Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
[ HOWTO ] Gentoo on a Targa Companion 826 - ATI X700 - WLAN
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks
View previous topic :: View next topic  
Author Message
Dosenbier
n00b
n00b


Joined: 15 Jun 2005
Posts: 22

PostPosted: Wed Jul 20, 2005 4:26 pm    Post subject: [ HOWTO ] Gentoo on a Targa Companion 826 - ATI X700 - WLAN Reply with quote

Ok, finally i solved *most* of my problems with my laptop, so i wanted to share it in case anyone experiences the same difficulties.

First of all my setup:
- As stated in the topic: Targa Companion 826
- GFX: ATI X700 (64 MB)
- RAM: 1024 MB (important later on to fix the MTRR-Error)
- Gentoo-Sources 2.6.12-r6 x86 (i686-stage3-install)
- ati-drivers- 8.4.13-r2 (patched with the kernel-2.6-agpgart.patch)
- snd-atiixp + snd-atiixp-modem (still minor difficulties - sound stil just through the headphones jack)
- ndiswrapper to get my Inprocomm IPN2200 working

1. I made a script to avoid the mttr-error:
(seen at: http://www.rage3d.com/board/showthread.php?s=e8f78da5b32a08983407d44d7716145c&t=33736241&page=1&pp=30)

Code:

#/opt/mttr-fix.sh with chmod 777 and added to /etc/conf.d/local.start
#big applause to WhO_KnOwS at the rage3d-forums
#!/bin/bash

echo "disable=1" >| /proc/mtrr
echo "base=0xe0000000 size=0x4000000 type=write-combining" >| /proc/mtrr


2. Then i applied the kernel-2.6.12-agpgart.patch following the advice of Jimmy Jazz (page2) in https://forums.gentoo.org/viewtopic-t-353295-postdays-0-postorder-asc-highlight-agpgart+patch-start-25.html

Code:


// http://lenny.v-brne.net/fglrx <- grab patch here
// In your overlay directory run:

#mkdir media-video/ati-drivers
#cd media-video/ati-drivers
#( cd /usr/portage/media-video/ati-drivers; tar cf - files ) | tar xvf -

// copy also ati-drivers-8.14.13-r1.ebuild into your media-video/ati-drivers overlay directory
// and rename it to ati-drivers-8.14.13-r2.ebuild for instance.

#cp  fglrx-2.6-agpgart.patch media-video/ati-drivers/files
#locate ati-drivers-8.14.13-r1.ebuild

// You can now add the patches you need, like following

# diff -ruN  /usr/portage/media-video/ati-drivers/ati-drivers-8.14.13-r1.ebuild ati-drivers-8.14.13-r2.ebuild
--- /usr/portage/media-video/ati-drivers/ati-drivers-8.14.13-r1.ebuild  2005-06-25 11:05:44.000000000 +0200
+++ ati-drivers-8.14.13-r2.ebuild       2005-07-04 11:04:27.000000000 +0200
@@ -73,6 +73,8 @@
        then
                epatch ${FILESDIR}/fglrx-2.6.12-pci_name.patch
                epatch ${FILESDIR}/fglrx-2.6.12-inter_module_get.patch
+               #epatch ${FILESDIR}/fglrx-2.6-agpgart.patch
+               epatch ${FILESDIR}/kernel-2.6.12-agpgart.patch
        fi
        epatch ${FILESDIR}/8.8.25-via-amd64.patch
        epatch ${FILESDIR}/8.8.25-smp.patch

// Finally you need to create a digest file for your package..

#ebuild ati-drivers-8.14.13-r2.ebuild digest
#emerge -av =ati-drivers-8.14.13-r2



Thanx to Lenny_ and Jimmy Jazz !!!

3. The last step was to follow the http://gentoo-wiki.com/HOWTO_ATI_Drivers - the "Blank screen or monitor turning off after startx" section.
(setting the HSync2 and VRefresh2 correctly and commenting out the two other lines)

Enjoy ! 8)

4. Now I got the Inprocomm IPN2200 finally working !

The steps for that were:
- installing ndiswrapper and copying the NT inf + sys files in an extra folder
- type : ndiswrapper -i <yourdriver>.inf
- type: ndiswrapper -l to see if its working with your card.
if it reads like this everything went ok
Code:

Installed ndis drivers:
neti2220        driver present, hardware present


- type: echo "ndiswrapper" >> /etc/modules.autoload.d/kernel-2.6
- made a startup shell-script like the following

Code:

#!/bin/bash
#file: connect_wlan.sh

iwconfig wlan0 mode Managed
iwconfig wlan0 key <yourHEX(!)key> # the card doesn't support ascii-keys
iwconfig wlan0 essid <youressid>
iwconfig wlan0 rate auto
dhcpcd wlan0
/etc/init.d/ntpd start


- add this to /etc/conf.d/local.start, and do NOT add net.wlan0 and ntpd to runlevel default ! This time it works !!! :D

NOTE: If you are using vpnclient, be sure to use the 4.6.00 (0045) version. Higher versions caused some trouble and wouldn't connect.
In that case your connect-script could look like that:

Code:

iwconfig wlan0 mode Managed
iwconfig wlan0 essid youressid
iwconfig wlan0 rate auto
iwconfig wlan0 key off
iwconfig wlan0 enc off
dhcpcd wlan0
#/etc/init.d/firestarter start
/etc/init.d/vpnclient_init start
/opt/cisco-vpnclient/bin/vpnclient connect yourprofile user USER pwd PWD


Done ! 8)

To get the internal speakers turned on:

Code:
echo 74 0800 > /proc/asound/card0/codec97#0/ac97#0-0+regs


For completeness here are my config-files:

Code:
# File: xorg.conf
# File generated by fglrxconfig (C) ATI Technologies, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
    Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
#    Group 100    # users
#    Mode 0660
EndSection

# **********************************************************************

# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"     # Double buffer extension


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the Type1 and FreeType font modules
    Load        "type1"
    Load        "freetype"

# This loads the GLX module
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath   "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#


    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier   "Keyboard1"
    Driver   "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option "Protocol"   "Xqueue"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option "Xleds"      "1 2 3"

#    Option "LeftAlt"    "Meta"
#    Option "RightAlt"   "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"   "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"   "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"  "de"
# or:
#    Option "XkbLayout"  "de"
#    Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    Option "XkbRules"   "xfree86"
#    Option "XkbModel"   "pc101"
#    Option "XkbLayout"  "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""

#    Option "XkbDisable"

    Option "XkbRules"   "xfree86"
    Option "XkbModel"   "pc101"
    Option "XkbLayout"   "de"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier   "Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "ZAxisMapping"   "4 5"
    Option "Device"     "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option "Protocol"   "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"   "9600"
#    Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"         "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "1412"
#    Option     "MaxX"           "15184"
#    Option     "MinY"           "15372"
#    Option     "MaxY"           "1230"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"         "/dev/ttyS0"
#    Option     "MinX"           "231"
#    Option     "MaxX"           "3868"
#    Option     "MinY"           "3858"
#    Option     "MaxY"           "272"
#    Option     "ScreenNumber"   "0"
#    Option     "ReportingMode"  "Scaled"
#    Option     "ButtonThreshold"    "17"
#    Option     "ButtonNumber"   "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   49.68
    VertRefresh 60
    Option "DPMS"

# === mode lines based on GTF ===
# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
Modeline "1280x800_60.00"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync


EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier  "Standard VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset     "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver      "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# installed.

#    BusID       "PCI:0:10:0"

#    VideoRam    256

#    Clocks      25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
#   Option "DesktopSetup"               "0x00000100"
    Option "MonitorLayout"              "LVDS, NONE"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "49.68"
    Option "VRefresh2"                  "60"
#   Option "ScreenOverlap"              "0"
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    Option "KernelModuleParm"           "agplock=0" # AGP locked user pages: disabled
#    BusID "PCI:1:0:0"    # no device found at config time
    Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.

Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    #Option "backingstore"

    Subsection "Display"
        Depth       24
        Modes       "1280x800"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
#        Virtual     1280 1024
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

    Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###


Code:
# file: package.keywords
media-video/ati-drivers ~x86
media-video/ati-drivers-extra ~x86


Code:

#file: make.conf

# These settings were set by the catalyst build script that automatically built this stage
# Please consult /etc/make.conf.example for a more detailed example
CFLAGS="-O2 -march=i686 -fomit-frame-pointer -pipe"
CHOST="i686-pc-linux-gnu"
CXXFLAGS="${CFLAGS}"

MAKEOPTS="-j2"

GENTOO_MIRRORS="ftp://ftp.tu-clausthal.de/pub/linux/gentoo/ ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo http://linux.rz.ruhr-uni-bochum.de/download/gentoo-mirror/ ftp://linux.rz.ruhr-uni-bochum.de/gentoo-mirror/ http://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://ftp.uni-erlangen.de/pub/mirrors/gentoo ftp://ftp.join.uni-muenster.de/pub/linux/distributions/gentoo ftp://ftp.wh2.tu-dresden.de/pub/mirrors/gentoo ftp://ftp.join.uni-muenster.de/pub/linux/distributions/gentoo http://mirrors.sec.informatik.tu-darmstadt.de/gentoo/ http://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ ftp://ftp-stud.fht-esslingen.de/pub/Mirrors/gentoo/ ftp://ftp.gentoo.mesh-solutions.com/gentoo/ http://pandemonium.tiscali.de/pub/gentoo/ ftp://pandemonium.tiscali.de/pub/gentoo/"
SYNC="rsync://rsync.de.gentoo.org/gentoo-portage"

USE="plugin 3dnow X Xaw3d acpi aim alsa apm arts audiofile avi bonobo bzlib calendar cdr cups directfb divx4linux dvd dvdr eds encode flac flash ftp gb gif glx gnome gpm gstreamer gtk gtk2 gtkhtml  gimpprint icq jabber jack java jpeg kde kerberos mime ming mmx motif mozilla mp3 mpeg msn ncurses oggvorbis openal opengl oss pcmcia pdflib perl php png pnp python qt quicktime readline ruby samba scanner sdl spell sse ssl svg tiff truetype unicode usb userlocales videos wxwindows xine xml xml2 xmms xpm xvid yahoo zlib"

LANG="de_DE@euro"
LANGUAGE="49"
LINGUAS="de"

VIDEO_CARDS="radeon"
ALSA_CARDS="atiixp"

PORTDIR_OVERLAY="/usr/local/portage"


Code:

# file: grub.conf
# the notimercheck fixes the clock bug which caused the time to go twice as fast
# the noapic is necessary to avoid some other error i already forgot ... ;)
default 0
timeout 30

splashimage=(hd0,4)/grub/splash.xpm.gz

title=WindowsXP
rootnoverify (hd0,0)
makeactive
chainloader +1

title=Gentoo Linux 2.6.12
root (hd0,4)
kernel /kernel-genkernel-x86-2.6.12-gentoo-r6 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda7 notimercheck noapic video=vesafb:ywrap,mtrr vga=0x318
initrd /initramfs-genkernel-x86-2.6.12-gentoo-r6

title=Gentoo Linux 2.6.12 Splash
root (hd0,4)
kernel /kernel-genkernel-x86-2.6.12-gentoo-r6 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda7 vga=791 video=vesafb:ywrap,mtrr notimercheck noapic splash=silent,theme:livecd-2005.1 CONSOLE=/dev/tty1 quiet
initrd /initramfs-genkernel-x86-2.6.12-gentoo-r6


Enjoy ! :)

PS: If anyone solved the problem with the sound just working through the headphones-jack, i'd appreciate if you write me an email or better append the solution to this topic
(I tried for several weeks all stuff i've found on dozens of websites, every alsamixer configuration, but still no luck)

Greets and a big bow for everyone out there who helped me with this (i just wanted to collect all that in one thread) !

Dosenbier


Last edited by Dosenbier on Tue Nov 15, 2005 12:00 pm; edited 16 times in total
Back to top
View user's profile Send private message
ian!
Bodhisattva
Bodhisattva


Joined: 25 Feb 2003
Posts: 3829
Location: Essen, Germany

PostPosted: Wed Jul 20, 2005 5:00 pm    Post subject: Reply with quote

Moved from 'Installing Gentoo'.
_________________
"To have a successful open source project, you need to be at least somewhat successful at getting along with people." -- Daniel Robbins
Back to top
View user's profile Send private message
Dosenbier
n00b
n00b


Joined: 15 Jun 2005
Posts: 22

PostPosted: Thu Jul 21, 2005 9:49 am    Post subject: Reply with quote

UPDATE: Now wireless is working and included in the [HOWTO]

Greetings !

Dosenbier
Back to top
View user's profile Send private message
Dosenbier
n00b
n00b


Joined: 15 Jun 2005
Posts: 22

PostPosted: Tue Nov 15, 2005 11:58 am    Post subject: Reply with quote

Speakers are working !
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Documentation, Tips & Tricks All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum