:23 pm    Post subject: Reply with quote

Da uma olhada nos contatos. Pode ser sujeira, mau acoplamento.
_________________
"I'm just very selective about the reality I choose to accept." -- Calvin
Back to top
View user's profile Send private message
GothicKnight
Tux's lil' helper
Tux's lil' helper


Joined: 02 Aug 2004
Posts: 123
Location: Santa Maria da Feira/Portugal

PostPosted: Wed Jul 20, 2005 2:44 pm    Post subject: Reply with quote

OK... isto tanto funciona como não funciona. Dado ser impossivel obter algo concreto ao assunto e isto varia mediante a posição da lua e do vento acho que não vale apena falar muito nisto. Penso que o problema também deva dar em windoze mas dado que eles são mais do que especialistas em ocultar erros dou como resultado falhas de hardware.
_________________
Se a vida não te sorri... Faz-lhe cocegas.
Back to top
View user's profile Send private message
xef
Guru
Guru


Joined: 20 Jun 2003
Posts: 460
Location: Porto - Portugal

PostPosted: Thu Jul 21, 2005 1:17 pm    Post subject: Reply with quote

Talvez seja algum tipo de novas armas electronicas que estão a testar na base militar secreta da Guarda :lol:

Já tive um problema parecido com um rato e teclado USB... Se ligasse os dois nas tomadas da frente (o pc tinha 2 tomadas na frente e 2 na parte de tras)o rato não funcionava, se ligasse um ba frente e outro atras funcionavam os dois, se ligasse os dois na frente mas trocados já funcionavam e tambem havia uma das tomadas de tras onde o rato não funcionava...

Por isso, experimenta diferentes combinações de tomadas USB...
Back to top
View user's profile Send private message
GothicKnight
Tux's lil' helper
Tux's lil' helper


Joined: 02 Aug 2004
Posts: 123
Location: Santa Maria da Feira/Portugal

PostPosted: Thu Jul 21, 2005 6:35 pm    Post subject: Reply with quote

É mesmo de mania. Tanto dá como não dá. A hipotese da arma secreta é bastante plausivel dado que outras resposta com base no além estariam fora do meu foco de pensamento... Mas não descarto a possibilidade :)
_________________
Se a vida não te sorri... Faz-lhe cocegas.
Back to top
View user's profile Send private message
xef
Guru
Guru


Joined: 20 Jun 2003
Posts: 460
Location: Porto - Portugal

PostPosted: Fri Jul 22, 2005 12:02 pm    Post subject: Reply with quote

Penso que os espiritos e demónios não percebem muito de electronica para poder fazer uma coisa dessas...

por outro lado, se calhar por eles não se perceberem e meterem-se a mexer nisso é que tanto dá como não dá :P
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Portuguese All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum