Gentoo Forums
Gentoo Forums
Gentoo Forums
Quick Search: in
kororaa XGL gentoo livecd
View unanswered posts
View posts from last 24 hours

 
Reply to topic    Gentoo Forums Forum Index Duplicate Threads
View previous topic :: View next topic  
Author Message
gm7uac
n00b
n00b


Joined: 17 Apr 2004
Posts: 57
Location: Glasgow

PostPosted: Mon Mar 27, 2006 10:38 pm    Post subject: kororaa XGL gentoo livecd Reply with quote

download the livecd....wow!!!!

http://kororaa.org

output from my dmesg.

Linux version 2.6.14-kororaa-r6 (root@goliath32) (gcc version 3.4.5 (Gentoo 3.4. 5-r1, ssp-3.4.5-1.0, pie-8.7.9)) #3 SMP PREEMPT Sat Mar 4 02:27:59 Local time zo ne must be set--s
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa8a0
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x1fff00c0
ACPI: DSDT (v001 VIA KT266A 0x00001000 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
Built 1 zonelists
Kernel command line: initrd=kororaa.igz init=/linuxrc root=/dev/ram0 looptype=sq uashfs loop=/livecd.squashfs cdroot nokeymap BOOT_IMAGE=kororaa
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1751.422 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 511456k/524224k available (3321k kernel code, 12072k reserved, 948k data , 268k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3503.45 BogoMIPS (lpj=1751726)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 0 0000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 0000000 0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
mtrr: v2.0 (20020519)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: AMD Athlon(tm) XP 2200+ stepping 00
Total of 1 processors activated (3503.45 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 2027k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by vt8235 PM
PCI quirk: region 0400-040f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: dfc00000-dfcfffff
PREFETCH window: 9fb00000-dfafffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
Machine check exception polling timer started.
cpufreq: No nForce2 chipset.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Loading Reiser4. See www.namesys.com for a description of Reiser4.
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
Initializing Cryptographic API
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
Using specific hotkey driver
ACPI: CPU0 (power states: C1[C1])
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 15
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST39120A, ATA DISK drive
hdb: Maxtor 6Y120P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SONY DVD-ROM DDU1613, ATAPI CD/DVD-ROM drive
hdd: LITE-ON COMBO SOHC-5232K, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 17803297 sectors (9115 MB) w/512KiB Cache, CHS=17662/16/63, UDMA(66)
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
hdb: cache flushes supported
hdb: hdb1 hdb2 hdb3 hdb4
hdc: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache
libata version 1.12 loaded.
Fusion MPT base driver 3.03.03
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.03
Fusion MPT FC Host driver 3.03.03
Fusion MPT SAS Host driver 3.03.03
Fusion MPT misc device (ioctl) driver 3.03.03
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 4784.000 MB/sec
raid5: using function: pIII_sse (4784.000 MB/sec)
raid6: int32x1 722 MB/s
raid6: int32x2 890 MB/s
raid6: int32x4 578 MB/s
raid6: int32x8 582 MB/s
raid6: mmxx1 1453 MB/s
raid6: mmxx2 2554 MB/s
input: AT Translated Set 2 keyboard on isa0060/serio0
raid6: sse1x1 1394 MB/s
raid6: sse1x2 2273 MB/s
raid6: using algorithm sse1x2 (2273 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: faulty personality registered as nr 10
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.39
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP route cache hash table entries: 8192 (order: 3, 32768 bytes)
TCP established hash table entries: 32768 (order: 6, 393216 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Processor cpuid 6a0 not supported
Using IPI Shortcut mode
Freeing unused kernel memory: 268k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 16
PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 0
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 16, io mem 0xdffffe00
ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
usb 1-6: new high speed USB device using ehci_hcd and address 2
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 16
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 0
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 16, io base 0x0000dc00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 16
PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 0
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 16, io base 0x0000e000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 16
PCI: Via IRQ fixup for 0000:00:10.2, from 3 to 0
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 16, io base 0x0000e400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
ieee1394: sbp2: Try serialize_io=0 for better performance
ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on h da
<4>reiser4[mount(1732)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hda: wrong master super block magic
VFS: Can't find ext3 filesystem on dev hda.
VFS: Can't find an ext2 filesystem on dev hda.
cramfs: wrong magic
SQUASHFS error: Can't find a SQUASHFS superblock on hda
Unable to identify CD-ROM format.
UDF-fs: No partition found (1)
ReiserFS: hda1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda1
<4>reiser4[mount(1736)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hda1: wrong master super block magic
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda2
<4>reiser4[mount(1743)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hda2: wrong master super block magic
VFS: Can't find ext3 filesystem on dev hda2.
VFS: Can't find an ext2 filesystem on dev hda2.
cramfs: wrong magic
SQUASHFS error: Can't find a SQUASHFS superblock on hda2
Unable to identify CD-ROM format.
UDF-fs: No VRS found
ReiserFS: hda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda3
<4>reiser4[mount(1747)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hda3: wrong master super block magic
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hdb: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on h db
<4>reiser4[mount(1754)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hdb: wrong master super block magic
VFS: Can't find ext3 filesystem on dev hdb.
VFS: Can't find an ext2 filesystem on dev hdb.
cramfs: wrong magic
SQUASHFS error: Can't find a SQUASHFS superblock on hdb
Unable to identify CD-ROM format.
UDF-fs: No partition found (1)
ReiserFS: hdb1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb1
<4>reiser4[mount(1758)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hdb1: wrong master super block magic
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hdb2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb2
<4>reiser4[mount(1765)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hdb2: wrong master super block magic
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hdb3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb3
<4>reiser4[mount(1772)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hdb3: wrong master super block magic
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hdb4: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdb4
<4>reiser4[mount(1779)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hdb4: wrong master super block magic
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
ReiserFS: hdd: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on h dd
<4>reiser4[mount(1790)]: init_read_super (fs/reiser4/init_super.c:602)[nikita-26 08]:
WARNING: hdd: wrong master super block magic
VFS: Can't find ext3 filesystem on dev hdd.
VFS: Can't find an ext2 filesystem on dev hdd.
cramfs: wrong magic
SQUASHFS error: Can't find a SQUASHFS superblock on hdd
ISO 9660 Extensions: RRIP_1991A
Vendor: I-Stick2 Model: IntelligentStick Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 255488 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 255488 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP ,DMA]
pnp: Device 00:02 disabled.
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 17
PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 1
eth0: VIA Rhine II at 0xdffffd00, 00:0c:6e:6a:43:f4, IRQ 17.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
irda_init()
NET: Registered protocol family 23
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 18
bttv0: Bt878 (rev 2) at 0000:00:0b.0, irq: 18, latency: 64, mmio: 0xdfbfe000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tveeprom 0-0050: Hauppauge model 61205, rev BM , serial# 3033663
tveeprom 0-0050: tuner model is Philips FI1246 MK2 (idx 11, type 1)
tveeprom 0-0050: TV standards PAL(I) (eeprom 0x10)
tveeprom 0-0050: audio processor is None (idx 0)
tveeprom 0-0050: has no radio
bttv0: using tuner=1
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 1 (Philips PAL_I (FI1246 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:0b.1[A] -> GSI 19 (level, low) -> IRQ 18
bt878(0): Bt878 (rev 2) at 00:0b.1, irq: 18, latency: 64, memory: 0xdfbff000
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 256M @ 0xe0000000
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 19
cdrom: open failed.
pcnet32.c:v1.30j 29.04.2005 tsbogend@alpha.franken.de
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 20
pcnet32: PCnet/FAST 79C971 at 0xec00, 00 04 ac de 8f 36
tx_start_pt(0x0c00):~220 bytes, BCR18(6861):BurstWrEn BurstRdEn NoUFlow
SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 20.
eth1: registered as PCnet/FAST 79C971
pcnet32: 1 cards_found.
eth1: link down
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pnp: Device 00:02 activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP ,DMA]
input: PC Speaker
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERM ANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
[fglrx] module loaded - fglrx 8.22.5 [Feb 7 2006] on minor 0
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] Kernel AGP support doesn't provide agplock functionality.
[fglrx] AGP detected, AgpState = 0x1f000217 (hardware caps of chipset)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000314 (selected caps)
[fglrx] free AGP = 256126976
[fglrx] max AGP = 256126976
[fglrx] free LFB = 122679296
[fglrx] max LFB = 122679296
[fglrx] free Inv = 134217728
[fglrx] max Inv = 134217728
[fglrx] total Inv = 134217728
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 65536
_________________
If all else fails RTFM.
Back to top
View user's profile Send private message
kfiaciarka
Veteran
Veteran


Joined: 20 May 2005
Posts: 1498
Location: Dobre Miasto, Poland

PostPosted: Mon Mar 27, 2006 11:10 pm    Post subject: Reply with quote

So what's the problem?
Back to top
View user's profile Send private message
gm7uac
n00b
n00b


Joined: 17 Apr 2004
Posts: 57
Location: Glasgow

PostPosted: Mon Mar 27, 2006 11:28 pm    Post subject: Reply with quote

This is a forum for posting intresting information on gentoo in general :D
_________________
If all else fails RTFM.
Back to top
View user's profile Send private message
mark_alec
Bodhisattva
Bodhisattva


Joined: 11 Sep 2004
Posts: 6066
Location: Melbourne, Australia

PostPosted: Tue Mar 28, 2006 8:03 am    Post subject: Reply with quote

Moved from Desktop Environments to Duplicate Threads.

See https://forums.gentoo.org/viewtopic-t-441235.html
Back to top
View user's profile Send private message
Display posts from previous:   
Reply to topic    Gentoo Forums Forum Index Duplicate Threads All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum