Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
Native Airport Extreme Drivers
View unanswered posts
View posts from last 24 hours

Goto page Previous  1, 2, 3 ... 26, 27, 28 ... 40, 41, 42  Next  
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Gentoo on PPC
View previous topic :: View next topic  
Author Message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Tue Jun 13, 2006 7:28 pm    Post subject: Reply with quote

Is the driver loaded? What does this show: lspci -vvn | grep -i 14e4
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
iplayfast
l33t
l33t


Joined: 08 Jul 2002
Posts: 642
Location: Cambridge On,CA

PostPosted: Tue Jun 13, 2006 7:39 pm    Post subject: Reply with quote

JoseJX wrote:
Is the driver loaded? What does this show: lspci -vvn | grep -i 14e4

06:02.0 0280: 14e4:4319 (rev 02)
(edited a typo)
Back to top
View user's profile Send private message
iplayfast
l33t
l33t


Joined: 08 Jul 2002
Posts: 642
Location: Cambridge On,CA

PostPosted: Tue Jun 13, 2006 7:45 pm    Post subject: Reply with quote

JoseJX wrote:
Is the driver loaded? What does this show: lspci -vvn | grep -i 14e4

I'm using links so I'm making lots of errors...

anyways
lsmod shows
Code:

Module                  Size  Used by
bcm43xx               397440  0
ieee80211softmac       18432  1 bcm43xx
ieee80211              35304  2 bcm43xx,ieee80211softmac
ieee80211_crypt         2944  1 ieee80211

lspci shows
Code:

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio
Controller (rev 02)
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)06:02.0 Network controller: Broadcom Corporation Dell Wireless 1470 DualBand WLAN (rev 02)
06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:04.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
06:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Back to top
View user's profile Send private message
JofCore
Tux's lil' helper
Tux's lil' helper


Joined: 08 Jun 2004
Posts: 116

PostPosted: Thu Jun 15, 2006 1:42 am    Post subject: Reply with quote

JoseJX wrote:
You probably don't have the WEP ciphers enabled. Make sure you enabled the correct crypto options.

Bingo! Just had to find the right one...

I finally got NetworkManager working from Gentopia, and that made it a lot easier for me to troubleshoot by making the key entering process much easier on me :)
When it wouldn't connect, I checked dmesg and found this:
Code:
ieee80211_crypt_wep: could not allocate crypto API arc4

A quick check in my kernel .config showed that I had ARC4 already compiled as a module, so I did a modprobe arc4, and then tried connecting again with NetworkManger. It's working flawlessly now :D

thx!!!
Back to top
View user's profile Send private message
bastianbbux
n00b
n00b


Joined: 16 Jun 2006
Posts: 6

PostPosted: Fri Jun 16, 2006 4:45 pm    Post subject: Reply with quote

Hi, I just wanted to thank you for your hard work on this. I managed to get my AE working flawlessly with WPA after some reading. I'm actually using it under Ubuntu (don't kill me, I use Gentoo too, and I love it), but I know it's all your merit.
I'm glad we have some Spanish developers here doing great things like this. ;)
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Sat Jun 17, 2006 3:13 am    Post subject: Reply with quote

iplayfast:
Which kernel are you using? 4319 support was added late in the 2.6.17_rc cycle.

JofCore:
Glad it's working!

bastianbux:
I'm not spanish, but thanks :)
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
bastianbbux
n00b
n00b


Joined: 16 Jun 2006
Posts: 6

PostPosted: Sat Jun 17, 2006 12:22 pm    Post subject: Reply with quote

Ups, sorry. Long ago I talked about this with someone and I understood (wrongly, it seems) it was a Spanish devel that was working on it, and your nick sounds like Spanish, too. Then you are out of my list. Just kidding, thanks again.
Back to top
View user's profile Send private message
Skinkie
n00b
n00b


Joined: 13 Nov 2004
Posts: 27
Location: The Netherlands

PostPosted: Mon Jun 19, 2006 1:14 pm    Post subject: Open authetication still fails... Reply with quote

SoftMAC: Sent Authentication Request to 00:04:75:62:7d:3b.
SoftMAC: Sent Authentication Request to 00:04:75:62:7d:3b.
SoftMAC: Sent Authentication Request to 00:04:75:62:7d:3b.
SoftMAC: Sent Authentication Request to 00:04:75:62:7d:3b.
SoftMAC: Sent Authentication Request to 00:04:75:62:7d:3b.
SoftMAC: Authentication timed out with 00:04:75:62:7d:3b
SoftMAC: sent association request!
SoftMAC: assoc request timed out!


I really wonder why the most basic thing like an open network fails if everything else seems to work for everyone. Now on kernel 2.6.17
_________________
Support Eachother, Copy Dutch Property!
Back to top
View user's profile Send private message
salfter
n00b
n00b


Joined: 02 Jan 2003
Posts: 63

PostPosted: Mon Jun 19, 2006 9:53 pm    Post subject: Tool to switch WiFi on/off? Reply with quote

/. had an article today on the release of Linux 2.6.17. It mentioned that it includes Broadcom WiFi support (among other things), so I pulled it into my HP L2000 (after verifying that gentoo-sources-2.6.17 was already in Portage), and after a few hours of farting around with it, it's now connecting to the 802.11b AP at work (using 128-bit WEP). 8) The next challenge will be to get it talking to the 802.11g AP (using WPA) at home.

One thing I found, though, that caused some trouble is that the radio can be switched on/off by a Windows-based tool that HP provides. Their "Wireless Assistant" enables WiFi and Bluetooth to be enabled/disabled independently. I normally had Bluetooth enabled (for my mouse and phone) and WiFi disabled (because a wired connection is faster at work), but didn't count on this setting carrying over to Linux. Making sure WiFi was enabled while booted into Windows was what ended up getting it working under Linux.

There is a button above the keyboard that will kill both WiFi & Bluetooth, but killing Bluetooth means my mouse quits working. I found rfswitch, but the ebuild for it fails to build (manual build doesn't work much better, either) and I'm not sure if that project even supports my notebook anyway. Is there some other project that provides a working tool to switch wireless on/off on HP notebooks?

Update: Upon getting home, I tried connecting to a couple of access points (a WAP54G with Linksys firmware running as an open access point and a WRT54GL with OpenWRT running as a WPA-secured access point). At first, the computer would connect to neither. It would connect to the open access point after rebooting into Windows and then rebooting into Linux. After power-cycling and booting back into Linux, it still connected to the open access point. :? Bringing the interface down with the init script and bringing it back up appears to not work, so it looks like the interface is only brought up correctly at boot. Trying to change the configuration appears to require a reboot, which it shouldn't.

I then did some more experimentation with the RF switch. After booting into Windows, disabling WiFi with the Wireless Assistant, shutting down, and booting into Linux, the computer wouldn't connect to anything. Repeating all of the above, but turning WiFi back on, enabled the computer to connect to the open access point. At least it appears that the computer doesn't need to boot into Windows first before using wireless; the state of the software control on the RF switch appears to be persistent through a power cycle.

On the hardware side of the RF switch, pressing the button to switch off the connection doesn't turn out the light as you'd expect. A KDE popup tells me Bluetooth is disconnected, which I expect. Pings no longer get through to the router. Pressing the button again enables the pings to go through (and another KDE popup tells me Bluetooth is reconnected). It appears that the light is on whenever the WiFi interface is up, regardless of the state of the RF switch.

I still need to try getting it to connect to the WPA-secured access point.

Update 2: WPA turned out to be easier than I thought it would be, and wpa_supplicant also appears to be much more usable for network config than mucking about with things manually. Once it's emerged, include this in your /etc/conf.d/net:

Code:

modules_eth1=("wpa_supplicant")
wpa_supplicant_eth1="-Dwext"


Copy /etc/wpa_supplicant.conf.example into /etc/wpa_supplicant.conf. Edit /etc/wpa_supplicant.conf to include the following line at the beginning:

Code:

update_config=1


Restart /etc/init.d/net.eth1. At first, you won't be connected to anything, but that's easy to fix. Fire up wpa_gui, scan for your access point, double-click its SSID, plug in your PSK (assuming that you're using WPA-PSK), click Add, and wait a few seconds for the connection to be established and IP address to be handed out by your DHCP server. wpa_supplicant appears to have some glitches in the way it handles WEP that I've not figured out, but maybe I can talk the boss into replacing the WAP11 we're using at the office. :-)

The only remaining snag at this point is that I can only connect at 11 Mbps. Windows has no problem connecting at 54 Mbps, so it's not a problem on the AP end.
Back to top
View user's profile Send private message
magfrump
n00b
n00b


Joined: 10 Aug 2005
Posts: 19
Location: Arcata, CA

PostPosted: Tue Jun 20, 2006 7:26 am    Post subject: Reply with quote

I'm having a similar error to this:

Quote:

Code:
WARNING: Error inserting ieee80211softmac (/lib/modules/2.6.16-rc5/kernel/net/ieee80211/softmac/ieee80211softmac.ko): Unknown symbol in module, or unknown parameter (see dmesg)
FATAL: Error inserting bcm43xx (/lib/modules/2.6.16-rc5/kernel/drivers/net/wireless/bcm43xx.ko): Invalid module format

whenI run modprobe bcm43xx itself.


to which the solution posted was:

Quote:

You must include wireless networking support in your kernel, that will fix your first and second errors.


however, as far as I can tell wireless networking support is enabled, and I still get:

Code:
WARNING: Error inserting ieee80211softmac (/lib/modules/2.6.17-gentoo/kernel/net/ieee80211/softmac/ieee80211softmac.ko): Invalid module format


when I run modprobe bcm43xx.

Could there be a wireless option in my kernell I'm not seeing (i.e. that was not posted on page 1) or is there another solution here?

Thanks,
Mitchell
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Tue Jun 20, 2006 9:04 pm    Post subject: Reply with quote

What does it say in dmesg?
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
magfrump
n00b
n00b


Joined: 10 Aug 2005
Posts: 19
Location: Arcata, CA

PostPosted: Wed Jun 21, 2006 5:17 am    Post subject: Reply with quote

all it says now is
Code:
bcm43xx driver


grepping for 43xx or for bcm.

modprobe bcm43xx no longer gives me an error, but I still have only eth0 and lo under ifconfig and iwconfig.
Back to top
View user's profile Send private message
t35t0r
n00b
n00b


Joined: 27 Feb 2005
Posts: 68
Location: irc.freenode.net

PostPosted: Wed Jun 21, 2006 6:03 am    Post subject: Reply with quote

anyone tried the 2.6.17 driver? It looks as if ndiswrapper is easier and just works with wpa_supplicant. This looks like more work than it's worth. What is the purpose of firmware cutting? Why can't this work like a regular eth0 driver (e.g. reverse engineered forcedeth)?
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Wed Jun 21, 2006 10:37 am    Post subject: Reply with quote

magfrump:
You probably have an unsupported card. What does lspci -vvn | grep -i 14e4 show?

t35t0r:
NDISwrapper doesn't work on ppc systems, so this driver is better than nothing. As for the firmware, the card doesn't have a "ROM" with built in firmware, it's uploaded on startup. Because this data is copyrighted by Broadcom, it can't be included with the driver, so you need to get it yourself.
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
magfrump
n00b
n00b


Joined: 10 Aug 2005
Posts: 19
Location: Arcata, CA

PostPosted: Wed Jun 21, 2006 10:34 pm    Post subject: Reply with quote

lspci -vvn | grep -i 14e4:

Code:

02:00.0 0200: 14e4:170c (rev 02)
02:03.0 0280: 14e4:4319 (rev 02)


I have no idea what that means, but I hope it helps.
Back to top
View user's profile Send private message
Havin_it
Veteran
Veteran


Joined: 17 Jul 2005
Posts: 1172
Location: Edinburgh, UK

PostPosted: Wed Jun 21, 2006 11:37 pm    Post subject: Reply with quote

Heyy, been ignoring this for awhile, but I see it's now made it into the new kernel.

Have they got Ad-hoc or Master modes working yet?
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Thu Jun 22, 2006 4:46 am    Post subject: Reply with quote

Havin_it:
There are patches for master mode and the devicescape stack. Ad-hoc is still not working.

magfrump:
It doesn't look like those patches made it in for 2.6.17. The 4319 is a 4318 with 802.11a support. It should work if you add the pci id as in http://dev.gentoo.org/~josejx/4319.patch.
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
magfrump
n00b
n00b


Joined: 10 Aug 2005
Posts: 19
Location: Arcata, CA

PostPosted: Thu Jun 22, 2006 4:04 pm    Post subject: Reply with quote

JoseJX: Thank you--but what do I do with the patch?
Back to top
View user's profile Send private message
JoseJX
Retired Dev
Retired Dev


Joined: 28 Apr 2002
Posts: 2774

PostPosted: Thu Jun 22, 2006 4:06 pm    Post subject: Reply with quote

Patch your kernel source with it.
_________________
Gentoo PPC FAQ: http://www.gentoo.org/doc/en/gentoo-ppc-faq.xml
Back to top
View user's profile Send private message
b_koepke
n00b
n00b


Joined: 02 Jun 2006
Posts: 53

PostPosted: Fri Jun 23, 2006 12:31 am    Post subject: >1G amd64 workaround Reply with quote

Has anybody found a work around for >1G ram in amd64
I recently added more ram and now all I get it a kernel panic when I bring the device up
(btw driver works flawlessly in x86)
(4318 chipset so PIO is not an option)
Back to top
View user's profile Send private message
Dreoth
n00b
n00b


Joined: 15 Jul 2003
Posts: 6

PostPosted: Fri Jun 23, 2006 11:40 pm    Post subject: BCM4306 on Dell Inspiron 9100 Reply with quote

I've got a Dell TrueMobile 1350 Mini-PCI Card, 0x1028 0x0003 that I've been struggling to get working for a while now.

Every time I ifup the card, I face a kernel panic within moments and I can't seem to figure out why. At first I thought it was SMP (Pentium 4 with hyperthreading) but I've disabled that in the kernel, and even the BIOS to try and stop it (similar to the problem in ndiswrapper?).

I'm using the vanilla 2.6.17 kernel, I've read through this entire thread and nothing has helped me resolve this. :(

One of the kernel panics, kernel non-smp:
Code:

Process events/0 (pid: 3, threadinfo=c05dd000 task=dff82030)
Stack: 00000096 c05ddfc4 de01cc28 00008000 00000000 e0d58b08 de01cc28 c05ddfc4
          00000000 00000000 00000003 c14737d0 00000082 20000000 00000282 00000000
          00000082 00000000 00000000 00000000 00000000 c05f6d40 c01033b6 00000020
Call Trace:
 <e0d5b08> bcm43xx_interrupt_tasklet+0x78b/0x858 [bcm43xx] <c01033b6> common_interrupt+0x1a/0x20
 <c011d022> tasklet_action+0x37/0x58 <c011d077> __do_softirq+0x34/0x7f
 <c0104c3e> do_softirq+0x38/0x42
 =======================
<c0104bfe> do_IRQ+0x46/0x4e <c01033b6> common_interrupt+0x1a/0x20
<e0d57cc2> bcm43xx_ieee80211_set_chan+0xa3/0xa8 [bcm43xx] <e0b5c5c4> ieee80211softmac_scan+0x32/0xed [ieee80211softmac]
<c01248aa> run_workqueue+0x69/0x97 <e0b5c592> ieee80211softmac_scan+0x0/0xed [ieee80211softmac]
<c0124bcb> worker_thread+0x0/0x111 <c0124caa> worker_thread+0xdf/0x111
<c0116a16> default_wake_function+0x0/0xc2 <c0101005> kernel_thread_helper+0x5/0xb
Code: bd d6 e0 68 a7 02 00 00 68 a0 e3 d6 e0 68 aa e5 d6 e0 68 d4 e3 d6 e0 e8 e7 17 3b df 31 f6 83 c4 14 89 dd 81 e5 ff 0f 00 00 78 05 <3b> 6e 14 7c 21 68 04 bd d6 e0 68 aa 02 00 00 68 a0 e3 d6 e0 68
EIP: [<e0d684d8>] bcm43xx_dma_handle_xmitstatus+0x11f/0x30d [bcm43xx] SS:ESP 0068:c05ddf60
<0> Kernel panic - not syncing: Fatal exception in interrupt


I've posted a similar post to the bcm43xx dev mailing list and their installation support forums.

Is anybody able to help me with this, I'm seriously at a loss here. :(
Back to top
View user's profile Send private message
Akaihiryuu
l33t
l33t


Joined: 08 May 2003
Posts: 751
Location: Columbus, OH

PostPosted: Sat Jun 24, 2006 7:47 pm    Post subject: Reply with quote

Still absolutely no luck. I had my hopes up that 2.6.17 was going to improve things, but this driver just does not work for me. I have a Broadcom 4306, and I have all of the firmware files installed. The interface will go up, everything seems to work until I try to actually connect to an AP (open, WEP, doesn't matter), then the whole thing dies. I've been trying to use this driver since January, and it has never once worked.

Code:
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1130
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1130
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1130
Jun 24 15:39:32 samus bcm43xx: TODO: Incomplete code in keymac_write() at
drivers/net/wireless/bcm43xx/bcm43xx_main.c:1130
Jun 24 15:39:33 samus bcm43xx: Card IRQ register not responding. Giving up.
Jun 24 15:39:33 samus ieee80211_crypt: registered algorithm 'WEP'


I'm giving up now. As of now, I'm going to try to find a mini-PCI card for my laptop that will work without ndiswrapper. I've put way too many hours into trying to make this work. I understand that reverse engineering is hard work and that the driver does work for some people, but it just won't work for me. Which wireless chipsets are best for Linux? The only one I've ever really heard good things about is Prism.
Back to top
View user's profile Send private message
Dreoth
n00b
n00b


Joined: 15 Jul 2003
Posts: 6

PostPosted: Sat Jun 24, 2006 8:21 pm    Post subject: BCM4306 on Dell Inspiron 9100 [RESOLVED] Reply with quote

Thanks to those in the bcm43xx dev-lists for helping me fix my issue

Make sure you are using a 3.x driver!!!
bcm43xx-fwcutter -i driver.sys will let you know!

The solution was to use a 3.x driver version, turns out I was using a 4.x and hadn't encountered any prior warning about doing so. Most of the instructions I encountered used recent Windows system drivers, so I was using the latest from the dell site...

Bad Driver:
bcmwl5.sys
version 4.10.40.0
md5: 30d20fc98bcfd52e1da778cf19b223d4

The wl_apsta.o found in the README will work...

Again, thanks to those who have helped me!
Back to top
View user's profile Send private message
Akaihiryuu
l33t
l33t


Joined: 08 May 2003
Posts: 751
Location: Columbus, OH

PostPosted: Sat Jun 24, 2006 9:35 pm    Post subject: Reply with quote

I decided to give it one more try. Part of my problem is nickname has to be set to the same thing as the ESSID or nothing will happen. However, even trying to associate manually, it still doesn't work.

Code:
Jun 24 17:20:40 samus bcm43xx: PHY connected
Jun 24 17:20:40 samus bcm43xx: Radio turned on
Jun 24 17:20:40 samus bcm43xx: Chip initialized
Jun 24 17:20:40 samus bcm43xx: DMA initialized
Jun 24 17:20:40 samus bcm43xx: 80211 cores initialized
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1128
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1130
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1130
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1130
Jun 24 17:20:40 samus bcm43xx: TODO: Incomplete code in keymac_write() at drivers/net/wireless/bcm43xx/bcm43xx_main.c:1130
Jun 24 17:20:40 samus bcm43xx: Keys cleared
Jun 24 17:20:40 samus bcm43xx: Controller restarted
Jun 24 17:20:40 samus SoftMAC: Queueing Authentication Request to 00:13:46:1c:ca:cd
Jun 24 17:20:40 samus SoftMAC: cannot associate without being authenticated, requested authentication
Jun 24 17:20:40 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:20:45 samus SoftMAC: Open Authentication completed with 00:13:46:1c:ca:cd
Jun 24 17:20:45 samus SoftMAC: sent association request!
Jun 24 17:20:45 samus SoftMAC: sent association request!
Jun 24 17:20:50 samus SoftMAC: assoc request timed out!
Jun 24 17:21:30 samus bcm43xx: set security called
Jun 24 17:21:30 samus bcm43xx:    .level = 1
Jun 24 17:21:30 samus bcm43xx:    .enabled = 1
Jun 24 17:21:30 samus bcm43xx:    .encrypt = 1
Jun 24 17:21:30 samus SoftMAC: Associate: Scanning for networks first.
Jun 24 17:21:30 samus SoftMAC: Start scanning with channel: 1
Jun 24 17:21:30 samus SoftMAC: Scanning 14 channels
Jun 24 17:21:31 samus SoftMAC: Scanning finished
Jun 24 17:21:31 samus SoftMAC: Queueing Authentication Request to 00:13:46:1c:ca:cd
Jun 24 17:21:31 samus SoftMAC: cannot associate without being authenticated, requested authentication
Jun 24 17:21:31 samus SoftMAC: sent association request!
Jun 24 17:21:31 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:21:36 samus SoftMAC: assoc request timed out!
Jun 24 17:21:43 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:21:55 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:22:07 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:22:19 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:22:31 samus SoftMAC: Authentication timed out with 00:13:46:1c:ca:cd
Jun 24 17:22:31 samus SoftMAC: Associate: Scanning for networks first.
Jun 24 17:22:31 samus SoftMAC: Start scanning with channel: 1
Jun 24 17:22:31 samus SoftMAC: Scanning 14 channels
Jun 24 17:22:31 samus SoftMAC: Scanning finished
Jun 24 17:22:31 samus SoftMAC: Queueing Authentication Request to 00:13:46:1c:ca:cd
Jun 24 17:22:31 samus SoftMAC: cannot associate without being authenticated, requested authentication
Jun 24 17:22:31 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:22:43 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:22:55 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:23:07 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:23:19 samus SoftMAC: Sent Authentication Request to 00:13:46:1c:ca:cd.
Jun 24 17:23:31 samus SoftMAC: Authentication timed out with 00:13:46:1c:ca:cd
Jun 24 17:23:31 samus SoftMAC: sent association request!
Jun 24 17:23:36 samus SoftMAC: assoc request timed out!


This is as far as I have ever been able to get. It doesn't matter if the AP in question is b, g, WEP, or open.
Back to top
View user's profile Send private message
bdm
Guru
Guru


Joined: 20 Jan 2006
Posts: 305
Location: Canada, Barrie, Ontario

PostPosted: Mon Jun 26, 2006 5:25 pm    Post subject: Reply with quote

I'm still trying to get my wireless card (Linksys WMP54GS 54mbps) under Gentoo x86. But had a question before I start this approach. Will using this method instead of ndiswrapper make me loose some connectivity?

Thanks.
Back to top
View user's profile Send private message
Display posts from previous:   
This topic is locked: you cannot edit posts or make replies.    Gentoo Forums Forum Index Gentoo on PPC All times are GMT
Goto page Previous  1, 2, 3 ... 26, 27, 28 ... 40, 41, 42  Next
Page 27 of 42

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum